ZIF‐8 with Ferrocene Encapsulated: A Promising Precursor to Single‐Atom Fe Embedded Nitrogen‐Doped Carbon as Highly Efficient Catalyst for Oxygen Electroreduction

The oxygen reduction reaction (ORR) plays an important role in the fields of energy storage and conversion technologies, including metal–air batteries and fuel cells. The development of nonprecious metal electrocatalysts with both high ORR activity and durability to replace the currently used costly Pt‐based catalyst is critical and still a major challenge. Herein, a facile and scalable method is reported to prepare ZIF‐8 with single ferrocene molecules trapped within its cavities (Fc@ZIF‐8), which is utilized as precursor to porous single‐atom Fe embedded nitrogen‐doped carbon (Fe–N–C) during high temperature pyrolysis. The catalyst shows a half‐wave potential (E_1/2) of 0.904 V, 67 mV higher than commercial Pt/C catalyst (0.837 V), which is among the best compared with reported results for ORR. Significant electrochemical properties are attributed to the special configuration of Fc@ZIF‐8 transforming into a highly dispersed iron–nitrogen coordination moieties embedded carbon matrix.     

Co‐N‐Doped Mesoporous Carbon Hollow Spheres as Highly Efficient Electrocatalysts for Oxygen Reduction Reaction

Rational design of cost‐effective, nonprecious metal‐based catalysts with desirable oxygen reduction reaction (ORR) performance is extremely important for future fuel cell commercialization, etc. Herein, a new type of ORR catalyst of Co‐N‐doped mesoporous carbon hollow sphere (Co‐N‐mC) was developed by pyrolysis from elaborately fabricated polystyrene@polydopamine‐Co precursors. The obtained catalysts with active Co sites distributed in highly graphitized mesoporous N‐doped carbon hollow spheres exhibited outstanding ORR activity with an onset potential of 0.940 V, a half‐wave potential of 0.851 V, and a small Tafel slope of 45 mV decade^?1 in 0.1 m KOH solution, which was comparable to that of the Pt/C catalyst (20%, Alfa). More importantly, they showed superior durability with little current decline (less than 4%) in the chronoamperometric evaluation over 60 000 s. These features make the Co‐N‐mC one of the best nonprecious‐metal catalysts to date for ORR in alkaline condition.     

Atomic Fe Dispersed on N‐Doped Carbon Hollow Nanospheres for High‐Efficiency Electrocatalytic Oxygen Reduction

Exploration of high‐efficiency, economical, and ultrastable electrocatalysts for the oxygen reduction reaction (ORR) to substitute precious Pt is of great significance in electrochemical energy conversion devices. Single‐atom catalysts (SACs) have sparked tremendous interest for their maximum atom‐utilization efficiency and fascinating properties. Therefore, the development of effective synthetic methodology toward SACs becomes highly imperative yet still remains greatly challenging. Herein, a reliable SiO₂‐templated strategy is elaborately designed to synthesize atomically dispersed Fe atoms anchored on N‐doped carbon nanospheres (denoted as Fe–N–C HNSs) using the cheap and sustainable biomaterial of histidine (His) as the N and C precursor. By virtue of the numerous atomically dispersed Fe–N₄ moieties and unique spherical hollow architecture, the as‐fabricated Fe–N–C HNSs exhibit excellent ORR performance in alkaline medium with outstanding activity, high long‐term stability, and superior tolerance to methanol crossover, exceeding the commercial Pt/C catalyst and most previously reported non‐precious‐metal catalysts. This present synthetic strategy will provide new inspiration to the fabrication of various high‐efficiency single‐atom catalysts for diverse applications.     

Biomass Derived N‐Doped Porous Carbon Supported Single Fe Atoms as Superior Electrocatalysts for Oxygen Reduction

Exploring sustainable and high‐performance electrocatalysts for the oxygen reduction reaction (ORR) is the crucial issue for the large‐scale application of fuel cell technology. A new strategy is demonstrated to utilize the biomass resource for the synthesis of N‐doped hierarchically porous carbon supported single‐atomic Fe (SA‐Fe/NHPC) electrocatalyst toward the ORR. Based on the confinement effect of porous carbon and high‐coordination natural iron source, SA‐Fe/NHPC, derived from the hemin‐adsorbed bio‐porphyra‐carbon by rapid heat‐treatment up to 800 °C, presents the atomic dispersion of Fe atoms in the N‐doped porous carbon. Compared with the molecular hemin and nanoparticle Fe samples, the as‐prepared SA‐Fe/NHPC exhibits a superior catalytic activity (E _1/2 = 0.87 V and J _k = 4.1 mA cm^?2, at 0.88 V), remarkable catalytic stability (≈1 mV negative shift of E _1/2, after 3000 potential cycles), and outstanding methanol‐tolerance, even much better than the state‐of‐the‐art Pt/C catalyst. The sustainable and effective strategy for utilizing biomass to achieve high‐performance single‐atom catalysts can also provide an opportunity for other catalytic applications in the atomic scale.     

Porous Carbon‐Hosted Atomically Dispersed Iron–Nitrogen Moiety as Enhanced Electrocatalysts for Oxygen Reduction Reaction in a Wide Range of pH

As one of the alternatives to replace precious metal catalysts, transition‐metal–nitrogen–carbon (M–N–C) electrocatalysts have attracted great research interest due to their low cost and good catalytic activities. Despite nanostructured M–N–C catalysts can achieve good electrochemical performances, they are vulnerable to aggregation and insufficient catalytic sites upon continuous catalytic reaction. In this work, metal–organic frameworks derived porous single‐atom electrocatalysts (SAEs) were successfully prepared by simple pyrolysis procedure without any further posttreatment. Combining the X‐ray absorption near‐edge spectroscopy and electrochemical measurements, the SAEs have been identified with superior oxygen reduction reaction (ORR) activity and stability compared with Pt/C catalysts in alkaline condition. More impressively, the SAEs also show excellent ORR electrocatalytic performance in both acid and neutral media. This study of nonprecious catalysts provides new insights on nanoengineering catalytically active sites and porous structures for nonprecious metal ORR catalysis in a wide range of pH.     

Framework‐Porphyrin‐Derived Single‐Atom Bifunctional Oxygen Electrocatalysts and their Applications in Zn–Air Batteries

High‐performance bifunctional oxygen electrocatalysis constitutes the key technique for the widespread application of clean and sustainable energy through electrochemical devices such as rechargeable Zn–air batteries. Single‐atom electrocatalysts with maximum atom efficiency are highly considered as an alternative of the present noble‐metal‐based electrocatalysts. However, the fabrication of transition metal single‐atoms is very challenging, requiring extensive attempts of precursors with novel design principles. Herein, an all‐covalently constructed cobalt‐coordinated framework porphyrin with graphene hybridization is innovatively designed and prepared as the pyrolysis precursor to fabricate single‐atom Co–N_x–C electrocatalysts. Excellent electrochemical performances are realized for both bifunctional oxygen electrocatalysis and rechargeable Zn–air batteries with regard to reduced overpotentials, improved kinetics, and prolonged cycling stability comparable with noble‐metal‐based electrocatalysts. Design principles from multiple scales are proposed and rationalized with detailed mechanism investigation. This work not only provides a novel precursor for the fabrication of high‐performance single‐atom electrocatalysts, but also inspires further attempts to develop advanced materials and emerging applications.     

Sustainable Hydrothermal Carbonization Synthesis of Iron/Nitrogen‐Doped Carbon Nanofiber Aerogels as Electrocatalysts for Oxygen Reduction

It is urgent to develop new kinds of low‐cost and high‐performance nonprecious metal (NPM) catalysts as alternatives to Pt‐based catalysts for oxygen reduction reaction (ORR) in fuel cells and metal–air batteries, which have been proved to be efficient to meet the challenge of increase of global energy demand and CO₂ emissions. Here, an economical and sustainable method is developed for the synthesis of Fe, N codoped carbon nanofibers (Fe–N/CNFs) aerogels as efficient NPM catalysts for ORR via a mild template‐directed hydrothermal carbonization (HTC) process, where cost‐effective biomass‐derived d (+)‐glucosamine hydrochloride and ferrous gluconate are used as precursors and recyclable ultrathin tellurium nanowires are used as templates. The prepared Fe/N‐CNFs catalysts display outstanding ORR activity, i.e., onset potential of 0.88 V and half‐wave potential of 0.78 V versus reversible hydrogen electrode in an alkaline medium, which is highly comparable to that of commercial Pt/C (20 wt% Pt) catalyst. Furthermore, the Fe/N‐CNFs catalysts exhibit superior long‐term stability and better tolerance to the methanol crossover effect than the Pt/C catalyst in both alkaline and acidic electrolytes. This work suggests the great promise of developing new families of NPM ORR catalysts by the economical and sustainable HTC process.     

One‐Step Route Synthesized Co2P/Ru/N‐Doped Carbon Nanotube Hybrids as Bifunctional Electrocatalysts for High‐Performance Li–O2 Batteries

The large‐scale commercial application of lithium–oxygen batteries (LOBs) is overwhelmed by the sluggish kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) associated with insoluble and insulated Li₂O₂. Herein, an elaborate design on a highly catalytic LOBs cathode constructed by N‐doped carbon nanotubes (CNT) with in situ encapsulated Co₂P and Ru nanoparticles is reported. The homogeneously dispersed Co₂P and Ru catalysts can effectively modulate the formation and decomposition behavior of Li₂O₂ during discharge/charge processes, ameliorating the electronically insulating property of Li₂O₂ and constructing a homogenous low‐impedance Li₂O₂/catalyst interface. Compared with Co/CNT and Ru/CNT electrodes, the Co₂P/Ru/CNT electrode delivers much higher oxygen reduction triggering onset potential and higher ORR and OER peak current and integral areas, showing greatly improved ORR/OER kinetics due to the synergistic effects of Co₂P and Ru. Li–O₂ cells based on the Ru/Co₂P/CNT electrode demonstrate improved ORR/OER overpotential of 0.75 V, excellent rate capability of 12 800 mAh g^?1 at 1 A g^?1, and superior cycle stability for more than 185 cycles under a restricted capacity of 1000 mAh g^?1 at 100 mA g^?1. This work paves an exciting avenue for the design and construction of bifunctional catalytic cathodes by coupling metal phosphides with other active components in LOBs.     

Atomically Dispersed Binary Co‐Ni Sites in Nitrogen‐Doped Hollow Carbon Nanocubes for Reversible Oxygen Reduction and Evolution

With the inspiration of developing bifunctional electrode materials for reversible oxygen electrocatalysis, one strategy of heteroatom doping is proposed to fabricate dual metal single‐atom catalysts. However, the identification and mechanism functions of polynary single‐atom structures remain elusive. Atomically dispersed binary Co‐Ni sites embedded in N‐doped hollow carbon nanocubes (denoted as CoNi‐SAs/NC) are synthesized via proposed pyrolysis of dopamine‐coated metal‐organic frameworks. The atomically isolated bimetallic configuration in CoNi‐SAs/NC is identified by combining microscopic and spectroscopic techniques. When employing as oxygen electrocatalysts in alkaline medium, the resultant CoNi‐SAs/NC hybrid manifests outstanding catalytic performance for bifunctional oxygen reduction/evolution reactions, boosting the realistic rechargeable zinc–air batteries with high efficiency, low overpotential, and robust reversibility, superior to other counterparts and state‐of‐the‐art precious‐metal catalysts. Theoretical computations based on density functional theory demonstrate that the homogenously dispersed single atoms and the synergistic effect of neighboring Co‐Ni dual metal center can optimize the adsorption/desorption features and decrease the overall reaction barriers, eventually promoting the reversible oxygen electrocatalysis. This work not only sheds light on the controlled synthesis of atomically isolated advanced materials, but also provides deeper understanding on the structure–performance relationships of nanocatalysts with multiple active sites for various catalytic applications.     

Co–Fe Alloy/N‐Doped Carbon Hollow Spheres Derived from Dual Metal–Organic Frameworks for Enhanced Electrocatalytic Oxygen Reduction

Metal–organic framework (MOF) composites have recently been considered as promising precursors to derive advanced metal/carbon‐based materials for various energy‐related applications. Here, a dual‐MOF‐assisted pyrolysis approach is developed to synthesize Co–Fe alloy@N‐doped carbon hollow spheres. Novel core–shell architectures consisting of polystyrene cores and Co‐based MOF composite shells encapsulated with discrete Fe‐based MOF nanocrystallites are first synthesized, followed by a thermal treatment to prepare hollow composite materials composed of Co–Fe alloy nanoparticles homogeneously distributed in porous N‐doped carbon nanoshells. Benefitting from the unique structure and composition, the as‐derived Co–Fe alloy@N‐doped carbon hollow spheres exhibit enhanced electrocatalytic performance for oxygen reduction reaction. The present approach expands the toolbox for design and preparation of advanced MOF‐derived functional materials for diverse applications.     

Progress in the Development of Fe‐Based PGM‐Free Electrocatalysts for the Oxygen Reduction Reaction

Development of alternative energy sources is crucial to tackle challenges encountered by the growing global energy demand. Hydrogen fuel, a promising way to store energy produced from renewable power sources, can be converted into electrical energy at high efficiency via direct electrochemical conversion in fuel cells, releasing water as the sole byproduct. One important drawback to current fuel‐cell technology is the high content of platinum‐group‐metal (PGM) electrocatalysts required to perform the sluggish oxygen reduction reaction (ORR). Addressing this challenge, remarkable progress has been made in the development of low‐cost PGM‐free electrocatalysts synthesized from inexpensive, earth‐abundant, and easily sourced materials such as iron, nitrogen, and carbon (Fe–N–C). PGM‐free Fe–N–C electrocatalysts now exhibit ORR activities approaching that of PGM electrocatalysts but at a fraction of the cost, promising to significantly reduce overall fuel‐cell technology costs. Herein, recent developments in PGM‐free electrocatalysis, demonstrating increased fuel‐cell performance, as well as efforts aimed at understanding the key limiting factor, i.e., the nature of the PGM‐free active site, are summarized. Further improvements will be accomplished through the controlled and/or rationally designed synthesis of materials with higher active‐site densities, while at the same time establishing methods to mitigate catalyst degradation.     

Biomolecule‐Doped PEDOT with Three‐Dimensional Nanostructures as Efficient Catalyst for Oxygen Reduction Reaction

Metal macro‐cyclic compounds have drawn considerable attention as alternative catalysts for oxygen reduction reaction. However, the continuous pyrolysis process usually needed for improving the performance of these compounds require an elevated temperature and complicated procedures, thus leading to an unpredictable transformation of the chemical structures and limiting their applications. Herein, we develop a new insight to fabricating hemin‐doped poly (3,4‐ethylenedioxythiophene) (PEDOT) with controllable three‐dimensional nanostructures via a one‐step, tri‐phase, self‐assembled polymerization routine. We demonstrate that the hemin‐induced synergistic effect results in a very high 4‐electron oxygen reduction activity, a better stability, and free from methanol crossover effects even in a neutral phosphate buffer solution (PBS).