Fast response liquid crystal mode

A novel fast nematic liquid crystal mode is proposed. It relies on the fast relaxation flow from bend state to the twisted state in the optically compensated bend mode. Such new liquid crystal mode is indeed an improved mode from the optically compensated bend mode as it does not require any holding voltage. The new liquid crystal mode has fast response time and high contrast. The proposed fast liquid crystal mode is a good candidate for applications, such as optical shutter, field sequential color display, and 3D display.     

Maximizing electro‐optic performances in the fringe‐field switching liquid crystal mode with negative dielectric anisotropic liquid crystal

The fringe‐field switching (FFS) mode that uses liquid crystals (LCs) with negative dielectric anisotropy is used in high‐resolution FFS liquid crystal display owing to its higher transmittance over positive LC, although its response time becomes slow and operating voltage (V_op) becomes high. In the device, reduction of the cell gap is required to achieve fast response time, which results in increase in V_op in general. In this paper, we propose the FFS mode with electrode width 1 µm and distance between the electrodes 1.5 µm. In such an electrode structure, V_op decreases with decreasing cell gap to 2 µm so that a proper V_op, high LC's light efficiency of 90%, a high color temperature, and a fast response time less than 10 ms, can be achieved, which maximizes electro‐optic performance of the FFS mode.     

Motion artifacts observed in 3‐D LCDs that use shutter glasses (SG 3D)

Abstract— Motion artifacts observed in 3‐D LCDs using shutter glasses (SG 3D) has been investigated. A ghost‐like artifact has been observed for static images due to incomplete image separation between the left and right views. The observed motion artifacts are different for the left and right views. And they occur even for images with zero binocular disparity. In this respect, the phenomena of observed artifacts in 3‐D moving images are differentfrom those of 3‐D static images. 3‐D motion artifacts were analyzed and are related to the moving speed of the images and the amount of binocular disparity.     

A submillisecond‐response liquid crystal for color sequential projection displays

We report a new LC with low viscosity and high clearing point (T_c ~102 °C) for color‐sequential projection displays. Using a 1.95‐µm mixed‐mode twisted nematic cell, the averaged gray‐to‐gray response time is less than 1 ms, which is ~3.6× faster than the current state of the art. Such a mixed‐mode twisted nematic liquid‐crystal‐on‐silicon can be used for near‐to‐eye wearable projection displays and head‐up displays in vehicles.     

Simulation and fabrication of a fast fringe‐field switching liquid crystal with enhanced surface anchoring enabled by controlled polymer topology

We demonstrate a fringe‐field switching nematic liquid crystal with electro‐optical behavior modulated by both bulk and surface polymer stabilization. The polymer is formed by ultraviolet irradiation‐induced phase separation of various amounts of a reactive monomer in the planar‐aligned nematic liquid crystal. Simulation is carried out to verify the effect of anchoring energy. Experimental evidence validates the effect of monomer concentration on transmittance–voltage and response times curves of fringe‐field switching cells. The polymer‐stabilized alignment with a higher polymer concentration escalates the interaction between the liquid crystal and the polymer structure and increases the surface anchoring energy. The polymer stabilization also improves the dynamic response times of liquid crystal. The enabling polymer‐stabilized alignment technique has excellent electro‐optical properties such as a very good dark state, high optical contrast, and fast rise and decay times that may lead to development of a wide range of applications.     

3‐D mobile display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel

Abstract— An autostereoscopic display based on dual‐directional light guides with a fast‐switching liquid‐crystal panel was designed and fabricated to provide better 3‐D perception with image qualities comparable to that of 2‐D displays. With two identical micro‐grooved light guides, each with a light‐controlled ability in one direction, two restricted viewing cones are formed to project pairs of parallax images to the viewer's respective eyes sequentially. Crosstalk of less than 10% located within ±8°–±30° and an LC response time of 7.1 msec for a 1.8‐in. LCD panel can yield acceptable 3‐D perceptions at viewing distance of 5.6–23 cm. Moreover, 2‐D/3‐D compatibility is provided in this module.     

MUTED: Multi‐user 3‐D display

Abstract— Research described in this paper encompasses the design and building of glasses‐free (autostereoscopic) displays that utilize a direct‐view liquid‐crystal display whose backlight is provided by a projector and novel steering optics. This is controlled by the output of a multi‐user head‐position tracker. As the displays employ spatial multiplexing on a liquid‐crystal‐display screen, they are inherently 2‐D/3‐D switchable with 2‐D being achieved by simply displaying the same image in the left and right channels. Two prototypes are described in this paper; one incorporating a holographic projector and the other a conventional LCOS projector. The LCOS projector version addresses the limitations of brightness, cross‐talk, banding in the images, and laser stability that occur in the holographic projector version. The future development is considered and a comparison between the prototypes and with other 3‐D displays is given.     

A high resolution multi‐view 3D display using switchable liquid crystal lens

A 4.4‐inch 2D/3D switchable full high definition (FHD) six‐view 3D display with 3D resolution greater than 170 ppi has been accomplished. In addition to adopting low temperature polysilicon technology (LTPS), which is most suitable for high resolution displays, a new RGBW pixel arrangement using four‐square sub‐pixels has been devised. In 2D, a resolution greater than 500 ppi, accompanied with high luminance, has been achieved. A new liquid crystal lens (LCL) has been exploited for 2D/3D switching. By employing a special multielectrode structure and dedicated manufacturing process, an optical focal ratio less than 20%, which is essential for low 3D cross talk for a six‐view 3D display, has been attained by adopting the LCL. In the vertical direction of the display, there is no cross talk increase when the viewing position is changed because of the new pixel structure. The strong focal strength of the LCL combined with a revised high‐density multi‐view design give rise to a wide 3D viewing angle greater than 20 degrees in the horizontal direction and minimum cross talk less than 10%.     

V‐shaped electro‐optical mode based on deformed‐helix ferroelectric liquid crystal with subwavelength pitch

Abstract— V‐shaped electro‐optical response is shown, both theoretically and experimentally, to be an inherent property of a deformed‐helix ferroelectric liquid‐crystal cell (DHFLC) under a special choice of the applied rectangular alternating‐electric‐field waveform, frequency, and cell geometry. In contrast to other known V‐shaped ferroelectric liquid‐crystal (FLC) modes, the discovered V‐shaped switching is observed in a broadband frequency range including 1 kHz, and not at a certain characteristic frequency. This type of V‐shaped switching allows for a drastic increase in the operating frequency of field‐sequential‐color (FSC) LCD cells in comparison with fast nematic liquid‐crystal (NLC) modes.     

A fast‐switching OCB‐mode LCD for high‐quality display applications

Abstract— Optically compensated bend (OCB) mode is a promising technology, due to its wide range of viewing angles without gray‐scale inversion or color shift, fast response, high contrast ratio, and wide temperature range. This paper summarizes the fundamental characteristics of OCB mode and discusses the development of field‐sequential‐color displays and 3‐D displays for future high‐quality display applications.     

2‐D/3‐D displays based on switchable lenticulars

Abstract— An attractive concept for 3‐D displays is the one based on LCDs equipped with lenticular lenses. This enables autostereoscopic multiview 3‐D displays without a loss in brightness. A general issue in multiview 3‐D displays is their relatively low spatial resolution because the pixels are divided among the different views. To overcome this problem, we have developed switchable displays, using liquid‐crystal (LC) filled switchable lenticulars. In this way, it is possible to have a high‐brightness 3‐D display capable of fully exploiting the native 2‐D resolution of the underlying LCD. The feasibility of LC‐filled switchable lenticulars was shown in several applications. For applications in which it is advantageous to be able to display 3‐D and 2‐D content simultaneously, a 42‐in. locally switchable prototype having a matrix electrode structure was developed. These displays were realized using cylindrically shaped lenticular lenses in contact with LC. An alternative for these are lenticulars based on gradient‐index (GRIN) LC lenses. Preliminary results for such switchable GRIN lenses are presented as well.     

A dual‐cell‐gap transflective liquid‐crystal display with identical response time in transmissive and reflective regions

Abstract— A dual‐cell‐gap transflective liquid‐crystal display (TR‐LCD) with identical response time in both the transmissive and reflective regions is demonstrated. In the transmissive region, strong anchoring energy is used to decrease the response time, while in the reflective region, weak anchoring energy is used to increase the response time. And overdrive voltage technology is adopted to make the response time identical in both the transmissive and reflective regions. The device structure and operating principle of the TR‐LCD was analyzed, the anchoring energy in the transmissive and reflective regions was designed, and the response time and electro‐optic characteristics of the TR‐LCD was calculated. The simulated dual‐cell‐gap TR‐LCD demonstrated good performances.     

Fast‐response liquid‐crystal displays using crossed fringe fields

Abstract— A fast‐response and wide‐view liquid‐crystal display (LCD) using the crossed fringe‐field‐switching (CFFS) mode is proposed, where the fringe‐field electrodes exist on both the top and bottom substrates. The bottom fringe field is used to turn on the LC directors and the top fringe field is used to assist in the LC decay process. The decay time is reduced by ～2× compared to that of the conventional FFS mode between the full bright and dark states, and more than a 2× improvement is obtained for other gray‐scale transitions. This CFFS mode also preserves the wide‐view characteristics as the conventional FFS mode. Its applications to LCD TVs and monitors for reducing image blur are addressed.     

Projection‐based head‐tracking 3‐D displays

Abstract— This paper describes the construction and operation of four 3‐D displays in which each display produces two images for each eye and thus fits into the category of projection‐based binocular stereoscopic displays. The four 3‐D displays described are pico‐projector‐based, liquid‐ crystal—on—silicon (LCOS) conventional projector‐based, 120‐Hz digital‐light‐processor (DLP) projector‐ based, and the HELIUM3D system. In the first three displays, images are produced on a direct‐view LCD whose conventional backlight is replaced with a projection illumination source that is controlled by a multi‐user head tracker; novel steering optics direct the projector output to regions referred to as exit pupils located at the viewers' eyes. In the HELIUM3D display, the image information is supplied by a horizontally scanned, fast, light valve whose output is controlled by a spatial light modulator (SLM) to direct images to the appropriate viewers' eyes. The current statu s and the multimodal potential of the HELIUM3D display are described.     

Multi‐view 3‐D display employing a flat‐panel display with slanted pixel arrangement

Abstract— A flat‐panel display with a slanted subpixel arrangement has been developed for a multi‐view three‐dimensional (3‐D) display. A set of 3M × N subpixels (M × N subpixels for each R, G, and B color) corresponds to one of the cylindrical lenses, which constitutes a lenticular lens, to construct each 3‐D pixel of a multi‐view display that offers M × N views. Subpixels of the same color in each 3‐D pixel have different horizontal positions, and the R, G, and B subpixels are repeated in the horizontal direction. In addition, the ray‐emitting areas of the subpixels within a 3‐D pixel are continuous in the horizontal direction for each color. One of the vertical edges of each subpixel has the same horizontal position as the opposite vertical edge of another subpixel of the same color. Cross‐talk among viewing zones is theoretically zero. This structure is suitable for providing a large number of views. A liquid‐crystal panel having this slanted subpixel arrangement was fabricated to construct a mobile 3‐D display with 16 views and a 3‐D resolution of 256 × 192. A 3‐D pixel is comprised of 12 × 4 subpixels (M = 4 and N = 4). The screen size was 2.57 in.     

3D television: Developing a multi‐modal multi‐viewer TV system of the future

Abstract— Under the European Union funded Advanced Three‐dimensional Television System Technologies (ATTEST) project, De Montfort University (DMU) is developing a 3D display system targeted specifically at domestic television applications. This system uses a modified transmissive LCD panel together with novel backlighting and optics to project multiple viewing regions, or exit pupils, into the viewing space. These exit pupils are located in space using a head tracker. The display accommodates multiple viewers simultaneously and imposes no physical constraints, such as special eyewear. Viewers may move freely over a “typical” room‐sized area. The design of the backlighting facilitates many other display regimes beyond the “standard” 3DTV mode in which each viewer sees the same image pair.     

A single‐cell‐gap transflective blue‐phase liquid crystal display based on fringe in‐plane switching electrodes

A transflective blue‐phase liquid crystal display (TRBP‐LCD) based on fringe in‐plane switching (FIS) electrodes is proposed. The proposed structure generates combined fringe and in‐plane electric fields that cause more liquid crystal (LC) molecules to reorient almost in plane above and between the pixel electrodes. The fringe field is mainly generated in the transmissive (T) region, and the horizontal electric field is mainly generated in the reflective (R) region. By optimizing the width of the pixel electrodes and the gap between two adjacent pixel electrodes, the different electric field intensity in the T and R regions contribute to balance the optical phase retardation between the T and R regions. As a result, the proposed TRBP‐LCD exhibits a low operating voltage and high optical efficiency, while it preserves a relatively simple fabrication process.     

Precise evaluation of LCD gray‐to‐gray response time based on a reference pattern synchronous measurement using high speed charge‐coupled device camera

A reference pattern method based on synchronous measurement for evaluating the response time of liquid crystal display was proposed to overcome the shortcomings of the unsmooth response curve induced by the backlight modulation. The feasibility of the method is verified by measurement using a high speed charge‐coupled device camera. The measured gray‐to‐gray response time results are compared with those obtained from standard measurement approach. The results indicate that the proposed method improves the accuracy and repeatability of the response time measurement.     

Angular dependence of the performance of stereoscopic liquid‐crystal‐display (LCD) television using shutter glasses (SG)

Abstract— 3‐D cross‐talk typically represents the ratio of image overlap between the left and right views. For stereoscopic LCDs using shutter‐glasses technology, 3‐D cross‐talk for stereoscopic LCD TV with a diagonal size of 46 in. and vertical alignment (VA) mode was measured to change from 1% to 10% when the stereoscopic display is rotated around the vertical axis. Input signals consist of the left and right images that include patterns of different amounts of binocular disparity and various gray levels. Ghost‐like artifacts are observed. Furthermore, intensities of these artifacts are observed to change as the stereoscopic display is rotated about the vertical axis. The temporal luminance of the LCD used in stereoscopic TV was found to be dependent on the viewing direction and can be considered as one cause of the phenomenon of angular dependence of performance for stereoscopic displays.     

Optical characterization of autostereoscopic 3‐D displays

Abstract— Display‐measurement methods different from conventional 2‐D display measurements are needed for verifying the optical characteristics of autostereoscopic (3‐D) displays and for comparing different 3‐D display technologies. Industry is lacking standardized measurement methods, and the reported results can not always be compared. The selected set of characteristics discussed in this paper and partly defining the quality of the 3‐D experience are crosstalk, viewing freedom, and optimum viewing distance. Also, more conventional display characteristics such as luminance are discussed, since the definitions for these characteristics in 3‐D mode usually differ from those used for the 2D displays. We have investigated how these chosen 3‐D display characteristics can be objectively measured from transmissive two‐view and multiview 3‐D displays. The scope of this article is to generally define those basic characteristics as well as the different measurement methods. Most of the 3‐D characteristics can be derived from the luminance and colors versus the viewing angle. Either a conoscopic or a goniometric measurement system can be used, as long as the angular and stray‐light properties are suitable and known. The characteristics and methods are currently discussed in the display‐quality standardization forums.