Focus on Spinel Li4Ti5O12 as Insertion Type Anode for High‐Performance Na‐Ion Batteries

Sodium‐ion batteries (SIBs) toward large‐scale energy storage applications has fascinated researchers in recent years owing to the low cost, environmental friendliness, and inestimable abundance. The similar chemical and electrochemical properties of sodium and lithium make sodium an easy substitute for lithium in lithium‐ion batteries. However, the main issues of limited cycle life, low energy density, and poor power density hamper the commercialization process. In the last few years, the development of electrode materials for SIBs has been dedicated to improving sodium storage capacities, high energy density, and long cycle life. The insertion type spinel Li₄Ti₅O₁₂ (LTO) possesses “zero‐strain” behavior that offers the best cycle life performance among all reported oxide‐based anodes, displaying a capacity of 155 mAh g^?1 via a three‐phase separation mechanism, and competing for future topmost high energy anode for SIBs. Recent reports offer improvement of overall electrode performance through carbon coating, doping, composites with metal oxides, and surface modification techniques, etc. Further, LTO anode with its structure and properties for SIBs is described and effective methods to improve the LTO performance are discussed in both half‐cell and practical configuration, i.e., full‐cell, along with future perspectives and solutions to promote its use.     

High‐Performance Flexible Freestanding Anode with Hierarchical 3D Carbon‐Networks/Fe7S8/Graphene for Applicable Sodium‐Ion Batteries

Sodium‐ion batteries (SIBs) have gained tremendous interest for grid scale energy storage system and power energy batteries. However, the current researches of anode for SIBs still face the critical issues of low areal capacity, limited cycle life, and low initial coulombic efficiency for practical application perspective. To solve this issue, a kind of hierarchical 3D carbon‐networks/Fe₇S₈/graphene (CFG) is designed and synthesized as freestanding anode, which is constructed with Fe₇S₈ microparticles well‐welded on 3D‐crosslinked carbon‐networks and embedded in highly conductive graphene film, via a facile and scalable synthetic method. The as‐prepared freestanding electrode CFG represents high areal capacity (2.12 mAh cm^?2 at 0.25 mA cm^?2) and excellent cycle stability of 5000 cycles (0.0095% capacity decay per cycle). The assembled all‐flexible sodium‐ion battery delivers remarkable performance (high areal capacity of 1.42 mAh cm^?2 at 0.3 mA cm^?2 and superior energy density of 144 Wh kg^?1), which are very close to the requirement of practical application. This work not only enlightens the material design and electrode engineering, but also provides a new kind of freestanding high energy density anode with great potential application prospective for SIBs.     

S‐Doped Carbon Fibers Uniformly Embedded with Ultrasmall TiO2 for Na+/Li+ Storage with High Capacity and Long‐Time Stability

Building a rechargeable battery with high capacity, high energy density, and long lifetime contributes to the development of novel energy storage devices in the future. Although carbon materials are very attractive anode materials for lithium‐ion batteries (LIBs), they present several deficiencies when used in sodium‐ion batteries (SIBs). The choice of an appropriate structural design and heteroatom doping are critical steps to improve the capacity and stability. Here, carbon‐based nanofibers are produced by sulfur doping and via the introduction of ultrasmall TiO₂ nanoparticles into the carbon fibers (CNF‐S@TiO₂). It is discovered that the introduction of TiO₂ into carbon nanofibers can significantly improve the specific surface area and microporous volume for carbon materials. The TiO₂ content is controlled to obtain CNF‐S@TiO₂‐5 to use as the anode material for SIBs/LIBs with enhanced electrochemical performance in Na⁺/Li⁺ storage. During the charge/discharge process, the S‐doping and the incorporation of TiO₂ nanoparticles into carbon fibers promote the insertion/extraction of the ions and enhance the capacity and cycle life. The capacity of CNF‐S@TiO₂‐5 can be maintained at ≈300 mAh g^?1 over 600 cycles at 2 A g^?1 in SIBs. Moreover, the capacity retention of such devices is 94%, showing high capacity and good stability.     

Nonaqueous Sodium‐Ion Full Cells: Status,Strategies, and Prospects

With ever‐increasing efforts focused on basic research of sodium‐ion batteries (SIBs) and growing energy demand, sodium‐ion full cells (SIFCs), as unique bridging technology between sodium‐ion half‐cells (SIHCs) and commercial batteries, have attracted more and more interest and attention. To promote the development of SIFCs in a better way, it is essential to gain a systematic and profound insight into their key issues and research status. This Review mainly focuses on the interface issues, major challenges, and recent progresses in SIFCs based on diversified electrolytes (i.e., nonaqueous liquid electrolytes, quasi‐solid‐state electrolytes, and all‐solid‐state electrolytes) and summarizes the modification strategies to improve their electrochemical performance, including interface modification, cathode/anode matching, capacity ratio, electrolyte optimization, and sodium compensation. Outlooks and perspectives on the future research directions to build better SIFCs are also provided.     

Recent Progress in Rechargeable Sodium‐Ion Batteries: toward High‐Power Applications

The increasing demands for renewable energy to substitute traditional fossil fuels and related large‐scale energy storage systems (EES) drive developments in battery technology and applications today. The lithium‐ion battery (LIB), the trendsetter of rechargeable batteries, has dominated the market for portable electronics and electric vehicles and is seeking a participant opportunity in the grid‐scale battery market. However, there has been a growing concern regarding the cost and resource availability of lithium. The sodium‐ion battery (SIB) is regarded as an ideal battery choice for grid‐scale EES owing to its similar electrochemistry to the LIB and the crust abundance of Na resources. Because of the participation in frequency regulation, high pulse‐power capability is essential for the implanted SIBs in EES. Herein, a comprehensive overview of the recent advances in the exploration of high‐power cathode and anode materials for SIB is presented, and deep understanding of the inherent host structure, sodium storage mechanism, Na⁺ diffusion kinetics, together with promising strategies to promote the rate performance is provided. This work may shed light on the classification and screening of alternative high rate electrode materials and provide guidance for the design and application of high power SIBs in the future.     

A Universal Strategy for Intimately Coupled Carbon Nanosheets/MoM Nanocrystals (M = P,S, C,and O) Hierarchical Hollow Nanospheres for Hydrogen Evolution Catalysis and Sodium‐Ion Storage

Intimately coupled carbon/transition‐metal‐based hierarchical nanostructures are one of most interesting electrode materials for boosting energy conversion and storage applications owing to the strong synergistic effect between the two components and appealing structural stability. Herein, a universal method is reported for making hierarchical hollow carbon nanospheres (HCSs) with intimately coupled ultrathin carbon nanosheets and Mo‐based nanocrystals. The in situ and confined reaction of the synthetic strategy can not only allow the aggregation of the nanocrystals to be impeded, but also endows extremely intimate coupled interaction between the conductive carbon nanosheets and the nanocrystals MoM (M = P, S, C and O). As a proof of concept, the as‐prepared MoP/C HCSs exhibit extraordinary hydrogen evolution reaction electrocatalytic activity with small overpotential and robust durability in both acidic and alkaline solutions. In addition, the unique sheet‐on‐sheet MoS₂/C HCSs as an anode demonstrate high capacity, great rate capabilities, and long‐term cycles for sodium‐ion batteries (SIBs). The capacity can be maintained at 410 mA h g^?1 even after 1000 cycles even at a high current density of 4 A g^?1, one of the best reported values for MoS₂‐based electrode materials for SIBs. The present work highlights the importance of designing and fabricating functional strongly coupled hybrid materials for enhancing energy conversion and storage applications.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Hierarchically Porous Fe2CoSe4 Binary‐Metal Selenide for Extraordinary Rate Performance and Durable Anode of Sodium‐Ion Batteries

Owing to high energy capacities, transition metal chalcogenides have drawn significant research attention as the promising electrode materials for sodium‐ion batteries (SIBs). However, limited cycle life and inferior rate capabilities still hinder their practical application. Improvement of the intrinsic conductivity by smart choice of elemental combination along with carbon coupling of the nanostructures may result in excellence of rate capability and prolonged cycling stability. Herein, a hierarchically porous binary transition metal selenide (Fe₂CoSe₄, termed as FCSe) nanomaterial with improved intrinsic conductivity was prepared through an exclusive methodology. The hierarchically porous structure, intimate nanoparticle–carbon matrix contact, and better intrinsic conductivity result in extraordinary electrochemical performance through their synergistic effect. The synthesized FCSe exhibits excellent rate capability (816.3 mA h g^?1 at 0.5 A g^?1 and 400.2 mA h g^?1 at 32 A g^?1), extended cycle life (350 mA h g^?1 even after 5000 cycles at 4 A g^?1), and adequately high energy capacity (614.5 mA h g^?1 at 1 A g^?1 after 100 cycles) as anode material for SIBs. When further combined with lab‐made Na₃V₂(PO₄)₃/C cathode in Na‐ion full cells, FCSe presents reasonably high and stable specific capacity.     

1D Nanomaterials: Design,Synthesis, and Applications in Sodium–Ion Batteries

Sodium–ion batteries (SIBs) have received extensive attention as ideal candidates for large‐scale energy storage systems (ESSs) owing to the rich resources and low cost of sodium (Na). However, the larger size of Na⁺ and the less negative redox potential of Na⁺/Na result in low energy densities, short cycling life, and the sluggish kinetics of SIBs. Therefore, it is necessary to develop appropriate Na storage electrode materials with the capability to host larger Na⁺ and fast ion diffusion kinetics. 1D materials such as nanofibers, nanotubes, nanorods, and nanowires, are generally considered to be high‐capacity and stable electrode materials, due to their uniform structure, orientated electronic and ionic transport, and strong tolerance to stress change. Here, the synthesis of 1D nanomaterials and their applications in SIBs are reviewed. In addition, the prospects of 1D nanomaterials on energy conversion and storage as well as the development and application orientation of SIBs are presented.     

High‐Energy/Power and Low‐Temperature Cathode for Sodium‐Ion Batteries: In Situ XRD Study and Superior Full‐Cell Performance

Sodium‐ion batteries (SIBs) are still confronted with several major challenges, including low energy and power densities, short‐term cycle life, and poor low‐temperature performance, which severely hinder their practical applications. Here, a high‐voltage cathode composed of Na₃V₂(PO₄)₂O₂F nano‐tetraprisms (NVPF‐NTP) is proposed to enhance the energy density of SIBs. The prepared NVPF‐NTP exhibits two high working plateaux at about 4.01 and 3.60 V versus the Na⁺/Na with a specific capacity of 127.8 mA h g^?1. The energy density of NVPF‐NTP reaches up to 486 W h kg^?1, which is higher than the majority of other cathode materials previously reported for SIBs. Moreover, due to the low strain (≈2.56% volumetric variation) and superior Na transport kinetics in Na intercalation/extraction processes, as demonstrated by in situ X‐ray diffraction, galvanostatic intermittent titration technique, and cyclic voltammetry at varied scan rates, the NVPF‐NTP shows long‐term cycle life, superior low‐temperature performance, and outstanding high‐rate capabilities. The comparison of Ragone plots further discloses that NVPF‐NTP presents the best power performance among the state‐of‐the‐art cathode materials for SIBs. More importantly, when coupled with an Sb‐based anode, the fabricated sodium‐ion full‐cells also exhibit excellent rate and cycling performances, thus providing a preview of their practical application.     

High-Efficiency Cathode Sodium Compensation for Sodium-Ion Batteries

Sodium-ion batteries have gained much attention for their potential application in large-scale stationary energy storage due to the low cost and abundant sodium sources in the earth. However, the electrochemical performance of sodium-ion full cells (SIFCs) suffers severely from the irreversible consumption of sodium ions of cathode during the solid electrolyte interphase (SEI) formation of hard carbon anode. Here, a high-efficiency cathode sodiation compensation reagent, sodium oxalate (Na₂C₂O₄), which possesses both a high theoretical capacity of 400 mA h g⁻¹ and a capacity utilization as high as 99%, is proposed. The implementation of Na₂C₂O₄ as sacrificial sodium species is successfully realized by decreasing its oxidation potential from 4.41 to 3.97 V through tuning conductive additives with different physicochemical features, and the corresponding mechanism of oxidation potential manipulation is analyzed. Electrochemical results show that in the full cell based on a hard carbon anode and a P2-Na_2/3Ni_1/3Mn_1/3Ti_1/3O₂ cathode with Na₂C₂O₄ as a sodium reservoir to compensate for sodium loss during SEI formation, the capacity retention is increased from 63% to 85% after 200 cycles and the energy density is improved from 129.2 to 172.6 W h kg⁻¹. This work can provide a new avenue for accelerating the development of SIFCs.     

Designed Formation of Hybrid Nanobox Composed of Carbon Sheathed CoSe2 Anchored on Nitrogen‐Doped Carbon Skeleton as Ultrastable Anode for Sodium‐Ion Batteries

Research on sodium‐ion batteries (SIBs) has recently been revitalized due to the unique features of much lower costs and comparable energy/power density to lithium‐ion batteries (LIBs), which holds great potential for grid‐level energy storage systems. Transition metal dichalcogenides (TMDCs) are considered as promising anode candidates for SIBs with high theoretical capacity, while their intrinsic low electrical conductivity and large volume expansion upon Na⁺ intercalation raise the challenging issues of poor cycle stability and inferior rate performance. Herein, the designed formation of hybrid nanoboxes composed of carbon‐protected CoSe₂ nanoparticles anchored on nitrogen‐doped carbon hollow skeletons (denoted as CoSe₂@C∩NC) via a template‐assisted refluxing process followed by conventional selenization treatment is reported, which exhibits tremendously enhanced electrochemical performance when applied as the anode for SIBs. Specifically, it can deliver a high reversible specific capacity of 324 mAh g^?1 at current density of 0.1 A g^?1 after 200 cycles and exhibit outstanding high rate cycling stability at the rate of 5 A g^?1 over 2000 cycles. This work provides a rational strategy for the design of advanced hybrid nanostructures as anode candidates for SIBs, which could push forward the development of high energy and low cost energy storage devices.     

In Situ Encapsulating α‐MnS into N,S‐Codoped Nanotube‐Like Carbon as Advanced Anode Material: α → β Phase Transition Promoted Cycling Stability and Superior Li/Na‐Storage Performance in Half/Full Cells

Incorporation of N,S‐codoped nanotube‐like carbon (N,S‐NTC) can endow electrode materials with superior electrochemical properties owing to the unique nanoarchitecture and improved kinetics. Herein, α‐MnS nanoparticles (NPs) are in situ encapsulated into N,S‐NTC, preparing an advanced anode material (α‐MnS@N,S‐NTC) for lithium‐ion/sodium‐ion batteries (LIBs/SIBs). It is for the first time revealed that electrochemical α → β phase transition of MnS NPs during the 1st cycle effectively promotes Li‐storage properties, which is deduced by the studies of ex situ X‐ray diffraction/high‐resolution transmission electron microscopy and electrode kinetics. As a result, the optimized α‐MnS@N,S‐NTC electrode delivers a high Li‐storage capacity (1415 mA h g^?1 at 50 mA g^?1), excellent rate capability (430 mA h g^?1 at 10 A g^?1), and long‐term cycling stability (no obvious capacity decay over 5000 cycles at 1 A g^?1) with retained morphology. In addition, the N,S‐NTC‐based encapsulation plays the key roles on enhancing the electrochemical properties due to its high conductivity and unique 1D nanoarchitecture with excellent protective effects to active MnS NPs. Furthermore, α‐MnS@N,S‐NTC also delivers high Na‐storage capacity (536 mA h g^?1 at 50 mA g^?1) without the occurrence of such α → β phase transition and excellent full‐cell performances as coupling with commercial LiFePO₄ and LiNi_0.6Co_0.2Mn_0.2O₂ cathodes in LIBs as well as Na₃V₂(PO₄)₂O₂F cathode in SIBs.     

A Flexible Film with SnS2 Nanoparticles Chemically Anchored on 3D‐Graphene Framework for High Areal Density and High Rate Sodium Storage

The design and construction of flexible electrodes that can function at high rates and high areal capacities are essential regarding the practical application of flexible sodium‐ion batteries (SIBs) and other energy storage devices, which remains significantly challenging by far. Herein, a flexible and 3D porous graphene nanosheet/SnS₂ (3D‐GNS/SnS₂) film is reported as a high‐performance SIB electrode. In this hybrid film, the GNS/SnS₂ microblocks serve as pillars to assemble into a 3D porous and interconnected framework, enabling fast electron/ion transport; while the GNS bridges the GNS/SnS₂ microblocks into a flexible framework to provide satisfactorily mechanical strength and long‐range conductivity. Moreover, the SnS₂ nanocrystals, which chemically bond with GNS, provide sufficient active sites for Na storage and ensure the cycling stability. Consequently, this flexible 3D‐GNS/SnS₂ film exhibits excellent Na‐storage performances, especially in terms of high areal capacity (2.45 mAh cm^?2) and high rates with superior stability (385 mAh g^?1 at 1.0 A g^?1 over 1000 cycles with ≈100% retention). A flexible SIB full cell using this anode exhibits high and stable performance under various bending situations. Thus, this work provide a feasible route to prepare flexible electrodes with high practical viability for not only SIBs but also other energy storage devices.     

Boosting High‐Rate Sodium Storage Performance of N‐Doped Carbon‐Encapsulated Na3V2(PO4)3 Nanoparticles Anchoring on Carbon Cloth

The further development of high‐power sodium‐ion batteries faces the severe challenge of achieving high‐rate cathode materials. Here, an integrated flexible electrode is constructed by smart combination of a conductive carbon cloth fiber skeleton and N‐doped carbon (NC) shell on Na₃V₂(PO₄)₃ (NVP) nanoparticles via a simple impregnation method. In addition to the great electronic conductivity and high flexibility of carbon cloth, the NC shell also promotes ion/electron transport in the electrode. The flexible NVP@NC electrode renders preeminent rate capacities (80.7 mAh g^?1 at 50 C for cathode; 48 mAh g^?1 at 30 C for anode) and superior cycle performance. A flexible symmetric NVP@NC//NVP@NC full cell is endowed with fairly excellent rate performance as well as good cycle stability. The results demonstrate a powerful polybasic strategy design for fabricating electrodes with optimal performance.     

Mesoporous NiS2 Nanospheres Anode with Pseudocapacitance for High‐Rate and Long‐Life Sodium‐Ion Battery

It is of great importance to exploit electrode materials for sodium‐ion batteries (SIBs) with low cost, long life, and high‐rate capability. However, achieving quick charge and high power density is still a major challenge for most SIBs electrodes because of the sluggish sodiation kinetics. Herein, uniform and mesoporous NiS₂ nanospheres are synthesized via a facile one‐step polyvinylpyrrolidone assisted method. By controlling the voltage window, the mesoporous NiS₂ nanospheres present excellent electrochemical performance in SIBs. It delivers a high reversible specific capacity of 692 mA h g^?1. The NiS₂ anode also exhibits excellent high‐rate capability (253 mA h g^?1 at 5 A g^?1) and long‐term cycling performance (319 mA h g^?1 capacity remained even after 1000 cycles at 0.5 A g^?1). A dominant pseudocapacitance contribution is identified and verified by kinetics analysis. In addition, the amorphization and conversion reactions during the electrochemical process of the mesoporous NiS₂ nanospheres is also investigated by in situ X‐ray diffraction. The impressive electrochemical performance reveals that the NiS₂ offers great potential toward the development of next generation large scale energy storage.     

Recent Progress in Iron‐Based Electrode Materials for Grid‐Scale Sodium‐Ion Batteries

Grid‐scale energy storage batteries with electrode materials made from low‐cost, earth‐abundant elements are needed to meet the requirements of sustainable energy systems. Sodium‐ion batteries (SIBs) with iron‐based electrodes offer an attractive combination of low cost, plentiful structural diversity and high stability, making them ideal candidates for grid‐scale energy storage systems. Although various iron‐based cathode and anode materials have been synthesized and evaluated for sodium storage, further improvements are still required in terms of energy/power density and long cyclic stability for commercialization. In this Review, progress in iron‐based electrode materials for SIBs, including oxides, polyanions, ferrocyanides, and sulfides, is briefly summarized. In addition, the reaction mechanisms, electrochemical performance enhancements, structure–composition–performance relationships, merits and drawbacks of iron‐based electrode materials for SIBs are discussed. Such iron‐based electrode materials will be competitive and attractive electrodes for next‐generation energy storage devices.     

The State and Challenges of Anode Materials Based on Conversion Reactions for Sodium Storage

Sodium‐ion batteries (SIBs) have huge potential for applications in large‐scale energy storage systems due to their low cost and abundant sources. It is essential to develop new electrode materials for SIBs with high performance in terms of energy density, cycle life, and cost. Metal binary compounds that operate through conversion reactions hold promise as advanced anode materials for sodium storage. This Review highlights the storage mechanisms and advantages of conversion‐type anode materials and summarizes their recent development. Although conversion‐type anode materials have high theoretical capacities and abundant varieties, they suffer from multiple challenging obstacles to realize commercial applications, such as low reversible capacity, large voltage hysteresis, low initial coulombic efficiency, large volume changes, and low cycling stability. These key challenges are analyzed in this Review, together with emerging strategies to overcome them, including nanostructure and surface engineering, electrolyte optimization, and battery configuration designs. This Review provides pertinent insights into the prospects and challenges for conversion‐type anode materials, and will inspire their further study.     

Carbon‐Coated Li3VO4 Spheres as Constituents of an Advanced Anode Material for High‐Rate Long‐Life Lithium‐Ion Batteries

Lithium‐ion batteries are receiving considerable attention for large‐scale energy‐storage systems. However, to date the current cathode/anode system cannot satisfy safety, cost, and performance requirements for such applications. Here, a lithium‐ion full battery based on the combination of a Li₃VO₄ anode with a LiNi_0.5Mn_1.5O₄ cathode is reported, which displays a better performance than existing systems. Carbon‐coated Li₃VO₄ spheres comprising nanoscale carbon‐coating primary particles are synthesized by a morphology‐inheritance route. The observed high capacity combined with excellent sample stability and high rate capability of carbon‐coated Li₃VO₄ spheres is superior to other insertion anode materials. A high‐performance full lithium‐ion battery is fabricated by using the carbon‐coated Li₃VO₄ spheres as the anode and LiNi_0.5Mn_1.5O₄ spheres as the cathode; such a cell shows an estimated practical energy density of 205 W h kg^?1 with greatly improved properties such as pronounced long‐term cyclability, and rapid charge and discharge.     

Exposing {010} Active Facets by Multiple‐Layer Oriented Stacking Nanosheets for High‐Performance Capacitive Sodium‐Ion Oxide Cathode

As one of the most promising cathodes for rechargeable sodium‐ion batteries (SIBs), O3‐type layered transition metal oxides commonly suffer from inevitably complicated phase transitions and sluggish kinetics. Here, a Na[Li_0.05Ni_0.3Mn_0.5Cu_0.1Mg_0.05]O₂ cathode material with the exposed {010} active facets by multiple‐layer oriented stacking nanosheets is presented. Owing to reasonable geometrical structure design and chemical substitution, the electrode delivers outstanding rate performance (71.8 mAh g^?1 and 16.9 kW kg^?1 at 50C), remarkable cycling stability (91.9% capacity retention after 600 cycles at 5C), and excellent compatibility with hard carbon anode. Based on the combined analyses of cyclic voltammograms, ex situ X‐ray absorption spectroscopy, and operando X‐ray diffraction, the reaction mechanisms behind the superior electrochemical performance are clearly articulated. Surprisingly, Ni²⁺/Ni³⁺ and Cu²⁺/Cu³⁺ redox couples are simultaneously involved in the charge compensation with a highly reversible O3–P3 phase transition during charge/discharge process and the Na⁺ storage is governed by a capacitive mechanism via quantitative kinetics analysis. This optimal bifunctional regulation strategy may offer new insights into the rational design of high‐performance cathode materials for SIBs.