MCM-41介孔分子筛改性研究进展

介绍了有序介孔材料的定义和分类,MCM-41介孔分子筛、合成方法和形成机理,针对其MCM-41目前存在的一些问题,综述了国内外对MCM-41介孔分子筛最新的改性研究进展。     

层状硅酸盐矿物合成MCM-41介孔分子筛的研究进展

文章分别概述了层状硅酸盐矿物和MCM-41介孔分子筛的优势,以及层状硅酸盐矿物合成MCM-41介孔分子筛的优势;综述了膨润土、高岭土、海泡石等层状硅酸盐矿物的提纯与活化方法,层状硅酸盐矿物合成MCM-41介孔分子筛的研究进展;最后就层状硅酸盐矿物合成MCM-41分子筛给出了自己的见解,提出了一些不足之处,并对其发展前景进行了展望。     

微结构单元提高介孔MCM-41分子筛水热稳定性的研究进展

综述了微结构单元提高介孔MCM-41分子筛水热稳定性的主要合成方法和研究现状,系统分析了不同微结构单元对介孔分子筛MCM-41水热稳定性的影响规律,探讨了微结构单元与介孔分子筛水热稳定性之间的关联度,阐释了微结构单元合成镶嵌结构或核壳结构的高水热稳定性介孔分子筛的机理,最后展望了高水热稳定性介孔分子筛的应用前景。     

MCM-41介孔分子筛近期应用研究进展

介绍了近年来MCM-41型介孔分子筛的应用及发展方向,以及一些新型MCM-41材料的出现。其中在吸附和催化方面都涉及到分子筛大量改性的研究。此外,分子筛在医药领域作为缓释剂的发展以及电子领域膜的制备也有新的发现。在MCM-41型介孔分子筛不同的应用中,充当载体的MCM-41型介孔分子筛在负载物的协助下可以得到更有效的实验结果。根据目前的应用发现,发掘MCM-41分子筛的更大潜力是未来研究的进展方向。     

MCM-41介孔分子筛研究进展

介绍了介孔材料的定义,总结了MCM-41介孔分子筛的合成方法,针对其目前存在的孔径较小及酸性较小的缺点,综述了国内外对MCM-41介孔分子筛的孔径扩大分的最新研究进展。     

MCM-41介孔分子筛合成与改性的研究进展

简要介绍了MCM-41介孔分子筛的特点,应用和改性原因.综述了MCM-41介孔分子筛的合成方法,主要包括水热合成法,室温合成法,微波合成法等,列出了每种合成方法的优缺点和合成过程中的影响因素,pH值、晶化时间、晶化温度、模板剂的种类及用量等都会对MCM-41介孔分子筛的结构和孔径产生很大影响.阐述了MCM-41介孔分子筛的改性方法,包括金属杂原子取代法,如主族金属、过渡金属、稀土金属等,有机修饰或功能化法,负载型改性法,如负载金属氧化物、无机酸、杂多酸、有机碱、金属的配合物等.最后就MCM-41介孔分子筛的应用前景做了展望.     

MCM-41介孔分子筛的改性和应用

综述了近年来通过搀杂、有机官能化、负载的方法改性MCM-41介孔分子筛的研究情况,重点介绍了MCM-41介孔分子筛在化工、环保、生物医学领域的应用现状。     

MCM-41-HY介孔-微孔复合分子筛的水热合成

以微孔分子筛HY浆液为母液,合成介孔-微孔复合分子筛MCM-41-HY。通过XRD、NH_3-TPD和N_2吸附-脱附等手段对复合材料进行了表征,并对复合分子筛的水热稳定性进行了考察。结果表明,复合分子筛MCM-41-HY具有中孔分子筛MCM-41和微孔HY型沸石的特点,并且与纯MCM-41分子筛相比,复合分子筛的酸强度明显增强,水热稳定性提高。     

MCM-41分子筛的水热合成、改性及其应用研究进展

介绍了以水热合成法为主的介孔MCM-41分子筛的合成,简述了近几年国内外介孔MCM-41材料的改性,尤其是金属掺杂改性以及杂多酸改性等方面的最新研究,详细介绍了关于功能化的MCM-41在诸多工业反应上的应用,如在烷基化催化、酯化催化、异构化催化等反应中的应用,最后对介孔MCM-41分子筛材料的发展前景以及未来亟需解决的问题进行了展望。     

MCM-41介孔分子筛的改性与应用研究

纯MCM-41介孔分子筛具有稳定的骨架结构、孔道规则排列有序、孔径分布窄等优点,但其水热稳定性较差、酸性弱、孔径不够大、难以用于大分子反应.研究人员采用扩孔改性、金属改性、杂多酸改性和其它改性等方法对MCM-41介孔分子筛进行改性,以改善其催化性能.介绍了MCM-41介孔分子筛的改性及其在石油化工过程中的应用.     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。