Short-term healing following the use of calcium sulfate as a grafting material for sinus augmentation: a clinical report

Because of the frequent lack of bone in the posterior maxilla, sinus augmentation has become a commonly practiced treatment modality. Many different materials have been used for augmenting the sinus, and the ideal graft is yet to be found. The present article reports the results of sinuses grafted with calcium sulfate in 2 patients. Bone biopsies were harvested 9 months after the augmentation procedure. In the first patient, 3 titanium threaded-cylinder implants were placed in the grafted area after 9 months, while in the second, 1 acid-etched, screw-shaped titanium implant was placed simultaneously with the graft. Light microscopic evaluation revealed new bone formation with ongoing remodeling and progressive lamellar maturation in the specimens. No remnants of the alloplastic material were detectable in any section, either within the bone or in the medullary tissue. When reevaluated at the uncovering procedure, the implants were radiographically and clinically judged to be osseointegrated. These observations suggest that, when used in the appropriate form and with the proper technique, calcium sulfate is a promising graft material for sinus augmentation, producing adequate quantity and quality of new bone for implant placement.     

Long-term evaluation of the use of coralline hydroxyapatite in orthognathic surgery

PURPOSE: This prospective study was designed to evaluate the long-term clinical and radiographic results of porous block hydroxyapatite (PBHA) used as a synthetic bone graft in orthognathic surgery and craniofacial augmentation. PATIENTS AND MATERIALS: A total of 245 consecutive patients were treated initially. Inclusion criteria for this study included a minimum clinical and radiographic follow-up of 5 years. In addition, all patients with known implant failures were included regardless of whether they met the study criteria. There were 111 patients that met the criteria for inclusion in this study. All patients had undergone orthognathic surgery with rigid fixation and had had inlay or onlay PBHA implants placed. Ninety-six percent of the implants were placed through an intraoral approach. Long-term postoperative radiographs were visually compared with immediate postoperative radiographs for implant position, stability, resorption, and other significant radiographic changes. The clinical examination evaluated for signs and symptoms of infection, wound dehiscence, implant exposure, implant displacement, changes in the overlying mucosa, and development of oronasal or oroantral fistulae. RESULTS: Four hundred seventy-one implants were placed: 403 in the maxilla, 44 in the mandible, and 24 in the periorbital region. There were 289 implants placed in direct communication with the maxillary sinus. The average follow-up time was 7.2 years (range, 5.0 to 10.3 years). Twenty-three implants (4.9%) were removed during the evaluation period. Lateral maxillary wall grafting had 95.7% success, with nine implants being lost in three patients. One chin implant was removed because of dissatisfaction with the aesthetics. Seven (14%) midpalatal implants used for maxillary expansion were lost, primarily because of exposure of the implant to the oral or nasal cavity at the time of surgery. When PBHA was used for alveolar cleft grafting, there was a 100% failure rate. CONCLUSION: The use of PBHA as a bone graft substitute in orthognathic surgery and for facial augmentation showed a high percentage of success and efficacy. However, adequate soft tissue coverage in the nasal floor and on the palate are paramount for success of midpalatal implants. PBHA should not be used for alveolar cleft grafting. Rigid fixation for inlay implants in the maxilla is important to provide stress shielding of the material and minimize micromovement during the initial healing phase.     

Histologic analysis of clinically retrieved titanium microimplants placed in conjunction with maxillary sinus floor augmentation

In this study, a new approach involving placement and subsequent retrieval of titanium microimplants was employed for the histologic investigation of the implant-tissue interface in conjunction with maxillary sinus floor augmentation. Nine patients scheduled for sinus floor augmentation and simultaneous placement of Br?nemark implants were included in the study. After a sinus graft procedure and placement of implants, an additional microimplant was placed into the graft through the lateral wall of the sinus. At abutment connection, the microimplants were retrieved using a 3- or 5-mm-wide trephine drill. Six specimens were retrieved after 6 to 14 months from sites augmented with particulate radiated mineralized cancellous allograft. Another six implants were retrieved after 6 to 12 months from maxillary sinuses augmented with particulate autogenous bone grafts. The histologic analysis showed distinct differences between the two types of grafts. The sites with autogenous bones grafts displayed a normal morphology of bone and bone marrow, including formation of bone on the surfaces of the grafted particles and remodeling of newly formed as well as grafted bone. The bone was more mature after 11 to 14 months than at 6 months. The allografted sites had a mixed morphologic appearance of newly formed bone and nonviable allograft particles (about 75% of the total bone area) in loose connective tissue. Significantly more bone was found at the autografted than at the allografted implants. The use of autogenous bone for augmentation of the maxillary sinus floor resulted in a greater amount of viable bone surrounding the implant; however, simultaneous placement of implants apparently resulted in a low proportion of bone-implant contact after 6 to 14 months irrespective of graft type.     

Bicyclic derivatives of hexahydroaporphine: novel agents that lower intraocular pressure

The aim of this study was to evaluate clinically, histologically and histometrically the use of hydroxyapatite-coated dental implants in conjunction with maxillary sinus augmentation procedures. In 4 adult male Rhesus monkeys (Macaca mulatta) the 3 maxillary molars on 1 side of the jaws were extracted and the remaining bone between the alveolar crest and the floor of the sinus was reduced to 3-4 mm. After 3 months, maxillary sinus augmentation procedures were performed in each monkey and the sinuses were grafted with a porous hydroxyapatite bone graft (Interpore-200). At the same time, 2 hydroxyapatite-coated cylinder implants (IMZ) were immediately placed into the augmented sinuses (i.e. simultaneous-implants-loaded group). Four months later, 2 additional similar implants were placed into the previously augmented sinuses (i.e. delayed-implants-loaded group). After 4 months, the abutment connection was performed and all 4 implants were loaded with a gold-alloy bridge for 6 months (i.e. until sacrifice of the animals). The contralateral side of each monkey received the same treatment with the exception that removal of the maxillary molars was performed 7 months after those in the opposite side, and that the implants in this side were not loaded. Thus, 2 additional study groups (i.e. simultaneous-implants-unloaded group and delayed-implants-unloaded group) were obtained. Clinically, all loaded and unloaded implants were stable the day of sacrifice. Histologically, the grafted sinuses exhibited a significant amount of new bone formation with integration of the porous hydroxyapatite graft particles and hydroxyapatite-coat of the dental implants to the new bone. Histometric analysis indicated that on the loaded side the implants placed simultaneously with the sinus lift procedure exhibited greater direct mineralized bone-to-implant contact than the delayed placed implants. In addition, the percentage of direct mineralized bone-to-implant contact was significantly greater in the residual bone in comparison to the augmented area in all groups. Loading of the implants exhibited a positive effect on the percentage of direct mineralized bone-to-implant contact in the augmented area. It could be concluded that hydroxyapatite-coated implants may be of benefit when used in conjunction with sinus augmentation procedures.     

Maxillary sinus augmentation using different grafting materials and dental implants in monkeys. Part I. Evaluation of anorganic bovine-derived bone matrix

The aim of this study was to evaluate clinically, histologically and histometrically the use of anorganic bovine bone matrix (i.e. Bio-oss) as a grafting material for maxillary sinus augmentation procedures. In 4 adult male rhesus monkeys (i.e. Macaca mulatta) the 1st, 2nd and 3rd maxillary molars on one side of the jaws were extracted. The remaining bone between the alveolar crest and the bottom of the sinus was then reduced to 3-4 mm. After 3 months, maxillary sinus augmentation procedures were performed on one side of the jaws in each monkey and the sinuses were grafted with the bovine bone matrix. At that time, 2 IMZ pure titanium plasma coated implants were immediately placed into the augmented sinuses (i.e. simultaneous implants-loaded group). After 4 months, 2 additional similar implants were placed into these previously augmented sinuses (i.e. delayed implants-loaded group). Four months later, the abutment connection was performed and all 4 implants were loaded with a gold-alloy bridge for 6 months (i.e. until sacrifice of the animals). The contralateral side of each monkey received the same treatment with the exception that the extractions were performed 7 months after those in the opposite side and that the implants in this side were not loaded. Thus, 2 additional study groups (i.e. simultaneous implants-unloaded group and delayed implants-unloaded group) were obtained. Clinically, all loaded implants were stable at the day of sacrifice. Histologically, the grafted sinuses exhibited significant bone formation with integration of the bovine bone matrix particles to the new bone. Direct mineralized bone-to-implant contact was greater for the delayed implant placement groups than for the implants installed simultaneously with the sinus augmentation. Furthermore, the percentage of direct mineralized bone-to-implant contact was greater in the residual bone than in the augmented area. It was concluded that the anorganic bovine bone matrix facilitated bone formation and implant osseointegration in the augmented sinuses and that the delayed implant placement in combination with the sinus augmentation procedure seemed to be preferable.     

Clinical evaluations of a porous-surfaced endosseous implant system

Clinical evaluations of a new porous-surfaced implant concept (Endopore) in a large population of fully and partially edentulous patients are reported, and a technique of spreading buccal and lingual plates with osteotomes to place these implants in proximity to the sinus of the posterior maxilla is described. Three-dimensional, interconnecting pores on this implant's bone interface surface give a great surface area for bone engagement. When the maxilla is prepared by this spreading procedure, these implants can be successfully placed in areas having limited available bone. Our success rates are 97.0% for implants stabilizing a mandibular overdenture and 94.8% for implants placed in partially edentulous patients. Many times, sinus lift or other augmentation procedures can be avoided in the maxilla and mandible, allowing for less patient morbidity and for an implant reconstruction that is more affordable for the patient.     

Indirect sinus augmentation procedures using one-stage anatomically shaped root-form implants

Sinus augmentation procedures are a standard part of implant dentistry. Indirect sinus augmentation procedures reduce the magnitude of the surgery when sinus lift procedures are necessary. This article describes a variation of the indirect augmentation of maxillary sinuses. The surgery is performed through small diameter surgical access openings. This modified indirect sinus augmentation procedure is combined with the immediate placement of one-stage dental implants that effectively seal the surgical access openings and have an anatomical exit profile for easier restoration.     

The use of osteotomes for sinus augmentation at the time of implant placement

The placement of endosseous dental implants is often hampered by the loss of alveolar bone. In the posterior maxilla, the presence of the maxillary sinus and less-dense bone present additional obstacles to successful implant placement. Existing methods of subantral augmentation require extensive surgical manipulation, often including a second surgical site for harvesting autogenous bone. The development of surgical osteotomes has facilitated the placement of implants in areas of minimal alveolar bone height in the posterior maxilla. This article describes the osteotome technique for sinus augmentation at the time of implant placement and presents a short-term evaluation of 34 implants placed in 18 patients.     

Chromosomal localization of a human mucin gene (MUC8) and cloning of the cDNA corresponding to the carboxy terminus

The objective of this study was to determine the predictability of endosseous implants placed in a maxillary sinus grafted with a mixture of bovine porous bone mineral and demineralized freeze-dried bone. Sixty implants were placed in 20 patients representing 28 sinuses using either a one- or two-stage technique. After an implant loading period of more than 2 years, the survival rate (eg, a clinically functioning implant without signs of mobility or infection) varied from 90% to 96%. No infections or other complications were encountered. The data suggest that this treatment regimen can result in a high rate of survival.     

Maxillary sinus augmentation in the non-human primate: a comparative radiographic and histologic study between recombinant human osteogenic protein-1 and natural bone mineral

The posterior maxilla has traditionally been one of the most difficult areas to successfully place dental implants due to poor bone quality and close approximation to the maxillary sinus. Sinus augmentation procedures have become a viable means of assuring adequate bone for the placement of dental implants in this area. However, with the techniques currently employed, a considerable variation in the quality of bone attained with the sinus augmentation procedure exists. The purpose of this in vivo study was to evaluate the healing response and bone formation stimulated by 3 doses of recombinant human osteogenic protein-1 (rhOP-1), 0.25, 0.6, and 2.5 mg OP-1 per gram of collagen matrix; natural bone mineral; or collagen matrix alone (control) placed in the maxillary sinus of adult chimpanzees. Results were assessed using clinical, histologic, and radiographic techniques. Radiographic analysis of the computed tomography scans taken at 1 week, and 2.5, 4.5, and 6.5 months revealed a more rapid mineralization with the 2.5 mg OP-1/g collagen matrix and natural bone mineral treatment groups. The incremental bone mineral density (BMD) increase for these 2 treatments from 1 week to 2.5 months was over 2.5 times the increase found with the collagen matrix alone; these 2 treatments also had a higher BMD at the most superior slices evaluated when compared to the other 3 groups. Biopsy specimens were taken at 3.5, 5.5, and 7.5 months and for all 5 treatment groups bone formation was observed at all time points in the majority of the specimens. At 7.5 months the 2.5 and 0.6 mg OP-1/g collagen matrix treatment groups had an increase in the percent bone area when compared to the matrix alone control. In conclusion, these results demonstrate that sinus augmentation with natural bone mineral or 2.5 mg OP-1/g collagen matrix induce comparable radiographic and histologic evidence of bone formation and that both of these treatments performed superior to the control group of collagen matrix alone based upon all methods of evaluation.     

Statistical research needs in mechanistic modelling for carcinogenic risk assessment

This study reports the results of implant therapy involving a sinus membrane lift as well as conventional implant therapy in 24 periodontally compromised patients who were treated during the period between June 1990 and May 1995. Patients were included on the basis of being in need of at least 2 implants, 1 of which was to be placed in the maxillary sinus region, and at least 3 mm bone height was required in the sinus region. Following fenestration of the lateral sinus wall and lifting of the sinus membrane sinus implants were inserted as described for conventional implants. Annual follow-up visits included recording of plaque, probing pocket depth and bleeding on probing, and recording of the radiographic distance from the implant shoulder to the alveolar crest in mm. The Astra, Astra sinus, ITI, and ITI sinus were observed for an average of 30.8, 29.9, 29.4 and 25.3 months, respectively. Of the 80 implants inserted 1 Astra and 2 ITI had failed at 11-12 months and 1 ITI had failed at 42 months. The Kaplan-Meier estimate of the proportion of non-failed implants at 36 months were 100%, 95%, 91%, and 86% for the Astra, Astra sinus, ITI, and ITI sinus implants, respectively. Of the Astra, Astra sinus, and ITI implants, 71-82% remained free from bone-loss > or = 1.5 mm at 36 months, whereas this was the case for only 29% of the ITI sinus implants. About 80-90% of the implants remained free from plaque; 65-86% remained free from bleeding; and 44-80% remained free from pockets > or = 4 mm. These results indicate that the sinus lift technique can be used successfully in periodontally compromised patients.     

Biomechanical and histologic alteration of facial recipient bone after reconstruction with autogenous bone grafts and alloplastic implants: a 1-year study

Potential alteration of the underlying recipient bone resulting from a graft or implant has significant clinical relevance. The present study was designed to evaluate the biomechanical and histologic alteration of facial recipient bone with autogenous bone graft and alloplastic implants over a 1-year period. The bilateral arches of 15 rabbits were randomized between four groups: (1) control (n = 6), subperiosteal exposure of the zygomatic arch was made; (2) onlay (n = 12), bone graft was placed as an onlay to the zygomatic arch; (3) inlay (n = 6), bone graft was placed as an inlay within the zygomatic arch; (4) implant (n = 6), a stainless steel plate was placed as an onlay to the zygomatic arch. Animals were killed 1 year after grafting. In the onlay groups, all steel implants and half of the onlay bone grafts (n = 6) were separated from the zygomatic arch; the remaining onlay bone grafts (n = 6) were left on the zygomatic arch. Three-point breaking strength was measured through the center of the graft/implant site on the zygomatic arch, followed by histologic evaluation and histometric assessment of residual bone density. The findings demonstrated no difference in the breaking strength per unit bone area between the control zygomatic arch group and the onlay group in which the bone graft was left in place. Breaking strength of the zygomatic arch in the former two groups was significantly greater than that in either group in which the onlay bone graft or implant had been removed, and was also greater than the breaking strength in that group in which inlay bone had been placed (p < 0.05). Histologic assessment showed full-thickness conversion in architecture of the zygomatic arch from compact to woven bone beneath onlays of either autogenous bone graft or steel implant; histometric assessment demonstrated an accompanying decrease in bone density in the latter groups relative to the control zygoma (p < 0.05). We conclude that onlay autogenous bone graft and alloplastic implants to the facial skeleton induce transformation of both graft and recipient bone from compact to woven architecture, accompanied by a reduction in bone density. The biomechanical strength of recipient facial bone is significantly weakened if an onlay bone graft or implant is removed. Weakening occurs per unit area of remaining bone, and is therefore independent of any thinning that may occur within the recipient bone because of graft/implant placement. These findings may impact upon decisions to augment stress-bearing regions of the facial skeleton with bone graft or implants, particularly if the graft/implant may eventually require removal.     

Radiographic modalities for diagnosis and treatment planning in implant dentistry

Early in the development of implant technology it became apparent that conventional dental imaging techniques were limited for evaluating patients for implant surgery. During the treatment planning phase, the recipient bed is routinely assessed by visual examination and palpation, as well as by periapical and panoramic radiology. These two imaging modalities provide a two-dimensional image of mesial-distal and occlusal-apical dimensions of the edentulous regions where implants might be placed. When adequate occlusal-apical bone height is available for endosteal implants, the buccal-lingual width and angulation of the available bone are the most important criteria for implant selection and success. However, neither buccal-lingual width nor angulation can be visualized on most traditional radiographs. Although clinical examination and traditional radiographs may be adequate for patients with wide residual ridges that exhibit sufficient bone crestal to the mandibular nerve and maxillary sinus, these methods do not allow for precise measurement of the buccolingual dimension of the bone or assessment of the location of unanticipated undercuts. For these concerns, it is necessary to view the recipient site in a plane perpendicular to a curved plane through the arch of the maxilla or mandible in the region of the proposed implants. Implant dentists soon recognized that, for optimum placement of implants, cross-sectional views of the maxilla and mandible were the ideal means of providing necessary pre-operative information. Today, the two most often employed and most applicable radiographic studies for implant treatment planning are the panoramic radiograph and tomography. Although distortion can be a major problem with panoramic radiographs, when performed properly they can provide valuable information, and are both readily accessible and cost efficient. To help localize potential implant sites and assist in obtaining accurate measurements, it is recommended that surgical stents be used with panoramic radiographs. In simple cases, where a limited number of implants are to be placed, panoramic radiography and/or tomography may be used to obtain a view of the arch of the jaw in the area of interest. For complex, cases, where multiple implants are required, the CT scan imaging procedure is recommended. Because of its ability to reconstruct a fully three dimensional model of the maxilla and mandible, CT provides a highly sophisticated format for precisely defining the jaw structure and locating critical anatomic structures. The use of CT scans in conjunction with software that renders immediate "treatment plans" using the most real and accurate information provides the most effective radiographic modality currently available for the evaluation of patients for oral implants. To follow patients after implant surgery, DSR can be helpful by addressing the limitations of other radiographic modalities in detecting postoperative changes. By eliminating unchanged information, DSR allows the clinician's eye to focus on actual changes that have occurred between the recordings of two images.     

Histologic evaluation of osseointegrated implants restored in nonaxial functional occlusion with preangled abutments

Of concern with the use of preangled abutments on implants is the transmission of masticatory forces and the angle at which they occur. Nineteen endosseous implants were placed in two subhuman primates. After 6 months, to allow for osseointegration, the implants were fitted with preangled abutments of various degrees and restored with type IV alloy castings. Straight abutments were used as control. Histologic evaluation revealed that, after 1 year of service, the implants exhibited complete osseointegration. Implants, whether restored with straight or preangled abutments, had no adverse effect on the surrounding bone. Soft tissue pockets measured, on average, from 2.2 to 2.6 mm; acute and chronic inflammatory cells were present. When crown loss was observed, it was caused by mechanical failure of components, such as gold screws and the screws used to secure the preangled abutments to the implants. Preangled abutments appear to be a valuable adjunct in implant dentistry, although long-term studies are needed for confirmation.     

Reconstruction of residual alveolar cleft defects with one-stage mandibular bone grafts and osseointegrated implants

PURPOSE: This study evaluates a treatment regimen for reconstruction of residual maxillary alveolar cleft defects consisting of mandibular bone grafting and immediate implant installation. PATIENTS AND METHODS: Sixteen cleft patients (five female and 11 male) had residual cleft defects of the alveolar ridge reconstructed with bone grafts from the mandibular symphyseal region. The bone graft was pretapped at the donor site before fixation in the residual ridge with Br?nemark implants. Twenty implants were installed according to this concept. The period of observation ranged from 36 to 69 months, with a mean of 48 months after implant installation. RESULTS: Five patients developed wound dehiscenses that resulted in total or partial bone graft sequestration. Two implants were lost, one due to sequestration and the other due to mobility at the abutment procedure; 18 implants were still well functioning at the end of the observation period. However, all patients showed significant periimplant bone resorption after this one-stage treatment. CONCLUSION: Because of the observed complication rate, the one-stage procedure may not be optimal for reconstructing residual cleft defects.     

Nasal lavage as tool for health effect assessment of photochemical air pollution

In order to achieve esthetically more satisfying results, it has been proposed to place ITI implants with their border between the rough and smooth surfaces below the level of the alveolar crest, thereby obtaining a submucosally located implant shoulder following healing. The aim of the present experimental study was to clinically and radiographically evaluate the tissue response to the placement of one-stage transmucosal implants with the border between the rough and the smooth surfaces sunk by 1 mm into a subcrestal location. 11 patients underwent comprehensive dental care including the placement of 2 implants of the ITI Dental Implant System in the same quadrant (test and control). Randomly assigned control implants were placed according to the manufacturer's instructions, i.e. the border between the rough titanium plasma-sprayed and the smooth polished surfaces precisely at the alveolar crest. At the test implant the apical border of the polished surface was placed approximately 1 mm below the alveolar crest. Probing bone levels were assessed at implant placement (baseline), 4 and 12 months later. Modified plaque and modified gingival indices were recorded at 1, 2, 3, 4 and 12 months. Clinical probing depth and "attachment" levels were measured at 4 and 12 months. All parameters were assessed at 6 sites around each implant. The mean for each implant was calculated and used for analysis. The Wilcoxon matched pairs signed rank test and the Student t-test were applied to detect differences over time and between the test and control implants. At baseline, a mean difference in probing bone level of -0.86 mm (SD 0.43 mm, p < 0.05) was found between test and control implants with the test implants being placed more deeply. Both test and control implants lost a significant amount of clinical bone height during the first 4 months (test 1.16 mm, p < 0.05; control 0.58 mm, p < 0.05). However, only the test implants significantly lost clinical bone height from 4-12 months (test 1.04 mm, p < 0.05; control 0.45 mm, p = 0.08). Overall, the test implants lost 2.26 mm and the control implants 1.02 mm of bone height during the first year of service. On the average, the test implants demonstrated a bone level of 0.38 mm lower than the controls at 12 months. Except for the modified gingival index at 4 months (mean difference 0.21, SD 0.19, p < 0.05), no clinical parameters yielded significant differences between test and control implants at any time. It is concluded that in addition to the crestal bone resorption occurring at implants placed under standard conditions, the bone adjacent to the polished surface of more deeply placed ITI implants is also lost over time. From a biological point of view, the placement of the border between the rough and the smooth surfaces into a subcrestal location should not be recommended.     

Observations on 25 patients treated with ball-retained overdentures using the Astra Tech implant system

Twenty-five adult patients with fully edentulous jaws, aged from 44 to 80 years were treated with seventy-one 3.5 mm diameter Astra Tech dental implants in the parasymphseal region. The length of these implants varied from 9 mm to 15 mm. Either two or three implants were inserted, subsequently exposed after a minimum period of 3 months, abutments and ball attachments placed. Full lower dentures incorporating gold alloy housings for ball-attachments were constructed. The average time that the implants were in situ was 4 years and 2 months, ranging from 1 year 3 months to 5 years and 7 months. Of the 71 implants placed, 67 achieved osseointegration-a success rate of 94%. The main complication was that of the ball-attachments becoming loose.     

Magnetic resonance imaging lesion analysis in neurofibromatosis type 1

The purpose of this prospective study was to investigate the clinical outcome and marginal bone resorption of three different endosseous implants placed in the anterior mandibles of 15 elderly patients. Eleven women and 4 men (ranging from 65 to 80 years, mean 71 years) had three different endosseous implants placed in the anterior mandible; one titanium plasma-sprayed cylinder implant (4-mm diameter), one titanium cylinder implant with hydroxyapatite coating (4-mm diameter), and one standard threaded titanium implant (3.75-mm diameter). Three months later, at the second-stage surgical procedure, ball abutments were connected and an overdenture was placed. At 12, 24, and 36 months, marginal bone resorption and Periotest values were recorded. None of the implants was lost in this period. An analysis of variance with repeated measurement was performed annually to test the existence of significant differences between the implants. When differences appeared, paired t tests were used to identify which differences were significant. Bonferroni multipliers were used to adjust for multiple testing. When marginal bone resorption was concerned, threaded titanium and hydroxyapatite-coated implants had significantly better scores than titanium plasma-sprayed cylinder implants. Periotest values for hydroxyapatite-coated implants were significantly better than test values for the other implants after 2 years. After 3 years significance was obtained between hydroxyapatite and screw-shaped implants only (P < .05). It was concluded that titanium plasma-sprayed cylinder implants have a less favorable prognosis than the other implants used in this study.     

Mean fetal growth curve adjustment]

OBJECTIVE: Three-dimensional models created by milling machines and stereolithography on the basis of 3-dimensional computed tomography scans have become essential in the diagnosis and therapy planning of oral and maxillofacial disorders. The purpose of this study, based on 3 clinical cases, was to examine the advantages of using 3-dimensional computed tomography scans and 3-dimensional milling models of the maxillary sinus before operative sinus elevation and of developing an operative layout with the aid of 3-dimensional models. REPORT DESIGN: Three patients with atrophy of the maxillary alveolar ridge received computed tomography scans before operative sinus elevation with iliac bone transplants and simultaneous dental implantation. These computed tomography data were used to create 3-dimensional graphic and plastic reconstructions of the maxillary sinuses. RESULTS: The 3-dimensional milling models enabled the development of an exact preoperative layout that took into consideration the exact shape of the iliac bone and the selection of dental screw implants. Furthermore, the models offered the possibility of producing an acrylic device for precise implant insertion. Precise planning resulted in good success with implantation 2 years after surgery. CONCLUSION: Three-dimensional diagnosis and treatment layout have become an acknowledge method of operative maxillary sinus floor augmentation combined with simultaneous dental implantation in the upper jaw in difficult cases of sinus lift operations. As far as transplant shape and sinus anatomy are concerned, this has resulted in greater intraoperative precision. A 1-step procedure can thus be performed for augmentation and implantation through use of a well-adapted block transplant and dental screw implants in patients with extensive alveolar ridge atrophy.     

1H and 15N resonance assignment of neural cell adhesion molecule module-2

This article presents a simple, inexpensive method for precisely locating the floor of the maxillary sinus, as well as the presence of any septa, at the time of sinus augmentation surgery. Using an anesthesia light wand placed transnasally to illuminate the sinus, the surgeon can reliably elevate the lateral maxillary wall overlying the sinus with relative ease without fear of placing the osteotomy cuts too far from the sinus floor. The same procedure can be used postoperatively to evaluate the density of the bone graft placed into the sinus prior to closure.