Microwave-hydrothermal synthesis of nano-sized Sn<Superscript>2+</Superscript>-doped BaTiO<Subscript>3</Subscript> powders and dielectric properties of corresponding ceramics obtained by spark plasma sintering method

Ternary oxides containing Sn²⁺ are rare and difficult to prepare using solid state reaction due to disproportionation of Sn²⁺ at high temperature. In this paper, nanoparticles of barium titanate doped with different amounts of Sn²⁺ consisting of single phase perovskite structure were successfully synthesized for the first time by using a microwave-assisted solvothermal reaction. The particle sizes were about 20–40 nm in diameter and increased with increasing the amount of doped tin. Solidified ceramic bodies were obtained using a spark plasma sintering method under argon atmosphere avoiding the disproportionation and oxidation of Sn²⁺ in the air. The grain size and dielectric constant of the sintered body decreased with increasing the amount of doped tin.     

Properties of neodymium-doped Ca<Subscript>0.15</Subscript>Sr<Subscript>1.85</Subscript>Bi<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>18</Subscript> ferroelectric ceramics

Bismuth-layered compound Ca_0.15Sr_1.85Bi_4−xNd_xTi₅O₁₈ (CSBNT, x = 0–0.25) ferroelectric ceramics samples were prepared by solid-state reaction method. The effects of Nd³⁺ doping on their ferroelectric and dielectric properties were investigated. The remnant polarization Pr of CSBNT ceramics increases at beginning then decreases with increasing of Nd³⁺ doping level, and a maximum Pr value of 9.6 μC/cm² at x = 0.05 was detected with a coercive field Ec = 80.2 kV/cm. Nd³⁺ dopant not only decreases the Curie temperature linearly, but also the dielectric constant (ε_r) and dielectric loss tangent (tan δ). The magnitudes of ε_r and tan δ at the frequency of 100 kHz are estimated to be 164 and 0.0083 at room temperature, respectively.     

Synthesis and luminescence properties of Eu<Superscript>2+</Superscript>-doped Li<Subscript>2</Subscript>SrSiO<Subscript>4</Subscript>

We have studied the luminescence spectra of Li₂Sr_{1 − x} Eu _x SiO₄ (x = 0.0001–0.01) solid solutions prepared by solid-state reactions and a sol-gel process in a reducing atmosphere. The spectra show a broad band in the range 500–700 nm, centered at 578 nm, which is due to the 4f ⁶5d → 4f ⁷ transition. The luminescence excitation spectrum shows, in addition to bands due to Eu²⁺ 4f ⁷ → 4f ⁶5d transitions, a strong band centered at 174 nm, attributable to absorption in the SiO₄⁴⁻ group.     

Synthesis and photoluminescence properties of LiEu(W,Mo)<Subscript>2</Subscript>O<Subscript>8</Subscript>:Bi<Superscript>3+</Superscript> red-emitting phosphor for white-LEDs

LiEu_1−x (W_2−y Mo _y )O₈:xBi³⁺ series red-emitting phosphors were synthesized by solid state reaction. The structure, morphology, and photoluminescent properties of phosphors were studied by X-ray powder diffraction, scanning electron microscopy, and photoluminescence spectrum, respectively. X-ray powder diffraction analysis showed that the as-obtained phosphors belong to the scheelite structure. The average particle size of the investigated phosphor was about 8 μm. The excitation spectrum exhibits a charge-transfer broad band along with some sharp peaks from the typical 4f–4f transitions of Eu³⁺. Under excitation of UV, near-UV, or blue light, these phosphors showed strong red emission at 615 nm due to ⁵D₀–⁷F₂ transition of Eu³⁺. The incorporation of Mo⁶⁺ into LiEuW₂O₈:Bi³⁺ could induce red-shift of the charge-transfer broad band and a remarkable increase of photoluminescence. The highest red-emission intensity was observed with LiEu_0.80Mo₂O₈:0.20Bi³⁺. Compared with the commercial red-emitting phosphor, Y₂O₂S:Eu³⁺, the emission intensity of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor is much stronger than that of Y₂O₂S:Eu³⁺ and its chromaticity coordinates are closer to the standard values than that of the commercial phosphor. The optical properties of LiEu_0.80Mo₂O₈:0.20Bi³⁺ phosphor make it attractive for the application in white-light-emitting diodes (LEDs), in particular for near-UV InGaN-based white-LEDs.     

Microstructure,phase transition and electrical properties of LiSbO<Subscript>3</Subscript>-doped (K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>)NbO<Subscript>3</Subscript> lead-free piezoelectric ceramics

Microstructure, phase transition and electrical properties of (1 − x)K_0.49Na_0.51NbO₃ − xLiSbO₃ (x = 0–0.08) lead-free piezoceramics prepared by the conventional solid-state sintering method were investigated with an emphasis on the effects of LiSbO₃ doping amount x. SEM results showed that the ceramic became denser by increasing LiSbO₃ doping amount x. Being indexed by XRD profiles, the ceramics changed from an orthorhombic perovskite structure to a tetragonal one across a composition region of 0.04 ≤ x≤0.05. The sample of LiSbO₃ doping amount x = 0.05 in tetragonal side of the region had the maximum values of piezoelectric constant (d ₃₃ = 256 pC/N) and planar electromechanical coupling coefficient (k _p = 42.7%). Meanwhile, this ceramic sample showed other good properties such as ε _r = 1,463, tgδ = 0.036, Q _m = 48, P _r = 19.8 μC/cm², E _c = 1.9 kV/mm and T _c = 340 °C, which indicated it was a promising lead-free piezoelectric material for ultrasonic transducer applications.     

Luminescence properties and electronic structure of Sm<Superscript>3+</Superscript>-doped YAl<Subscript>3</Subscript>B<Subscript>4</Subscript>O<Subscript>12</Subscript>

The luminescence properties of Sm³⁺ ions in YAl₃B₄O₁₂ were studied upon synchrotron excitation in the 3.8–11 eV region. In addition to the 4f → 4f excitation bands, the excitation spectra of the Sm³⁺ emission contain broad bands at 6.1 and ~7.0 eV. These bands are attributed to charge transfer transition in Sm³⁺–O²⁻ complexes and 4f → 5d transition of Sm³⁺ ions, respectively. The optical absorption edge of YAl₃B₄O₁₂ was determined at 7.3 eV. A comparison with the results of electronic structure calculations on YAl₃B₄O₁₂ is also made.     

Enhanced Superconducting Properties of Air-Processed GdBa<Subscript>2</Subscript>Cu<Subscript>3</Subscript>O<Subscript>7-δ</Subscript> Single Domains with BaCO<Subscript>3</Subscript>/BaCuO<Subscript>2−<Emphasis Type="Italic">x</Emphasis></Subscript> Addition

Single domain GdBa₂Cu_7-δ (Gd123) bulk superconductors were fabricated in air by top-seeding melt-texture growth. Performance of the air-processed Gd123 was successfully enhanced by addition of both BaCO₃ and BaCuO_2−x , which suppress the formation of Gd_1+x Ba_2−x Cu₃O_7-δ solid solutions. The optimum doping amount ranges from 0.05 to 0.15, M BaCO₃ and 0.05 to 0.1, M BaCuO_2−x per molar Gd123. The distribution of the second phase particles was observed by scanning electron microscopy. A narrow band formed by Gd₂BaCuO₅ particle concentration appeared around the seeding zone in both a–b plane and c-growth sector in Gd123 single grain. Trapped magnetic field density reached 0.67, T for sample with 24 mm in diameter and 8, mm in thickness and a high critical current density J _c up to 91,200, A/cm² was achieved at 77, K under self-field.     

Effect of Pr<Superscript>3+</Superscript> on the stokes luminescence of YPO<Subscript>4</Subscript>:Nd<Superscript>3+</Superscript> under IR excitation

We have identified general relationships between the spectral and kinetic properties of the IR Stokes luminescence bands of Y_{1 − x − y} Nd _x Pr _y PO₄ solid solutions in the spectral range 0.86–1.40 μm under 0.810-μm laser excitation. The results have been used to formulate technical requirements for the purity of rare-earth oxides for the fabrication of efficient YPO₄:Nd³⁺ IR phosphors and to develop a fast YPO₄:Nd³⁺, Pr³⁺ IR phosphor that allows the decay time of the Nd³⁺ IR Stokes luminescence bands in the range 0.86–1.40 μm to be tuned from 50 to 170 μs by varying the ratio of the Nd³⁺ and Pr³⁺ concentrations.     

Synthesis,photoluminescence and mechanoluminescence properties of Eu<Superscript>3+</Superscript> ions activated Ca<Subscript>2</Subscript>Gd<Subscript>2</Subscript>W<Subscript>3</Subscript>O<Subscript>14</Subscript> phosphors

A new series of Eu³⁺ ions-activated calcium gadolinium tungstate [Ca₂Gd₂W₃O₁₄] phosphors were synthesized by conventional solid-state reaction method. The X-ray diffraction patterns of the powder samples indicate that the Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors are of tetragonal structure. The prepared phosphors were well characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL), and mechanoluminescence (ML) spectra. PL spectra of Eu³⁺: Ca₂Gd₂W₃O₁₄ powder phosphors have shown strong red emission at 615 nm (⁵D₀ → ⁷F₂) with an excitation wavelength λ _exci = 392 nm (⁷F₀ → ⁵L₆). The energy transfer from tungstate groups to europium ions has also reported. Mechanoluminescence studies of Eu³⁺: Ca₂Gd₂W₃O₁₄ phosphors have also been explained systematically.     

Synthesis and sintering of nano-sized BaSnO<Subscript>3</Subscript> powders containing BaGeO<Subscript>3</Subscript>

The formation of solid solutions of the type [Ba(HOC₂H₄OH)₄][Sn_1−x Ge _x (OC₂H₄O)₃] as BaSn_1−x /Ge _x O₃ precursor and the phase evolution during its thermal decomposition are described in this paper. The 1,2-ethanediolato complexes can be decomposed to nano-sized BaSn_1−x /Ge _x O₃ preceramic powders. Samples with x = 0.05 consist of only a Ba(Sn,Ge)O₃ phase, whereas powders with x = 0.15 and 0.25 show diffraction patterns of both the Ba(Sn,Ge)O₃ and BaGeO₃ phase. The sintering behaviour was investigated on powders with a BaGeO₃ content of 5 and 15 mol%. These powders show a specific surface area of 15.4–15.9 m²/g and were obtained from calcination above 800 °C. The addition of BaGeO₃ reduced the sintering temperature of the ceramics drastically. BaSn_0.95Ge_0.05O₃ ceramics with a relative density of at least 90% can be obtained by sintering at 1150 °C for 1 h. The ceramic bodies reveal a fine microstructure with cubical-shaped grains between 0.25 and 0.6 μm. For dense ceramics, the sintering temperature could be reduced down to 1090 °C, when the soaking time was extended up to 10 h.     

Synthesis and photoluminescence properties of Eu<Superscript>3+</Superscript>-activated SrZnO<Subscript>2</Subscript>

Synthesis, X-ray diffraction, and photoluminescence (PL) investigations of SrZnO₂ doped with Eu³⁺ were carried out in order to characterize the material. The emission spectra showed a broad band emission at 525 nm attributed to oxygen defect centers in the host matrix, along with peaks corresponding to the ⁵D₀ → ⁷F _j (j = 1, 2) transitions of Eu ion under 250 nm excitation. PL decay time studies were done to confirm these investigations. Time-resolved emission spectrometric (TRES) study was carried out to extract the emission spectra of the Eu ion which was buried under the broad band emission. After giving suitable delay times and by choosing a proper time gate, transitions due to ⁵D₀ → ⁷F _j (j = 0, 1, 2, 3, and 4) could be observed. Judd–Ofelt intensity parameters and other radiative properties for the system were evaluated from this emission spectrum and decay time data by adopting standard procedure. The color coordinates of the system were also evaluated and plotted on a standard CIE index diagram. The observations showed that the SrZnO₂:Eu³⁺material has near white light emission (also considering the emission from host) whereas, the extracted emission spectrum due to only Eu ions has a near red emission.     

Luminescence properties of monodispersed spherical BaWO<Subscript>4</Subscript>:Eu<Superscript>3+</Superscript> microphosphors for white light-emitting diodes

Monodispersed spheres (1–4 μm in diameter) of BaWO₄:Eu³⁺ (hereafter BWO:Eu) red-phosphor exhibiting intense emission at 615 nm were synthesized via a mild hydrothermal method. X-ray diffraction, scanning electron microscope, photoluminescence excitation and emission spectra, and decay curve were used to characterize the properties of BWO:Eu phosphors. An intense red emission was obtained by exciting either into the ⁵L₆ state with 394 nm or the ⁵D₂ state with 465 nm, that correspond to two popular emission lines from near-UV and blue LED chips, respectively. The values of Ω _2,4 experimental intensity parameters (13.8 × 10⁻²⁰ and 8.2 × 10⁻²⁰ cm²) are determined. The high-emission quantum efficiency of the BWO:Eu phosphor suggests this material could be promising red phosphors for generating white light in phosphor-converted white light-emitting diodes.     

Synthesis and properties of AgTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-based NASICON-type phosphates doped with Nb<Superscript>5+</Superscript>, Zr<Superscript>4+</Superscript>, and Ga<Superscript>3+</Superscript>

We have synthesized materials based on a silver titanium phosphate with partial substitution of tri-, tetra-, or pentavalent cations for titanium: Ag_1±x Ti_2−x M _x (PO₄)₃ (M = Nb⁵⁺, Ga³⁺) and AgTi_2−x Zr _x (PO₄)₃. The materials have been characterized by X-ray diffraction and impedance spectroscopy and have been shown to have small thermal expansion coefficients. Their ionic conductivity has been determined. Silver ions in these materials are difficult to replace with protons.     

Combusion synthesis,structural and photo-physical characteristics of Eu<Superscript>2+</Superscript> and Dy<Superscript>3+</Superscript> co-doped SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> phosphor nanopowders

In this research, we reported the synthesis of Eu²⁺ and Dy³⁺ co-doped SrAl₂O₄ phosphor nanopowders with high brightness and long afterglow by urea-nitrate solution combustion synthesis (SCS) at 600 °C, followed by heating the resultant combustion ash at 1,200 °C in a weak reductive atmosphere (5% H₂ + 95% N₂). The broad-band UV-excited luminescence of the SrAl₂O₄: Eu²⁺, Dy³⁺ nanopowders was observed at λ _max = 517 nm due to transitions from the 4f⁶5d¹ to the 4f⁷ configuration of the emission center (Eu²⁺ ions). The excitation spectra consist of 240- and 254 nm broad peaks. Finally, it was found that the optimum ratio of urea is 2.5 times higher than theoretical quantities for the best emission condition of SrAl₂O₄: Eu²⁺, Dy³⁺ phosphor nanopowders.     

Synthesis,structural, photoluminescence and mechanoluminescence properties of Tb<Superscript>3+</Superscript>: Ca<Subscript>2</Subscript>Gd<Subscript>2</Subscript>W<Subscript>3</Subscript>O<Subscript>14</Subscript> novel green nanophosphors

Novel green nanophosphors Ca₂Gd₂W₃O₁₄: Tb³⁺ were synthesized by solid state reaction method. From the X-ray diffraction profiles it is observed that Tb³⁺: Ca₂Gd₂W₃O₁₄ phosphors were crystallized in the form of tetragonal structure. The scanning electron microscopy (SEM) image shows that the particle size is at around 300 nm. In addition to these the prepared powder phosphors were also examined by the energy dispersive X-ray analysis (EDAX), Fourier transform infrared spectroscopy (FTIR), photoluminescence (PL) and mechanoluminescence (ML) spectra. Emission spectra of Tb³⁺: Ca₂Gd₂W₃O₁₄ nanophosphors have shown bright green emission at 545 nm (⁵D₄ → ⁷F₅) with an excitation wavelength λ_exci = 374 nm (⁷F₆ → ⁵G₆). ML spectra shows the radiation effect on the Ca₂Gd₂W₃O₁₄: Tb³⁺ nanophosphors and from that it was observed that these phosphors are very less sensitive for lower exposure.     

Phase transition and electrical properties of LiNbO<Subscript>3</Subscript>-modified K<Subscript>0.49</Subscript>Na<Subscript>0.51</Subscript>NbO<Subscript>3</Subscript> lead-free piezoceramics

Lead-free (1-x)K_0.49Na_0.51NbO₃-xLiNbO₃ (KNN-LN, x = 0 ~ 0.08) piezoelectric ceramics were prepared by the conventional solid-state sintering method. The effects of LiNbO₃ doping amount x on the phase transition behavior and the electrical properties of KNN-LN ceramics were investigated. By increasing LiNbO₃ doping amount x, the orthorhombic-tetragonal polymorphic phase transition (PPT) temperature (T _o–t) of KNN-LN ceramics shifted downwards, however, the Curie temperature (T _c) slightly moved upwards. The room temperature phase structure thus changed from orthorhombic to tetragonal across the compositions with 0.05 ≤ x ≤ 0.06, named as PPT region. The composition with x = 0.06 in the tetragonal side of PPT region exhibited optimized electrical properties of d ₃₃ = 246pC/N, k _p = 41.6%, ε _r = 679, tgδ = 0.028, and Q _m = 52. In addition to its very high T _c = 467 °C, this ceramic can be an excellent candidate for replacing the lead-based piezoceramics in high temperature applications.     

Large enhancement of upconversion luminescence in Er<Superscript>3+</Superscript>/In<Superscript>3+</Superscript>:Ba<Subscript>0.85</Subscript>Ca<Subscript>0.15</Subscript>TiO<Subscript>3</Subscript> lead-free piezoelectric ceramics

A series of In³⁺-doped Ba_0.85Ca_0.15TiO₃:0.75%Er³⁺/xIn³⁺ (BCT:Er/xIn) lead-free piezoelectric ceramics with excellent upconversion luminescence were synthesized by the solid state reaction method. The effects of In³⁺ content on the crystal structure, ferroelectric, dielectric, piezoelectric, and upconversion luminescence properties were systematically studied. Under 980 nm excitation, a giant enhancement of the green emission (550 nm) by 10 times is achieved upon 2.5% mol In³⁺ doping, which is rarely observed in rare-earth ions-doped perovskite ferroelectric materials. The ultraviolet-visible-near infrared absorption measurements show that the In³⁺ doping may improve the dissolution of Er³⁺ ions and modify the isolate-/clustered-Er³⁺ ratio for x?≤?2.5%, resulting in the enhancement of the absorption cross-section, thereby contributing to the enhancement of green luminescence. Unfortunately, the In³⁺ doping suppresses the ferroelectric and piezoelectric properties of the BCT:Er/xIn ceramics. This problem can be resolved by adding a small amount (1 mol%) of Yb³⁺ to the BCT:Er/xIn ceramics to restore their good ferroelectric and piezoelectric properties. Such In³⁺ and rare-earth ions co-doped ceramics with greatly enhanced upconversion luminescence and good ferroelectricity and piezoelectricity may have potential applications in electro-optical devices.     

Optical properties of Eu<Superscript>3+</Superscript> activated SrLa<Subscript>2</Subscript>O<Subscript>4</Subscript> red-emitting phosphors for WLED applications

The SrLa_2?xO₄:xEu³⁺ phosphors are synthesized through high-temperature solid-state reaction method at 1473 K with various doping concentration. Their phase structures, absorption spectra, and luminescence properties are investigated by X-ray diffraction (XRD), UV–Vis spectrophotometer and photoluminescence spectrometry. The intense absorption of SrLa_2?xO₄:xEu³⁺ phosphors have occurred around 400 nm. The prominent luminescence spectra of the prepared phosphors exhibited bright red emission at 626 nm. The doping concentration 0.12 mol% of Eu³⁺ is shown to be optimal for prominent red emission and chromaticity coordinates are x?=?0.692, y?=?0.3072. Considering the high colour purity and appropriate emission intensity of Eu³⁺ doped SrLa₂O₄ can be used as red phosphors for white light emitting diodes (WLEDs).     

Ultraviolet upconversion luminescence in Y<Subscript>2</Subscript>O<Subscript>3</Subscript>:Yb<Superscript>3+</Superscript>,Tm<Superscript>3+</Superscript> nanocrystals and its application in photocatalysis

Infrared-to-ultraviolet upconversion luminescence agent Y₂O₃:Yb³⁺,Tm³⁺ was prepared by a combustion method using citrate as a fuel/reductant. The prepared sample was characterized by X-ray diffraction, SEM, and fluorescence spectrophotometer. Two unusual ¹I₆ → ³H₆ (~297 nm) and ¹D₂ → ³H₆ (~363 nm) emissions from Tm³⁺ ions were observed at room temperature under 980-nm laser excitation. The change of upconversion emission intensity depending on the Yb³⁺ concentrations was discussed. The results showed that modest Yb³⁺ doping could make the upconversion emission of Tm³⁺ intense, and high Yb³⁺ concentrations might lead to fluorescence quenching. Moreover, the influence of ultraviolet upconversion luminescence on the photodegradation of methyl orange aqueous solution under solar light irradiation in the presence of TiO₂ catalyst doped with Y₂O₃:Yb³⁺,Tm³⁺ was also investigated. It was concluded from the experiment of this study that TiO₂/Y₂O₃:Yb³⁺,Tm³⁺ composite had higher photocatalytic activity than pure TiO₂ under solar light. This study would make TiO₂ utilize sunlight more efficiently and accelerate the practical application of photocatalytic technology in water treatment region.     

Study of structure and properties of ZnO–Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–P<Subscript>2</Subscript>O<Subscript>5</Subscript> glasses

Glasses of the ternary system ZnO–Bi₂O₃–P₂O₅ were prepared and studied in two compositional series 50ZnO–xBi₂O₃–(50 − x)P₂O₅ and (50 − y)ZnO–yBi₂O₃–50P₂O₅. Two distinct glass-forming regions were found in the 50ZnO–xBi₂O₃–(50 − x)P₂O₅ glass series with x = 0–10 and 20–35 mol.% Bi₂O₃. All prepared Bi₂O₃-containing glasses reveal a high chemical durability. Small additions of Bi₂O₃ (∼5 mol.%) improve thermal stability of glasses. All glasses crystallize on heating within the temperature range of 505–583 °C. Structural studies by Raman and ³¹P MAS NMR spectroscopies showed the rapid depolymerisation of phosphate chains within the first region with x = 0–15 and the presence of isolated Q⁰ phosphate units within the second region with x = 20–35. Raman studies showed that bismuth is incorporated in the glass structure in BiO₆ units and their vibrational bands were observed within the spectral region of 350–700 cm⁻¹. The evolution of properties and the spectroscopic data are both in accordance with a network former effect of Bi₂O₃.