溶液中镓的提取与分离研究进展

从钢铁、有色金属、煤化工及磷化工等行业中的含镓物料中回收镓,需面临从含有多种金属离子的溶液中分离镓的问题。综述了含镓溶液中提取和分离镓的研究现状,分析和讨论了溶剂萃取、液膜萃取、萃淋树脂萃取等工艺的关键影响因素,并展望了研究趋势。溶剂萃取、液膜萃取及萃淋树脂萃取工艺皆能有效提取和分离溶液中的镓,其中协同萃取、液膜萃取及萃淋树脂萃取的选择性和萃取效率高,而且流程短、环境友好,应用前景好,是今后研究的发展方向。     

离子液体在萃取分离中的应用进展

作为环境友好型功能材料——离子液体以其独特的物理化学性质已引起人们的广泛关注。离子液体在萃取分离有机物、无机金属离子领域的应用越来越多。概述了离子液体在萃取分离中的应用。总结了离子液体的萃取机理,介绍了离子液体的结构如阴、阳离子的类型对萃取效率的影响规律,讨论了静电作用、疏水作用、氢键等作用力在萃取分离过程中所扮演的角色。最后展望了离子液体在萃取分离领域的发展方向。     

Preparation of Inorganic Materials Using Ionic Liquids

Conventional synthesis of inorganic materials relies heavily on water and organic solvents. Alternatively, the synthesis of inorganic materials using, or in the presence of, ionic liquids represents a burgeoning direction in materials chemistry. Use of ionic liquids in solvent extraction and organic catalysis has been extensively studied, but their use in inorganic synthesis has just begun. Ionic liquids are a family of non‐conventional molten salts that can act as templates and precursors to inorganic materials, as well as solvents. They offer many advantages, such as negligible vapor pressures, wide liquidus ranges, good thermal stability, tunable solubility for both organic and inorganic molecules, and much synthetic flexibility. In this Review, the use of ionic liquids in the preparation of several categories of inorganic and hybrid materials (i.e., metal structures, non‐metal elements, silicas, organosilicas, metal oxides, metal chalcogenides, metal salts, open‐framework structures, ionic liquid‐functionalized materials, and supported ionic liquids) is summarized. The status quo of the research field is assessed, and some future perspectives are furnished.     

Tendencies in Application of Ionic Liquids and Binary Extractants in Extraction and Separation of Lanthanides and Actinides

Radiochemistry - Published data on the application of ionic liquids (ILs) and binary extractants in the extraction and separation of rare-earth metals (REMs) and radioactive elements, published in...     

Liquid membrane operations in a microfluidic device for selective separation of metal ions

A three-phase flow, water/n-heptane/water, was constructed in a microchannel (100-microm width, 25-microm depth) on a glass microchip (3 cm x 7 cm) and was used as a liquid membrane for separation of metal ions. Surface modification of the microchannel by octadecylsilane groups induced spontaneous phase separation of the three-phase flow in the microfluidic device, which allows control of interfacial contact time and off-chip analysis using conventional analytical apparatus. Prior to the selective transport of a metal ion through the liquid membrane in the microchannel, the forward and backward extraction of yttrium and zinc ions was investigated in a two-phase flow on a microfluidic device using 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (commercial name, PC-88A) as an extractant. The extraction conditions (contact time of the two phases, pH, extractant concentration) in the microfluidic device were examined. These investigations demonstrated that the conventional methodology for solvent extraction of metal ions is applicable to solvent extraction in a microchannel. Finally, we employed the three-phase flow in the microchannel as a liquid membrane and observed the selective transport of Y ion through the liquid membrane. In the present study, we succeeded, for the first time, in the selective separation of a targeted metal ion from an aqueous feed solution to a receiving phase within a few seconds by employing a liquid membrane formed in a microfluidic device.     

离子液体工业化应用及关键技术问题

离子液体以其独特的性质广受关注,人们对其潜在的应用价值做了大量的研究。本文重点介绍离子液体工业化尤其是在石油化工中萃取分离、催化烷基化方面的应用研究进展,分析了离子液体在工业化过程中的关键技术和亟待解决的问题。     

25th Anniversary Article: “Cooking Carbon with Salt”: Carbon Materials and Carbonaceous Frameworks from Ionic Liquids and Poly(ionic liquid)s

This review surveys recent work on the use of ionic liquids (ILs) and polymerized ionic liquids (PILs) as precursors to synthesize functional carbon materials. As solvents or educts with negligible vapour pressure, these systems enable simple processing, composition, and structural control of the resulting carbons under rather simple and green synthesis conditions. Recent applications of the resulting nanocarbons across a multitude of fields, such as fuel cells, energy storage in batteries and supercapacitors, catalysis, separation, and sorption materials are highlighted.     

Bioderived Ionic Liquids with Alkaline Metal Ions for Transient Ionics

Choline lactate, an ionic liquid composed of bioderived materials, offers an opportunity to develop biodegradable electrochemical devices. Although ionic liquids possess large potential windows, high conductivity, and are nonvolatile, they do not exhibit electrochemical characteristics such as intercalation pseudocapacitance, redox pseudocapacitance, and electrochromism. Herein, bioderived ionic liquids are developed, including metal ions, Li, Na, and Ca, to yield ionic liquid with electrochemical behavior. Differential scanning calorimetry results reveal that the ionic liquids remained in liquid state from 230.42 to 373.15 K. The conductivities of the ionic liquids with metal are lower than those of the pristine ionic liquid, whereas the capacitance change negligibly. A protocol of the Organization for Economic Co-operation and Development 301C modified MITI test (I) confirms that the pristine ionic liquid and ionic liquids with metal are readily biodegradable. Additionally, an ionic gel comprising the ionic liquid and poly(vinyl alcohol) is biodegradable. An electrochromic device is developed using an ionic liquid containing Li ions. The device successfully changes color at −2.5 V, demonstrating the intercalation of Li ions into the WO₃ crystal. The results suggest that the electrochemically active ionic liquids have potential for the development of environmentally benign devices, sustainable electronics, and bioresorbable/implantable devices.     

FeCl3低温共熔Cl深度萃取模拟油脱硫性能的研究

用 N-甲基咪唑和氯代正辛烷为原料,首先合成出中间体[Omim]Cl,然后与几种典型的金属氯化物按不同的物质的量比合成出了一系列的离子液体,采用红外光谱对其进行表征,并考察了离子液体对正辛烷中二苯并噻吩的萃取脱除效果。对几种不同的离子液体的脱硫性能进行了初步比较,并针对[Omim]Cl·2FeCl3离子液体详尽考察了剂油体积比、萃取时间、萃取温度、硫化物的种类、重复利用次数等因素对脱硫率的影响。结果表明,萃取温度为25℃,萃取时间为20 min,剂油体积比为1∶20时,[Omim]Cl·2FeCl3对 DBT 的脱除率高达99.20%,并且对4种不同含硫组分的脱除能力：DBT>BT>T>3-MT。且离子液体再重复使用5次后,对 DBT 的脱除率还能够达到89.56%,离子液体经回收之后,对 DBT 的脱除率没有明显的下降,表明再生效果良好。实验数据对咪唑离子液体的萃取脱硫性能研究和反应条件的优选提供了重要信息。     

New Frontiers in Materials Science Opened by Ionic Liquids

Ionic liquids (ILs) including ambient‐temperature molten salts, which exist in the liquid state even at room temperature, have a long research history. However, their applications were once limited because ILs were considered as highly moisture‐sensitive solvents that should be handled in a glove box. After the first synthesis of moisture‐stable ILs in 1992, their unique physicochemical properties became known in all scientific fields. ILs are composed solely of ions and exhibit several specific liquid‐like properties, e.g., some ILs enable dissolution of insoluble bio‐related materials and the use as tailor‐made lubricants in industrial applications under extreme physicochemical conditions. Hybridization of ILs and other materials provides quasi‐solid materials, which can be used to fabricate highly functional devices. ILs are also used as reaction media for electrochemical and chemical synthesis of nanomaterials. In addition, the negligible vapor pressure of ILs allows the fabrication of electrochemical devices that are operated under ambient conditions, and many liquid‐vacuum technologies, such as X‐ray photoelectron spectroscopy (XPS) analysis of liquids, electron microscopy of liquids, and sputtering and physical vapor deposition onto liquids. In this article, we review recent studies on ILs that are employed as functional advanced materials, advanced mediums for materials production, and components for preparing highly functional materials.     

离子液体的合成与纯化方法研究进展

综述了离子液体的种类、合成及纯化方法。离子液体的纯度对其物理化学性质至关重要,是研究其应用的首要问题。本文介绍了离子液体的合成方法,并对比了其优缺点,发现合成方法对离子液体的纯度起着关键作用,指出了影响离子液体纯度的因素,分析对比了离子液体的纯化方法,包括真空干燥、有机溶剂萃取、重结晶、吸附剂法、分子筛法等,根据影响因素种类的不同,优选纯化方法,并对离子液体的发展进行了展望。     

Immobilized ionic liquids as high-selectivity/high-temperature/high-stability gas chromatography stationary phases

Ionic liquids (ILs) are a class of nonmolecular solvents in which the cation/anion combination can be easily tuned to provide desired chemical and physical properties. When used as stationary phases in gas-liquid chromatography, ionic liquids exhibit dual nature retention selectivity. That is, they are able to separate polar molecules such as a polar stationary phase and nonpolar molecules such as a nonpolar stationary phase. However, issues such as optimization of the wetting ability of the ionic liquid on fused-silica capillaries, the maximum operating temperatures of the stationary phases, and nonuniform film thickness on the wall of the capillary at high temperatures have limited their use in gas chromatography. As described in this paper, these limitations are overcome by cross-linking a new class of ionic liquid monomers by free radical reactions to provide a more durable and robust stationary phase. By lightly cross-linking the ionic liquid stationary phase using a small amount of free radical initiator, high-efficiency capillary columns were produced that are able to endure high temperatures with little column bleed. Two types of cross-linked IL stationary phases are developed. A partially cross-linked stationary phase allows for high-efficiency separations up to temperatures of approximately 280 degrees C. However, by creating a more highly cross-linked stationary phase of geminal dicationic ILs, exclusively, an increase in efficiency is observed at high temperatures allowing for its use over 350 degrees C. In addition, through the use of solvation thermodynamics and interaction parameters, it was shown that the cross-linking/immobilization of the ionic liquid does not affect the selectivity of the stationary phase thereby preserving its dual nature retention behavior.     

磁性离子液体的制备与应用研究进展

磁性离子液体是一种新型的功能化离子液体材料,具有优良的热稳定性、优异的电化学性能、良好的溶解性能以及可回收性等特性,使其在萃取分离、反应催化和复合材料等领域具有较好的应用前景。对目前合成的磁性离子液体做了概述并根据构效关系对主要的磁性离子液体进行了分类。综述了磁性离子液体的主要制备方法,主要有一步合成法、二步合成法和辅助合成法。介绍了磁性离子液体在萃取分离、反应催化及碳纳米管复合材料领域应用研究进展。最后根据磁性离子液体在合成和应用中的不足做了展望。     

Solid-phase extractants for radionuclide preconcentration and separation. New possibilities

A review of solid-phase extractants for radionuclide preconcentration and separation is presented. Examples of solid-phase extractants prepared by impregnation of various supports with compounds used in liquid extraction are considered. The possibilities of using carbon nanotubes and ionic liquids for preparing new solid-phase extractants are discussed. Experimental data on sorption recovery of actinides, europium, and palladium from nitric acid solutions with solid-phase extractants prepared by impregnation of carbon nanotubes and polymeric supports with ionic liquids and ligands are presented.     

Beyond solvents and electrolytes: Ionic liquids-based advanced functional materials

Instead of being seen as alternative solvents and electrolytes for organic reactions, catalysis, separation, electrochemistry, and so on, ionic liquids (ILs) consisting of discrete cations and anions have recently emerged as versatile building blocks for advanced functional materials. A number of functional ILs and IL-containing composite materials have been realized by either chemical modification (covalent functionalization or ion-exchange metathesis) or physical integration of ILs and traditional materials. The unique structure and behavior of ILs as a platform not only provides additional opportunities to adjust the physicochemical properties of these ionic materials for task-specific applications, but also offers other attractive features such as intrinsic ionic conductivity and high thermal, chemical, and electrochemical stability. These soft materials combine the favorable features of ILs and the original chemistries of the functional groups or materials; some even possess unexpected functions resulting from synergetic interaction between these two components. Materialization of ILs is truly a novel, promising research direction for both IL chemistry and materials science. In this article, we review recent advances in IL-based functional materials, focusing on smart and sensitive materials, optical materials, energetic materials, and IL/carbon hybrid materials.     

Technologies for the removal of phenol from fluid streams: a short review of recent developments

The available technologies for the abatement of phenol from water and gaseous streams are briefly reviewed, and the recent advancements summarized. Separation technologies such as distillation, liquid–liquid extraction with different solvents, adsorption over activated carbons and polymeric and inorganic adsorbents, membrane pervaporation and membrane–solvent extraction, have been discussed. Destruction technologies such as non-catalytic, supercritical and catalytic wet air oxidation, ozonation, non-catalytic, catalytic and enzymatic peroxide wet oxidation, electrochemical and photocatalytic oxidation, supercritical wet gasification, destruction with electron discharges as well as biochemical treatments have been considered. As for the abatement of phenol from gases, condensation, absorption in liquids, adsorption on solids, membrane separation, thermal, catalytic, photocatalytic and biological oxidation have also been considered. The experimental conditions and the performances of the different techniques have been compared.     

Designing ionic liquid solvents for carbon capture using property-based visual approach

Recently, ionic liquids (ILs) have been introduced as potential carbon dioxide (CO₂)-capturing solvents, as a substitute to conventional amine-based solvents. Conventional amine-based solvents that are used for CO₂ capture show some drawbacks, such as high solvent loss, high regeneration energy requirement, and solvent degradation. These shortcomings can be potentially overcome if IL-based solvents are considered. ILs have negligible vapour pressure, high thermal stability, and wide range of thermophysical properties. Nonetheless, using experimentation to identify suitable ILs as CO₂-capturing solvents is a tedious and costly task, as there are more than a million possible combinations of cations and anions that make up the ILs. Computer-aided tools have been previously developed for targeted IL design, which often involve non-linear programming. However, non-linear programming sometimes fails to converge, due to enlarged search space for optimal solution and its complex formulations. In this paper, the authors present a simple yet systematic visual approach to design IL solvents for carbon capture. Property integration framework is employed in this approach to systematically design IL, where the design problem can be mapped from the property domain into a cluster domain through clustering technique. The advantage of the visual approach is the ability to enumerate novel IL candidates. Group contribution (GC) method is included in the framework to estimate the properties of designed ILs. By combining property integration framework and GC method, the proposed approach is able to provide a property-based platform to visualise the performance of designed ILs on a ternary diagram. A case study is presented to illustrate the validity of the proposed approach.     

Ionic liquids as matrixes for matrix-assisted laser desorption/ionization mass spectrometry

Room-temperature ionic liquids are useful as solvents for organic synthesis, electrochemical studies, and separations. We wished to examine whether their high solubalizing power, negligible vapor pressure, and broad liquid temperature range are advantageous if they are used as matrixes for UV-MALDI. Several different ionic matrixes were synthesized and tested, using peptides, proteins, and poly(ethylene glycol) (PEG-2000). All ionic liquids tested have excellent solubilizing properties and vacuum stability compared to other commonly used liquid and solid matrixes. However, they varied widely in their ability to produce analyte gas-phase ions. Certain ionic matrixes, however, produce homogeneous solutions of greater vacuum stability, higher ion peak intensity, and equivalent or lower detection limits than currently used solid matrixes. Clearly, ionic liquids and their more amorphous solid analogues merit further investigation as MALDI matrixes.     

Ionic liquid-assisted synthesis of tri-functional ruthenium oxide nanoplatelets for electrochemical energy applications

Journal of Materials Science - Nanostructured crystalline metal oxides are in great demand in industrial processes due to their unique physicochemical properties and ionic liquids (ILs) are...     

离子液体在催化中的应用研究进展

近年来,离子液体以其独特的优势成为催化体系研究的热点。离子液体具有良好的溶解性、较低的挥发性、可设计性和可重复使用性等特点,作为反应催化剂和溶剂,其相比于传统溶剂展现出更好的选择性和反应速率。综述了离子液体作为反应催化剂、反应溶剂、共催化剂或活性催化剂、负载型离子液体等在催化体系中的应用研究进展,并展望了离子液体在催化中的发展前景。