Steam carbon gasification of a nickel based oxygen carrier

Ni-based oxygen carriers are promising candidates for Chemical Looping applications due to a combination of excellent methane conversion performance, mechanical stability, oxygen transfer capacity. However, experiments conducted on NiO/NiAl₂O₄ in a micro-fluidized bed reactor show that methane forms coke on active nickel sites. In subsequent tests, water vapour was fed to the coked Ni oxygen carrier producing a highly concentrated stream of CO/H₂ (1/1). In the absence of water vapour, production of hydrogen dropped with time while a methane/argon mixture was fed to the reactor. Co-feeding water together with methane improves stability - both H₂ production and carbon deposition were constant for over 1 h. Despite the tremendous lay down of carbon, catalytic activity remained stable at levels as low as 3 vol.% water vapour (and 10% methane). Water vapour is an effective oxidant for Ni(0) but is insufficient to entirely re-oxidize the oxygen carrier from Ni to NiO.     

Reactivity of a NiO/Al2O3 oxygen carrier prepared by impregnation for chemical-looping combustion

The reactivity of a Ni-based oxygen carrier prepared by hot incipient wetness impregnation (HIWI) on α-Al₂O₃ with a NiO content of 18 wt% was studied in this work. Pulse experiments with the reduction period divided into 4-s pulses were performed in a fluidized bed reactor at 1223 K using CH₄ as fuel. The number of pulses was between 2 and 12. Information about the gaseous product distribution and secondary reactions during the reduction was obtained. In addition to the direct reaction of the combustible gas with the oxygen carrier, CH₄ steam reforming also had a significant role in the process, forming H₂ and CO. This reaction was catalyzed by metallic Ni in the oxygen carrier and H₂ and CO acted as intermediate products of the combustion. No evidence of carbon deposition was found in any case. Redox cycles were also carried out in a thermogravimetric analyzer (TGA) with H₂ as fuel. Both tests showed that there was a relation between the solid conversion reached during the reduction and the relative amount of NiO and NiAl₂O₄ in the oxygen carrier. When solid conversion increased, the NiO content also increased, and consequently NiAl₂O₄ decreased. Approximately 20% of the reduced nickel was oxidized to NiAl₂O₄, regardless ΔX_s. NiAl₂O₄ was also an active compound for the combustion reaction, but with lower reactivity than NiO. Further, the consequences of these results with respect to the design of a CLC system were investigated. When formation of NiAl₂O₄ occurred, the average reactivity in the fuel reactor decreased. Therefore, the presence of both NiO and NiAl₂O₄ phases must be considered for the design of a CLC facility.     

Reactivity of a spray-dried NiO/NiAl2O4 oxygen carrier for chemical-looping combustion

Kinetic data of a promising oxygen carrier of NiO/NiAl₂O₄ have been established from experiments in a small fluidized bed batch reactor using methane. The particles were prepared by spray-drying using commercially available raw material and selected as the best candidates from an earlier screening study. The particles clearly showed high reactivity, with a maximum gas yield between 86% and 93% in the temperature interval 750 °C to 950 °C when using a bed mass and a gas flow corresponding to only 6 kg/MW_fuel. A comparison of the reactivity with data from TGA experiments showed that the reactivity generally was faster in the batch fluidized bed in the investigated temperature interval. A simple reactor model using kinetic data from the batch fluidized bed reactor and the TGA predicted a minimum mass of 9–24 kg/MW_fuel of oxygen carrier particles for full gas yield of methane to carbon dioxide in the fuel reactor. Comparison with experiments performed in a 10 and 120 kW CLC reactor with the same type of oxygen carrier showed that even when employing 13 to 50 times the amount of oxygen carrier theoretically needed for complete gas conversion, full gas yield was not obtained in the circulating systems. Hence it is of great importance to consider the fluid dynamics and gas-solid contact when modeling the fuel reactor of a chemical-looping combustor.     

NiO/Al2O3 oxygen carriers for chemical-looping combustion prepared by impregnation and deposition-precipitation methods

Ni-based oxygen carriers (OC) with different NiO content were prepared by incipient wet impregnation, at ambient (AI), and hot conditions (HI) and by deposition-precipitation (DP) methods using γ-Al₂O₃ and α-Al₂O₃ as supports. The OC were characterized by BET, Hg porosimetry, mechanical strength, TPR, XRD and SEM/EDX techniques. Reactivity of the OC was measured in a thermogravimetric analyzer and methane combustion selectivity towards CO₂ and H₂O, attrition rate, and agglomeration behavior were analyzed in a batch fluidized bed reactor during multicycle reduction-oxidation tests.XRD and TPR analysis showed the presence of both free NiO and NiAl₂O₄ phases in most of the OC. The interaction of the NiO with the alumina during OC preparation formed NiAl₂O₄ that affected negatively to the OC reactivity and methane combustion selectivity towards CO₂ and H₂O during the reduction reaction. The NiO-alumina interaction was more affected by the support type than by the preparation method used. The NiO-alumina interaction was stronger in the OC prepared on γ-Al₂O₃.The OC were evaluated in the fluidized bed reactor with respect to the agglomeration process. OC prepared by the AI and HI methods with NiO contents up to 25 wt%, OC prepared by the DP method on γ-Al₂O₃ with NiO content lower than 30 wt%, and OC prepared by the DP method on α-Al₂O₃ with a NiO content lower than 26 wt% did not agglomerated. OC that agglomerated showed an external layer of NiO over the particles. It seems that the most important factor affecting to the formation of the external NiO layer on the OC, and so to the agglomeration process, was the metal content of the OC. The attrition rates of the OC prepared using γ-Al₂O₃ as support were higher than the ones prepared using α-Al₂O₃ as support, and in general the attrition rates of all the OC were low.The OC prepared by AI, HI or DP methods on α-Al₂O₃ as support had appropriated characteristics to be used in the chemical-looping combustion process.     

Effect of support on reactivity and selectivity of Ni-based oxygen carriers for chemical-looping combustion

Different Ni-based oxygen carriers were prepared by dry impregnation using γ-Al₂O₃ as support. The reactivity, selectivity during methane combustion, attrition rate and agglomeration behavior of the oxygen carriers were measured and analyzed in a thermogravimetric analyzer and in a batch fluidized bed during multi-cycle reduction-oxidation tests.Ni-based oxygen carriers prepared on γ-Al₂O₃ showed low reactivity and low methane combustion selectivity to CO₂ and H₂O, because most of the impregnated NiO reacted to NiAl₂O₄. To avoid or to minimize the interaction of NiO with alumina some modifications of the support via thermal treatment or chemical deactivation with Mg or Ca oxides were analyzed. Thermal treatment of γ-Al₂O₃ at 1150 °C produced the phase transformation to α-Al₂O₃. Ni-based oxygen carriers prepared on α-Al₂O₃, MgAl₂O₄, or CaAl₂O₄ as support showed very high reactivity and high methane combustion selectivity to CO₂ and H₂O because the interaction between the NiO and the support was decreased. In addition, these oxygen carriers had very low attrition rates and did not show any agglomeration problems during operation in fluidized beds, and so, they seem to be suitable for the chemical-looping combustion process.     

Using continuous and pulse experiments to compare two promising nickel-based oxygen carriers for use in chemical-looping technologies

Chemical-looping technologies have obtained widespread recognition as power or hydrogen production units with inherent carbon capture in a future scenario where CO₂ capture and storage (CCS) is reality. In this paper three different techniques are described; chemical-looping combustion and two categories of chemical-looping reforming. The three techniques are all based on oxygen carriers that are circulating between an air- and a fuel reactor, providing the fuel with undiluted oxygen. Two different oxygen carriers; NiO/NiAl₂O₄ (40/60 wt/wt) and NiO/MgAl₂O₄ (60/40 wt/wt) are compared. Both continuous and pulse experiments were performed in a batch laboratory fluidized bed working at 950 °C using methane as fuel. It was found that pulse experiments offer advantages in comparison to continuous experiments, particularly when evaluating suitable particles for autothermal chemical-looping reforming. Firstly, smaller conversion ranges can be investigated in more detail, and secondly, the onset and extent of carbon formation can be determined more accurately. Of the two oxygen carriers, NiO/MgAl₂O₄ offers several advantages at elevated temperatures, i.e. higher methane conversion, higher selectivity to reforming and lesser tendency for carbon formation.     

Characteristics of the NiO/hexaaluminate for chemical looping combustion

Chemical looping combustion technology has drawn much attention due to advantages such as no NO_x formation and simple CO₂ separation. The thermally stable oxygen carrier in the redox cycle at 1,000–1,400 K is necessary for the chemical lopping combustion. The thermally stable hexaaluminate can be a good candidate for the support material of the oxygen carrier. In this work, NiO/hexaaluminate has been developed in order to apply for chemical looping combustion. From the X-ray diffraction patterns, it was found that most of Ni existed in the form of NiO and NiAl₂O₄ in the obtained sample. The NiO supported on NiAl₂O₄ showed good characteristics in the reduction and oxidation reaction. The present work suggested that NiO/hexaaluminate is a promising material as oxygen carrier for the chemical looping combustion.     

The use of ilmenite as an oxygen carrier in chemical-looping combustion

The feasibility of using ilmenite as oxygen carrier in chemical-looping combustion has been investigated. It was found that ilmenite is an attractive and inexpensive oxygen carrier for chemical-looping combustion. A laboratory fluidized-bed reactor system, simulating chemical-looping combustion by exposing the sample to alternating reducing and oxidizing conditions, was used to investigate the reactivity. During the reducing phase, 15 g of ilmenite with a particle size of 125–180 μm was exposed to a flow of 450 mL_n/min of either methane or syngas (50% CO, 50% H₂) and during the oxidizing phase to a flow of 1000 mL_n/min of 5% O₂ in nitrogen. The ilmenite particles showed no decrease in reactivity in the laboratory experiments after 37 cycles of oxidation and reduction. Equilibrium calculations indicate that the reduced ilmenite is in the form FeTiO₃ and the oxidized carrier is in the form Fe₂TiO₅ + TiO₂. The theoretical oxygen transfer capacity between these oxidation states is 5%. The same oxygen transfer capacity was obtained in the laboratory experiments with syngas. Equilibrium calculations indicate that ilmenite should be able to give high conversion of the gases with the equilibrium ratios CO/(CO₂ + CO) and H₂/(H₂O + H₂) of 0.0006 and 0.0004, respectively. Laboratory experiments suggest a similar ratio for CO. The equilibrium calculations give a reaction enthalpy of the overall oxidation that is 11% higher than for the oxidation of methane per kmol of oxygen. Thus, the reduction from Fe₂TiO₅ + TiO₂ to FeTiO₃ with methane is endothermic, but less endothermic compared to NiO/Ni and Fe₂O₃/Fe₃O₄, and almost similar to Mn₃O₄/MnO.     

Long-term integrity testing of spray-dried particles in a 10-kW chemical-looping combustor using natural gas as fuel

Chemical-looping combustion, CLC, is a combustion concept with inherent separation of CO₂. The fuel and combustion air are kept apart by using an oxygen carrier consisting of metal oxide. The oxygen carriers used in this study were prepared from commercially available raw materials by spray-drying. The aim of the study was to subject the particles to long-term operation (>1000 h) with fuel and study changes in particles, with respect to reactivity and physical characteristics. The experiments were carried out in a 10-kW chemical-looping combustor operating with natural gas as fuel. 1016 h of fuel operation were achieved. The first 405 h were accomplished using a single batch of NiO/NiAl₂O₄-particles. The last 611 h were achieved using a 50/50_mass-mixture of (i) particles used for 405 h, and (ii) a second batch of particles similar in composition to the first batch, but with an MgO additive. Thus, at the conclusion of the test series, approximately half of the particles in the reactor system had been subjected to >1000 h of chemical-looping combustion. The reason for mixing the two batches was to improve the fuel conversion. Fuel conversion was better with the mixture of the two oxygen carriers than it was using only the batch of NiO/NiAl₂O₄-particles. The CO fraction was slightly above the equilibrium fraction at all temperatures. Using the oxygen carrier mixture, the methane fraction was typically 0.4-1% and the combustion efficiency was around 98%. The loss of fines decreased slowly throughout the test period, although the largest decrease was seen during the first 100 h. An estimated particle lifetime of 33 000 h was calculated from the loss of fines. No decrease in reactivity was seen during the test period.     

La1−xSrxFeO3−δ perovskites as redox materials for application in a membrane reactor for simultaneous production of pure hydrogen and synthesis gas

This work reports on the preparation and characterization of perovskitic materials with the general formula La_1−xSr_xFeO₃ (x = 0, 0.3, 0.7, 1) for application in a dense mixed conducting membrane reactor process for simultaneous production of synthesis gas and pure hydrogen. Thermogravimetric experiments indicated that the materials are able to loose and uptake reversibly oxygen from their lattice up to 0.2 oxygen atoms per “mole” for SrFeO₃ with x = 1 at 1000 °C. The capability of the prepared powders to convert CH₄ during the reduction step, in order to produce synthesis gas, as well as their capability to dissociate water during the oxidation step, in order to produce hydrogen were evaluated by pulse reaction experiments in a fixed bed pulse reactor. The high sintering temperatures (1100-1300 °C) required for the densification of the membrane materials result in decreased methane conversion and H₂ yields during the reduction step compared to the corresponding values obtained with the perovskite powders calcined at 1000 °C. Addition of small quantities of NiO, by simple mechanical mixing, to the perovskites after their sintering at high temperatures, increases substantially both their methane decomposition reactivity, their selectivity towards CO and H₂ and their water splitting activity. Maximum H₂ yield during the reduction step is achieved with the La_0.7Sr_0.3FeO₃ sample mixed with 5% NiO and is 80% of the theoretically expected H₂, based on complete methane decomposition. In the oxidation - water splitting step, 912 μmol H₂ per gr solid are produced with the La_0.3Sr_0.7FeO₃ sample mixed with 5% NiO. The experimental results of this work can be equally well applied for the “chemical-looping reforming” process since they concern using the lattice oxygen of the perovskite oxides for methane partial oxidation to syngas, in the absence of molecular oxygen, and subsequent oxidation of the solid.     

Oxidative reforming of methane on structured Ni-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/cordierite catalysts

The catalytic properties of Ni/Al₂O₃ composites supported on ceramic cordierite honeycomb monoliths in oxidative methane reforming are reported. The prereduced catalyst has been tested in a flow reactor using reaction mixtures of the following compositions: in methane oxidation, 2–6% CH₄, 2–9% O₂, Ar; in carbon dioxide and oxidative carbon dioxide reforming of methane, 2–6% CH₄, 6–12% CO₂, and 0–4% O₂, and Ar. Physicochemical studies include the monitoring of the formation and oxidation of carbon, the strength of the Ni-O bond, and the phase composition of the catalyst. The structured Ni-Al₂O₃ catalysts are much more productive in the carbon dioxide reforming of methane than conventional granular catalysts. The catalysts performance is made more stable by regulating the acid-base properties of their surface via the introduction of alkali metal (Na, K) oxides to retard the coking of the surface. Rare-earth metal oxides with a low redox potential (La₂O₃, CeO₂) enhance the activity and stability of Ni-Al₂O₃/cordierite catalysts in the deep and partial oxidation and carbon dioxide reforming of methane. The carbon dioxide reforming of methane on the (NiO + La₂O₃ + Al₂O₃)/cordierite catalyst can be intensified by adding oxygen to the gas feed. This reduces the temperature necessary to reach a high methane conversion and does not exert any significant effect on the selectivity with respect to H₂.     

Pulse study of methane partial oxidation to syngas over SiO2-supported nickel catalysts

Methane was pulsed over pure CuO and NiO as well as Cu/La₂O₃ and Ni/La₂O₃ catalysts at 600° C. Results indicate that the mechanisms for methane activation over copper and nickel are quite different. Over CuO, methane is converted to CO₂ and H₂O, most likely via the combustion mechanism; whereas metallic copper does not activate methane. Over NiO in the presence of metallic nickel sites, methane activation follows the pyrolysis mechanism to give CO, CO₂, H₂ and H₂O. Similar results were obtained over the Cu/La₂O₃ and Ni/La₂O₃ catalysts. XRD investigations indicate that copper and nickel existed as CuLa₂O₄ and LaNiO₃ respectively in the La₂O₃-supported catalysts. The effect of La₂O₃ on the activation of methane is discussed.     

Layered Mg-Al spinel supported Ce-Fe-Zr-O oxygen carriers for chemical looping reforming

A series of layered Mg-Al spinel supported Ce-Fe-Zr-O oxygen carriers were prepared for co-production of syngas and pure hydrogen via chemical looping steam reforming (CLSR). The presence of magnesium-aluminum layered double oxides (MgAl-LDO) significantly increases the specific surface area of the mixed oxides, reduces the particle size of CeO₂-based solid solution and promotes the dispersion of free Fe₂O₃. When reacting with methane, MgAl-LDO supported oxygen carrier shows much lower temperature for methane oxidation than the pure Ce-Fe-Zr-O sample, indicating enhanced low-temperature reactivity. Among different Ce-Fe-Zr-O(x)/MgAl-LDO samples, the Ce-Fe-Zr-O(40 wt%)/MgAl-LDO sample shows the best performance for the selective oxidation of methane to syngas and the H₂ production by water splitting. After a long period of high temperature redox experiment, the Ce-Fe-Zr-O(40 wt%)/MgAl-LDO oxygen carrier still shows high activity for syngas generation. The comparison on the morphology of the fresh and cycled oxygen carriers indicates that the Mg-Al spinel support still forms a stable skeleton structure with high dispersion of active components on the surface after the long-term cycling, which contributes to excellent redox stability of the Ce-Fe-Zr-O(40 wt%)/MgAl-LDO oxygen carrier.     

Catalytic combustion of methane over a highly active and stable NiO/CeO2 catalyst

In the last decades, many reports dealing with technology for the catalytic combustion of methane (CH₄) have been published. Recently, attention has increasingly focused on the synthesis and catalytic activity of nickel oxides. In this paper, a NiO/CeO₂ catalyst with high catalytic performance in methane combustion was synthesized via a facile impregnation method, and its catalytic activity, stability, and water-resistance during CH₄ combustion were investigated. X-ray diffraction, low-temperature N₂ adsorption, thermogravimetric analysis, Fourier transform infrared spectroscopy, hydrogen temperature programmed reduction, methane temperature programmed surface reaction, Raman spectroscopy, electron paramagnetic resonance, and transmission electron microscope characterization of the catalyst were conducted to determine the origin of its high catalytic activity and stability in detail. The incorporation of NiO was found to enhance the concentration of oxygen vacancies, as well as the activity and amount of surface oxygen. As a result, the mobility of bulk oxygen in CeO₂ was increased. The presence of CeO₂ prevented the aggregation of NiO, enhanced reduction by NiO, and provided more oxygen species for the combustion of CH₄. The results of a kinetics study indicated that the reaction order was about 1.07 for CH₄ and about 0.10 for O₂ over the NiO/CeO₂ catalyst.     

Solid fuels in chemical-looping combustion using a NiO-based oxygen carrier

The feasibility of using three different solid fuels in chemical-looping combustion (CLC) has been investigated using NiO as oxygen carrier. A laboratory fluidized-bed reactor system for solid fuel was used, simulating a chemical-looping combustion system by exposing the sample to alternating reducing and oxidizing conditions. In each reducing phase 0.2 g of fuel was added to the reactor containing 20 g oxygen carrier. The experiments were performed at 970 °C. Compared to previously published results with other oxygen carriers the reactivity of the used Ni-particles was considerably lower for the high-sulphur fuel and higher for the low-sulphur fuel. Much more unconverted CO was released and the fuel conversion was much slower for high-sulphur fuel such as petroleum coke, suggesting that the nickel-based oxygen carrier was deactivated by the presence of sulphur. The NiO particles also showed good reactivity with methane and a syngas mixture of 50% H₂ and 50% CO. For all experiments the oxygen carrier showed good fluidizing properties without any signs of agglomeration.     

Highly active and stable Rh/MgOAl2O3 catalysts for methane steam reforming

Highly active and coke-resistant Rh catalysts were developed for methane steam reforming in microchannel chemical reactors. Rh loading was optimized on a stable MgOAl₂O₃ support to improve the volumetric productivity for methane conversion. Catalyst activities were stable over a wide range of steam/carbon ratios. In particular, experimental results demonstrated that Rh/MgOAl₂O₃ catalysts are extremely active for methane steam reforming and are resistant to coke formation at stoichiometric steam/carbon ratio of 1 for over 14 h time-on-stream with no sign of deactivation. Methane steam reforming activities on this catalyst is compared in both a microchannel reactor and a conventional micro-tubular reactor. Significant performance enhancement was observed in microchannel reactors owing to improved heat and mass transfer.     

Simulation and thermodynamic analysis of chemical looping reforming and CO2 enhanced chemical looping reforming

The production of hydrogen from methane via two chemical looping reforming (CLR) processes was simulated and thermodynamically analysed, one process being the conventional CLR process, the other being a CO₂ sorption enhanced process. The aim of the work was to identify suitable operating conditions for obtaining an optimum hydrogen gas purity and yield, whilst operating auto-thermally, at atmospheric pressure and with no carbon formation. In both simulations, the reactors were simulated using the Gibbs minimisation technique. NiO was used as the oxygen storing species, whilst CaO was used as the CO₂ adsorbent.     

The reaction of NiO/NiAl2O4 particles with alternating methane and oxygen

The reduction and oxidation behaviour of oxygen carrier particles of NiO and NiAl₂O₄ has been investigated in a fluidized bed reactor as well as a thermogravimetric analyzer (TGA). The particles showed high reactivity and gas yield to CO₂ with methane in the temperature interval 750–950°C. In the fluidized bed the yield to CO₂ was between 90 and 99% using bed masses corresponding to 16–57 kg/MW_fuel. Complementary experiments in a TGA at 750 and 950°C showed a clear reaction of the NiAl₂O₄ with CH₄ at the higher temperature. There was methane released from the reactor at high degrees of solid oxidation, which is likely associated with the lack of Ni‐sites on the particles which can reform the methane. There was some carbon formation during the reduction, although the amount was minor when the gas yield to carbon dioxide and degree of oxidation of the solid was high. A simple reactor model using kinetic data from a previous study predicted the gas yield during the reduction in the fluidized bed experiments with reasonable accuracy. The oxygen carrier system investigated in this work shows high promise for use in a real CLC system, provided that the particle manufacturing process can be scaled up with reasonable cost.     

Primary reaction steps and active surface sites in the rhodium-catalyzed partial oxidation of methane to CO and H2

The nature of surface sites responsible for methane activation and CO_x formation on Rh catalysts for the partial oxidation of methane to syngas was investigated. The interaction of H₄ with Rh-black after oxidative and reductive pretreatments was studied applying (a) pulse experiments at reduced total pressure (10^–4 Pa) and 1013 K in the temporal-analysis-of-product (TAP) reactor and (b) in situ DRIFTS at 973 K. The saturation of the metal surface sites with oxygen was found to inhibit methane dissociation. Direct methane oxidation to CO₂ on the oxidized surface sites proposed earlier was excluded. Methane is first dissociated on reduced surface sites; the carbon species formed, then, react with surface oxygen to CO₂. Rh sites responsible for methane activation are neither related to the formation of the Rh₂O₃ nor Rh⁰. Probably the partially oxidized species (Rh⁺) or highly dispersed Rh³⁺ entities act as active surface centers for the dissociation of methane. For supported catalyst, such sites are stabilized by the support, which on the other side acts as a source of active oxygen involved in the oxidation of surface carbon and hydrogen.     

Effect of hydrogen addition on formation of hydrogen and carbon from methane decomposition over Ni/Al2O3

The effects of hydrogen addition on the formation of hydrogen and carbon from methane decomposition over Ni/Al₂O₃ were studied. The results show that the added hydrogen in methane greatly affects the methane conversion, hydrogen output rate, and the properties of the carbon deposits on the surface of the Ni/Al₂O₃. The methane conversion and hydrogen output rate are significantly improved by the addition of hydrogen. As the flowrate of hydrogen increases from 0 to 25 mL/min, the initial activity of Ni/Al₂O₃ decreases sharply, while the stability increases first and then decreases due to the suppression of hydrogen to CH₄ decomposition in the thermodynamics equilibrium. When the addition flowrate of the hydrogen is 15 mL/min, that is, 37.5% of the methane flowrate, a much higher methane conversion and the best stability of Ni/Al₂O₃ are obtained. The addition of a specific amount of hydrogen benefits the methane decomposition; however, the excessive hydrogen will suppress the decomposition. Most of the carbon that deposits on the surface of Ni/Al₂O₃ is filamentous carbon when hydrogen is added to the methane, however, encapsulated carbon is mainly produced when no hydrogen is added. In addition, the formation of encapsulated carbon, which deactivates the catalyst, is inhibited by the added hydrogen.