Poly(glycidyl methacrylate‐co‐3‐thienyl‐methylmethacrylate) based working electrodes for hydrogen peroxide biosensing

BACKGROUND: Hydrogen peroxide biosensors based on Poly(glycidyl methacrylate‐co‐3‐thienylmethylmethacrylate)/ Polypyrrole [Poly(GMA‐co‐MTM)/PPy] composite film were reported. Poly(GMA‐co‐MTM) including various amounts of GMA and MTM monomers was synthesized via the radical polymerization. Enzyme horseradish peroxidase (HRP) was trapped in Poly(GMA‐co‐MTM)/PPy composites during the electropolymerization reaction between pyrrole and thiophene groups of MTM monomer, and chemically bonded via the epoxy groups of GMA. Analytical parameters of the fabricated electrodes were calculated and are discussed in terms of film electroactivity and mass transfer conditions of the composite films. RESULTS: The amount of electroactive HRP was found to be 1.25, 0.34 and 0.213 µg for the working electrodes of Poly(GMA_30%‐ co‐MTM_70%)/PPy/HRP, Poly(GMA_85%‐co‐MTM_15%)/PPy/HRP and Poly(GMA_90%‐co‐MTM_10%)/PPy/HRP, respectively. Optimal response of the fabricated electrodes was obtained at pH 7 and an operational potential of ? 0.35 V. It was observed that effective enzyme immobilization and electroactivity of the composite films could be changed by changing the ratios of GMA and MTM fractions of Poly(GMA‐co‐MTM) based working electrodes. CONCLUSION: The amount of electroactive enzyme increases with increasing MTM content of the final copolymer. High operational stabilities of the biosensors can be attributed to the strong covalent enzyme linkage via the epoxy groups of GMA due to preventing enzyme deterioration and loss. A more convenient microenvironment for mass transfer was provided for the electrodes by higher GMA ratios. It is observed that mass transfer is dominated by the mechanism of electron transfer to obtain effective sensitivity values. This work contributes to discussions clarifying the problems regarding the design parameters of biosensors. Copyright © 2011 Society of Chemical Industry     

Vinylferrocene copolymers based biosensors for phenol derivatives

BACKGROUND: Newly synthesized composite films of P(glycidyl methacrylate₈₅‐co‐vinylferrocene₁₅)/Poly(glutaraldehyde)/ Polypyrrole [P(GMA₈₅‐co‐VFc₁₅)/PGA/PPy] and Poly(3‐methylthienyl methacrylate₈₅‐co‐vinylferrocene₁₅)/Polypyrrole [P (MTM₈₅‐co‐VFc₁₅)/PPy] were used as matrices for tyrosinase based working electrodes. Direct covalent attachment of enzyme was carried out via the pendant epoxy groups of P(GMA₈₅‐co‐VFc₁₅) film, and the entrapment of enzyme was achieved for electrode containing P(MTM₈₅‐co‐VFc₁₅) film via electropolymerization of pyrrole in the presence of enzyme. The aim of the study is amperometric determination of various phenolics and investigation of the effect of interfacial interactions between enzyme and matrices on biosensor response. RESULTS: The lowest detection limit and the highest sensitivity for a P(GMA₈₅‐co‐VFc₁₅) based working electrode was found to be 0.113 µmol L^?1 for 4‐methoxyphenol, 40 nA (µmol L^?1)^?1 for pyrocatechol, respectively. Results showed that sensitivities were at least 8500–55000 times higher than the results in previous P(GMA‐co‐VFc) related studies. CONCLUSION: Facilitated electron transfer was achieved by means of mediator incorporated in conductive composites of VFc based redox copolymers. The effect was greater when enzyme was covalently bonded via epoxy groups due to the proximity of enzyme, mediator and electrode surface. Results showed that a multifunctional surface was provided on electrodes since the suggested copolymers could mediate an electrochemical reaction, and the multifunctional surface was capable of coating with conductive PPy. Copyright © 2011 Society of Chemical Industry     

Porous properties of poly(glycidyl methacrylate‐co‐trimethylolpropane trimethacrylate) resins synthesized by suspension polymerization

Porous copolymer beads of 2,3‐epoxypropyl methacrylate (glycidyl methacrylate, GMA) crosslinked with 2‐ethyl‐2‐(hydroxymethyl)‐propan‐1,3‐diol trimethacrylate (trimethylolpropane trimethacrylate, TRIM) were prepared with toluene and octan‐2‐one as porogens by suspension polymerization. With an increase in the ratio of porogen to monomer, the total pore volume of poly(GMA‐co‐TRIM) increases significantly, whereas the surface area hardly changes. The total pore volume also depends on the nature of the porogen, exhibiting a maximum at the larger GMA contents in the monomer mixture of 50% v/v with octan‐2‐one and of 60% v/v with toluene, compared to that at the GMA content of 25% v/v with a 9/1 v/v mixture of cyclohexanol and dodecan‐1‐ol [Verweij, P. D.; Sherrington, D. C. J Mater Chem 1991, 1 (3), 371]. The surface area decreases significantly with an increase in the ratio of GMA to TRIM, almost regardless of the nature of the porogen. The porous properties of poly(GMA‐co‐TRIM) was well explained on the basis of phase separation, particularly taking into account not only the solubility parameters of the resulting polymer network and porogen but also the rigidity of TRIM. The porous poly(GMA‐co‐TRIM) may be a promising polymer matrix of novel materials for separation of boron isotopes. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2374–2381, 2002     

Synthesis and characterization of binary copolymers of methyl methacrylate with glycidyl methacrylate and 2‐hydroxy ethyl methacrylate as carriers for cellulase

Cellulase was immobilized directly on methyl methacrylate‐glycidyl methacrylate copolymer (MMA‐co‐GMA) and methyl methacrylate‐2‐hydroxy ethyl methacrylate copolymer (MMA‐co‐HEMA) by covalent attachment and crosslinking methods. The properties of the immobilized cellulase were investigated and compared with those of the free one. For the assays carried out through crosslinking method at 25°C and pH 7, the retained activities were found to be 91.92% and 74.63%, respectively, for MMA‐co‐GMA and MMA‐co‐HEMA crosslinked with 0.1% of 1‐cyclohexyl‐3‐(2‐morpholino‐ethyl) carbodiimide metho‐p‐toluenesulfonate (CMCT), respectively. The immobilized cellulase had better stability and higher retained activities with respect to pH, temperature, and storage stability than the free one. In the repeated use experiments, the immobilized cellulase using (MMA‐co‐GMA)‐CMCT (0.1%) and (MMA‐co‐HEMA)‐CMCT (0.1%) did not change after 10 and eight times of repeated use and maintained 67% and 62% from their original activities after 25 times, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Human serum albumin adsorption on poly[(glycidyl methacrylate)‐co‐(methyl methacrylate)] beads modified with a spacer‐arm‐attached L‐histidine ligand

Poly(GMA/MMA) beads were synthesized from glycidyl methacrylate (GMA) and methyl methacrylate (MMA) in the presence of a cross‐linker (i.e. ethyleneglycol dimethacrylate) (EGDMA) via suspension polymerization. The epoxy groups of the poly(GMA/MMA) beads were converted into amino groups with either ammonia or 1,6‐diaminohexane (i.e. spacer‐arm). An L ‐histidine ligand was then covalently immobilized on the aminated (poly(GMA/MMA)‐AH) and/or the spacer‐arm attached (poly(GMA/MMA)‐SAH) beads using glutaric dialdehyde as a coupling agent. Both affinity adsorbents were used in human serum albumin (HSA) adsorption/desorption studies under defined pH, ionic strength or temperature conditions in a batch reactor. The spacer‐arm attached affinity adsorbent resulted in an increase in the adsorption capacity to HSA when compared to the aminated counterpart (i.e. poly(GMA/MMA)‐AH). The maximum adsorption capacities of the affinity adsorbents were found to be significantly high, i.e. 43.7 and 80.2 mg g^?1 (of the beads), while the affinity constants, evaluated by the Langmuir model, were 3.96 × 10^?7 and 9.53 × 10^?7 mol L^?1 for poly(GMA/MMA)‐AH and poly(GMA/MMA)‐SAH, respectively. The adsorption capacities of the affinity adsorbents were decreased for HSA by increasing the ionic strength, adjusted with NaCl. The adsorption kinetics of HSA were analysed by using pseudo‐first and pseudo‐second‐order equations. The second‐order equation fitted well with the experimental data. Copyright © 2005 Society of Chemical Industry     

Synthesis of defined polyhedral oligosilsesquioxane‐containing diblock and triblock methacrylate copolymers by atom transfer radical polymerization

Defined diblock and triblock copolymers composed of methyl methacrylate‐co‐glycidyl methacrylate block and 3‐{3,5,7,9,11,13,15‐hepta(2‐methylpropyl)‐pentacyclo[9.5.1.1^3,9.1^5,15.1^7,13]‐octasiloxan‐1‐yl}propyl methacrylate block(s), i.e., P(MMA‐co‐GMA)‐b‐PiBuPOSSMA and PiBuPOSSMA‐b‐P(MMA‐co‐GMA)‐b‐PiBuPOSSMA, were synthesized by atom transfer radical polymerization (ATRP). First, monofunctional and bifunctional P(MMA‐co‐GMA) copolymers were synthesized by ATRP. Subsequently, these copolymers were successfully used as macroinitiators for ATRP of POSS‐containing methacrylate monomer. The process showed high initiation efficiency of macroinitiators and led to products with low dispersity. The synthesized block copolymers were characterized by size exclusion chromatography, ¹H‐NMR spectroscopy and their glass transition temperatures were determined by differential scanning calorimetry. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Study of multi‐monomer melt‐grafting onto polypropylene in an extruder

Free‐radical melt‐grafting of the dual‐monomer systems glycidyl methacrylate–styrene (GMA‐St) and hydroxyethyl methacrylate–styrene (HEMA‐St) onto polypropylene (PP) has been studied using a single‐screw extruder. For single monomer grafting systems, degradation of PP was unavoidable and deterioration of the mechanical properties of the grafted PP subsequently occurred because of β‐scission of PP chains during the free‐radical melt‐grafting process. However, for the dual‐monomer systems, it is shown that the addition of styrene as a comonomer can significantly enhance the GMA or HEMA grafting levels on PP and reduce the extent of β‐scission of PP backbone. It has been found that the grafting degree of dual‐monomer melt‐grafted PP, such as PP‐g‐(GMA‐co‐St) or PP‐g‐(HEMA‐co‐St), is about quadruple that of single‐monomer grafted PP for the same monomer and dicumyl peroxide concentrations. Moreover, the melt flow rate of the dual‐monomer grafted PP is smaller than that of the unmodified PP. Hence, PP not only was endowed with higher polarity, but also kept its good mechanical properties. © 2000 Society of Chemical Industry     

Adsorptive removal of technetium‐99 using macroporous poly(GMA‐co‐EGDMA) modified with diethylene triamine

The possibility of sorption of technetium‐99 in the form of pertechnetate anion (TcO₄^?) and the sorption kinetics for removing TcO₄^? from aqueous solution by chelating polymers based on glycidyl methacrylate (GMA) were investigated. Two samples of macroporous crosslinked poly(glycidyl methacrylate‐co‐ethylene glycol dimethacrylate) (PGME), with different amount of the crosslinker (ethylene glycol dimethacrylate, EGDMA), were synthesized by suspension copolymerization and functionalized with diethylene triamine (deta). We propose that nonspecific sorption of pertechnetate anion via electrostatic interactions takes place at the protonated amino groups of macroporous crosslinked copolymer. The results of batch experiments performed at pH 1–14 showed fast sorption kinetics for removing TcO₄^? by amino‐functionalized PGME‐deta in a wide range of pH, that is, from 1.0 to 9.0. Almost complete removal of TcO₄^? (91–98%) was reached within 180 min in the stated pH range (1.0–9.0), with the sorption half‐times of under 25 min. The partitioning coefficients of linear adsorption isotherms, with 180‐min equilibrium time, reach the high values of 2130 mL g^?1 and 1698 mL g^?1 for the two samples of synthesized PGME‐deta. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) reactive membrane utilised for cholesterol oxidase immobilisation

Poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) p(HEMA–GMA) membrane was prepared by UV‐initiated photopolymerisation of 2‐hydroxyethyl methacrylate (HEMA) and glycidyl methacrylate (GMA) in the presence of an initiator, azobisisobutyronitrile (AIBN). Cholesterol oxidase was immobilised directly on the membrane by forming covalent bonds between its amino groups and the epoxide groups of the membrane. An average of 53 µg of enzyme was immobilised per cm² of membrane, and the bound enzyme retained about 67% of its initial activity. Immobilisation improved the pH stability of the enzyme as well as its temperature stability. The optimum temperature was 5 °C higher than that of the free enzyme and was significantly broader. The thermal inactivation rate constants for free and immobilised preparations at 70 °C were calculated as k_{i (free)} 1.06 × 10^?1 min^?1 and k_{i (imm)} 2.68 × 10^?2 min^?1, respectively. The immobilised enzyme activity was found to be quite stable in the repeated experiments. © 2002 Society of Chemical Industry     

Gloss reduction and morphological properties of polycarbonate and poly(methyl methacrylate‐acrylonitrile‐butadiene‐styrene) blends with SAN‐co‐GMA as a reactive compatibilizer

The gloss properties of the polycarbonate (PC)/poly(methyl methacrylate‐acrylonitrile‐butadiene‐styrene) (MABS) blend with styrene‐acrylonitrile‐co‐glycidyl methacrylate (SAN‐co‐GMA) as a compatibilizing agent were investigated. For the PC/poly(MABS)/SAN‐co‐GMA (65/15/20, wt %) blend surface, the reduction of gloss level was observed most significantly when the GMA content was 0.1 wt %, compared with the blends with 0.05 wt % GMA or without GMA content. The gloss level of the PC/poly(MABS)/SAN‐co‐GMA (0.1 wt % GMA) blend surface was observed to be 35, which showed 65% lower than the PC/poly(MABS)/SAN‐co‐GMA blend without GMA content. The gloss reduction was most probably caused by the insoluble fractions of the PC/poly(MABS)/SAN‐co‐GMA blend that were formed by the reaction between the carboxylic acid group in poly(MABS) and epoxy group in SAN‐co‐GMA. The results of optical and transmission electron microscope analysis, spectroscopy study, and rheological properties supported the formation of insoluble structure of the PC/poly(MABS)/SAN‐co‐GMA blend when the GMA content was 0.1 wt %. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46450.     

Preparation of polyethylene‐octene elastomer/clay nanocomposite and microcellular foam processed in supercritical carbon dioxide

Polyethylene‐octene elastomer (POE)/organoclay nanocomposite was prepared by melt mixing of the POE with an organoclay (Cloisite 20A) in an internal mixer, using poly[ethylene‐co‐(methyl acrylate)‐co‐(glycidyl methacrylate)] copolymer (E‐MG‐GMA) as a compatibilizer. X‐ray diffraction and transmission electron microscopy analysis revealed that an intercalated nanocomposite was formed and the silicate layers of the clay were uniformly dispersed at a nanometre scale in the POE matrix. The nanocomposite exhibited greatly enhanced tensile and dynamic mechanical properties compared with the POE/clay composite without the compatibilizer. The POE/E‐MA‐GMA/clay nanocomposite was used to produce foams by a batch process in an autoclave, with supercritical carbon dioxide as a foaming agent. The nanocomposite produced a microcellular foam with average cell size as small as 3.4 µm and cell density as high as 2 × 10¹¹ cells cm^?3. Copyright © 2005 Society of Chemical Industry     

Functionalization of high‐density polyethylene in the molten state by glycidyl methacrylate grafting

:This study concerns the melt‐free radical grafting of glycidyl methacrylate (GMA) onto high‐density polyethylene (HDPE). We studied the effect of two initiators (tert‐butyl cumyl peroxide and di‐tert‐butyl peroxide) onto HDPE. Crosslinking of polymer was observed in the presence of 0.3 wt % tert‐butyl cumyl peroxide but not with 0.3 wt % di‐tert‐butyl peroxide. The grafting was carried out in a Brabender batch mixer at 190 °C. The grafting yield of GMA onto HDPE (determined by infrared spectrometry) is weak (<1 wt % for an initial concentration in monomer of 6 wt %). Moreover, it was noted that the degree of grafting did not vary with the concentration and the nature of peroxide used. To increase the grafting yield of GMA, we added to the HDPE/peroxide/GMA system an electron‐donating monomer, such as styrene. Adding this comonomer multiplied the rate of grafted GMA 3‐ or 4‐fold, resulting in a ratio [styrene]_i/[GMA]_i = 1 mol/mol with [GMA]_i = 6 wt %. So, the copolymerization is favored compared with the homopolymerization. This kind of copolymer presenting reactive functions is very attractive in the field of compatibilizing immiscible polymers. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 581–590, 2001     

Formaldehyde biodegradation and its inhibitory effect on nitrification

The simultaneous removal of formaldehyde and ammonium in aerobic cultures and the inhibitory effect of formaldehyde on ammonium oxidation were investigated. The influence of a co‐substrate, methanol, on formaldehyde biodegradation and on the nitrification process was also evaluated. Formaldehyde was completely removed at all concentrations tested (30–3890 mg dm^?3) in assays with that compound as the single carbon source and in the presence of methanol as co‐substrate. An initial formaldehyde biodegradation rate of 4.6 g CH₂O g^?1 VSS d^?1 was obtained for 2000 mg CH₂O dm^?3 as single carbon source compared with a rate of 7.3 g CH₂O g^?1 VSS d^?1 when methanol was added. Formaldehyde was inhibitory to the nitrification process at initial concentrations higher than 350 mg dm^?3. Increasing the initial formaldehyde concentration or adding a co‐substrate such as methanol resulted in a longer lag phase before ammonium oxidation and caused a decrease in the degree of nitrification. Nitrification was completely inhibited at initial formaldehyde concentrations higher than 1500 mg dm^?3. Copyright © 2004 Society of Chemical Industry     

Environmental responses of poly(N‐isopropylacrylamide‐co‐glycidyl methacrylate derivatized dextran) hydrogels

A series of intelligent hydrogels (poly(NIPA‐co‐GMA‐Dex)) were synthesized by copolymerization of N‐isopropylacrylamide (NIPA) and glycidyl methacrylate derivatized dextran (GMA‐Dex) in aqueous solution with different ratios. Their swelling behaviors at different temperatures and in different pH and ionic strengths, and their mechanical properties were studied. It has found that poly(NIPA‐co‐GMA‐Dex) hydrogels are temperature‐, pH‐, and ionic strength‐sensitive associated with the roles of the component PNIPA and GMA‐Dex, respectively. Most significantly, poly (NIPA‐co‐GMA‐Dex) hydrogels exhibit simultaneously good swelling properties and mechanical properties. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2435–2439, 2005     

Influence of the degree of grafting on the morphology and mechanical properties of blends of poly(butylene terephthalate) and glycidyl methacrylate grafted poly(ethylene‐co‐propylene) (EPR)

Poly(ethylene‐co‐propylene) (EPR) was functionalized to varying degrees with glycidyl methacrylate (GMA) by melt grafting processes. The EPR‐graft‐GMA elastomers were used to toughen poly(butylene terephthalate) (PBT). Results showed that the grafting degree strongly influenced the morphology and mechanical properties of PBT/EPR‐graft‐GMA blends. Compatibilization reactions between the carboxyl and/or hydroxyl of PBT and epoxy groups of EPR‐graft‐GMA induced smaller dispersed phase sizes and uniform dispersed phase distributions. However, higher degrees of grafting (>1.3) and dispersed phase contents (>10 wt%) led to higher viscosities and severe crosslinking reactions in PBT/EPR‐graft‐GMA blends, resulting in larger dispersed domains of PBT blends. Consistent with the change in morphology, the impact strength of the PBT blends increased with the increase in EPR‐graft‐GMA degrees of grafting for the same dispersion phase content when the degree of grafting was below 1.8. However, PBT/EPR‐graft‐GMA1.8 displayed much lower impact strength in the ductile region than a comparable PBT/EPR‐graft‐GMA1.3 blend (1.3 indicates degree of grafting). Morphology and mechanical results showed that EPR‐graft‐GMA 1.3 was more suitable in improving the toughness of PBT. SEM results showed that the shear yielding properties of the PBT matrix and cavitation of rubber particles were major toughening mechanisms. Copyright © 2006 Society of Chemical Industry     

Gas‐phase olefin polymerization over supported metallocene/MAO catalysts: influence of support on activity and polydispersity

Three catalysts obtained by supporting bis(n‐butylcyclopentadienyl)zirconium dichloride/methylaluminoxane on: (1) porous crosslinked poly(2‐hydroxyethylmethacrylate‐co‐styrene‐co‐divinylbenzene) particles (CAT1); (2) swellable crosslinked poly(styrene‐co‐divinylbenzene) particles (CAT2); and (3) by evaporating the catalyst precursors solution to dry powder, CAT3 were used in gas‐phase polymerization of ethylene, and ethylene/1‐hexene in a 2 L semi‐batch reactor at 80 °C and 1.4 MPa. The average polymerization activities of the three catalysts were 12.3–15.5, 4.2–10.1, and 14.3–62.9 ton PE (mol Zr h)^?1 respectively. CAT1 and CAT3 produced polyethylenes with a polydispersity range of 2.3–2.7, while that of CAT2 was 3.5–6.4. The supported catalysts produced polyolefin particles with bulk density of 0.36–0.43 g ml^?1, and essentially no fines. Ethylene/1‐hexene co‐polymerization (7 mol m^?3 initial 1‐hexene concentration in the reactor) increased polymerization activities and produced lower‐molar‐mass co‐polymers. At 21 mol m^?3 1‐hexene the polymerization activities decreased, but the relative amount of the low‐molar‐mass co‐polymer for CAT2 increased, leading to higher polydispersity. Copyright © 2006 Society of Chemical Industry     

Synthesis,characterization, reactivity ratios by nuclear magnetic resonance spectroscopy,and application of (2,5‐Dichlorophenyl acrylate‐co‐glycidyl methacrylate) polymers as adhesives for the leather industry

2,5‐ Dichlorophenyl acrylate (DPA)‐co‐glycidyl methacrylate (GMA) polymers having five different compositions were synthesized in 1,4‐dioxane using benzoyl peroxide as a free‐radical initiator at 70 ± 0.5°C. Using ¹H‐NMR spectroscopy, the composition of the two monomers in the copolymers was calculated by comparing the integral values of the aromatic and aliphatic proton peaks. The reactivity ratios were calculated by Fineman–Ross (r₁ = 0.31 and r₂ = 1.08), Kelen–Tudos (r₁ = 0.40 and r₂ = 1.15), and extended Kelen–Tudos (r₁ = 0.39 and r₂ = 1.16) methods. The nonlinear error‐in‐variables model was used to compare the reactivity ratios. The copolymers were characterized by ¹H and proton decoupled ¹³C‐NMR spectroscopes. Gel permeation chromatography was performed for estimating the M_w and M_n and M_w/M_n of the poly(DPA) and copolymers (DPA‐co‐GMA: 09 : 91 and 50 : 50). Thermal stability of the homo‐ and copolymers was estimated using TGA [poly(DPA) > DPA‐co‐GMA (50 : 50) > DPA‐co‐GMA (09:91)], while DSC was utilized for determining the glass transition temperature. T_g increased with increased DPA content in the copolymer. The 50 : 50 mol % copolymer was chosen for curing with diethanolamine in chloroform. The cured resins were tested for the adhesive properties on leather at different temperatures (50, 90, 100, and 110°C). The resin cured at 50 °C exhibited a maximum peel strength of 1.6 N/mm, revealing a good adhesive behavior. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1167–1174, 2006     

Synthesis of imide‐based methacrylic monomers and their copolymerization with methyl methacrylate: monomer reactivity ratios and heat resistance properties

The newly designed methacrylic monomer series 4‐phthalimidocyclohexyl methacrylate (PCMA ), 4‐hexahydrophthalimidocyclohexyl methacrylate (HPCMA) and 4‐hexahydro‐3,6‐methanophthalimidocyclohexyl methacrylate (HMPCMA) were synthesized. Their homopolymers and methyl methacrylate (MMA) based copolymer series were polymerized by free‐radical polymerization. The copolymer compositions were characterized using ¹H NMR spectra. The monomer reactivity ratios were calculated employing the Fineman?Ross (F‐T) and Kelen?Tüdös (K‐T) methods at low conversion. The values of r₁ and r₂ obtained by the F‐T and K‐T methods appear to be in close agreement (their average values are r₁ = 1.3061 and r₂ = 0.7336 for poly(PCMA‐co‐MMA), r₁ = 1.5169 and r₂ = 0.6840 for poly(HPCMA‐co‐MMA), r₁ = 1.7748 and r₂ = 0.5664 for poly(HMPCMA‐co‐MMA)) . The thermal stabilities and thermomechanical characteristics of the homopolymer and copolymer series were investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical thermal analysis. © 2018 Society of Chemical Industry     

Syntheses,characterization, and antibacterial activity of chitosan grafted hydrogels and associated mica‐containing nanocomposite hydrogels

Chitosan (CS) grafted poly[(acrylic acid)‐co‐(2‐hydroxyethyl methacrylate)] (CS‐g‐poly(AA‐co‐HEMA)) at different molar ratios of AA and HEMA, and the associated nanocomposite hydrogels of CS‐g‐poly(AA‐co‐HEMA)/mica were synthesized by radical copolymerization. The grafting positions at the amino or hydroxyl groups in the CS were identified by Fourier transform infrared spectroscopy. CS‐g‐poly(AA‐co‐HEMA) hydrogels were intercalated in the mica and the amount of hydrogel insertion did not affect the spacing of the silicate layers in mica. The higher mica loadings produced a rougher surface of the nanocomposite hydrogel. The water absorbency of the CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels decreased with increasing levels of mica loading to a lower level than those of the CS‐g‐poly(AA‐co‐HEMA) hydrogels. Both CS‐g‐poly(AA) and CS‐g‐poly(AA‐co‐HEMA)/mica nanocomposite hydrogels exhibited a higher antiproliferative activity against Staphylococcus aureus than did the neat CS hydrogel with CS‐g‐poly(AA) revealing a very pronounced minimum inhibition concentration (MIC) of 1.56 mg mL^?1. The extent of mica loading in the CS‐g‐poly(AA‐co‐HEMA) nanocomposite hydrogels did not affect the MIC (12.5 mg mL^?1). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013