Therapeutic Window of Ligand‐Free Silver Nanoparticles in Agar‐Embedded and Colloidal State: In Vitro Bactericidal Effects and Cytotoxicity

The inhibition of bacterial growth through effective non‐toxic antimicrobial substances is of great importance for the prevention and therapy of implant infections in various medical disciplines. For the evaluation of a therapeutic window of silver nanoparticles (AgNPs), their bactericidal properties were tested in agar composites and colloids on four medical relevant bacteria. Therefore, we produced AgNPs using high‐power nanosecond laser ablation in water showing a log‐normal particle diameter distribution centered at 17 nm. Bacteria were incubated with AgNP concentrations ranging from 5 to 70 µg · mL^?1 and the growth rate was recorded. Additionally, cytotoxic effects of AgNPs on human gingival fibroblasts were examined. The experiments demonstrated that laser‐synthesized AgNPs resulted in a significant bacterial growth inhibition of more than 80% at the indicated concentrations in a solid agar model (Pseudomonas aeruginosa 10 µg · mL^?1, Streptococcus salivarius 10 µg · mL^?1, Escherichia coli 20 µg · mL^?1, Staphylococcus aureus 70 µg · mL^?1). In a planktonic bacteria model, the growth of the tested bacteria was significantly delayed by the addition of AgNPs at a concentration of 35 µg · mL^?1. The cytotoxic assays showed limited adverse effects on human fibroblasts at concentrations of less than 20 µg · mL^?1. The present study illustrates the strong antibacterial effects of ligand‐free, laser‐generated AgNPs that exhibit moderate cytotoxic effects, resulting in a therapeutically applicable concentration of AgNPs for medical purposes between 10 and 20 µg · mL^?1.     

High‐Throughput,Protein‐Targeted Biomolecular Detection Using Frequency‐Domain Faraday Rotation Spectroscopy

A clinically relevant magneto‐optical technique (fd‐FRS, frequency‐domain Faraday rotation spectroscopy) for characterizing proteins using antibody‐functionalized magnetic nanoparticles (MNPs) is demonstrated. This technique distinguishes between the Faraday rotation of the solvent, iron oxide core, and functionalization layers of polyethylene glycol polymers (spacer) and model antibody–antigen complexes (anti‐BSA/BSA, bovine serum albumin). A detection sensitivity of ≈10 pg mL^?1 and broad detection range of 10 pg mL^?1 ? c_BSA ? 100 µ g mL^?1 are observed. Combining this technique with predictive analyte binding models quantifies (within an order of magnitude) the number of active binding sites on functionalized MNPs. Comparative enzyme‐linked immunosorbent assay (ELISA) studies are conducted, reproducing the manufacturer advertised BSA ELISA detection limits from 1 ng mL^?1 ? c_BSA ? 500 ng mL^?1. In addition to the increased sensitivity, broader detection range, and similar specificity, fd‐FRS can be conducted in less than ≈30 min, compared to ≈4 h with ELISA. Thus, fd‐FRS is shown to be a sensitive optical technique with potential to become an efficient diagnostic in the chemical and biomolecular sciences.     

The Binary Effect on Methicillin‐Resistant Staphylococcus aureus of Polymeric Nanovesicles Appended by Proline‐Rich Amino Acid Sequences and Inorganic Nanoparticles

Prevalent research underscores efforts to engineer highly sophisticated nanovesicles that are functionalized to combat antibiotic‐resistant bacterial infections, especially those caused by methicillin‐resistant Staphylococcus aureus (MRSA), and that aid with wound healing or immunomodulation. This is especially relevant for patients who are susceptible to Staphylococcus aureus infections postoperatively. Here, antibacterial formulations are incorporated into polymeric, biocompatible vesicles called polymersomes (PsNPs) that self‐assemble via hydrophobic interactions of admixed aqueous and organic substances. Nano‐PsNPs are synthesized using a high molecular weight amphiphilic block copolymer, and are conjugated to include antimicrobial peptides (AMPs) along the peripheral hydrophilic region and silver nanoparticles (AgNPs) inside their hydrophobic corona. In vitro testing on bacterial and human cell lines indicates that finely tuned treatment concentrations of AMP and AgNPs in PsNPs synergistically inhibits the growth of MRSA without posing significant side effects, as compared with other potent treatment strategies. A ratio of silver‐to‐AMP of about 1:5.8 corresponding to ≈11.6 µg mL^?1 of silver nanoparticles and 14.3 × 10^?6 m of the peptide, yields complete MRSA inhibition over a 23 h time frame. This bacteriostatic activity, coupled with nominal cytotoxicity toward native human dermal fibroblast cells, extends the potential for AMP/AgNP polymersome therapies to replace antibiotics in the clinical setting.     

A Novel Fullerene Hydroxamic Acid for the Liquid–Liquid Extraction,Separation, Preconcentration,and Spectrophotometric and ICP‐AES Determination of Vanadium

Abstract

A new reagent N‐phenyl‐(1,2 methanofullerene C₆₀)61‐formohydroxamic acid (PMFFA) is reported for extraction and trace determination of vanadium(V) in nutritional and biological substrates. The extraction mechanism of vanadium from 6 M HCl media is investigated. The influence of PMFFA, diverse ions, and temperature on the distribution constant of vanadium examined. The over all stability constant (log β₂ K _e ) and extraction constant (K _ex) are 20.89 ± 0.02 and 8.0 ± 0.02 × 10^?15, respectively in chloroform. The thermodynamics parameters are calculated and kinetics of vanadium transport is discussed. The system obeys Beer's law in the range of 3.2–64.0 ng mL^?1 of vanadium(V). The molar absorptivity is 7.96 × 10⁵ L mol^?1 cm^?1, at 510 nm. The PMFFA–vanadium(V) complex chloroform extract in chloroform was directly inserted into plasma for ICP‐AES measurement, which increases the sensitivity by 50 folds and obey Beer's law in the range of 50–1200 pg mL^?1 of vanadium(V). The method is applied for determination vanadium in real standard samples, sea water, and environmental samples.     

Li+‐Containing,Continuous Silica Nanofibers for High Li+ Conductivity in Composite Polymer Electrolyte

Solid‐state electrolytes have recently attracted significant attention toward safe and high‐energy lithium chemistries. In particular, polyethylene oxide (PEO)‐based composite polymer electrolytes (CPEs) have shown outstanding mechanical flexibility and manufacturing feasibility. However, their limited ionic conductivity, poor electrochemical stability, and insufficient mechanical strength are yet to be addressed. In this work, a novel CPE supported by Li⁺‐containing SiO₂ nanofibers is developed. The nanofibers are obtained via sol–gel electrospinning, during which lithium sulfate is in situ introduced into the nanofibers. The uniform doping of Li₂SO₄ in SiO₂ nanofibers increases the Li⁺ conductivity of SiO₂, generates mesopores on the surface of SiO₂ nanofibers, and improves the wettability between SiO₂ and PEO. As a result, the obtained SiO₂/Li₂SO₄/PEO CPE yields high Li⁺ conductivity (1.3 × 10^?4 S cm^?1 at 60 °C, ≈4.9 times the Li₂SO₄‐free CPE) and electrochemical stability. Furthermore, the all‐solid‐state LiFePO₄‐Li full cell demonstrates stable cycling with high capacities (over 80 mAh g^?1, 50 cycles at C/2 at 60 °C). The Li⁺‐containing mesoporous SiO₂ nanofibers show great potential as the filler for CPEs. Similar methods can be used to incorporate Li salts into other filler materials for CPEs.     

Fabry–Pérot Oscillation and Room Temperature Lasing in Perovskite Cube‐Corner Pyramid Cavities

Recently, organometal halide perovskite‐based optoelectronics, particularly lasers, have attracted intensive attentions because of its outstanding spectral coherence, low threshold, and wideband tunability. In this work, high‐quality CH₃NH₃PbBr₃ single crystals with a unique shape of cube‐corner pyramids are synthesized on mica substrates using chemical vapor deposition method. These micropyramids naturally form cube‐corner cavities, which are eminent candidates for small‐sized resonators and retroreflectors. The as‐grown perovskites show strong emission ≈530 nm in the vertical direction at room temperature. A special Fabry–Pérot (F–P) mode is employed to interpret the light confinement in the cavity. Lasing from the perovskite pyramids is observed from 80 to 200 K, with threshold ranging from ≈92 µJ cm^?2 to 2.2 mJ cm^?2, yielding a characteristic temperature of T₀ = 35 K. By coating a thin layer of Ag film, the threshold is reduced from ≈92 to 26 µJ cm^?2, which is accompanied by room temperature lasing with a threshold of ≈75 µJ cm^?2. This work advocates the prospect of shape‐engineered perovskite crystals toward developing micro‐sized optoelectronic devices and potentially investigating light–matter coupling in quantum optics.     

Highly Luminescent 2D‐Type Slab Crystals Based on a Molecular Charge‐Transfer Complex as Promising Organic Light‐Emitting Transistor Materials

A new 2:1 donor (D):acceptor (A) mixed‐stacked charge‐transfer (CT) cocrystal comprising isometrically structured dicyanodistyrylbenzene‐based D and A molecules is designed and synthesized. Uniform 2D‐type morphology is manifested by the exquisite interplay of intermolecular interactions. In addition to its appealing structural features, unique optoelectronic properties are unveiled. Exceptionally high photoluminescence quantum yield (Φ _F ≈ 60%) is realized by non‐negligible oscillator strength of the S₁ transition, and rigidified 2D‐type structure. Moreover, this luminescent 2D‐type CT crystal exhibits balanced ambipolar transport (µ _h and µ _e of ≈10^?4 cm² V^?1 s^?1). As a consequence of such unique optoelectronic characteristics, the first CT electroluminescence is demonstrated in a single active‐layered organic light‐emitting transistor (OLET) device. The external quantum efficiency of this OLET is as high as 1.5% to suggest a promising potential of luminescent mixed‐stacked CT cocrystals in OLET applications.     

MXene‐Derived Ferroelectric Crystals

This study demonstrates the first synthesis of MXene‐derived ferroelectric crystals. Specifically, high‐aspect‐ratio potassium niobate (KNbO₃) ferroelectric crystals is successfully synthesized using 2D Nb₂C, MXene, and potassium hydroxide (KOH) as the niobium and potassium source, respectively. Material analysis confirms that a KNbO₃ orthorhombic phase with Amm2 symmetry is obtained. Additionally, ferroelectricity in KNbO₃ is confirmed using standard ferroelectric, dielectric, and piezoresponse force microscopy measurements. The KNbO₃ crystals exhibit a saturated polarization of ≈21 µC cm^?2, a remnant polarization of ≈17 µC cm^?2, and a coercive field of ≈50 kV cm^?1. This discovery illustrates that the 2D nature of MXenes can be exploited to grow ferroelectric crystals.     

MoS2–HgTe Quantum Dot Hybrid Photodetectors beyond 2 µm

Mercury telluride (HgTe) colloidal quantum dots (CQDs) have been developed as promising materials for the short and mid‐wave infrared photodetection applications because of their low cost, solution processing, and size tunable absorption in the short wave and mid‐infrared spectrum. However, the low mobility and poor photogain have limited the responsivity of HgTe CQD‐based photodetectors to only tens of mA W^?1. Here, HgTe CQDs are integrated on a TiO₂ encapsulated MoS₂ transistor channel to form hybrid phototransistors with high responsivity of ≈10⁶ A W^?1, the highest reported to date for HgTe QDs. By operating the phototransistor in the depletion regime enabled by the gate modulated current of MoS₂, the noise current is significantly suppressed, leading to an experimentally measured specific detectivity D* of ≈10¹² Jones at a wavelength of 2 µm. This work demonstrates for the first time the potential of the hybrid 2D/QD detector technology in reaching out to wavelengths beyond 2 µm with compelling sensitivity.     

High‐Performance,Room Temperature,Ultra‐Broadband Photodetectors Based on Air‐Stable PdSe2

Photodetection over a broad spectral range is crucial for optoelectronic applications such as sensing, imaging, and communication. Herein, a high‐performance ultra‐broadband photodetector based on PdSe₂ with unique pentagonal atomic structure is reported. The photodetector responds from visible to mid‐infrared range (up to ≈4.05 µm), and operates stably in ambient and at room temperature. It promises improved applications compared to conventional mid‐infrared photodetectors. The highest responsivity and external quantum efficiency achieved are 708 A W^?1 and 82 700%, respectively, at the wavelength of 1064 nm. Efficient optical absorption beyond 8 µm is observed, indicating that the photodetection range can extend to longer than 4.05 µm. Owing to the low crystalline symmetry of layered PdSe₂, anisotropic properties of the photodetectors are observed. This emerging material shows potential for future infrared optoelectronics and novel devices in which anisotropic properties are desirable.     

High Amplification of the Antiviral Activity of Curcumin through Transformation into Carbon Quantum Dots

It is demonstrated that carbon quantum dots derived from curcumin (Cur‐CQDs) through one‐step dry heating are effective antiviral agents against enterovirus 71 (EV71). The surface properties of Cur‐CQDs, as well as their antiviral activity, are highly dependent on the heating temperature during synthesis. The one‐step heating of curcumin at 180 °C preserves many of the moieties of polymeric curcumin on the surfaces of the as‐synthesized Cur‐CQDs, resulting in superior antiviral characteristics. It is proposed that curcumin undergoes a series of structural changes through dehydration, polymerization, and carbonization to form core–shell CQDs whose surfaces remain a pyrolytic curcumin‐like polymer, boosting the antiviral activity. The results reveal that curcumin possesses insignificant inhibitory activity against EV71 infection in RD cells [half‐maximal effective concentration (EC₅₀) >200 µg mL^?1] but exhibits high cytotoxicity toward RD cells (half‐maximal cytotoxic concentration (CC₅₀) <13 µg mL^?1). The EC₅₀ (0.2 µg mL^?1) and CC₅₀ (452.2 µg mL^?1) of Cur‐CQDs are >1000‐fold lower and >34‐fold higher, respectively, than those of curcumin, demonstrating their far superior antiviral capabilities and high biocompatibility. In vivo, intraperitoneal administration of Cur‐CQDs significantly decreases mortality and provides protection against virus‐induced hind‐limb paralysis in new‐born mice challenged with a lethal dose of EV71.     

Inkjet‐Printed High‐Q Nanocrystalline Diamond Resonators

Diamond is a highly desirable material for state‐of‐the‐art micro‐electromechanical (MEMS) devices, radio‐frequency filters and mass sensors, due to its extreme properties and robustness. However, the fabrication/integration of diamond structures into Si‐based components remain costly and complex. In this work, a lithography‐free, low‐cost method is introduced to fabricate diamond‐based micro‐resonators: a modified home/office desktop inkjet printer is used to locally deposit nanodiamond ink as ?50–60 µm spots, which are grown into ≈1 µm thick nanocrystalline diamond film disks by chemical vapor deposition, and suspended by reactive ion etching. The frequency response of the fabricated structures is analyzed by laser interferometry, showing resonance frequencies in the range of ≈9–30 MHz, with Q ‐factors exceeding 10⁴, and (f₀ × Q) figure of merit up to ≈2.5 × 10¹¹ Hz in vacuum. Analysis in controlled atmospheres shows a clear dependence of the Q‐factors on gas pressure up until 1 atm, with Q ∝ 1/P. When applied as mass sensors, the inkjet‐printed diamond resonators yield mass responsivities up to 981 Hz fg^?1 after Au deposition, and ultrahigh mass resolution up to 278 ± 48 zg, thus outperforming many similar devices produced by traditional top‐down, lithography‐based techniques. In summary, this work demonstrates the fabrication of functional high‐performance diamond‐based micro‐sensors by direct inkjet printing.     

A 1300 mm2 Ultrahigh‐Performance Digital Imaging Assembly using High‐Quality Perovskite Single Crystals

By fine‐tuning the crystal nucleation and growth process, a low‐temperature‐gradient crystallization method is developed to fabricate high‐quality perovskite CH₃NH₃PbBr₃ single crystals with high carrier mobility of 81 ± 5 cm² V^?1 s^?1 (>3 times larger than their thin film counterpart), long carrier lifetime of 899 ± 127 ns (>5 times larger than their thin film counterpart), and ultralow trap state density of 6.2 ± 2.7 × 10⁹ cm^?3 (even four orders of magnitude lower than that of single‐crystalline silicon wafers). In fact, they are better than perovskite single crystals reported in prior work: their application in photosensors gives superior detectivity as high as 6 × 10¹³ Jones, ≈10–100 times better than commercial sensors made of silicon and InGaAs. Meanwhile, the response speed is as fast as 40 µs, ≈3 orders of magnitude faster than their thin film devices. A large‐area (≈1300 mm²) imaging assembly composed of a 729‐pixel sensor array is further designed and constructed, showing excellent imaging capability thanks to its superior quality and uniformity. This opens a new possibility to use the high‐quality perovskite single‐crystal‐based devices for more advanced imaging sensors.     

Surface Dependence of Protein Nanocrystal Formation

The self‐assembly kinetics and nanocrystal formation of the bacterial surface‐layer‐protein SbpA are studied with a combination of quartz crystal microbalance with dissipation monitoring (QCM‐D) and atomic force microscopy (AFM). Silane coupling agents, aminopropyltriethoxysilane (APTS) and octadecyltrichlorosilane (OTS), are used to vary the protein–surface interaction in order to induce new recrystallization pathways. The results show that the final S‐layer crystal lattice parameters (a = b = 14 nm, γ = 90°), the layer thickness (15 nm), and the adsorbed mass density (1700 ng cm^?2) are independent of the surface chemistry. Nevertheless, the adsorption rate is five times faster on APTS and OTS than on SiO_2, strongly affecting protein nucleation and growth. As a consequence, protein crystalline domains of 0.02 µm² for APTS and 0.05 µm² for OTS are formed, while for silicon dioxide the protein domains have a typical size of about 32 µm². In addition, more‐rigid crystalline protein layers are formed on hydrophobic substrates. In situ AFM experiments reveal three different kinetic steps: adsorption, self‐assembly, and crystalline‐domain reorganization. These steps are corroborated by frequency–dissipation curves. Finally, it is shown that protein adsorption is a diffusion‐driven process. Experiments at different protein concentrations demonstrate that protein adsorption saturates at 0.05 mg mL^?1 on silane‐coated substrates and at 0.07 mg mL^?1 on hydrophilic silicon dioxide.     

Characterisation and antifungal activity of silver nanoparticles biologically synthesised by Amaranthus retroflexus leaf extract

ABSTRACT

Following the emergence of resistant fungal pathogens, silver nanoparticles (AgNPs) biosynthesized by plants have been recognized as promising tools to combat parasitic fungi. This study evaluated the potency of Amaranthus retroflexus in producing AgNPs, followed by testing their antifungal effects. The AgNPs exhibited a maximum absorption at 430 nm through ultraviolet-visible spectroscopy, while the X-ray diffraction indicated that they were crystal in nature. Fourier transform infrared spectroscopy confirmed the conversion of Ag⁺ ions to AgNPs due to the reduction by capping material of plant extract. The transmission electron microscope analysis further revealed that the AgNPs were spherical ranging from 10 nm to 32 nm in size. The AgNPs at the concentrations of 50, 100, 200, and 400 μg/mL were applied to the growth of plant, mushroom, and human pathogenic fungi. The 50% minimum inhibitory concentrations (MIC₅₀) against Macrophomina phaseolina, Alternaria alternata and Fusarium oxysporum were observed to be 159.80 ± 14.49, 337.09 ± 19.72, and 328.05 ± 13.29 μg/mL, respectively. However, no considerable inhibition was observed regarding Trichoderma harzianum or Geotrichum candidum. These findings may suggest A. retroflexus as a green solution for biosynthesizing AgNPs with potent antifungal activities against plant pathogenic fungi.     

Transparent,Flexible, and Conductive 2D Titanium Carbide (MXene) Films with High Volumetric Capacitance

2D transition‐metal carbides and nitrides, known as MXenes, have displayed promising properties in numerous applications, such as energy storage, electromagnetic interference shielding, and catalysis. Titanium carbide MXene (Ti₃C₂T_x ), in particular, has shown significant energy‐storage capability. However, previously, only micrometer‐thick, nontransparent films were studied. Here, highly transparent and conductive Ti₃C₂T_x films and their application as transparent, solid‐state supercapacitors are reported. Transparent films are fabricated via spin‐casting of Ti₃C₂T_x nanosheet colloidal solutions, followed by vacuum annealing at 200 °C. Films with transmittance of 93% (≈4 nm) and 29% (≈88 nm) demonstrate DC conductivity of ≈5736 and ≈9880 S cm^?1, respectively. Such highly transparent, conductive Ti₃C₂T_x films display impressive volumetric capacitance (676 F cm^?3) combined with fast response. Transparent solid‐state, asymmetric supercapacitors (72% transmittance) based on Ti₃C₂T_x and single‐walled carbon nanotube (SWCNT) films are also fabricated. These electrodes exhibit high capacitance (1.6 mF cm^?2) and energy density (0.05 µW h cm^?2), and long lifetime (no capacitance decay over 20 000 cycles), exceeding that of graphene or SWCNT‐based transparent supercapacitor devices. Collectively, the Ti₃C₂T_x films are among the state‐of‐the‐art for future transparent, conductive, capacitive electrodes, and translate into technologically viable devices for next‐generation wearable, portable electronics.     

Cobalt Nanoparticles and Atomic Sites in Nitrogen‐Doped Carbon Frameworks for Highly Sensitive Sensing of Hydrogen Peroxide

In situ monitoring of hydrogen peroxide (H₂O₂) during its production process is needed. Here, an electrochemical H₂O₂ sensor with a wide linear current response range (concentration: 5 × 10^?8 to 5 × 10^?2 m ), a low detection limit (32.4 × 10^?9 m ), and a high sensitivity (568.47 µA mm ^?1 cm^?2) is developed. The electrocatalyst of the sensor consists of cobalt nanoparticles and atomic Co‐N_x moieties anchored on nitrogen doped carbon nanotube arrays (Co‐N/CNT), which is obtained through the pyrolysis of the sandwich‐like urea@ZIF‐67 complex. More cobalt nanoparticles and atomic Co‐N_x as active sites are exposed during pyrolysis, contributing to higher electrocatalytic activity. Moreover, a portable screen‐printed electrode sensor is constructed and demonstrated for rapidly detecting (cost ≈40 s) H₂O₂ produced in microbial fuel cells with only 50 µL solution. Both the synthesis strategy and sensor design can be applied to other energy and environmental fields.     

Study on the Ocular Pharmacokinetics of Ion-Activated In Situ Gelling Ophthalmic Delivery System for Gatifloxacin by Microdialysis

The poor bioavailability and therapeutic response exhibited by conventional ophthalmic solutions due to rapid precorneal elimination of the drug may be overcome by the use of gel system. The present work was conducted to evaluate the relative bioavailability of ion-activated in situ ophthalmic gel of gatifloxacin by microdialysis. The conventional ophthalmic solution of gatifloxacin was used as reference. The AUC of test group is 3.8-fold vs. the reference group (1.4316 ± 0.1327 μg·mL^?1·h vs. 0.3756 ± 0.0380 μg·mL^?1·hr) (P < 0.05), and the C_max of test group vs. the control group is 3.0-fold (0.3363 ± 0.0634 μg·mL^?1 vs. 0.1112 ± 0.0151 μg·mL^?1) (P < 0.05). The T_max of test group is longer than that of reference group (2.0 ± 0.67 hr vs. 0.667 ± 0.17 hr) (P < 0.1), and K_e of test group is lower than that of reference group. The developed formulation has a higher bioavailability and longer residence time in aqueous humor than conventional ophthalmic solutions. The developed system is a viable alternative to conventional eye drops.     

GaP/GaNP Heterojunctions for Efficient Solar‐Driven Water Oxidation

The growth and characterization of an n‐GaP/i‐GaNP/p⁺‐GaP thin film heterojunction synthesized using a gas‐source molecular beam epitaxy (MBE) method, and its application for efficient solar‐driven water oxidation is reported. The TiO₂/Ni passivated n‐GaP/i‐GaNP/p⁺‐GaP thin film heterojunction provides much higher photoanodic performance in 1 m KOH solution than the TiO₂/Ni‐coated n‐GaP substrate, leading to much lower onset potential and much higher photocurrent. There is a significant photoanodic potential shift of 764 mV at a photocurrent of 0.34 mA cm^?2, leading to an onset potential of ≈0.4 V versus reversible hydrogen electrode (RHE) at 0.34 mA cm^?2 for the heterojunction. The photocurrent at the water oxidation potential (1.23 V vs RHE) is 1.46 and 7.26 mA cm^?2 for the coated n‐GaP and n‐GaP/i‐GaNP/p⁺‐GaP photoanodes, respectively. The passivated heterojunction offers a maximum applied bias photon‐to‐current efficiency (ABPE) of 1.9% while the ABPE of the coated n‐GaP sample is almost zero. Furthermore, the coated n‐GaP/i‐GaNP/p⁺‐GaP heterojunction photoanode provides a broad absorption spectrum up to ≈620 nm with incident photon‐to‐current efficiencies (IPCEs) of over 40% from ≈400 to ≈560 nm. The high low‐bias performance and broad absorption of the wide‐bandgap GaP/GaNP heterojunctions render them as a promising photoanode material for tandem photoelectrochemical (PEC) cells to carry out overall solar water splitting.