Microwave dielectric properties of (1 − x)ZnMoO4-xTiO2 composite ceramics

(1 − x)ZnMoO₄-xTiO₂ (x = 0.0, 0.05, 0.158, 0.25, and 0.35) composite ceramics were synthesized by the conventional solid state reaction process. The sintering behavior, phase composition, chemical compatibility with silver, and microwave dielectric properties were investigated. All the specimens can be well densified below 950 °C. From the X-ray diffraction analysis, it indicates that the triclinic wolframite ZnMoO₄ phase coexists with the tetragonal rutile TiO₂ phase, and it is easy for silver to react with ZnMoO₄ to form Ag₂Zn₂(MoO₄)₃ phase and hard to react with TiO₂. When the volume fraction of TiO₂ (x value) increasing from 0 to 0.35, the microwave dielectric permittivity of the (1 − x)ZnMoO₄-xTiO₂ composite ceramics increases from 8.0 to 25.2, the Q_f value changes in the range of 32,300-43,300 GHz, and the temperature coefficient τ_f value varies from −128.9 to 157.4 ppm/°C. At x = 0.158, the mixture exhibits good microwave dielectric properties with a ?_r = 13.9, a Q_f = 40,400 GHz, and a τ_f = +2.0 ppm/°C.     

Characterization of sol-gel synthesised lead-free (1 − x)Na0.5Bi0.5TiO3-xBaTiO3-based ceramics

The crystal structure, microstructure, dielectric and ferroelectric properties of (1 − x)Na_0.5Bi_0.5TiO₃-xBaTiO₃ ceramics with x = 0, 0.03, 0.05, 0.07 and 0.1 are investigated. A structural variation according to the system composition was investigated by X-ray diffraction (XRD) analyses. The results revealed that the synthesis temperature for pure perovskite phase powder prepared by the present sol-gel process is much lower (800 °C), and a rhombohedral-tetragonal morphotropic phase boundary (MPB) is found for x = 0.07 composition which showing the highest remanent polarization value and the smallest coercive field. The optimum dielectric and piezoelectric properties were found with the 0.93Na_0.5Bi_0.5TiO₃-0.07BaTiO₃ composition. The piezoelectric constant d₃₃ is 120 pC/N and good polarization behaviour was observed with remanent polarization (P_r) of 12.18 pC/cm², coercive field (E_c) of 2.11 kV/mm, and enhanced dielectric properties ?_r > 1500 at room temperature. The 0.93Na_0.5Bi_0.5TiO₃-0.07BaTiO₃-based ceramic is a promising lead-free piezoelectric candidate for applications in different devices.     

Phase structure and electrical properties of (0.8 − x) BaTiO3-0.2Bi0.5Na0.5TiO3-xBaZrO3 lead-free piezoceramics

Lead-free piezoelectric ceramics (0.8 − x)BaTiO₃-0.2Bi_0.5Na_0.5TiO₃-xBaZrO₃ (BT-BNT-xBZ, 0 ≤ x ≤ 0.08) doped with 0.3 wt% Li₂CO₃ were prepared by conventional solid-state reaction method. With the Li₂CO₃ doping, all the ceramics can be well sintered at 1170-1210 °C. The phase structure, dielectric, ferroelectric and piezoelectric properties of the ceramics were investigated. Results show that a morphotropic phase boundary (MPB) between tetragonal and pseudocubic phases exists at x = 0.03-0.04. The addition of Zr can improve the piezoelectric properties of BT-BNT ceramics. Furthermore, a relaxor behavior is induced and the tetragonal-cubic phase transition shifts towards lower temperatures after the addition of Zr. The ceramics with x = 0.03 possess the optimum electrical properties: d₃₃ = 72 pC/N, k_p = 15.4%, ?_r = 661, P_r = 18.5 μC/cm², E_c = 34.1 kV/cm, T_c = 150 °C.     

Enhancement microwave dielectric properties of La(Mg0.5Sn0.5)O3 ceramics by substituting Mg with Ni

The microwave dielectric properties of La(Mg_0.5−xNi_xSn_0.5)O₃ ceramics were examined with a view to their exploitation for mobile communication. The La(Mg_0.5−xNi_xSn_0.5)O₃ ceramics were prepared by the conventional solid-state method at various sintering temperatures. The X-ray diffraction patterns of the La(Mg_0.4Ni_0.1Sn_0.5)O₃ ceramics revealed no significant variation of phase with sintering temperatures. Apparent density of 6.71 g/cm³, dielectric constant (?_r) of 20.19, quality factor (Q × f) of 74,600 GHz, and temperature coefficient of resonant frequency (τ_f) of −85 ppm/°C were obtained for La(Mg_0.4Ni_0.1Sn_0.5)O₃ ceramics that were sintered at 1550 °C for 4 h.     

Structure, dielectric and electric properties of (Ba0.68−xSr0.308Bi0.006Na0.006Mgx)(Ti0.99Sn0.01)O3 ceramics

(Ba_0.68−xSr_0.308Bi_0.006Na_0.006Mg_x)(Ti_0.99Sn_0.01)O₃ ceramics were synthesized by solid-state reaction process. The samples (X ≤ 0.010) are a mixture of cubic (major) and rhombohedral (minor) phases. The rhombohedral phase causes a large dielectric loss in low temperature regions and plays an important role in diffuse phase transition of ceramics. While X > 0.010, the rhombohedral phase decreases and gradually disappears. The dielectric loss of ceramics in the low temperature regions decreases, and the samples change from the diffuse phase transition to the phase transition of second order, and then to of first order. In the temperature range of 270-370 °C, intrinsic conduction dominates conductivity of ceramics.     

High-dielectric-constant and low-loss microwave dielectric in the (1 − x)La(Mg0.5Ti0.5)O3-x(Ca0.8Sr0.2)TiO3 solid solution system

The microwave dielectric properties and microstructures of (1 − x)La(Mg_0.5Ti_0.5)O₃-x(Ca_0.8Sr_0.2)TiO₃ ceramics, prepared by a mixed oxide route, have been investigated. The forming of solid solutions was confirmed by the XRD patterns and the measured lattice parameters for all compositions. A near zero τ_f was achieved for samples with x = 0.5, although the dielectric properties varied with sintering temperature. The Q × f value of 0.5La(Mg_0.5Ti_0.5)O₃-0.5(Ca_0.8Sr_0.2)TiO₃ increased up to 1475 °C, after which it decreased. The decrease in dielectric properties was coincident with the onset of rapid grain growth. The optimum combination of microwave dielectric properties was achieved at 1475 °C for samples where x = 0.5 with a dielectric constant ?_r of 47.12, a Q × f value of 35,000 GHz (measured at 6.2 GHz) and a τ_f value of −4.7 ppm/°C.     

Synthesis, structural and microwave dielectric properties of Al2W3−xMoxO12 (x = 0-3) ceramics

Low dielectric ceramics in the Al₂W_3−xMo_xO₁₂ (x = 0-3) system have been prepared through solid state ceramic route. The phase purity of the ceramic compositions has been studied using powder X-ray diffraction (XRD) studies. The microstructure of the sintered ceramics was evaluated by Scanning Electron Microscopy (SEM). The crystal structure of the ceramic compositions as a result of Mo substitution has been studied using Laser Raman spectroscopy. The microwave dielectric properties of the ceramics were studied by Hakki and Coleman post resonator and cavity perturbation techniques. Al₂Mo_xW_3−xO₁₂ (x = 0-3) ceramics exhibited low dielectric constant and relatively high unloaded quality factor. The temperature coefficient of resonant frequency of the compositions is found to be in the range −41 to −72 ppm/°C.     

Structure and dielectric characterization of xNd(Mg1/2Ti1/2)O3-(1 − x)Ca0.6La0.8/3TiO3 in the microwave frequency range

The crystal structures, phase compositions and the microwave dielectric properties of the xLa(Mg_1/2Ti_1/2)O₃-(1 − x)Ca_0.8Sr_0.2TiO₃ composites prepared by the conventional solid state route have been investigated. The formation of solid solution is confirmed by the XRD patterns. Doping with B₂O₃ (0.5 wt.%) can effectively promote the densification and the dielectric properties of xNd(Mg_1/2Ti_1/2)O₃-(1 − x)Ca_0.6La_0.8/3TiO₃ ceramics. It is found that xNd(Mg_1/2Ti_1/2)O₃-(1 − x)Ca_0.6La_0.8/3TiO₃ ceramics can be sintered at 1375 °C, due to the liquid phase effect of B₂O₃ addition observed by Scanning Electronic Microscopy. At 1375 °C, 0.4Nd(Mg_1/2Ti_1/2)O₃-0.6Ca_0.6La_0.8/3TiO₃ ceramics with 1 wt.% B₂O₃ addition possesses a dielectric constant (?_r) of 49, a Q × f value of 13,000 (at 8 GHz) and a temperature coefficients of resonant frequency (τ_f) of 1 ppm/°C. As the content of Nd(Mg_1/2Ti_1/2)O₃ increases, the highest Q × f value of 20,000 GHz for x = 0.9 is achieved at the sintering temperature 1400 °C.     

High permittivity and low dielectric loss of the Ca1−xSrxCu3Ti4O12 ceramics

The Ca_1−xSr_xCu₃Ti₄O₁₂ (CSCTO) giant dielectric ceramics were prepared by conventional solid-state method. X-ray diffraction patterns revealed that a small amount of Sr²⁺ (x < 0.2) had no obvious effect on the phase structure of the CSCTO ceramics, while with increasing the Sr²⁺ content, a second phase of SrTiO₃ appeared. Electrical properties of CSCTO ceramics greatly depended on the Sr²⁺ content. The Ca_0.9Sr_0.1Cu₃Ti₄O₁₂ ceramics exhibited a higher permittivity (71,153) and lower dielectric loss (0.022) when measured at 1 kHz at room temperature. The ceramics also performed good temperature stability in the temperature range from −50 °C to 100 °C at 1 kHz. By impedance spectroscopy analysis, all compounds were found to be electrically heterogeneous, showing semiconducting grains and insulating grain boundaries. The grain resistance was 1.28 Ω and the grain boundary resistance was 1.31 × 10⁵ Ω. All the results indicated that the Ca_0.9Sr_0.1Cu₃Ti₄O₁₂ ceramics were very promising materials with higher permittivity for practical applications.     

Interstitial solid solution Hf5GaxSn3 (x = 0-1)

Formation of an interstitial solid solution Hf₅Ga_xSn₃ (x = 0-1) based on the binary compound Hf₅Sn₃ (structure type Mn₅Si₃, Pearson symbol hP16, space group P6₃/mcm, a = 8.36562(6), c = 5.70775(4) Å from X-ray powder diffraction) was established at 600 °C. The crystal structure (structure type Hf₅CuSn₃, ordered derivative of Ti₅Ga₄, hP18, P6₃/mcm) was refined on X-ray single-crystal diffraction data for three compositions: Hf₅Ga_0.16(3)Sn₃ (a = 8.3288(12), c = 5.6988(11) Å), Hf₅Ga_0.53(2)Sn₃ (a = 8.4205(12), c = 5.7655(12) Å) and Hf₅GaSn₃ (a = 8.5564(12), c = 5.7859(12) Å). The Ga atoms occupy Wyckoff position 2b at the centres of Hf₆ octahedral interstices.     

Low temperature sintering and microwave dielectric properties of (Mg0.7Zn0.3)0.95Co0.05TiO3 ceramics with BaCu(B2O5) additions

The effects of BaCu(B₂O₅) additives on the sintering temperature and microwave dielectric properties of (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics were investigated. The (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics were not able to be sintered below 1000 °C. However, when BaCu(B₂O₅) were added, they were sintered below 1000 °C and had the good microwave dielectric properties. It was suggested that a liquid phase with the composition of BaCu(B₂O₅) was formed during the sintering and assisted the densification of the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics at low temperature. BaCu(B₂O₅) powders were produced and used to reduce the sintering temperature of the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics. Good microwave dielectric properties of Q × f = 35,000 GHz, ?_r = 18.5.0 and τ_f = −51 ppm/°C were obtained for the (Mg_0.7Zn_0.3)_0.95Co_0.05TiO₃ ceramics containing 7 wt.% mol% BaCu(B₂O₅) sintered at 950 °C for 4 h.     

Preparation and electrical properties of perovskite ceramics in the system BaBi1−xSbxO3 (0 ≤ x ≤ 0.5)

The effect of the composition on the electrical properties of BaBi_1−xSb_xO₃ (0 ≤ x ≤ 0.5) negative temperature coefficient (NTC) thermistors was studied. Major phases present in the sintered bodies of BaBi_1−xSb_xO₃ (0 < x < 0.5) ceramics were BaBi_0.5Sb_0.5O₃ compounds with a rhombohedral structure and BaBiO₃ compounds with a monoclinal structure. Most pores were located in the grains of BaBiO₃ and BaBi_0.5Sb_0.5O₃ ceramics. It was apparent that the ρ₂₅ and B_25/85 constant of the thermistors increased with increasing Sb content.     

High-Q microwave dielectrics in the (Mg1−xZnx)Al2O4 (x = 0-0.1) system

The microwave dielectric properties and the microstructures of (Mg_1−xZn_x)Al₂O₄ (x = 0-0.1) ceramic system prepared by the conventional solid-state route were investigated. The forming of spinel-structured (Mg_1−xZn_x)Al₂O₄ (x = 0-0.1) solid solutions was confirmed by the XRD patterns and the measured lattice parameters, which linearly varied from a = b = c = 8.0815 Å for MgAl₂O₄ to a = b = c= 8.0828 Å for (Mg_0.9Zn_0.1)Al₂O₄. By increasing x, the Q × f of (Mg_1−xZn_x)Al₂O₄ can be tremendously boosted from 82,000 GHz at x = 0 to a maximum of 156,000 GHz at x = 0.05. The Zn substitution was effective in reducing the dielectric loss without detrimental effects on the ?_r and τ_f values of the ceramics.     

X-ray diffraction and dielectric studies across morphotropic phase boundary in (1 − x) [Pb(Mg0.5W0.5)O3]-xPbTiO3 ceramics

We present here the results of comprehensive X-ray diffraction and dielectric studies on several compositions of (1 − x)[Pb(Mg_0.5W_0.5)O₃]-xPbTiO₃ (PMW-xPT) solid solution across the morphotropic phase boundary. Rietveld analysis of the powder X-ray diffraction data reveals cubic (space group Fm3m) structure of PMW-xPT ceramics for the compositions with x ≤ 0.42, tetragonal (space group P4mm) structure for the compositions with x ≥ 0.72 and coexistence of the tetragonal and cubic phases for the intermediate compositions (0.46 ≤ x ≤ 0.68). Temperature dependence of the dielectric permittivity above room temperature exhibits diffuse nature of phase transitions for the compositions in the cubic and two phase region while the compositions with tetragonal structure at room temperature exhibit sharp ferroelectric to paraelectric phase transition. The PMW-xPT compositions with coexistence of tetragonal and cubic phases at room temperature exhibit two anomalies in the temperature dependence of the dielectric permittivity above room temperature. Using results of structural and dielectric studies a partial phase diagram of PMW-xPT ceramics is also presented.     

Study of structural, dielectric and electrical behavior of (1 − x)Ba(Fe0.5Nb0.5)O3-xSrTiO3 ceramics

Polycrystalline samples of BaFe_0.5Nb_0.5O₃ and (1 − x)Ba(Fe_0.5Nb_0.5)O₃-xSrTiO₃ [referred as BFN and BFN-ST respectively] (x = 0.00, 0.15 and 0.20) have been synthesized by a high-temperature solid-state reaction technique. The XRD patterns of the BFN and BFN-ST at room temperature show a monoclinic phase. The microstructure of the ceramics was examined by the scanning electron microscopy (SEM) and shows the polycrystalline nature of the samples with different grain sizes, which are inhomogeneously distributed through the sample surface. Detailed studies of dielectric and impedance properties of the materials in a wide range of frequency (100 Hz-5 MHz) and temperatures (30-270 °C) showed that properties are strongly temperature and frequency dependent. Complex Argand plane plot of ?″ against ?′, usually called Cole-Cole plots is used to check the polydispersive nature of relaxation phenomena in above mentioned compounds. Relaxation phenomena of non-Debye type have been observed in the BFN and BFN-ST ceramics, as confirmed by the Cole-Cole plots.     

Structure and electrical properties of MnO2-doped Sr2−xCaxNaNb5O15 lead-free piezoelectric ceramics

Lead-free piezoelectric ceramics Sr_2−xCa_xNaNb₅O₁₅ + y wt% MnO₂have been prepared by the conventional solid state reaction method. Our results reveal that Ca²⁺and Mn ions have entered into the Sr₂NaNb₅O₁₅ lattices to form a solid solution with tungsten-bronze structure. The substitution of Ca²⁺ induces a decrease in piezoelectric coefficient d₃₃, electromechanical coupling factors k_p and k_t, while, the addition of Mn ions decreases the sintering temperature and effectively promotes the densification of the ceramics. The effect of substitution of Ca²⁺and Mn ions on the structure, electrical properties and diffused phase changing were investigated systematically. For the ceramic with x = 0.05 and y = 0.5, the piezoelectric, dielectric and ferroelectric properties become optimum, giving a piezoelectric coefficient d₃₃ = 190 pC/N, electromechanical coupling factors k_p = 13.4% and k_t = 36.5%, ?_r = 2123, loss tangent tan δ = 0.038, remanent polarization P_r = 4.76 μC/cm², coercive field E_c = 12.68 kV/cm, and Curie temperature T_c = 260 °C.     

Low-firable high-K dielectric in the Zrx(Zn1/3Nb2/3)1−xTiO4 ceramic system

Composite ceramics in the solid solution of Zr_x(Zn_1/3Nb_2/3)_1−xTiO₄ (x = 0.1-0.4) have been prepared by the mixed oxide route. Formation of solid solution was confirmed by the X-ray diffraction patterns. The microwave dielectric properties, such as dielectric constant (?_r), Q × f value and temperature coefficient of resonant frequency (τ_f) have been investigated as a function of composition and sintering temperature. With x increasing from 0.1 to 0.4, the dielectric constant decreases from 70.9 to 43.2, and the τ_f decreases from 105 to 55 ppm/°C. The Q × f value, however, increases with increasing x value to a maximum 26,600 GHz (at 6 GHz) at x = 0.3, and then decreases thereafter. For low-loss microwave applications, a new microwave dielectric material Zr_0.3(Zn_1/3Nb_2/3)_0.7TiO₄, possessing a fine combination of microwave dielectric properties with a high ?_r of 51, a high Q × f of 26,600 GHz (at 6 GHz) and a τ_f of 70 ppm/°C, is suggested.     

Microstructure, ferroelectric, and piezoelectric properties of (1 − x − y)Bi0.5Na0.5TiO3-xBaTiO3-yBi0.5Ag0.5TiO3 lead-free ceramics

Lead-free (1 − x − y)Bi_0.5Na_0.5TiO₃-xBaTiO₃-yBi_0.5Ag_0.5TiO₃ (BNT-BT-BAT-x/y, x = 0-0.10, y = 0-0.075) piezoelectric ceramics were synthesized by conventional oxide-mixed method. The microstructure, ferroelectric, and piezoelectric properties of the ceramics were investigated. Results show that a morphotropic phase boundary (MPB) between rhombohedral and tetragonal phases of BNT-BT-BAT-x/0.04 ceramics is formed at x = 0.06-0.08. The addition of BAT has no obvious change on the crystal structure of BNT-BT ceramics while it causes the grain size of the ceramics to become more homogenous. Near the MPB, the ceramics with x = 0.06 and y = 0.05-0.06 possess optimum electrical properties: P_r ∼ 42.5 μC/cm², E_c ∼ 32.0 kV/cm, d₃₃ ∼ 172 pC/N, k_p ∼ 32.6%, and k_t ∼ 52.6%. The temperature dependences of k_p and polarization versus electric hysteresis loops reveal that the depolarization temperature (T_d) of BNT-BT-BAT-0.06/y ceramics decreases with increasing y. In addition, the polar and non-polar phases may coexist in the BNT-BT-BAT-x/y ceramics above T_d.     

Relationships between Zr substitution for Ti and microwave dielectric properties in Mg(ZrxTi1−x)O3 ceramics

The influence of Zr substitution for Ti on the microwave dielectric properties and microstructures of the Mg(Zr_xTi_1−x)O₃(MZ_xT) (0.01 ≤ x ≤ 0.3) ceramics was investigated. The quality factors of Mg(Zr_xTi_1−x)O₃ ceramics with x = 0.01-0.05 were improved because the solid solution of a small amount of Zr⁴⁺ substitution in the B-site could increase density and grain size. An excess of Zr⁴⁺ resulted in the formation of a great deal of secondary phase that declined the microwave dielectric properties of MZ_xT ceramics. The temperature coefficient of resonant frequency (τ_f) of Mg(Zr_xTi_1−x)O₃ ceramics slightly increased with increasing Zr content, and the variation in τ_f was attributed to the formation of secondary phases.     

Low-temperature sintering and dielectric properties of high-permittivity microwave (Ca, Nd)TiO3 ceramics

The effect of H₃BO₃-CuO-Li₂CO₃ combined additives on the sintering temperature, microstructure and microwave dielectric properties of (Ca_0.61Nd_0.26) (Ti_0.98Sn_0.02)O₃ (CNTS) ceramics was investigated. The H₃BO₃-CuO-Li₂CO₃ combined additives lowered the sintering temperature of CNTS ceramics effectively from 1300 to 950 °C. This may be due to the interim liquid-phase of Li₂O-CuO-B₂O₃, which were formed in the sintering process. (Li_0.5Nd_0.5)TiO₃ (LNT) demonstrated an effective compensation in τ_f value of the low-fired CNTS ceramics. The 0.4CNTS-0.6LNT ceramics with 5 wt% (H₃BO₃-CuO)-0.5 wt% Li₂CO₃ sintered at 900 °C for 2 h shows excellent dielectric properties: ?_r = 90.6, Q × f = 3400 GHz, and τ_f = 9 ppm/°C. Also, the LTCC material is compatible with Ag electrode.