All‐trans retinoic acid release from polyion‐complex micelles of methoxy poly(ethylene glycol) grafted chitosan

We synthesized a methoxy poly(ethylene glycol) grafted chitosan (ChitoPEG) copolymer to prepare a retinoic acid (RA) encapsulated polymeric micelle. The RA‐encapsulated polymeric micelle of the ChitoPEG copolymer had a particle size of 100–500 nm and a spherical shape when observed by transmission electron microscopy. In a ¹H‐NMR study, the specific peaks of RA and chitosan as a drug‐carrying inner core disappeared in deuterium oxide, and only the specific peak of methoxy poly (ethylene glycol) (MPEG) was observed, whereas specific peaks of MPEG, RA, and chitosan appeared in dimethyl sulfoxide. This indicated that the RA/ChitoPEG ion complexes were composed of a polymeric micelle with a core–shell structure and that free drug did not exist in the polymeric micelle formulations. Other evidence of drug incorporation into the polymeric micelle was witnessed in a differential scanning calorimetry analysis. The melting peaks of RA and chitosan were 182 and 220°C, respectively. The melting peak of the polymeric micelle was 200°C, whereas the melting peaks of the physical mixtures were those of both RA and the ChitoPEG copolymer. The lyophilized polymeric micelle was successfully reconstituted into phosphate‐buffered saline without the aid of cryoprotectants. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Release of diclofenac through gluteraldehyde crosslinked poly(vinyl alcohol)/poly(acrylic acid) alloy membranes

A controlled‐release preparation of diclofenac sodium for transdermal administration has been developed. Poly(vinyl alcohol) (PVA) and PVA/poly(acrylic acid) (PAA) alloy membranes were prepared from a solvent‐casting technique using different PVA/PAA (v/v) ratios. The release of the drug from the membrane was evaluated under in vitro conditions at pH 7.4. The delivery system provided linear release without time lag, burst effect, and boundary layer resistance. Effects of variables such as film thickness and PVA/PAA ratio on the permeation behavior of the polymeric membranes were discussed. The optimal PVA/PAA was determined as 50/50. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 72–77, 2004     

Sustained release behavior of pH‐responsive poly(vinyl alcohol)/poly(acrylic acid) hydrogels containing activated carbon fibers

The composites of pH‐responsive poly(vinyl alcohol)/poly(acrylic acid) hydrogel and activated carbon fibers (ACFs) were prepared as sustained drug release system with excellent mechanical properties. The mechanical properties of hydrogels were improved greatly by addition of ACFs. The thinner ACFs were more effective in increasing the mechanical properties of composite hydrogels. The cumulative amount of release and the release period were dependent on the surface area and the pore volume of ACFs. The drug release was maximized at basic condition due to the pH‐sensitive hydrogel matrices and the initial bust phenomenon was alleviated by incorporating ACFs in the hydrogels. The drug release was sustained about four times longer and the mechanical property was increased about 2.6 times higher because ACFs worked as drug reservoir and reinforcement. Cytotoxicity evaluation confirmed the biocompatible characteristics of the ACFs‐containing hydrogels. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Self‐assembled micelles prepared from poly(ɛ‐caprolactone)–poly(ethylene glycol) and poly(ɛ‐caprolactone/glycolide)–poly(ethylene glycol) block copolymers for sustained drug delivery

A series of poly(?‐caprolactone)–poly(ethylene glycol) (PCL‐PEG) and poly(?‐caprolactone/glycolide)–poly(ethylene glycol) [P(CL/GA)‐PEG] diblock copolymers were prepared by ring‐opening polymerization of ?‐caprolactone or a mixture of ?‐caprolactone and glycolide using monomethoxy PEG (mPEG) as macroinitiator and Sn(Oct)₂ as catalyst. The resulting copolymers were characterized using ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and wide‐angle X‐ray diffraction. Copolymer micelles were prepared using the nanoprecipitation method. The morphology of the micelles was spherical or worm‐like as revealed by transmission electron microscopy, depending on the copolymer composition and the length of the hydrophobic block. Introduction of the glycolide component, even in small amounts (CL/GA = 10), disrupted the chain structure and led to the formation of spherical micelles. Interestingly, the micelle size decreased with the encapsulation of paclitaxel. Micelles prepared from mPEG5000‐derived copolymers exhibited better drug loading properties and slower drug release than those from mPEG2000‐derived copolymers. Drug release was faster for copolymers with shorter PCL blocks than for those with longer PCL chains. The introduction of glycolide moieties enhanced drug release, but the overall release rate did not exceed 10% in 30 days. In contrast, drug release was enhanced in acidic media. Therefore, these bioresorbable micelles and especially P(CL/GA)‐PEG micelles with excellent stability, high drug loading content, and prolonged drug release could be promising for applications as drug carriers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45732.     

Epoxidized poly(N‐isopropyl acrylamide)‐b‐epoHTPB‐b‐poly(N‐isopropyl acrylamide) triblock copolymer micelle nanoparticles for 10‐hydroxycamptothecin drug release

Thermoresponsive poly(N‐isopropyl acrylamide) (PNIPAM)‐block‐hydroxy‐terminated polybutadine‐block‐PNIPAM triblock copolymers were synthesized by atom transfer radical polymerization; this was followed by the in situ epoxidation reaction of peracetic acid. The copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, and size exclusion chromatography measurements, and their physicochemical properties in aqueous solution were investigated by surface tension measurement, fluorescent spectrometry, ultraviolet–visible transmittance, transmission electron microscopy observations, dynamic light scattering, and so on. The experimental results indicate that the epoxidized copolymer micelle aggregates retained a spherical core–shell micelle structure similar to the control sample. However, they possessed a decreased critical aggregate concentration (CAC), increased hydrodynamic diameters, and a high aggregation number and cloud point because of the incorporation of epoxy groups and so on. In particular, the epoxidized copolymer micelles assumed an improved loading capacity and entrapment efficiency of the drug, a preferable drug‐release profiles without an initial burst release, and a low cytotoxicity. Therefore, they were more suitable for the loading and delivery of the hydrophobic drug as a controlled release drug carrier. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41877.     

Properties of chitosan/poly(vinyl alcohol) films for drug‐controlled release

With bovine serum albumin (BSA) as a model drug, drug‐loaded films of chitosan (CS) and poly(vinyl alcohol) (PVA) were obtained by a casting/solvent evaporation method and crosslinked by tripolyphosphate (TPP). The films were characterized by FTIR, XRD, and SEM. The influential factors of drug‐loaded films on drug‐controlled release were studied. These factors included, primarily, the component ratio of CS and PVA, the loaded amount of BSA, the pH and ionic strength of the release solution, and the crosslinking time with TPP. The results showed that within 25 h, when the weight ratios of CS to PVA in the drug‐loaded films were 90 : 10, 70 : 30, 50 : 50, and 30 : 50, the cumulative release rates of BSA were 63.3, 72.9, 81.8, and 91.8%, respectively; when the amounts of model drug were 0.1, 0.2, and 0.3 g, the release rates were 100, 81.8, and 59.6%, respectively; when the pH values of the drug release medium were 1.0, 3.8, 5.4, and 7.4, the release rates reached 100, 100, 37.9, and 7.8%, respectively; the cumulative release rates of BSA were 78.4, 82.3, 84.3, and 91.7% when the ionic strengths of the release solution were, respectively, 0.1, 0.2, 0.3, and 0.4M; when the crosslinking times of these drug films in the TPP solution were 0, 5, 15, 30, and 60 min, the release rates attained 100, 100, 81.8, 65, and 43.3%, respectively. All the results indicated that the CS/PVA film was useful in drug delivery systems. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 808–813, 2005     

pH‐sensitive polyelectrolyte films derived from submicron chitosan/Eudragit® L 100‐55 complexes: Physicochemical characterization and in vitro drug release

The objectives of this study were to prepare films from submicron chitosan/Eudragit^® L100‐55 polyelectrolyte complexes (CH/EL PEC) and to assess the influence of CH molecular weight and CH/EL mass ratio on their structure and drug‐release properties. The films were obtained by a simple, environmentally friendly, casting/solvent evaporation method and the verapamil hydrochloride (VH) was used as model drug. Submicron size, narrow size distribution, and acceptable stability of CH/EL PECs were confirmed by DLS and laser Doppler microelectrophoresis. SEM analysis revealed nonporous inner structure and flat surface of the films. Interactions between comprising polymers and formation of CH/EL PEC were established by DSC and FT‐IR spectroscopy. In vitro swelling and drug release studies revealed the pH sensitivity of the films, with burst drug release in acidic conditions (pH 1.2) and sustained release in phosphate buffers pH 5.8, 6.8, and 7.4. The slowest VH release was achieved from the films prepared from equal amounts of EL and CH of higher molecular weight, confirming the significance of the CH/EL ratio and CH molecular weight on their ability to sustain drug release. The obtained results suggested that presented, simple, and eco‐friendly preparation procedure can be used to obtain pH‐sensitive CH/EL PEC films with a promising potential as drug carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42583.     

Rapid and efficient sprayed multilayer films for controlled drug delivery

The speed and scalability of film fabrication can dictate the translation of technologies from the laboratory scale to industrial level mass production. Spray‐assisted layer‐by‐layer (LbL) film assembly enables the rapid coating of geometrically complex and porous substrates with functional polyelectrolyte multilayers. Unfortunately, the encapsulation efficiency can be as low as one percent, making this technique prohibitively costly with even modestly priced materials. Herein, we used containment chambers to separately capture the aerosolized solutions for each step in the spray‐LbL process and analyzed the effect of recycling on multilayer film assembly. With potential biomedical applications, we studied the controlled release films of (Poly 2/heparin/lysozyme/heparin)_n films and tracked the distribution of lysozyme after film assembly. In a “Conventional” Spray‐LbL protocol, only 6% of the aerosolized lysozyme is incorporated into the film. By collecting and returning the expended solutions to their respective reservoirs (Recycle Spray‐LbL), we increased this efficiency to 15%. We also tuned the final distribution of lysozyme by adjusting the spray times (Optimized Spray‐LbL), which minimized the amount of lysozyme lost to non‐specific adsorption and reduced the fraction of lysozyme lost to the wash step from 30% and 75% (Conventional and Recycle Spray‐LbL, respectively) to 13%. Despite the changes in film assembly parameters, each film demonstrated similar controlled release properties. With the inherent limitations of time and cost facing Dip and Conventional Spray‐LbL technologies, respectively, the implementation of recycling to the latter demonstrates improvements in efficiency and time that may make it more attractive for the manufacture of biomedical coatings. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43563.     

Mechanism analysis of poly(lactic acid) particles formation by mesoscale simulation

In this work, the mechanism analysis of Poly(DL ‐lactic acid) (PLA) particles formation is investigated by dissipative particle dynamics (DPD) simulations. The polymer PLA is usually as a carrier at the drug deliver system (DDS), first, the mechanism analysis of PLA particles formation was preceded on the basis of the blank PLA particles. At the same time, the formation of PLA particles for drug delivery systems has been investigated. The results of DPD simulations indicate that the formation of PLA particles with drug or not, consists of three steps: (1) aggregation‐individual PLA chains got aggregated with each other in solution; (2) formation and disruption of PLA particles; (3) solidification of PLA particles. At the same time, the effects of PLA, drug content on the aggregation morphology are investigated, which indicates the PLA particles with drug or not aggregated and formed is spherical particles, drug molecules are amorphously and homogeneously distributed inside the PLA matrix, the size of PLA particles increases with increasing the initial PLA content and drug content in the solution. The content of DMF is gotten when PLA chains and drug molecules begin to aggregate and form the particles. These could be used to guide the experimental preparation of PLA blank particles and DDS with desired properties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Layer‐by‐layer assembled hydrogel nanocomposite film with a high loading capacity

The layer‐by‐layer assembly technique is a method that widely used in the preparation of nanostructured multilayer ultrathin films. We fabricated a hydrogel nanocomposite film by alternating the deposition of a core–shell poly[(dimethylimino)(2‐hydroxy‐1,3‐propanedily) chloride] (PDMIHPC)–laponite solution and poly(acrylic acid). The growth of the deposition procedure was proven by ultraviolet–visible spectroscopy and spectroscopic ellipsometry. The surface morphology of the films was observed by scanning electron microscopy. The films could reversibly load and release methylene blue (MB) dye, which was used as an indicator. It took about 4.5 h to reach loading equilibrium at pH 9.0. The loading capacity of the film for MB was as large as 4.48 μg/cm² per bilayer because of the introduction of the core–shell PDMIHPC–laponite as a film component. Nearly 90% of MB was released at pH 3.0 or in a 300 mM NaCl solution within 2.5 h. The loading and release processes were greatly influenced by the ionic strength and pH value of the MB solution. The hydrogel nanocomposite film showed good pH‐triggered loading‐release reversibility and suggested potential applications in controlled drug‐delivery systems and smart materials. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39352.     

Self‐assembly of bovine serum albumin and poly(acrylic acid) induced by noncovalent bonds

Bovine serum albumin/poly(acrylic acid), BSA/PAA, nano‐scaled particles were produced by noncovalent bonds induced self‐assembly method at acid pH area. Proper conditions during preparation process, such as pH value, BSA/PAA weight ratio(WR), PAA molecular weight, were researched by studying the hydrodynamic diameter, polydispersity index, and ζ potential of the nanoparticles. Complex formation between BSA and PAA was studied by FT‐IR, AFM, and TEM. BSA chains are supposed to be partly trapped in the nanoparticles core after interaction with PAA because of the electrostatic attractions and hydrogen bonds interactions between BSA and PAA, while the rest of the BSA chains should form the shell of the nanoparticles. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and self‐assembling behaviors of biotinylated pluronic/poly(lactic acid) biocompatible block copolymers in aqueous solutions

Four kinds of Biotinylated Pluronic/PLA block copolymers were synthesized by two‐step reactions. Pluronic were firstly modified by biotin to obtain B‐Pluronic‐OH. Biotin‐Pluronic‐PLA block copolymers were then produced by ring‐opening polymerization of the monomer L ‐lactide using Biotin‐Pluronic‐OH as the initiator and stannous octoate (Sn(Oct)₂) as the catalyst. The self‐assembling behaviors of Biotin‐Pluronic‐PLA block copolymers in aqueous solutions were examined by fluorescence measurement, dynamic light scattering (DLS), and transmission electron microscopic (TEM) techniques. The size of Biotin‐F127‐PLA‐61, Biotin‐F87‐PLA, and Biotin‐P85‐PLA nanoparticles were determined to be 198, 229, and 257 nm, respectively, and their morphologies were found to be spherical micelles. Biotin‐F127‐PLA‐87 produces both spherical micelles and large compound micelles with the size of 127 and 906 nm. The cytotoxicity studies using human ovarian cancer cells OVCAR‐3 indicate that Biotin‐Pluronic‐PLA block copolymers have good biocompatibility. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Kinetics study of isothermal nicotine release from poly(acrylic acid) hydrogel

The isothermal kinetic of the release of nicotine from a poly(acrylic acid) (PAA) hydrogel was investigated at temperature range from 26°C to 45°C. Specific shape parameters of the kinetic curves, the period of linearity and saturation time were determined. The change in the specific shape parameters of the kinetic curves with temperature and the kinetic parameters of release of nicotine E_a and ln A were determined. By applying the “model fitting” method it was established that the kinetic model of release of nicotine from the PAA hydrogel was [1 − (1 − α)^1/3] = k_Mt. The limiting stage of the kinetics release of nicotine was found to be the contracting volume of the interaction interface. The distribution function of the activation energy was determined and the most probable values of activation energies of 25.5 kJ mol⁻¹ and 35 kJ mol⁻¹ were obtained. Energetically heterogeneity of the interaction interface was explained by the existence of the two different modes of bonding the nicotine molecules onto the hydrogel network by hydrogen bond and electrostatic forces. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Hollow,pH‐sensitive calcium–alginate/poly(acrylic acid) hydrogel beads as drug carriers for vancomycin release

In this study, hollow calcium–alginate/poly(acrylic acid) (PAA) hydrogel beads were prepared by UV polymerization for use as drug carriers. The hollow structure of the beads was fortified by the incorporation of PAA. The beads exhibited different swelling ratios when immersed in media at different pH values; this demonstrated that the prepared hydrogel beads were pH sensitive. A small amount (<9%) of vancomycin that had been incorporated into the beads was released in simulated gastric fluid, whereas a large amount (≤67%) was released in a sustained manner in simulated intestinal fluid. The observed drug‐release profiles demonstrated that the prepared hydrogel beads are ideal candidate carriers for vancomycin delivery into the gastrointestinal tract. Furthermore, the biological response of cells to these hydrogel beads indicated that they exhibited good biological safety and may have additional applications in tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Dual‐responsive semi‐interpenetrating network beads based on calcium alginate/poly(N‐isopropylacrylamide)/poly(sodium acrylate) for sustained drug release

To improve the mechanical strength of natural hydrogels and to obtain a sustained drug‐delivery device, temperature‐/pH‐sensitive hydrogel beads composed of calcium alginate (Ca‐alginate) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared in the presence of poly(sodium acrylate) (PAANa) with ultrahigh molecular weight (M_η ≥ 1.0 × 10⁷) as a strengthening agent. The influence of PAANa content on the properties, including the beads stability, swelling, and drug‐release behaviors, of the hydrogels was evaluated. Scanning electron microscopy and oscillation experiments were used to analyze the structure and mechanical stability of the hydrogel beads, respectively. The results show that stability of the obtained Ca‐alginate/PNIPAAm hydrogel beads strengthened by PAANa the alginate/poly(N‐isopropyl acrylamide) hydrogel bead (SANBs) was significantly improved compared to that of the beads without PAANa (NANBs) at pH 7.4. The swelling behavior and drug‐release capability of the SANBs were markedly dependent on the PAANa content and on the environmental temperature and pH. The bead sample with a higher percentage of PAANa exhibited a lower swelling rate and slower drug release. The drug release profiles from SANBs were further studied in simulated intestinal fluid, and the results demonstrated here suggest that SANBs could serve as a potential candidate for controlled drug delivery in vivo. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of chitosan‐graft‐β‐cyclodextrin for improving the loading and release of doxorubicin in the nanopaticles

Chitosan‐graft‐β‐cyclodextrin (CS‐g‐β‐CD) copolymer was synthesized by conjugating β‐cyclodextrins to chitosan molecules through click chemistry. The copolymer structure was characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR). CS‐g‐β‐CD/CMC nanoparticles were prepared by a polyelectrolyte complexation process in aqueous solution between CS‐g‐β‐CD copolymer and carboxymethyl chitosan (CMC), which was used to load anticancer drug (Doxorubicin hydrochloride, DOX·HCl) with hydrophobic group. The particle size, surface charge, zeta potential, and morphology of the nanoparticles were characterized with dynamic light scattering. The drug loading efficiency and in vitro release of DOX·HCl of the nanoparticles were measured by ultraviolet spectrophotometer. The results demonstrated that the size, surface charge and drug loading efficiency of the nanoparticles could be modulated by the fabrication conditions. The drug loading efficiency of CS‐g‐β‐CD/CMC nanoparticles was improved from 52.7% to 88.1% because of the presence of β‐CD moieties with hydrophobic cavities, which can form inclusion complexes with the drug molecules. The in vitro release results showed that the CS‐g‐β‐CD/CMC nanoparticles released DOX·HCl in a controlled manner, importantly overcoming the initial burst effect. These nanoparticles possess much potential to be developed as anticancer drug delivery systems, especially those drugs with hydrophobic group. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41034.     

Preparation of pH‐sensitive poly(vinyl alcohol‐g‐methacrylic acid) and poly(vinyl alcohol‐g‐acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior

A series of pH‐responsive hydrogels were studied as potential drug carriers for the protection of insulin from the acidic environment of the stomach before releasing in the small intestine. Hydrogels based on poly(vinyl alcohol) networks grafted with acrylic acid or methacrylic acid were prepared by a two‐step process. Poly(vinyl alcohol) hydrogels were prepared by gamma ray irradiation (50 kGy) and then followed by grafting either acrylic acid or methacrylic acid onto these poly(vinyl alcohol) hydrogels with subsequent irradiation (5–20 kGy). These graft hydrogels showed pH‐sensitive swelling behavior and were used as carriers for the controlled release of insulin. The in vitro release of insulin was observed for the insulin‐loaded hydrogels in a simulated intestinal fluid (pH 6.8) but not in a simulated gastric fluid (pH 1.2). The release behavior of insulin in vivo in a rat model confirmed the effectiveness of the oral delivery of insulin to control the level of glucose. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 636–643, 2004     

Influence of laponite on the drug loading and release performance of LbL polyurethane/poly(acrylic acid) multilayers

A facile way to fabricate clay-based multilayers was introduced. Compared to other works, poly(acrylic acid)–laponite nanocomposites (PAA-Lap) were used as a membrane component instead of Lap alone. Coupled with water-soluble polyurethane (PU), a series of PU/PAA-Lap multilayer films were fabricated via layer-by-layer assembly containing different contents of Lap. The effect of clay content on the loading and release behavior of PU/PAA-Lap multilayers was investigated in various pH solutions with cationic methylene blue as the indicator. It was found that the introduction of Lap can influence the charge density, swelling rate, and pH stability of the film. When the content of Lap in the film was increased to a certain degree, the main adsorption mechanism changed from chemical to physical adsorption, but the releasing mechanism had no change. We hope this method can be used as a model for the fabrication of clay-based polymer drug delivery systems in low-pH environments. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47348.     

Synthesis and characterization of cetirizine‐containing,pH‐sensitive acrylic acid/poly(vinyl alcohol) hydrogels

In this study, interpenetrated acrylic acid (AA)/poly(vinyl alcohol) (PVA) hydrogels were prepared by free‐radical polymerization with N,N‐methylene bisacrylamide (MBAAm) as a crosslinker. The basic structural parameters, such as the molecular weight between crosslinks, volume interaction parameter, number of crosslinks, Flory–Huggins solvent interaction parameter, and diffusion coefficient, were calculated. Cetirizine dihydrochloride was loaded as a model drug in selected samples. The prepared hydrogels were evaluated for swelling, sol–gel fraction, and porosity. The swelling of the AA/PVA hydrogels was found to be directly proportional to the pH, that is, 1.2–7.5, depending on composition. The percentage of cetirizine hydrochloride was found to be directly proportional to the buffer pH and was at its maximum at pH 7.5, that is, 90–95%, and its lowest at pH 1.2, that is, 20–30%. The gel fraction increased with increasing concentration of AA and MBAAm, whereas the porosity showed the same response with AA, but an inverse relationship was observed with MBAAm. The drug‐release data were fitted into various kinetics models, including the zero‐order, first‐order, Higuchi, and Peppas models, which showed non‐Fickian diffusion. The prepared hydrogels were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy, and no interaction was found among the polymer ratio and the drug. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43407.     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009