Studies concerning charged nickel hydroxide electrodes. VII. Influence of alkali concentration on anodic peak positions

After repetitive potential cycling employing a high positive potential limit (>700 mV wrt Hg/HgO/ KOH) three anodic and one cathodic peak can be observed using aβ-Ni(OH)₂ starting material. Anodic peaks found at 425, 470 and 555 mV in 5 mol dm^?3 KOH shift to less positive potentials as the alkali concentration is increased appearing at 365, 410 and 455 mV respectively in 12.5 mol dm^?3 KOH. Four anodic processes involving various pairs of coexisting phases within both theβ andα-/γ-phase system can be identified as summarized below in order of increasing positive potential: Peak A $$\begin{gathered} Peak A{\text{ }}U_\alpha ^A \to {\text{ }}V_\gamma ^A \hfill \\ Peak B{\text{ }}U_\beta ^B \to {\text{ }}V_\beta ^B \hfill \\ {\text{ }}\mathop C\limits^ + {\text{ }}U_\alpha ^C \to {\text{ }}V_\gamma ^C \hfill \\ Peak E{\text{ }}V_\beta ^B \to {\text{ }}V_\gamma ^E \hfill \\ \end{gathered} $$ Observed shifts in anodic and cathodic peak potentials are consistent with the known influence of alkali and water activity on the reversible potentials for the above processes.     

Solid state ionics—the electrochemical analog memory cell with solid electrolyte

A new type analog memory cell with variable output voltage has been proposed and its performance examined. The cell construction is $$\begin{gathered} {\text{Ag|RbAg}}_{\text{4}} {\text{I}}_{\text{5}} {\text{|(Ag}}_{\text{2}} {\text{Se)}}_{{\text{0}} \cdot {\text{925}}} {\text{(Ag}}_{\text{3}} {\text{PO}}_{\text{4}} {\text{)}}_{{\text{0}} \cdot {\text{075}}} {\text{|RbAg}}_{\text{4}} {\text{I}}_{\text{5}} {\text{|Ag}} \hfill \\ {\text{ }} \uparrow \hfill \\ {\text{ Pt}} \hfill \\ \end{gathered} $$ in which (Ag₂Se)_0.925(Ag₃PO₄)_0.075 is a mixed conductor exhibiting high ionic and electronic conductivity at room temperature. The potential difference between the silver electrode and the platinum electrode depends on the silver activity in the mixed conductor, and it is changed by passing the current between one silver electrode and the platinum electrode. The output voltage of the cell is changed in the range of 150 to 0 mV. At open circuit, the memorized cell voltage decreased by only 1% over several hours.     

The mechanism of manganese electrodeposition

The mechanism of manganese electrodeposition from a sulphate bath on to a stainless-steel substrate has been studied by using current efficiency data to resolve the totali-E curves. A simple, two-step electron transfer mechanism: $${\text{Mn}}^{{\text{ + + }}} + {\text{e}}\xrightarrow{{{\text{r}}{\text{.d}}{\text{.s}}}}{\text{Mn}}^{\text{ + }} $$ $${\text{Mn}}^{\text{ + }} + {\text{e}} \to {\text{Mn}}$$ is proposed to explain the following experimentally obtained parameters: cathodic and anodic transfer coefficients, reaction order and stoichiometric number. The mechanism also explains the effect of pH oni _o,Mn and on the corrosion currents.     

Positive polyacetylene electrodes in aqueous electrolytes

Polyacetylene films, contacted with platinum mesh, have been polarized anodically in aqueous H₂SO₄, HClO₄, HBF₄ and H₂F₂ of medium concentrations (30–70 wt%). Two oxidation peaks are observed, the equivalents of which are 1 $${\text{(1) 0}}{\text{.045 F mol}}^{ - {\text{1}}} {\text{ CH (2) 0}}{\text{.23 F mol}}^{ - {\text{1}}} {\text{ CH}}$$ The potential of the Process 1 decreases linearly with increasing acid concentration by 20–40 mV mol^?1 dm^?3, while the potential of Peak 2 exhibits normal Nernst behaviour (about + 60 mV decade^?1. Process 1 is partially reversible, while Process 2 is totally irreversible. From these findings for Process 1 we conclude the reversible insertion of anions into the polyacetylene host lattice, which is primarily oxidized to the polyradical cation, with the co-insertion of acid molecules HA to yield the insertion compound [(CH)⁺·yA^?·vyHA] _x y?4.5% andv=1.5 for H₂SO₄ and HClO₄. In the course of Process 2, the polymer is irreversibly oxidized according to $$( - ^ \cdot {\text{CH}} \cdot \cdot \cdot \cdot \cdot \cdot \cdot \cdot ^ \oplus {\text{ CH}} - )_{x/2} + 2{\text{H}}_{\text{2}} {\text{O}} \to ( - \mathop {\text{C}}\limits_{\mathop \parallel \limits_{\text{O}} } \cdot \cdot \cdot \cdot \cdot \cdot \cdot \cdot \mathop {\text{C}}\limits_{\mathop \parallel \limits_{\text{O}} } - )_{x/2} + 6{\text{H}}^{\text{ + }} + 5e^ - $$ As this process occurs to some extent even in the potential region of Process 1, a continuous degradation of the host lattice occurs upon cycling.     

Electrical conductivity of low melting baths for aluminium electrolysis: the system Na3AlF6-Li3AlF6- AlF3 and the influence of additions of Al2O3, CaF2, and MgF2

The electrical conductivity was investigated for a section of the molten ternary mixture Na₃AlF₆-Li₃AlF₆-AlF₃ with molar ratio n(Li₃AlF₆):n(AlF₃) = 1 : 2. The conductivity of this system can be described by the following equation: where (i) represent the mole fractions of the additions. The influence of additions of CaF₂, MgF₂ and/or Al₂O₃ on the electrical conductivity of the binary system Na₃AlF₆-Li₃AlF₆ and the ternary system Na₃AlF₆-Li₃AlF₆-AlF₃ was also studied.     

The Effect of CO2 and H2O on the Kinetics of NO Reduction by CH4 Over Sr-Promoted La2O3

The influence of CO₂ and H₂O on the activity of 4% Sr-La₂O₃ mimics that observed with pure La₂O₃, and a reversible inhibition of the rate is observed. CO₂ causes a greater effect, with decreases in rate of about 65% with O₂ present and 90% in its absence, while with H₂O in the feed, the rate decreased around 35-40% with O₂ present or absent. The influence of these two reaction products on kinetic behavior can be described by assuming competitive adsorption on the surface, incorporating adsorbed CO₂ and H₂O in the site balance, and using rate expressions previously proposed for this reaction over Sr-promoted La₂O₃. In the absence of O₂, the rate expression is $$r_{N_2 } = \frac{{k'P_{{\text{NO}}} P_{{\text{CH}}_{\text{4}} } }}{{{\text{(1 + }}K_{{\text{NO}}} P_{{\text{NO}}} {\text{ + }}K_{{\text{CH}}_{\text{4}} } P_{{\text{CH}}_{\text{4}} } {\text{ + }}K_{{\text{CO}}_{\text{2}} } P_{{\text{CO}}_{\text{2}} } {\text{ + }}K_{{\text{H}}_{\text{2}} {\text{O}}} P_{{\text{H}}_{\text{2}} {\text{O}}} {\text{)}}^{\text{2}} }},$$ which yields a good fit to the experimental data and gives optimized equilibrium adsorption constants that demonstrate thermodynamic consistency. With O₂ in the feed, nondifferential changes in reactant concentrations through the reactor bed were accounted for by assuming integral reactor behavior and simultaneously considering both CH₄ combustion and CH₄ reduction of NO, which provided the following rate law for total CH₄ disappearance: $$(r_{{\text{CH}}_{\text{4}} } )_{\text{T}} = \frac{{k'_{{\text{com}}} P_{{\text{CH}}_{\text{4}} } P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} + k'_{{\text{NO}}} P_{{\text{NO}}} P_{{\text{CH}}_{\text{4}} } P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} }}{{{\text{(1 + }}K_{{\text{NO}}} P_{{\text{NO}}} {\text{ + }}K_{{\text{CH}}_{\text{4}} } P_{{\text{CH}}_{\text{4}} } {\text{ + }}K_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} P_{{\text{O}}_{\text{2}} }^{{\text{0}}{\text{.5}}} {\text{ + }}K_{{\text{CO}}_{\text{2}} } P_{{\text{CO}}_{\text{2}} } {\text{ + }}K_{{\text{H}}_{\text{2}} {\text{O}}} P_{{\text{H}}_{\text{2}} {\text{O}}} {\text{)}}^{\text{2}} }}.$$ The second term of this expression represents N₂ formation, and it again fit the experimental data well. The fitting constants in the denominator, which correspond to equilibrium adsorption constants, were not only thermodynamically consistent but also provided entropies and enthalpies of adsorption that were similar to values obtained with other La₂O₃-based catalysts. Apparent activation energies typically ranged from 23 to 28 kcal/mol with O₂ absent and 31-36 kcal/mol with O₂ in the feed. With CO₂ in the feed, but no O₂, the activation energy for the formation of a methyl group via interaction of CH₄ with adsorbed NO was determined to be 35 kcal/mol.     

[CuL(H2O)2]{[CuL][Fe(CN)6]}2·2H2O (L=3,10-Bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane): A Novel Three-Dimensional Coordination Polymer via H-Bonded Linkages of One-Dimensional Zigzag Chain

A complex with the formula [CuL(H₂O)₂]{[CuL][Fe(CN)₆]}₂·2H₂O, where L=3,10-bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane, has been synthesized and crystallographically characterized. The structure is composed of a one-dimensional zigzag chain of $\left\{ {[{\text{CuL}}][{\text{Fe(CN)}}_{\text{6}} ]} \right\}_2^{2 - } $ units, and [CuL(H₂O)₂]²⁺ units. The one-dimensional zigzag chain extents through ${\text{Cu}}{\kern 1pt} - {\kern 1pt} {\text{CN}} - {\kern 1pt} {\text{Fe}}{\kern 1pt} - {\kern 1pt} {\text{CN}} - {\kern 1pt} {\text{Cu}}$ linkages. The adjacent two polymer chains are linked by the ${\text{O}}{\kern 1pt} - {\kern 1pt} {\text{H}}{\kern 1pt} \cdot \cdot \cdot {\kern 1pt} {\text{N}}{\kern 1pt} \equiv {\kern 1pt} {\text{C}}{\kern 1pt} - $ hydrogen bonding between [CuL(H₂O)₂]²⁺ and [Fe(CN)₆]^3?, forming a 3D supramolecular structure with inner hydrophilic channels. Magnetic susceptibility measurements show no exchange interaction between the Cu(II) and Fe(III) ions due to the longer ${\text{Cu}}{\kern 1pt} - {\kern 1pt} {\text{N}}$ (axial) bond length.     

Conduction in Bi2O3-based oxide ion conductor under low oxygen pressure. II. Determination of the partial electronic conductivity

In order to investigate the partial electronic conduction in the high oxide ion conductor of the system Bi₂O₃-Y₂O₃ under low oxygen pressure, e.m.f. and polarization methods were employed. Although the electrolyte was decomposed when the \(P_{{\text{O}}_{\text{2}} }\) was lower than the equilibrium \(P_{{\text{O}}_{\text{2}} }\) of Bi, Bi₂O₃ mixture at each temperature, the ionic transport number was found to be close to unity above that \(P_{{\text{O}}_{\text{2}} }\) . The hole conductivity (σ _p) and the electron conductivity (σ _p) could be expressed as follows, $$\begin{gathered} \sigma _p \Omega cm = 5 \cdot 0 \times 10^2 \left( {P_{O_2 } atm^{ - 1} } \right)^{{1 \mathord{\left/ {\vphantom {1 4}} \right. \kern-\nulldelimiterspace} 4}} \exp \left[ { - 106 kJ\left( {RT mol} \right)^{ - 1} } \right] \hfill \\ \sigma _p \Omega cm = 3 \cdot 4 \times 10^5 \left( {P_{O_2 } atm^{ - 1} } \right)^{ - {1 \mathord{\left/ {\vphantom {1 4}} \right. \kern-\nulldelimiterspace} 4}} \exp \left[ { - 213 kJ\left( {RT mol} \right)^{ - 1} } \right] \hfill \\ \end{gathered} $$ These values were much lower than the oxide ion conductivity under ordinary oxygen pressure.     

A polarographic investigation of the kinetics of epoxidation of unsaturated fatty acid esters

Summary A polarographic technique which uses a nonaqueous electrolytic solution consisting of 0.25M ammonium acetate in glacial acetic acid is a suitable medium for the investigation of the kinetics of fatty acid ester epoxidations. From the polarographic data the specific reaction rate constants for the perlauric acid epoxidation of vinyl laurate, methyl oleate, and vinyl oleate in benzene at 25°C. were found to be 12, 232, and 270 × 10⁻³ l./mole⁻¹ min⁻¹. The Arrhenius equation for the epoxidations of methyl oleate and vinyl oleate by perlauric acid can be expressed as Presented at the Fall Meeting of the American Oil Chemists' Society, Philadelphia, Pa., Oct. 10, 1955. Senior Fellow, National Renderers Association. Presently member of staff, Eastern Regional Research Laboratory. A laboratory of the Eastern Utilization Research Branch, Agricultural Research Service. United States Department of Agriculture.     

[CuL(H2O)2]{[CuL][Fe(CN)6]}2·2H2O (L=3,10-Bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane): A Novel Three-Dimensional Coordination Polymer via H-Bonded Linkages of One-Dimensional Zigzag Chain

A complex with the formula [CuL(H₂O)₂]{[CuL][Fe(CN)₆]}₂·2H₂O, where L=3,10-bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane, has been synthesized and crystallographically characterized. The structure is composed of a one-dimensional zigzag chain of units, and [CuL(H₂O)₂]²⁺ units. The one-dimensional zigzag chain extents through linkages. The adjacent two polymer chains are linked by the hydrogen bonding between [CuL(H₂O)₂]²⁺ and [Fe(CN)₆]^3–, forming a 3D supramolecular structure with inner hydrophilic channels. Magnetic susceptibility measurements show no exchange interaction between the Cu(II) and Fe(III) ions due to the longer (axial) bond length.     

Effect of PVC on low-polar isobutylene polymerization in the presence of BCl3

Summary The isobutylene polymerizations in the presence of BCl₃ were carried out in dichloromethane ([M]=7 mol/l) at-20°C in the presence and absence of PVC. The products of polymerizations in the absence of PVC are oligoisobutylenes with a narrow molecular weight distribution ; their structure was analyzed by ¹H-NMR spectroscopy. In addition to the signals assigned to known unsaturated terminal structures [ 4.62 and 4.82-CH₂C(CH₃)=CH₂, 5.12-CH=C(CH₃)₂], a new intense signal was found at 5.09 ppm and assigned to the structure-CH=C(CH₃)CH₂CH₃. A mixture of isobutylene homopolymers and PVC grafted with isobutylene (approx. 9.5% wt. isobutylene grafted) is formed in the presence of PVC.     

Living cationic polymerization of styrene by the methanesulfonic acid/tin tetrachloride initiating system in the presence of tetra-n-butylammonium chloride

Summary Living cationic polymerization of styrene was achieved by the methanesulfonic acid/tin tetrachloride (CH₃SO₃H/SnCl₄) initiating system in the presence of tetra-n-butylammonium chloride (nBu₄NCl) in methylene chloride solvent below 0 °C. The typical reagent concentrations of this initiating system were as follows: CH₃SO₃H/SnCl₄/nBu₄NCl=20/100/40 mM; [Styrene]₀=1.0 M. The number-average molecular weights of the product polymers increased in direct proportion to monomer conversion, and their molecular weight distributions (MWDs) were fairly narrow throughout the reaction. On addition of a fresh feed of styrene at the end of the polymerization, the added feed was smoothly polymerized at the same rate as in the first stage; the polymer molecular weight further increased in direct proportion to monomer conversion; and their molecular weight distributions stayed narrow . On the other hand, in the absence of nBu₄NCl, the polymerization initiated by CH₃SO₃H/SnCl₄ in CH₂Cl₂ at -15 °C led to non-living polymers with a broad molecular weight distribution. This indicates that nBu₄NCl is essential to this living system.     

Study of mass transfer in a vertically moving particle bed electrode

A study was made of the influence of process parameters on the mass-transfer coefficient in a flow-through cell with a cascade of rotating drums partially filled with conductive particles (called the vertically moving particle bed). Copper deposition from an acidic sodium sulphate solution was used as the model reaction. To evaluate the experimental data a macrohomogeneous mathematical model of potential and current density distribution inside the cell was developed. The electrolyte flow distribution between the empty space above the particle bed and through the bed was evaluated. On the basis of these results the following correlation is proposed:

A simple and efficient oxidation system for the oxidation of alcohols utilizing Oxone® as oxidant catalyzed by polymer-supported 2-iodobenzamide

$\begin{array}{l}{\hbox{R}^1\hbox{R}^2\hbox{CHOH}} \\ {\hbox{RCH}_2\hbox{OH} }\end{array} \dynrightarrow{Oxone}{\hbox{CH}_3\hbox{CN/H}_2\hbox{O}, 70^{\circ}\hbox{C}} \begin{array}{l}{\hbox{R}^1\hbox{R}^2\hbox{CO}} \\ {\hbox{RCOOH}} \end{array} A simple and environmentally friendly procedure for the oxidation of alcohols is presented utilizing Oxone^? (2KHSO₅ · KHSO₄ · K₂ SO₄) as oxidant and polymer-supported 2-iodobenzamide as catalyst in CH₃CN/H₂O mixed solvents.     

Living metathesis polymerization of (p-n-butyl-o,o,m,m-tetrafluorophenyl)acetylene by MoOcl4-n-Bu4Sn-EtOH (1:1:1)

Summary Possibility of living metathesis polymerization by Mo catalysts was examined for (p-n-butyl-o,o,m,m-tetrafluorophenyl)acetylene, which has two fluorine atoms at both ortho positions. The MoOCl₄-n-Bu₄Sn-EtOH (1:1:1) catalyst yielded a polymer with narrow molecular weight distribution ( ), but the corresponding MoCl₅-based catalyst did not formed such a polymer. With the former catalyst, the number-average molecular weight of polymer increased in direct proportion to monomer conversion, while the molecular weight distribution remained narrow; this proves the livingness of the polymerization. The optimal conditions for the living polymerization were [n-Bu₄Sn]/[MoOCl₄]=∼1.0, [EtOH]/[MoOCl₄]=0.5–1.5, and temperature≤30 °C. n-Butyl acetate and acetone as well as EtOH were effective as third catalyst components.     

Two New Organic–Inorganic Hybrids Based on [SiW12O40]4? Anion: Hydrothermal Syntheses, Crystal Structures, and Electrochemical Properties

Two new organic–inorganic hybrid compounds [\textCu^\textI ( \texten ) ₂ ( \textH ₂ \textO )] ₂ { ( \textSiW^\textVI _{1 1} \textW^\textV ₁\textO ₄₀ ) ₂ [ \textCu^\textII ( \texten ) ₂ ( \textH ₂ \textO )] ₂ [\textCu^\textII ( \texten ) ₂ ] ₂ }·6 \textH ₂ \textO [{\text{Cu}}^{\text{I}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)]_{ 2} \left\{ {\left( {{\text{SiW}}^{\text{VI}}_{ 1 1} {\text{W}}^{\text{V}}_{ 1}{\text{O}}_{ 40} } \right)_{ 2} \left[ {{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)\left] {_{ 2} } \right[{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} } \right]_{ 2} } \right\}{\cdot}6 {\text{H}}_{ 2} {\text{O}} (1) and (H₂ L)₂[SiW₁₂O₄₀]·H₂O (2) [en = ethylenediamine, L = 1,4-bis(3-pyridinecarboxamido)benzene], have been hydrothermally synthesized and characterized by IR, elemental analyses, TG analysis, and single-crystal X-ray diffraction. Structural analyses indicate that compound 1 exhibits an interesting three-dimensional(3D) cross-like supramolecular network through arrangement of a 1D organic–inorganic hybrid chain { ( \textSiW^\textVI _{1 1} \textW^\textV ₁ \textO ₄₀ ) ₂ [ \textCu^\textII ( \texten ) ₂ ( \textH ₂ \textO )] ₂ [\textCu^\textII ( \texten ) ₂ ] ₂ } ^2- . \left\{ {\left( {{\text{SiW}}^{\text{VI}}_{ 1 1} {\text{W}}^{\text{V}}_{ 1} {\text{O}}_{ 40} } \right)_{ 2} \left[ {{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} \left( {{\text{H}}_{ 2} {\text{O}}} \right)\left] {_{ 2} } \right[{\text{Cu}}^{\text{II}} \left( {\text{en}} \right)_{ 2} } \right]_{ 2} } \right\}^{ 2- } . The compound 2 consists of protonated L ligand and [SiW₁₂O₄₀]⁴⁻ anion. The protonated L ligands have been extended into a 2D network via hydrogen-bonding interactions. The guest [SiW₁₂O₄₀]⁴⁻ clusters have been incorporated into the square voids of the 2D host network as templates. The electrochemical behavior and electrocatalysis of compound 2 bulk-modified carbon paste electrode (2-CPE) have been studied.     

Functionalization of cotton fabric orienting towards antibacterial activity

The primary objective of modifying cotton fabric was to impart bactericidal properties to attract various fields such as defence, space and textile industrial applications. Chemically initiated graft copolymerization of 4-vinyl pyridine (4-VP) and acrylonitrile (AN) onto cotton fabric was carried out using ceric ammonium nitrate as a redox initiator. Optimum conditions pertaining to maximum percentage of grafting were evaluated as a function of concentration of initiator [CAN], concentration of nitric acid, monomer concentration, water, temperature and reaction time. Maximum grafting of 4-VP (51.63%) and AN (69.23%) was obtained respectively at optimum [ \textCAN ] = 2.738 ×10 ^{- 2} \left[ {\text{CAN}} \right] = 2.738 \times {10^{ - 2}} and 2.19 × 10⁻² moles/L, [ 4 - \textVP ] = 47.55 ×10 ^{- 22}\textmoles/\textL \left[ {4 - {\text{VP}}} \right] = 47.55 \times {10^{ - 22}}{\text{moles}}/{\text{L}} , [ \textAN ] = 18.85 ×10 ^{- 22}\textmoles/\textL \left[ {\text{AN}} \right] = 18.85 \times {10^{ - 22}}{\text{moles}}/{\text{L}} , [ \textHN\textO₃ ] = 11.9 ×10 ^{- 2} \left[ {{\text{HN}}{{\text{O}}_3}} \right] = 11.9 \times {10^{ - 2}} and 89.5 × 10⁻²² moles/L in 20 and 25 ml of water at an optimum temperature 70 °C and 60 °C with in 180 and 120 min. Antibacterial properties were induced into the modified cotton fabric by treating the grafted fabric with benzyl chloride. The grafted and quaternized copolymer were characterized by FTIR and Thermogravimetrical analysis. The bactericidal action of cotton fabric was tested by filtration test and it was observed that fabric grafted with 4-VP was more effective and efficient antibacterial as compared to AN grafted cotton sample.     

Behaviour of nitrate impurity in nickelcadmium cells

The oxidation-reduction behaviour of NO₃ ^?, NO₂ ^?, N₂O₂ ^2?, NH₂OH and NH₃ at a platinum electrode in alkaline solution has been investigated using cyclic voltammetry. The results have been compared with the corresponding behaviour of these species at charged, porous cadmium and nickel hydroxide electrodes in order to understand the likely behaviour of NO₃ ^? impurities in nickelcadmium cells. The reactions are shown to be irreversible processes and strongly dependent on the nature of the electrode surfaces. The reactions which are likely to be involved in a charged cell can be represented by the overall scheme: $${\text{NO}}_{\text{3}} ^\_ {\text{NO}}_{\text{2}} ^\_ {\text{NH}}_{\text{3}} \xrightarrow{{{\text{slow}}}}{\text{N}}_2 $$ It is suggested that the self-discharge of cells containing NO₃ ^? is limited by slow kinetic effects rather than by diffusion as previously supposed.     

Structure and Spectral Characteristics of 3D-Supramolecular Coordination Polymers Based on Copper Cyanide and Dimethylquinoxaline

The reactions of K₃[Cu(CN)₄], R₃SnCl (R = Me or ph) and 2,3-dimethyl quinoxaline (dmqox) in H₂O/acetonitrile media at room temperature afford the 3D-supramolecular coordination polymers (SCP) ³_￥ [ \textCu ₂ ( \textCN ) ₂ \textdmqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 2} {\text{dmqox}}} \right] , 1 and ³_￥ [ \textCu ₂ ( \textCN ) ₄ ·( \textPh ₃ \textSn ) ₂ ·\textdmqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 4} \cdot \left( {{\text{Ph}}_{ 3} {\text{Sn}}} \right)_{ 2} \cdot {\text{dmqox}}} \right] , 2. The structure of the tin free 1 consists of parallel zigzag chains connected by dmqox to form 2D-sheets containing hexagonal 18-atom fused Cu₆(CN)₄(dmqox)₂ rings. The interwoven sheets along the a axis are close packed by extensive H-bonds developing 3D-network structure. The structures of 1 and 2 are investigated by elemental analysis IR, NMR and mass spectra. The ESI⁺ and ESI⁻ mass spectra of 2 support its polymeric nature while the ESI⁺ mass spectrum confirms the expected M. W. suggested by elemental analysis. The ¹³C-NMR spectrum of 2 supports the fact that the network structure of 2 contains the rhombic [Cu₂(μ₃-CN)₂] motif. The structure of 2 was compared with the structure of the reported prototype ³_￥ [ \textCu ₂ ( \textCN ) ₄ ·( \textPh ₃ \textSn ) ₂ ·\textqox ] ^{ 3}_{\infty } \left[ {{\text{Cu}}_{ 2} \left( {\text{CN}} \right)_{ 4} \cdot \left( {{\text{Ph}}_{ 3} {\text{Sn}}} \right)_{ 2} \cdot {\text{qox}}} \right] as well as the other related structures.     

Synthesis and Some Properties of Fluorinated Cationic Surfactants

Three fluorinated cationic surfactants were prepared by condensing N-methyl diethanol amine pentafluoro benzoate with stoichiometric amounts of octyl, dodecyl or hexadecyl bromide. The surface properties and parameters were investigated to find the relationship between the structures of the hydrophobic portion of such compounds. The properties studied include surface tension, critical micelle concentration (CMC), effectiveness (Π_cmc), maximum surface excess (Γ_max) and minimum surface area (A_min) were investigated with respect to different concentrations at 25 °C. Standard free energies of micellization and adsorption of the prepared surfactants in the aqueous solution were studied. The values of Γ_max, standard free energies of micellization \Updelta \textG_\textmic^\texto \Updelta {\text{G}}_{\text{mic}}^{\text{o}} and adsorption \Updelta \textG_\textads^\texto \Updelta {\text{G}}_{\text{ads}}^{\text{o}} were found to increase with the chain length, while the cmc and minimum surface area occupied by one molecule A_min were found to decrease. The biocidal activity was determined through the inhibition zone diameter of prepared compounds which were measured against five strains of a representative group of microorganisms.