Novel compact planar electromagnetic band‐gap structure using for ultra‐wideband simultaneous switching noise suppression

In this article, by analyzing the equivalent circuit mode for electromagnetic bandgap (EBG), a novel compact planar EBG structure is proposed for overcoming the drawback of narrow bandwidth of conventional EBG structures. The novel design is based on using meander lines to increase the effective inductance of EBG patches. The simulated and measured results demonstrate the simultaneous switching noise (SSN) can be mitigated with an ultra‐wideband from 280 MHz to 20 GHz at the restraining depth of ?40 dB. Compared with the traditional L‐bridge and meander lines EBG structures, this novel structure has the advantages of suppression bandwidth and fabrication cost. Moreover, signal integrity is achieved by the time‐domain simulation. The proposed structure provides a new kind of theoretical designing reference for EBG structure to improve the bandwidth of restraining SSN. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:429–436, 2014.     

A state‐of‐art review on band‐notch characteristics in UWB antennas

Ultra‐wideband technology has experienced a rapid growth over the last decade for its contribution in different sectors of human society. Printed antennas are considered as preferred platform for implementing this technology because of its alluring characteristics like light weight, low cost, ease of fabrication, integration capability with other systems, etc. Antennas developed for ultra‐wideband applications are desired to have notch characteristics for avoiding interference with other existing radio communication systems. The techniques related to design and developments of printed band‐notched antennas are continuously upgraded for improving the antenna performance. In this article, a comprehensive review has been carried out on ultra‐wideband antennas with band notch characteristics proposed in around last decade. The band notched UWB antennas available in the literature have broadly been classified into five different categories based on their notch characteristics like single band‐notch, dual band‐notch, triple band‐notch, quad/multiple band‐notch, and reconfigurable/tunable band‐notch, respectively. This review exercise may be helpful for beginners working on ultra‐wideband band‐notched antennas and also such a review process is not available in the open literature to the best of author's knowledge.     

A simple planar monopole UWB slot antenna with dual independently and reconfigurable band‐notched characteristics

An extremely simple and compact planar monopole ultrawideband (UWB) slot antenna with dual band‐notched characteristics is proposed. The antenna is composed of a circular radiation patch, a microstrip‐fed line, and a partial ground. By etching an arc‐shaped slot on the radiation patch and a C‐like slot on the feed line, dual notched frequency bands at 3.3–3.7 GHz for WiMAX and 5.15–5.825 GHz for WLAN are achieved. And, the two notched bands can be adjusted independently by varying the length of the slots. Moreover, the band‐notched characteristics can be reconfigurable by shorting the corresponding slots. So, the antenna is capable of operating in one of multiple modes which makes it an excellent candidate for UWB applications. Meanwhile, experimental results indicate that the antenna has an available impendence bandwidth from 2.9 to 11 GHz which covers the UWB frequency band, and nearly omnidirectional patterns, stable gains, small group delay in operating band except rejected bands. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:706–712, 2014.     

Design of a compact protrudent‐shaped ultra‐wideband multiple‐input‐multiple‐output/diversity antenna with band‐rejection capability

In this endeavor, a new multiple‐input‐multiple‐output antenna with a sharp rejection at wireless local area network (WLAN) band is designed and practically examined for portable wireless ultra‐wideband applications. The intended diversity antenna possess a small size of 15 mm × 26 mm and two inverted L‐strip are loaded over the conventional rectangular patch antenna to form protrudent‐shaped radiator that acts as a radiating element. The sharp band‐rejection capability at WLAN is established by incising the L‐shaped slits at the decoupling structure. More than ?21 dB isolation is accomplished for the complete working band (ie, 2.87 ‐17 GHz). Degradation in the antenna efficiency at the center frequency of band rejection corroborates the good interference rejection capability. The working capabilities of the intended antenna are tested by using the isolation between the ports, total efficiency, gain, envelope correlation coefficient, radiation pattern, mean effective gain, and total active reflection coefficient.     

Planar UWB antenna with modified slotted ground plane

A compact coplanar waveguide‐fed (CPW) monopole antenna for ultra‐wideband wireless communication is presented. The proposed antenna comprises of a CPW‐fed beveled rectangular patch with a modified slotted ground. The overall size of the antenna is 30 mm × 27 mm × 1.6 mm. The lower edge of the band is attained by properly decoupling the resonant frequencies due to the extended ground plane and the beveled rectangular patch of the antenna. The upper edge of the radiating band is enhanced by beveling the ground plane corners near the feed point. Experimental results show that the designed antenna operates in the 2.7–12 GHz band, for S₁₁ ≤ ?10 dB with a gain of 2.7–5 dBi. Both the frequency domain and time domain characteristics of the antenna are investigated using antenna transfer function. It is observed that the antenna exhibits identical radiation patterns and reasonable transient characteristics over the entire operating band. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2012.     

A WLAN band‐notched compact four element UWB MIMO antenna

A compact four‐element multiple‐input‐multiple‐output (MIMO) antenna for ultra‐wideband (UWB) applications with WLAN band‐notched characteristics is proposed here. The proposed antenna has been designed to operate from 2 to 12 GHz while reject the frequencies between 4.9 to 6.4 GHz. The four antenna elements are placed orthogonal to attain the polarization diversity and high isolation. A thin stub connected to the ground plane is deployed as a LC notch filter to accomplish the rejected WLAN band in each antenna element. The mutual coupling between the adjacent elements is at least 17 dB while it has low indoor and outdoor envelop correlation (<0.45) and high gain with compact size of two boards, each measuring 50 × 25 mm². To validate the concept, the prototype antenna is manufactured and measured. The comparison of the simulation results showed good agreement with the measured results. The low‐profile design and compact size of the proposed MIMO antenna make it a good candidate for diversity applications desired in portable devices operating in the UWB region.     

A compact UWB bandpass filter with a notched band using a multistubs loaded resonator

A novel multistubs loaded resonator (MSLR) is proposed in this article, which is constructed by several open‐ and short‐circuited stubs. The analysis shows that it is characterized by four resonant modes. Then, the MSLR is applied in the design of a compact ultra‐wideband (UWB) bandpass filter. The measured results show that its 3dB bandwidth can cover [3.0, 11.5] GHz, that is, 3 dB fractional bandwidth is 117%, and the return loss within the passband is greater than 15 dB. Especially, the roll‐off rate is higher than 33 dB/GHz and more than 40 dB harmonic suppression can be achieved up to 17 GHz. In order to suppress the interference of some undesired narrowband signal such as wireless local‐area network (WLAN) radio signal, a notched band is created for the UWB bandpass filter, which is realized by forming one stepped slot on each of the feedlines, respectively. The measured results show that a notched band with 2.01% fractional bandwidth at the center frequency of 5.85 GHz can be achieved and its suppression is about ?19 dB.     

A novel compact self‐similar fractal UWB MIMO antenna

A novel compact self‐similar fractal ultra‐wideband (UWB) multiple‐input‐multiple‐output (MIMO) antenna is presented. This fractal geometry is designed by using iterated function system (IFS). Self‐similar fractal geometry is used here to achieve miniaturization and wideband performance. The self‐similarity dimension of proposed fractal geometry is 1.79, which is a fractional dimension. The antenna consists of two novel self‐similar fractal monopole‐antenna elements and their metallic area is minimized by 29.68% at second iteration. A ground stub of T‐shape with vertical slot enhances isolation and impedance bandwidth of proposed MIMO antenna. This antenna has a compact dimension of 24 × 32 mm² and impedance bandwidth (S₁₁ < ?10 dB) of 9.4 GHz ranging from 3.1 to 12.5 GHz with an isolation better than 16 dB. The various diversity performance parameters are also determined. There is good agreement between measured and simulated results, which confirms that the proposed antenna is acceptable for UWB applications.     

A novel compact planar ultra‐wideband antenna with dual band‐notched characteristics

A novel planar ultrawideband monopole antenna with dual notched bands is presented. The antenna mainly consists of a radiation patch and a modified ground plane. To realize dual band‐notched characteristics, a U‐shaped stub embedded in the rectangular slot of the radiation patch and a novel coupled open‐/shorted‐circuit stub resonator are used on the backside of the substrate. The bandwidth of the dual notched bands can be controllable by adjusting some key parameters. The simulated and measured results indicate that the proposed antenna offers a very wide bandwidth from 2.6 to 18 GHz with Voltage Standing Wave Ratio (VSWR) < 2, except the dual notched bands of 3.3–3.7 GHz (World Interoperability for Microwave Access [WiMAX]) and 5.15–5.825 GHz (Wireless Local Area Network [WLAN]). Furthermore, good group delay and stable gains can be achieved over the operating frequencies. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 25:48–55, 2015.     

A compact printed ultra‐wideband multiple‐input multiple‐output prototype with band‐notch ability for WiMAX,LTEband43, and WLAN systems

A compact ultra‐wideband multiple‐input multiple‐output (UWB‐MIMO) antenna with good isolation and multiple band‐notch abilities is developed in this work. It consists of two quadrant shaped monopole antennas backed by ground stubs. A good isolation is achieved due to the two proposed extended curved ground stubs. The frequency rejection for the WLAN system is realized by loading a capacitive loaded loop resonator adjacent to the feed line. The band rejection for the WiMAX and LTE band43 system is achieved by embedding a quadrant shaped CSRR on each radiator's surface. The measured bandwidth of the antenna is 3.06 GHz‐11 GHz (|S₁₁| < ?10 dB and |S₂₁| < ?18 dB) with a band rejection from 3.5 GHz‐4 GHz to 5.1 GHz‐5.85 GHz, respectively. Time domain performances are investigated in terms of group and phase delay characteristics. Diversity characteristics are evaluated in terms of the envelope correlation coefficient, mean effective gain, and channel capacity loss.     

Reconfigurable ultra‐wideband monopole antenna with single‐, dual‐, and triple‐band notched functions

A miniaturized ultra‐wideband (UWB) monopole antenna with reconfigurable multiple‐band notched performance is demonstrated. By modifying the shape of the patch and the ground plane, the UWB operation is achieved. The first and second band‐notches are respectively generated by etching a rectangular slot with open ends and a U‐shaped slot in the patch, and the third band‐notch is produced by loading a C‐shaped parasitic element beneath the patch. To realize the reconfigurable band‐notched functions, four PIN diodes are inserted in three band‐rejected structures. The antenna has a compact dimension of 30 mm × 26 mm. It can switch between a UWB state and several band‐notch states by alternating the states of the diodes. Also, good radiation patterns are obtained.     

Design of ultrawide band planar inverted‐F antenna with slotted broad feed

This article presents a low ‐ profile planar inverted‐F antenna (PIFA) for broadband applications. The proposed antenna geometry is simple and does not use any parasitic elements, which makes its fabrication easier. The antenna's radiator is composed of a top loading plate, broad feed plate, and a shorting plate; occupies a total volume of (L × W × H ) 20 × 12 × 6 mm³. The proposed antenna design achieved the wideband characteristics by using the method of bringing resonances to proximity; furthermore, the low ‐ profile feature is achieved by removing some portion of the ground plane according to the volume ratio of PIFA. To validate the simulated results, an antenna prototype has been fabricated. The simulated and measured radiation patterns, gain, group delay, and simulated peak ‐ specific absorption rate (SAR) are presented. The measurement result demonstrates that the proposed antenna design achieved the maximum bandwidth of 142% (3.1–18.5 GHz) for |S ₁₁| ≤ ?10 dB.     

Compact ultra‐wideband slot antenna with three notched‐band characteristics

A very compact ultra‐wideband (UWB) slot antenna with three L‐shaped slots for notched‐band characteristics is presented in this article. The antenna is designed and fabricated using a new stepped slot with different size, integrated in the ground plane, and excited by a 50 Ω microstrip transmission line. The stepped slot is used to minimize the dimensions of the antenna and to achieve an impedance bandwidth between 2.65 and 11.05 GHz with voltage standing wave ratio (VSWR) less than 2. The length of the stepped slot is equal to a quarter wavelength to create a resonance in the desired frequency. Three L‐shaped slots with various sizes are etched in the ground plane to reject three frequency bands in C‐band (3.7‐4.2 GHz), WLAN (5.15‐5.825 GHz), and X‐band (7.25‐7.75 GHz), respectively. The notched‐band frequency can be controlled by changing the length of the L‐shaped slot. The proposed antenna has a very small size (20.25 × 8 × 1.27 mm³) compared with previous works. The measured and simulated results show a good agreement in terms of radiation pattern and impedance matching.     

Electromagnetic band‐gap structured printed antennas: A feature‐oriented survey

Wireless communication systems are playing an important role in different sectors of human society. Printed antennas are considered as the critical enabling technologies for these systems. The technology related to the design and development of printed antennas have been continuously improved from the structural view of configuration to antenna features improvement. Electromagnetic bandgap (EBG) structures have played a significant role in improving the features of printed antennas. In this paper, authors have restricted a feature–oriented comprehensive survey on EBG‐structured printed antennas. This type of survey is primarily required for the beginner working on EBG structures/EBG‐structured printed antennas. Such a survey process is rarely carried out in the open literature to the best of authors' knowledge. The proposed survey process is confined only to five different feature classifications; bandwidth improvement, gain improvement, dual‐band/multi‐band characteristics, band‐notch characteristics, and compact and low profile, respectively.     

Compact quad‐band band‐pass filters using stepped‐impedance coupled‐line resonators

In this article, compact quad‐band band‐pass filters are realized by using stepped‐impedance coupled‐line quad‐mode resonators (SICLQMRs). The compactness of the quad‐mode resonator relies in its folded structure without extra space between the parallel lines. Unlike stepped‐impedance resonators, SICLQMRs provide more design freedoms for controlling the four resonating frequencies since the even‐ and odd‐mode equivalents can be separately assigned with characteristic impedances. Internal and external couplings are also parallel couplings, resulting in very compact dimensions of the filters. Simulated and measured S parameters are compared with good agreement, demonstrating the feasibility of the design.     

Design of a miniaturized planar half elliptical ultra‐wideband dipole using a concaved arm

This article presents the miniaturization of a planar half elliptical ultra‐wideband dipole. By simply placing a concaved arm in close proximity to the original structure, a 45% area reduction in terms of electrical wavelength can be achieved. The proposed antenna exhibits a wide measured return loss bandwidth of 2 to 9.9 GHz and omnidirectional radiation patterns across the band. The design features a footprint size of 41.5 × 41.5 mm² and an electrical size of 0.28λ × 0.28λ at 2 GHz. Compared with some previously reported planar designs, the proposed antenna presents a more compact electrical dimension and better or comparable bandwidth. Critical geometric parameters of the structure, particularly the concaved arm, are investigated to understand the miniaturization and operating mechanism of the design. Satisfactory correlation between the simulation and measurement data is obtained.     

A planar ultra‐wide band asymmetric rat‐race hybrid coupler

In this article, an asymmetric ultra‐wideband rat‐race hybrid coupler with 180° phase shift is proposed. The primary goal of this work is to design a planar ultra‐wideband hybrid coupler with a microstrip structure by avoiding via holes and multi‐layer design. The bandwidth of an asymmetric ring hybrid is enhanced using shorted coupled lines, perturbation impedance techniques, and matching stubs. This hybrid coupler was designed and fabricated using Taconic TLX‐8 substrate with a thickness of 0.5 mm. The results of the simulation and measurement are promising and meet the desired specifications. This hybrid coupler yields a fractional bandwidth of 56% at the center frequency of 5.95 GHz based on ±1 amplitude imbalance between two output ports.     

An UWB trapezoidal rings fractal monopole antenna with dual‐notch characteristics

An ultra‐wideband planar fractal monopole antenna with dual‐notch characteristics is presented in this article. The microstrip fed antenna consists of nested trapezoidal rings and defected ground plane. Measured results show that the proposed antenna operates with a 10 dB return loss bandwidth from 2.2 to 10.8 GHz with notch bands at (2500‐2690) MHz and (3300‐4200) MHz covering LTE 2500, WiMAX and part of C‐band.     

Compact ultra‐wideband bandpass filter with configurable stopband based on diamond‐shape resonator

An ultra‐wideband compact bandpass filter (BPF) with configurable stopband by tuning transmission zeroes is proposed in this paper. The ultra‐wideband bandpass response is based on a diamond‐shape resonator consisting of a pair of broadside coupled diamond‐shape microstrip lines, within which a diamond shape defected ground structure (DGS) is etched in the middle. Flexible transmission zeros realized by open and short stubs can be easily adjusted to improve band selectivity and harmonic suppression. Measurement result shows that the dedicated device has a 3 dB fractional bandwidth of 148% (0.94‐6.36 GHz) with 20 dB rejection stopband from 6.87 to 9.7 GHz (77.5%) which agrees good with the simulate performance. The overall size of the proposed BPF is 0.27 λ_g × 0.23 λ_g.     

Design of a low‐profile broadband antenna with E‐shaped patch cells

This article presents a low‐profile broadband antenna. The E‐shaped metal cells are utilized on the top layer, which is excited by the microstrip line through the coupling slot in the ground plane. The characteristics of the E‐shaped patch cell and antenna are extensively investigated and presented. Dual resonances with close proximity are obtained to realize wideband impedance matching. An attractive feature is found that the bandwidth of the antenna exhibits good correlation with the inductance. The interesting analysis is presented by directly loading inductors to the antenna, and the bandwidth shrinks quickly with larger inductance loaded. Therefore, the antenna proposed in this article has good potential in bandwidth tuning applications. A typical bandwidth from 5.1 to 6.7 GHz is achieved by the fabricated antenna with a maximum measured gain of 10.4 dBi. Meanwhile, the antenna remains a low profile of 0.09 λ _g.