Comparative study of hydrophilic and hydrophobic ionic liquids for observing cultured human cells by scanning electron microscopy

An ionic liquid (IL) is a salt that remains in the liquid state at room temperature. It does not vaporize under vacuum and imparts electrical conductivity to samples for observation by scanning electron microscopy (SEM). Recently, the usefulness of ILs has been widely recognized. In our previous study, one of the ILs 1-ethyl-3-methylimidazolium tetrafluoroborate (EtMelm(+) BF(4)(-)) was used for SEM analysis of biological samples. In comparison with the conventional method, samples prepared using EtMelm(+) BF(4)(-) provided more detailed SEM images of the cell ultrastructure, enabling the observation of protrusions. In addition, the IL treatment is a less time consuming and simple method that does not include dehydration, drying, and conductivity treatments, which are an essential parts of the conventional method. In this study, we compared the usefulness of four hydrophobic and three hydrophilic ILs for SEM to observe fixed cultured human A549 cells. All ILs worked well to prevent "charge-up" effect for SEM observation. However, the hydrophilic ILs tended to provide clearer images than the hydrophobic ILs. We concluded that various ILs can be used for SEM sample preparation and their application to a wide range of fields is anticipated in future.     

Scanning electron microscopy with an ionic liquid reveals the loss of mitotic protrusions of cells during the epithelial-mesenchymal transition

Epithelial-mesenchymal transition (EMT) is a key event in cancer metastasis and is characterized by increase in cell motility, increase in expression of mesenchymal cell markers, loss of proteins from cell-to-cell junction complexes, and changes in cell morphology. Here, the morphological effects of a representative EMT inducer, transforming growth factor (TGF)-β1, were investigated in human lung adenocarcinoma (A549) cells and pancreatic carcinoma (Panc-1) cells. TGF-β1 caused morphological changes characteristic of EMT, and immunostaining showed loss of E-cadherin from cell-to-cell junction complexes in addition to the upregulation of the mesenchymal marker vimentin. During scanning electron microscopy (SEM) with an ionic liquid, we observed EMT-specific morphological changes, including the formation of various cell protrusions. Interestingly, filopodia in mitotic cells were clearly observed by SEM, and the number of these filopodia in TFG-β1-treated mitotic cells was reduced significantly. We conclude that this reduction in such mitotic protrusions is a novel effect of TGF-β1 and may contribute to EMT.     

Corrections of magnification and focusing in a cathode lens-equipped scanning electron microscope

One of the well-proven and efficient methods of obtaining a very low-energy impact of primary electrons in the scanning electron microscope is to introduce a retarding field element below the pole piece of the objective lens (OL). It is advantageous to use the specimen alone as the negatively biased electrode (i.e., cathode of the cathode lens). The optical power of the cathode lens modifies some of the standard parameters of the image formation such as relation of working distance to OL excitation or magnification to the scanning coils current, the impact angle of primary electrons, and so forth. In computer-controlled electron microscopes these parameters, particularly with regard to focusing and magnification, can be corrected automatically. Derivation of algorithms for such corrections and their experimental verifications are presented in this paper. Furthermore, a more accurate analytical expression for the focal length of an aperture lens is derived.     

Specimen charging and detection of signal from non-conductors in a cathode lens-equipped scanning electron microscope

This paper concerns the problems connected with the observation of a nonconductive specimen in a scanning electron microscope (SEM) when incident electrons create a surface charge and a corresponding electric field. The special configuration of the cathode lens enables one to control the landing energy of primary electrons via the specimen bias. In the cathode lens, the accelerating electric field at the surface of the specimen combines itself with that of the surface charge in influencing the trajectories of the signal electrons and hence the detected signal level and the possible recapturing of slow secondaries. Recaptured electrons reduce the ultimate positive surface potential, which arises when working below the higher critical energy of electron impact. Computer simulations of electron trajectories were performed for the typical cathode lens configuration and for a model specimen characterized by emission yields similar to those for glass. The simulations brought an extensive set of data about the trajectories of both secondary and backscattered electrons. Furthermore, the data were processed in order to assess the charge balance between the emitted and recaptured electrons as well as the collection efficiency of the detector. The results include values of the ultimate positive surface potential and the detected signal level, both in dependence on the initial energy of the electron impact and the size of the field of view. Finally, the method for the determination of critical energy is reevaluated. This is based on the measurement of the time dependence of the detected signal.     

SEM sample preparation for cells on 3D scaffolds by freeze-drying and HMDS

Common dehydration methods of cells on biomaterials for scanning electron microscopy (SEM) include air drying, hexamethyldisilazane (HMDS) or tetramethysilane (TMS) treatment and critical point drying (CPD). On the other side, freeze-drying has been widely employed in dehydrating biological samples and also in preparing porous biomaterial scaffolds but not in preparing cells on three-dimensional (3D) biomaterials for SEM examination. In this study, we compare cells on porous hydroxyapatite (HA) prepared by air drying, HMDS and freeze-drying. The effects of fixation and using phosphate buffered saline (PBS) in the fixation were also assessed on three porous calcium phosphate (CaP) materials, namely, HA, α-tricalcium phosphate (α-TCP) and β-tricalcium phosphate (β-TCP) samples. There is no significant difference in samples prepared by HMDS treatment and freeze-drying viewed at low magnification. Besides, it is better not to use phosphate buffer in the fixation step for CaP materials to avoid undesirable spontaneous precipitation of CaPs. On the other hand, fewer exchanges of liquids are required for freeze-drying and hence chemical fixation may not be absolutely required for samples prepared by freeze-drying. Other technical details of the preparation were also investigated and discussed. This study suggests both HMDS and freeze-drying can be employed to dehydrate cells on 3D scaffolds for SEM examination.