Eliciting preferences on the design of hydrogen refueling infrastructure

Hydrogen vehicles are already a reality, However, consumers will be reluctant to purchase hydrogen vehicles (or any other alternative fuel vehicle) if they do not perceive the existence of adequate refueling infrastructure that reduces the risk of running out of fuel regularly while commuting to acceptable levels. This fact leads to the need to study the minimum requirements in terms of fuel availability required by drivers to achieve a demand for hydrogen vehicles beyond potential early-adopters.This paper studies consumer preferences in relation to the design of urban hydrogen refueling infrastructure. To this end, the paper analyzes the results of a survey carried out in Andalusia, a region in southern Spain, on drivers' current refueling tendencies, their willingness to use hydrogen vehicles and their minimum requirements (maximum distance to be traveled to refuel and number of stations in the city) when establishing a network of hydrogen refueling stations in a city. The results show that consumers consider the existence in cities of an infrastructure with a number of refueling stations ranging from approximately 10 to 20% of the total number of conventional service stations as a requisite to trigger the switch to the use of hydrogen vehicles. In addition, these stations should be distributed in response to the drivers’ preferences to refuel close to home.     

Quantitative analysis of a successful public hydrogen station

Reliable hydrogen fueling stations will be required for the successful commercialization of fuel cell vehicles. An evolving hydrogen fueling station has been in operation in Irvine, California since 2003, with nearly five years of operation in its current form. The usage of the station has increased from just 1000 kg dispensed in 2007 to over 8000 kg dispensed in 2011 due to greater numbers of fuel cell vehicles in the area. The station regularly operates beyond its design capacity of 25 kg/day and enables fuel cell vehicles to exceed future carbon reduction goals today. Current limitations include a cost of hydrogen of $15 per kg, net electrical consumption of 5 kWh per kg dispensed, and a need for faster back-to-back vehicle refueling.     

Turn of the century refueling: A review of innovations in early gasoline refueling methods and analogies for hydrogen

During the first decades of the 20th century, a variety of gasoline refueling methods supported early US gasoline vehicles and successfully alleviated consumer concerns over refueling availability. The refueling methods employed included cans, barrels, home refueling outfits, parking garage refueling facilities, mobile stations, hand carts and curb pumps. Only after robust markets for gasoline vehicles had been firmly established did the gasoline service station become the dominant refueling method. The present study reviews this history and draws analogies with current and future efforts to introduce hydrogen as a fuel for vehicles. These comparisons hold no predictive power; however, there is heuristic value in an historical review of the first successful and large-scale introduction of a vehicle fuel. From an energy policy perspective, these comparisons reinforce the importance of a long-term and portfolio approach to support for technology development and innovation.     

Density of alternative fuel stations and refueling availability

This paper develops an analytical model for determining sufficient density of alternative fuel stations required to achieve a certain level of service. The service level is represented as the probability that the vehicle can make the repeated round trip between randomly selected origin and destination. Distance is measured as the Euclidean distance on a continuous plane. The probability is obtained for regular and random patterns of stations for three cases: fuel is available at both origin and destination, fuel is available at either origin or destination, and fuel is available at neither origin nor destination. The analytical expressions for the probability demonstrate how the density of stations, the vehicle range, and the trip length, as well as the refueling availability at origin and destination affect the service level. The result shows that the effect of the refueling availability at origin and destination is significant.     

Analysis of a “cluster” strategy for introducing hydrogen vehicles in Southern California

The cost and logistics of building early hydrogen refueling infrastructure are key barriers to the commercialization of fuel cell vehicles. In this paper, we explore a “cluster strategy” for introducing hydrogen vehicles and refueling infrastructure in Southern California over the next decade, to satisfy California's Zero Emission Vehicle regulation. Clustering refers to coordinated introduction of hydrogen vehicles and refueling infrastructure in a few focused geographic areas such as smaller cities (e.g. Santa Monica, Irvine) within a larger region (e.g. Los Angeles Basin). We analyze several transition scenarios for introducing hundreds to tens of thousands of vehicles and 8–42 stations, considering:     

Comparative risk assessment of liquefied and gaseous hydrogen refueling stations

Several countries are incentivizing the use of hydrogen (H₂) fuel cell vehicles, thereby increasing the number of H₂ refueling stations (HRSs), particularly in urban areas with high population density and heavy traffic. Therefore, it is necessary to assess the risks of gaseous H₂ refueling stations (GHRSs) and liquefied H₂ refueling stations (LHRSs). This study aimed to perform a quantitative risk assessment (QRA) of GHRSs and LHRSs. A comparative study is performed to enhance the decision-making of engineers in setting safety goals and defining design options. A systematic QRA approach is proposed to estimate the likelihood and consequences of hazardous events occurring at HRSs. Consequence analysis results indicate that catastrophic ruptures of tube trailer and liquid hydrogen storage tanks are the worst accidents, as they cause fires and explosions. An assessment of individual and societal risks indicates that LHRSs present a lower hazard risk than GHRSs. However, both station types require additional safety barrier devices for risk reduction, such as detachable couplings, hydrogen detection sensors, and automatic and manual emergency shutdown systems, which are required for risk acceptance.     

Understanding attitudes of hydrogen fuel-cell vehicle adopters in Japan

As of January 2021, Japan had the world's largest hydrogen station network with merely 4600 hydrogen fuel-cell vehicles (HFCVs) on roads, as compared to the 9000 HFCVs in the US, with only one-third of the hydrogen refueling stations in Japan. To understand behavioral differences among Japanese adopters, we administered a survey, in cooperation with public and private sector stakeholders, involving 89 private HFCV adopters in the Aichi Prefectural region, which hosts the largest number of HFCVs and refueling stations in Japan. Results suggest that HFCV adopters have a higher socioeconomic status than non-adopters, are mostly male in their 50s and above, and have a higher interest in new vehicle fuel technology. HFCV adopters who leased and bought vehicles were similar in terms of socioeconomic status, with differences in attitudes toward governmental incentives. The lack of refueling stations and station business hours restrict HFCV adopters from continuing with this fuel technology.     

Developing an infrastructure for hydrogen vehicles: a Southern California case study

We have examined the technical feasibility and economics of developing a hydrogen vehicle refueling infrastructure for a specific area where zero emission vehicles are being considered, Southern California. Potential hydrogen demands for zero emission vehicles are estimated. We then assess in detail several near term possibilities for producing and delivering gaseous hydrogen transportation fuel including: (1) hydrogen produced from natural gas in a large, centralized steam reforming plant, and truck delivered as a liquid to refueling stations; (2) hydrogen produced in a large, centralized steam reforming plant, and delivered via small scale hydrogen gas pipeline to refueling stations; (3) by-product hydrogen from chemical industry sources; (4) hydrogen produced at the refueling station via small scale steam reforming of natural gas; and (5) hydrogen produced via small scale electrolysis at the refueling station. The capital cost of infrastructure and the delivered cost of hydrogen are estimated for each hydrogen supply option. Hydrogen is compared to other fuels for fuel cell vehicles (methanol, gasoline) in terms of vehicle cost, infrastructure cost and lifecycle cost of transportation. Finally, we discuss possible scenarios for introducing hydrogen as a fuel for fuel cell vehicles.     

Manufacturing competitiveness analysis for hydrogen refueling stations

Fuel cell electric vehicles (FCEVs) have now entered the market as zero-emission vehicles. Original equipment manufacturers such as Toyota, Honda, and Hyundai have released commercial cars in parallel with efforts focusing on the development of hydrogen refueling infrastructure to support new FCEV fleets. Persistent challenges for FCEVs include high initial vehicle cost and the availability of hydrogen stations to support FCEV fleets. This study sheds light on the factors that drive manufacturing competitiveness of the principal systems in hydrogen refueling stations, including compressors, storage tanks, precoolers, and dispensers. To explore major cost drivers and investigate possible cost reduction areas, bottom-up manufacturing cost models were developed for these systems. Results from these manufacturing cost models show there is substantial room for cost reductions through economies of scale, as fixed costs can be spread over more units. Results also show that purchasing larger quantities of commodity and purchased parts can drive significant cost reductions. Intuitively, these cost reductions will be reflected in lower hydrogen fuel prices. A simple cost analysis shows there is some room for cost reduction in the manufacturing cost of the hydrogen refueling station systems, which could reach 35% or more when achieving production rates of more than 100 units per year. We estimated the potential cost reduction in hydrogen compression, storage and dispensing as a result of capital cost reduction to reach 5% or more when hydrogen refueling station systems are produced at scale.     

Refueling hydrogen fuel cell vehicles with 68 proposed refueling stations in California: Measuring deviations from daily travel patterns

This paper examines the deviation of refueling a hydrogen fuel cell vehicle with limited opportunity provided by the 68 proposed stations in California. A refueling trip is inserted to reported travel patterns in early hydrogen adoption community clusters and the best and worst case insertions are analyzed. Based on these results, the 68 refueling stations provide an average of 2.5 and 9.6 min deviation for the best and the worst cases. These numbers are comparable to currently observed gasoline station deviation, and we conclude that these stations provide sufficient accessibility to residents in the target areas.     

A solution to renewable hydrogen economy for fuel cell buses – A case study for Zhangjiakou in North China

Fuel cell vehicles fueled with renewable hydrogen is recognized as a life-cycle carbon-free option for the transport sector, however, the profitability of the H₂ pathway becomes a key issue for the FCV commercialization. By analyzing the actual data from the Zhangjiakou fuel cell transit bus project, this research reveals it is economically feasible to commercialize FCV in areas with abundant renewable resources. Low electricity for water electrolysis, localization of H₂ supply, and curtailed end price of H₂ refueling effectively reduce the hydrogen production, delivery and refueling cost, and render a chance for the profitability of refueling stations. After the fulfillment of the intense deployment of both vehicles and hydrogen stations for the 2022 Winter Olympics, the H₂ pathway starts to make a profit thereafter. The practices in the Zhangjiakou FCB project offer a solution to the hydrogen economy, which helps to break the chicken-egg dilemma of vehicles and hydrogen infrastructure.     

Development of strategic hydrogen refueling station deployment plan for Korea

The Republic of Korea government has set yearly targets of hydrogen cars and buses and plans to install hydrogen refueling stations nationwide. This paper proposes a methodology for developing a strategic deployment plan with three mathematical models. For a given target, future refueling demand locations and amount from general road and expressway are systematically estimated. First, the required number of refueling stations to satisfy the target covering ratio of the total demand set by the government is determined by the Station number determination model. Next, the locations of the capacitated stations and the allocation of demand to the stations are determined by the second Max cover and the third p-median models. Since the max covering is more important than minimizing the travel time, the two models are used sequentially. The nationwide hydrogen station deployment plan for the years 2022–2040 obtained by the proposed methodology is reported.     

Improving hydrogen refueling stations to achieve minimum refueling costs for small bus fleets

Fuel cell vehicles using green hydrogen as fuel can contribute to the mitigation of climate change. The increasing utilization of those vehicles creates the need for cost efficient hydrogen refueling stations. This study investigates how to build the most cost efficient refueling stations to fuel small fleet sizes of 2, 4, 8, 16 and 32 fuel cell busses. A detailed physical model of a hydrogen refueling station was built to determine the necessary hydrogen storage size as well as energy demand for compression and precooling of hydrogen. These results are used to determine the refueling costs for different station configurations that vary the number of storage banks, their volume and compressor capacity.It was found that increasing the number of storage banks will decrease the necessary total station storage volume as well as energy demand for compression and precooling. However, the benefit of adding storage banks decreases with each additional bank. Hence the cost for piping and instrumentation to add banks starts to outweigh the benefits when too many banks are used. Investigating the influence of the compressor mass flow found that when fueling fleets of 2 or 4 busses the lowest cost can be reached by using a compressor with the minimal mass flow necessary to refill all storage banks within 24 h. For fleets of 8, 16 and 32 busses, using the compressor with the maximum investigated mass flow of 54 kg/h leads to the lowest costs.     

Proposed model of potential accident process at hydrogen refueling stations based on multi-level variable weight fuzzy Petri net

Hydrogen is becoming more popular as a fuel for vehicles. It is stored and dispensed at hydrogen refueling stations. Once the hydrogen in hydrogen refueling stations leaks, it easily forms a combustible cloud, and can explode by encountering a spark. It is therefore important for the safe and stable operation of hydrogen refueling stations to analyze the evolution of a leakage and explosion accident, clarify the causes and processes of the accident, and prevent the spread of risks. This paper proposes a model using multi-level variable weight fuzzy Petri net. On the basis of hierarchical consideration of the development of the accident, it adds a variable weight factor, which can quantify information in the development of the accident. According to the calculated results, the evolutionary path of risk and the most likely initial cause of the accident are deduced. Finally, taking the leakage and explosion accident of an urban hydrogen refueling station as an example, the usability and effectiveness of the model are verified.     

Multi-objective and multi-period hydrogen refueling station location problem

Creating a distribution network and establishing refueling stations arises as an important problem in order to meet the refueling needs of hydrogen fuel cell vehicles. In this study, a multi-objective and multi-period hydrogen refueling station location problem that can take into account long-term planning decisions is proposed. Firstly, single objective mathematical models are proposed for the problem by addressing the cost, risk and population convergence objectives. Afterwards, a goal programming model is proposed and the results that will arise when three objectives are taken into consideration at the same time are examined. A risk analysis approach applied for each location alternative is considered in order to handle risk concerns about the hydrogen refueling station settlement. A case study is conducted in Adana, one of the crowded cities in Turkey, to determine the long-term location network plan. Covered population, operational risk and earthquake risks are used as input of the risk analysis method. The case study results show that the goal programming model covers the area with 77 hydrogen refueling stations by different types and capacities during the years from 2020 to 2030. In addition, a computational study is carried out with different alternative scenarios (different number of consumption nodes and all parameters in the model). The computational study results show that the highest deviations from the optimal solution on the model are observed in the distances between consumption nodes and targeted service area parameters which affect about 50% of absolute deviations on average. According to results, the proposed approach selects the station location suitable for the expected changes over the years.     

Node-based vs. path-based location models for urban hydrogen refueling stations: Comparing convenience and coverage abilities

For optimizing locations of hydrogen refueling stations, two popular approaches represent fuel demands as either nodes or paths, which imply different refueling behavior and definitions of convenience. This paper compares path-based vs. node-based models from the perspective of minimizing total additional travel time and feasibly covering all demands with the same number of stations. For this comparison, two new station location models are introduced that extend the Flow Capturing Location Model (FCLM) and p-Median Problem (PMP) by consistently defining upper limits on vehicle driving range and maximum inconvenience on refueling trips. Results for an idealized metropolitan area and Orlando, Florida show that path-based refueling substantially reduces wasteful travel time for refueling and covers more demand feasibly and more equitably in most scenarios. Path-based models incorporate the fact that residents of a zone regularly interact with other zones; therefore, individual stations can cover flows originating both near and far from their locations. This study suggests that path-based approaches to planning hydrogen refueling infrastructure enable more people in more neighborhoods to refuel fuel-cell vehicles without wasting excessive time or running out of fuel.     

Determining the lowest-cost hydrogen delivery mode

Hydrogen delivery is a critical contributor to the cost, energy use and emissions associated with hydrogen pathways involving central plant production. The choice of the lowest-cost delivery mode (compressed gas trucks, cryogenic liquid trucks or gas pipelines) will depend upon specific geographic and market characteristics (e.g. city population and radius, population density, size and number of refueling stations and market penetration of fuel cell vehicles). We developed models to characterize delivery distances and to estimate costs, emissions and energy use from various parts of the delivery chain (e.g. compression or liquefaction, delivery and refueling stations). Results show that compressed gas truck delivery is ideal for small stations and very low demand, liquid delivery is ideal for long distance delivery and moderate demand and pipeline delivery is ideal for dense areas with large hydrogen demand.     

Addition of hydrogen refueling for fuel cell bus fleet to existing natural gas stations: A case study in Wuhan,China

Hydrogen refueling is an essential infrastructure for fuel cell vehicles, and currently, it appears to be a critical service needed to initiate the highly anticipated hydrogen economy in China. A practical selecting procedure of adding hydrogen refueling service to existing natural gas (NG) stations is proposed in this study. A case study in Wuhan, China, is established to assess the feasibility and future planning. The demand for hydrogen fuel and initial supply chain of hydrogen in Wuhan are estimated based on the deployment objective of fuel cell buses. The existing NG stations are evaluated based on 300 kg/day to determine whether they meet the hydrogen safety requirement using Google map or field investigation. The safety space requirement of the hydrogen refueling area on existing NG station is determined as 25.9 × 27.1 m². The optimal hydrogen refueling plan for fuel cell buses is calculated with multi‐objective analysis in economic, environmental, and safety aspects from the view of the hydrogen refueling supply chain. It is shown that adding hydrogen refueling stations to existing NG stations is feasible in technology, economics, regulation, and operation considerations. This study provides guidelines for building the hydrogen infrastructure for fuel cell buses at their early stage of commercial operation.     

Near-term location planning of hydrogen refueling stations in Yokohama City

Establishing hydrogen refueling stations is key to transition into a hydrogen economy. To achieve this, a near-term, city-level roll-out plan is required, as Japan is shifting from the demonstration to implementation stage of a hydrogen economy. The aim of this study was to devise a plan to identify near-term locations to build hydrogen refueling stations in Yokohama City, Japan. Our plan provides information on the potential location of hydrogen refueling stations for 2020–2030. We considered mobile and parallel-siting type refueling stations; the locations of these stations were determined by matching the supply and demand estimated from hybrid vehicle ownership data and the available space in existing gas stations based on a safety perspective. The results reaffirmed the importance of planning the locations of hydrogen refueling stations and highlighted the suitability of using mobile-type stations. This was based on the uncertainty in fuel demand for fuel cell vehicles during the implementation stage of the hydrogen economy.     

长三角地区加氢站发展现状、障碍分析及对策建议

目的  为促进我国实现碳达峰、碳中和目标,深入推进生产和消费革命,构建清洁低碳、安全高效的能源体系,发展氢能产业有着重要意义。加速发展加氢站是实现氢能源全链条的关键,是实现氢能产业健康、迅速发展的重要保障。由于长三角地区石化和化工企业氢能消费规模大,氢燃料电池汽车等发展迅速,促进加氢站发展及网络建设是氢能推广的重中之重。 方法  通过文献研究法、个案研究法、调查研究法、经济性测算等研究方法分析长三角地区加氢站建站审批流程、政策环境等现状,识别制约长三角地区加氢站建设发展的障碍。 结果  由于氢的能源属性缺乏法律支撑,建设标准缺乏指导性,多部门协作机制不健全等因素制约了加氢站的建设,阻碍了氢能产业的发展。 结论  应健全氢能有关法律法规,明确氢能“危化品”与“能源”的边界条件,完善加氢站建设标准及审批流程,集中力量攻关核心技术,增加财政补贴扶持力度,加速推广燃料电池汽车,促进氢能产业发展。