Spontaneous Self‐Assembly of Perovskite Nanocrystals into Electronically Coupled Supercrystals: Toward Filling the Green Gap

Self‐assembly of nanoscale building blocks into ordered nanoarchitectures has emerged as a simple and powerful approach for tailoring the nanoscale properties and the opportunities of using these properties for the development of novel optoelectronic nanodevices. Here, the one‐pot synthesis of CsPbBr₃ perovskite supercrystals (SCs) in a colloidal dispersion by ultrasonication is reported. The growth of the SCs occurs through the spontaneous self‐assembly of individual nanocrystals (NCs), which form in highly concentrated solutions of precursor powders. The SCs retain the high photoluminescence (PL) efficiency of their NC subunits, however also exhibit a redshifted emission wavelength compared to that of the individual nanocubes due to interparticle electronic coupling. This redshift makes the SCs pure green emitters with PL maxima at ≈530–535 nm, while the individual nanocubes emit a cyan‐green color (≈512 nm). The SCs can be used as an emissive layer in the fabrication of pure green light‐emitting devices on rigid or flexible substrates. Moreover, the PL emission color is tunable across the visible range by employing a well‐established halide ion exchange reaction on the obtained CsPbBr₃ SCs. These results highlight the promise of perovskite SCs for light emitting applications, while providing insight into their collective optical properties.     

Stability of Quantum Dots,Quantum Dot Films,and Quantum Dot Light‐Emitting Diodes for Display Applications

Quantum dots (QDs) are being highlighted in display applications for their excellent optical properties, including tunable bandgaps, narrow emission bandwidth, and high efficiency. However, issues with their stability must be overcome to achieve the next level of development. QDs are utilized in display applications for their photoluminescence (PL) and electroluminescence. The PL characteristics of QDs are applied to display or lighting applications in the form of color‐conversion QD films, and the electroluminescence of QDs is utilized in quantum dot light‐emitting diodes (QLEDs). Studies on the stability of QDs and QD devices in display applications are reviewed herein. QDs can be degraded by oxygen, water, thermal heating, and UV exposure. Various approaches have been developed to protect QDs from degradation by controlling the composition of their shells and ligands. Phosphorescent QDs have been protected by bulky ligands, physical incorporation in polymer matrices, and covalent bonding with polymer matrices. The stability of electroluminescent QLEDs can be enhanced by using inorganic charge transport layers and by improving charge balance. As understanding of the degradation mechanisms of QDs increases and more stable QDs and display devices are developed, QDs are expected to play critical roles in advanced display applications.     

Microscopic Origin of the Fast Blue‐Green Luminescence of Chemically Synthesized Non‐oxidized Silicon Quantum Dots

The microscopic origin of the bright nanosecond blue‐green photoluminescence (PL), frequently reported for synthesized organically terminated Si quantum dots (Si‐QDs), has not been fully resolved, hampering potential applications of this interesting material. Here a comprehensive study of the PL from alkyl‐terminated Si‐QDs of 2–3 nm size, prepared by wet chemical synthesis is reported. Results obtained on the ensemble and those from the single nano‐object level are compared, and they provide conclusive evidence that efficient and tunable emission arises due to radiative recombination of electron–hole pairs confined in the Si‐QDs. This understanding paves the way towards applications of chemical synthesis for the development of Si‐QDs with tunable sizes and bandgaps.     

25th Anniversary Article: Rational Design and Applications of Hydrogels in Regenerative Medicine

Hydrogels are hydrophilic polymer‐based materials with high water content and physical characteristics that resemble the native extracellular matrix. Because of their remarkable properties, hydrogel systems are used for a wide range of biomedical applications, such as three‐dimensional (3D) matrices for tissue engineering, drug‐delivery vehicles, composite biomaterials, and as injectable fillers in minimally invasive surgeries. In addition, the rational design of hydrogels with controlled physical and biological properties can be used to modulate cellular functionality and tissue morphogenesis. Here, the development of advanced hydrogels with tunable physiochemical properties is highlighted, with particular emphasis on elastomeric, light‐sensitive, composite, and shape‐memory hydrogels. Emerging technologies developed over the past decade to control hydrogel architecture are also discussed and a number of potential applications and challenges in the utilization of hydrogels in regenerative medicine are reviewed. It is anticipated that the continued development of sophisticated hydrogels will result in clinical applications that will improve patient care and quality of life.     

Nanocomposite hydrogels

Hydrogels, which consist of three-dimensional polymer networks and large amounts of water, have long been believed to be interesting but mechanically fragile materials limited to specific uses. Recently, important breakthroughs have been made as a result of the creation of nanocomposite hydrogels (NC gels), and most of the traditional limitations of hydrogels have been overcome. NC gels are prepared by in situ free-radical polymerization at high yield under mild conditions (near ambient temperature, without stirring), and various shapes and surface forms are readily obtained. Because of their unique organic (polymer)/inorganic (clay) network structure, high toughness and excellent optical properties and stimulus-sensitivity are simultaneously realized in NC gels. Furthermore, NC gels exhibit a number of interesting new characteristics. In this paper, the fundamental and recent developments related to NC gels are reviewed.     

Dynamic Coordination of Eu–Iminodiacetate to Control Fluorochromic Response of Polymer Hydrogels to Multistimuli

New fluorochromic materials that reversibly change their emission properties in response to their environment are of interest for the development of sensors and light‐emitting materials. A new design of Eu‐containing polymer hydrogels showing fast self‐healing and tunable fluorochromic properties in response to five different stimuli, including pH, temperature, metal ions, sonication, and force, is reported. The polymer hydrogels are fabricated using Eu–iminodiacetate (IDA) coordination in a hydrophilic poly(N,N‐dimethylacrylamide) matrix. Dynamic metal–ligand coordination allows reversible formation and disruption of hydrogel networks under various stimuli which makes hydrogels self‐healable and injectable. Such hydrogels show interesting switchable ON/OFF luminescence along with the sol–gel transition through the reversible formation and dissociation of Eu–IDA complexes upon various stimuli. It is demonstrated that Eu‐containing hydrogels display fast and reversible mechanochromic response as well in hydrogels having interpenetrating polymer network. Those multistimuli responsive fluorochromic hydrogels illustrate a new pathway to make smart optical materials, particularly for biological sensors where multistimuli response is required.     

Carbon Nanolights in Piezopolymers are Self‐Organizing Toward Color Tunable Luminous Hybrids for Kinetic Energy Harvesting

Herein, an all‐solid‐state sequential self‐organization and self‐assembly process is reported for the in situ construction of a color tunable luminous inorganic/polymer hybrid with high direct piezoresponse. The primary inorganic self‐organization in solid polymer and the subsequent polymer self‐assembly are achieved at high pressure with the first utilization of piezo‐copolymer (PVDF‐TrFE) as the host matrix of guest carbon quantum dots (CQDs). This process induces the spontaneous formation of a highly ordered, microscale, polygonal, and hierarchically structured CQDs/PVDF‐TrFE hybrid with multicolor photoluminescence, consisting of very thermodynamic stable polar crystalline nanowire arrays. The electrical polarization‐free CQDs/PVDF‐TrFE hybrids can efficiently harvest the environmental available kinetic mechanical energy with a new large‐scale group‐cooperation mechanism. The open‐circuit voltage and short‐circuit current outputs reach up to 29.6 V cm^?2 and 550 nA cm^?2, respectively. The CQDs/PVDF‐TrFE–based hybrid nanogenerator demonstrates drastically improved durable and reliable features during the real‐time demonstration of powering commercial light emitting diodes. No attenuation/fluctuation of the electrical signals is observed for ≈10 000 continuous working cycles. This study may offer a new design concept for progressively but spontaneously constructing novel multiple self‐adaptive complex inorganic/polymer hybrids that promise applications in the next generation of self‐powered autonomous optoelectronic devices.     

Excitation‐Dependent Photoluminescence from Single‐Carbon Dots

Carbon dots (CDs) are carbon‐based fluorescent nanoparticles that can exhibit excitation‐dependent photoluminescence (PL) “tunable” throughout the entire visible range, interesting for optoelectronic and imaging applications. The mechanism underlying this tunable emission remains largely debated, most prominently being ascribed to dot‐to‐dot variations that ultimately lead to excitation‐dependent ensemble properties. Here, single‐dot spectroscopy is used to elucidate the origin of the excitation‐dependent PL of CDs. It is demonstrated that already single CDs exhibit excitation‐dependent PL spectra, similar to those of the CD ensemble. The single dots, produced by a facile one‐step synthesis from chloroform and diethylamine, exhibit emission spectra with several characteristic peaks differing in emission peak position and spectral width and shape, indicating the presence of distinct emission sites on the CDs. Based on previous work, these emission sites are related to the sp² subregions in the carbon core, as well as the functional groups on the surface. These results confirm that it is possible to integrate and engineer different types of electronic transitions at the nanoscale on a single CD, making these CDs even more versatile than organic dyes or inorganic quantum dots and opening up new routes toward light‐emission engineering.     

Highly Dynamic Nanocomposite Hydrogels Self‐Assembled by Metal Ion‐Ligand Coordination

Hydrogels are emerging biomaterials with desirable physicochemical characteristics. Doping of metal ions such as Ca²⁺, Mg²⁺, and Fe²⁺ provides the hydrogels with unique attributes, including bioactivity, conductivity, and tunability. Traditionally, this doping is achieved by the interaction between metal ions and corresponding ligands or the direct incorporation of as‐prepared metal‐based nanoparticles (NPs). However, these approaches rely on a complex and laborious preparation and are typically restricted to few selected ion species. Herein, by mixing aqueous solutions of ligands (bisphosphonates, BPs), polymer grafted with ligands, and metal ions, a series of self‐assembled metallic‐ion nanocomposite hydrogels that are stabilized by the in situ formed ligand‐metal ion (BP‐M) NPs are prepared. Owing to the universal coordination between BPs and multivalent metal ions, the strategy is highly versatile and can be generalized for a wide array of metal ions. Such hydrogels exhibit a wide spectrum of mechanical properties and remarkable dynamic properties, such as excellent injectability, rapid stress relaxation, efficient ion diffusion, and triggered disassembly for harvesting encapsulated cells. Meanwhile, the hydrogels can be conveniently coated or patterned onto the surface of metals via electrophoresis. This work presents a universal strategy to prepare designer nanocomposite materials with highly tunable and dynamic behaviors.     

Extrinsic Green Photoluminescence from the Edges of 2D Cesium Lead Halides

Since the first report of the green emission of 2D all‐inorganic CsPb₂Br₅, its bandgap and photoluminescence (PL) origin have generated intense debate and remained controversial. After the discovery that PL centers occupy only specific morphological structures in CsPb₂Br₅, a two‐step highly sensitive and noninvasive optical technique is employed to resolve the controversy. Same‐spot Raman‐PL as a static property–structure probe reveals that CsPbBr₃ nanocrystals are contributing to the green emission of CsPb₂Br₅; pressure‐dependent Raman‐PL with a diamond anvil cell as a dynamic probe further rules out point defects such as Br vacancies as an alternative mechanism. Optical absorption under hydrostatic pressure shows that the bandgap of CsPb₂Br₅ is 0.3–0.4 eV higher than previously reported values and remains nearly constant with pressure up to 2 GPa in good agreement with full‐fledged density functional theory (DFT) calculations. Using ion exchange of Br with Cl and I, it is further proved that CsPbBr_3?x X_x (X = Cl or I) is responsible for the strong visible PL in CsPb₂Br_5?x X_x . This experimental approach is applicable to all PL‐active materials to distinguish intrinsic defects from extrinsic nanocrystals, and the findings pave the way for new design and development of highly efficient optoelectronic devices based on all‐inorganic lead halides.     

Biokompatible und bioaktive polymere Beschichtungen

Biocompatible and bioactive polymer surface for most biomedical applications of polymers biocompatible surface properties are highly needed. here we present various methods to immobilize biocompatible and also bioactive hydrogels on polymer surfaces. In one approach, macroinitiator‐based reactive layers are attached to polycondensates which are able to allow the grafting‐from of various hydrogels. on the other hand, it is possible to immobilize hydrophilic polymers on various substrates by plasma and e‐beam treatment. Stability, swelling and biocompatibility of the polymer films could be verified. by incorporating ph and thermo‐responsive groups, it is possible additionally to control the swelling behaviour by external triggers.     

Self‐Healing Zwitterionic Microgels as a Versatile Platform for Malleable Cell Constructs and Injectable Therapies

Injectable and malleable hydrogels that combine excellent biocompatibility, physiological stability, and ease of use are highly desirable for biomedical applications. Here, a simple and scalable strategy is reported to make injectable and malleable zwitterionic polycarboxybetaine hydrogels, which are superhydrophilic, nonimmunogenic, and completely devoid of nonspecific interactions. When zwitterionic microgels are reconstructed, the combination of covalent crosslinking inside each microgel and supramolecular interactions between them gives the resulting zwitterionic injectable pellet (ZIP) constructs supportive moduli and tunable viscoelasticity. ZIP constructs can be lyophilized to a sterile powder that fully recovers its strength and elasticity upon rehydration, simplifying storage and formulation. The lyophilized powder can be reconstituted with any aqueous suspension of cells or therapeutics, and rapidly and spontaneously self‐heals into a homogeneous composite construct. This versatile and highly biocompatible platform material shows great promise for many applications, including as an injectable cell culture scaffold that promotes multipotent stem cell expansion and provides oxidative stress protection.     

Stabilization of Polymer‐Hydrogel Capsules via Thiol–Disulfide Exchange

Polymer hydrogels are used in diverse biomedical applications including drug delivery and tissue engineering. Among different chemical linkages, the natural and reversible thiol–disulfide interconversion is extensively explored to stabilize hydrogels. The creation of macro‐, micro‐, and nanoscale disulfide‐stabilized hydrogels commonly relies on the use of oxidizing agents that may have a detrimental effect on encapsulated cargo. Herein an oxidization‐free approach to create disulfide‐stabilized polymer hydrogels via a thiol–disulfide exchange reaction is reported. In particular, thiolated poly(methacrylic acid) is used and the conditions of polymer crosslinking in solution and on colloidal porous and solid microparticles are established. In the latter case, removal of the core particles yields stable, hollow, disulfide‐crosslinked hydrogel capsules. Further, a procedure is developed to achieve efficient disulfide crosslinking of multilayered polymer films to obtain stable, liposome‐loaded polymer‐hydrogel capsules that contain functional enzymatic cargo within the liposomal subcompartments. This approach is envisaged to facilitate the development of biomedical applications of hydrogels, specifically those including fragile cargo.     

Muscle‐Inspired Highly Anisotropic,Strong, Ion‐Conductive Hydrogels

Biological tissues generally exhibit excellent anisotropic mechanical properties owing to their well‐developed microstructures. Inspired by the aligned structure in muscles, a highly anisotropic, strong, and conductive wood hydrogel is developed by fully utilizing the high–tensile strength of natural wood, and the flexibility and high‐water content of hydrogels. The wood hydrogel exhibits a high–tensile strength of 36 MPa along the longitudinal direction due to the strong bonding and cross‐linking between the aligned cellulose nanofibers (CNFs) in wood and the polyacrylamide (PAM) polymer. The wood hydrogel is 5 times and 500 times stronger than the bacterial cellulose hydrogels (7.2 MPa) and the unmodified PAM hydrogel (0.072 MPa), respectively, representing one of the strongest hydrogels ever reported. Due to the negatively charged aligned CNF, the wood hydrogel is also an excellent nanofluidic conduit with an ionic conductivity of up to 5 × 10^?4 S cm^–1 at low concentrations for highly selective ion transport, akin to biological muscle tissue. The work offers a promising strategy to fabricate a wide variety of strong, anisotropic, flexible, and ionically conductive wood‐based hydrogels for potential biomaterials and nanofluidic applications.     

Ultrahigh‐Water‐Content,Superelastic, and Shape‐Memory Nanofiber‐Assembled Hydrogels Exhibiting Pressure‐Responsive Conductivity

High‐water‐content hydrogels that are both mechanically robust and conductive could have wide applications in fields ranging from bioengineering and electronic devices to medicine; however, creating such materials has proven to be extremely challenging. This study presents a scalable methodology to prepare superelastic, cellular‐structured nanofibrous hydrogels (NFHs) by combining alginate and flexible SiO₂ nanofibers. This approach causes naturally abundant and sustainable alginate to assemble into 3D elastic bulk NFHs with tunable water content and desirable shapes on a large scale. The resultant NFHs exhibit the integrated properties of ultrahigh water content (99.8 wt%), complete recovery from 80% strain, zero Poisson's ratio, shape‐memory behavior, injectability, and elastic‐responsive conductivity, which can detect dynamic pressure in a wide range (>50 Pa) with robust sensitivity (0.24 kPa^?1) and durability (100 cycles). The fabrication of such fascinating materials may provide new insights into the design and development of multifunctional hydrogels for various applications.     

A Facile Method to Fabricate Anisotropic Hydrogels with Perfectly Aligned Hierarchical Fibrous Structures

Natural structural materials (such as tendons and ligaments) are comprised of multiscale hierarchical architectures, with dimensions ranging from nano‐ to macroscale, which are difficult to mimic synthetically. Here a bioinspired, facile method to fabricate anisotropic hydrogels with perfectly aligned multiscale hierarchical fibrous structures similar to those of tendons and ligaments is reported. The method includes drying a diluted physical hydrogel in air by confining its length direction. During this process, sufficiently high tensile stress is built along the length direction to align the polymer chains and multiscale fibrous structures (from nano‐ to submicro‐ to microscale) are spontaneously formed in the bulk material, which are well‐retained in the reswollen gel. The method is useful for relatively rigid polymers (such as alginate and cellulose), which are susceptible to mechanical signal. By controlling the drying with or without prestretching, the degree of alignment, size of superstructures, and the strength of supramolecular interactions can be tuned, which sensitively influence the strength and toughness of the hydrogels. The mechanical properties are comparable with those of natural ligaments. This study provides a general strategy for designing hydrogels with highly ordered hierarchical structures, which opens routes for the development of many functional biomimetic materials for biomedical applications.     

Oxalic Acid Enabled Emission Enhancement and Continuous Extraction of Chloride from Cesium Lead Chloride/Bromide Perovskite Nanocrystals

All‐inorganic cesium lead halide perovskite nanocrystals (NCs) have demonstrated excellent optical properties and an encouraging potential for optoelectronic applications; however, mixed‐halide perovskites, especially CsPb(Cl/Br)₃ NCs, still show lower photoluminescence quantum yields (PL QY) than the corresponding single‐halide materials. Herein, anhydrous oxalic acid is used to post‐treat CsPb(Cl/Br)₃ NCs in order to initially remove surface defects and halide vacancies, and thus, to improve their PL QY from 11% to 89% for the emission of 451 nm. Furthermore, due to the continuous chelating reaction with the oxalate ion, chloride anions from the mixed‐halide CsPb(Cl/Br)₃ perovskite NCs could be extracted, and green emitting CsPbBr₃ NCs with PL QY of 85% at 511 nm emission are obtained. Besides being useful to improve the emission of CsPb(Cl/Br)₃ NCs, the oxalic acid treatment strategy introduced here provides a further tool to adjust the distribution of halide anions in mixed‐halide perovskites without using any halide additives.     

Photodetachable Adhesion

Peeling from strong adhesion is hard, and sometimes painful. Herein, an approach is described to achieve both strong adhesion and easy detachment. The latter is triggered, on‐demand, through an exposure to light of a certain frequency range. The principle of photodetachable adhesion is first demonstrated using two hydrogels as adherends. Each hydrogel has a covalent polymer network, but does not have functional groups for bonding, so that the two hydrogels by themselves adhere poorly. The two hydrogels, however, adhere strongly when an aqueous solution of polymer chains is spread on the surfaces of the hydrogels and is triggered to form a stitching polymer network in situ, in topological entanglement with the pre‐existing polymer networks of the two hydrogels. The two hydrogels detach easily when the stitching polymer network is so functionalized that it undergoes a gel–sol transition in response to a UV light. For example, two pieces of alginate–polyacrylamide hydrogels achieve adhesion energies about 1400 and 10 J m^?2, respectively, before and after the UV radiation. Experiments are conducted to study the physics and chemistry of this strong and photodetachable adhesion, and to adhere and detach various materials, including hydrogels, elastomers, and inorganic solids.     

Cell-laden photocrosslinked GelMA–DexMA copolymer hydrogels with tunable mechanical properties for tissue engineering

To effectively repair or replace damaged tissues, it is necessary to design three dimensional (3D) extracellular matrix (ECM) mimicking scaffolds with tunable biomechanical properties close to the desired tissue application. In the present work, gelatin methacrylate (GelMA) and dextran glycidyl methacrylate (DexMA) with tunable mechanical and biological properties were utilized to prepared novel bicomponent polymeric hydrogels by cross-linking polymerization using photoinitiation. We controlled the degree of substitution (DS) of glycidyl methacrylate in DexMA so that they could obtain relevant mechanical properties. The results indicated that copolymer hydrogels demonstrated a lower swelling ratio and higher compressive modulus as compared to the GelMA. Moreover, all of the hydrogels exhibited a honeycomb-like architecture, the pore sizes decreased as DS increased, and NIH-3T3 fibroblasts encapsulated in these hydrogels all exhibited excellent viability. These characteristics suggest a class of photocrosslinkable, tunable mechanically copolymer hydrogels that may find potential application in tissue engineering and regenerative medicine applications.     

Design and Applications of Photoresponsive Hydrogels

Hydrogels are the most relevant biochemical scaffold due to their tunable properties, inherent biocompatibility, and similarity with tissue and cell environments. Over the past decade, hydrogels have developed from static materials to “smart” responsive materials adapting to various stimuli, such as pH, temperature, chemical, electrical, or light. Light stimulation is particularly interesting for many applications because of the capability of contact‐free remote manipulation of biomaterial properties and inherent spatial and temporal control. Moreover, light can be finely adjusted in its intrinsic properties, such as wavelength and intensity (i.e., the energy of an individual photon as well as the number of photons over time). Water is almost transparent for light in the photochemically relevant range (NIR–UV), thus hydrogels are well‐suited scaffolds for light‐responsive functionality. Hydrogels' chemical and physical variety combined with light responsiveness makes photoresponsive hydrogels ideal candidates for applications in several fields, ranging from biomaterials, medicine to soft robotics. Herein, the progress and new developments in the field of light‐responsive hydrogels are elaborated by first introducing the relevant photochemistries before discussing selected applications in detail.