Preparation and photocatalytic properties of sillenite Bi12TiO20 films

Sillenite Bi₁₂TiO₂₀ thin films with high photocatalytic activity have been successfully fabricated by means of chemical solution decomposition, and characterized by X-ray diffraction, energy-dispersive spectroscopy, atomic force microscopy, scanning electron microscopy and UV-Vis spectrophotometry. The photocatalytic activity of Bi₁₂TiO₂₀ thin films has been evaluated by photodegrading methyl orange solution and the effect of processing conditions on the photocatalytic activity has been studied in detail.     

In situ template polymerization of aniline on the surface of negatively charged TiO2 nanoparticles

The in situ oxidative template polymerization of aniline was performed successfully on the surface of negatively charged titania (TiO₂) nanoparticles with a mean diameter of 40 nm using ammonium persulfate and a Chem-Solv solution at pH 1 and 25 °C. SEM showed that the resulting polyaniline (PANI)/TiO₂ composites were well dispersed in solution due to the electrostatic repulsion force. Ultraviolet/visible spectroscopy, thermogravimetric analysis, Fourier-transform infrared spectroscopy, and cyclic voltammetry showed that the optical, thermal, and electrical properties of PANI/TiO₂ composites were quite different from those of pure PANI or TiO₂, which was attributed to the strong interaction between the two components. The conductivity of the PANI/TiO₂ composite was estimated to be 0.91 × 10⁻¹ S/cm at 25 °C in the range of semiconductor.     

Synthesis of monodispersed ultrafine Bi2S3 nanocrystals

Monodispersed ultrafine Bi₂S₃ nanocrystals of ∼3 nm were synthesized via a facile and mild method, in which thioacetamide and bismuth oleate complex were used as the sulfur and bismuth precursors, respectively. The obtained Bi₂S₃ nanocrystals possessed a high surface area of 305 m² g⁻¹. The nanostructures of Bi₂S₃ nanocrystals were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and selective area electron diffraction (SAED) techniques. The optical property of the Bi₂S₃ nanocrystals was studied by photoluminescence spectroscopy. A remarkable blue shift and a band gap of ∼1.5 eV were observed. The shape of the Bi₂S₃ nanocrystals could be tuned by adjusting the initial Bi/S molar ratio and reaction temperature, respectively. A possible burst nucleation mechanism for this monodispersed ultrafine Bi₂S₃ nanocrystals was proposed.     

TiO2/膨润土复合光催化材料的常温制备及性能研究

采用改进的溶胶-凝胶法,在以水为主要溶剂的反应体系中,控制钛酸四丁酯充分水解、缓慢聚合,在 常压、低温(70℃)的温和条件下制备出稳定的TiO₂纳米晶溶胶,并利用TiO₂纳米晶溶胶在膨润土表面负载,获得TiO₂/膨润土复合光催化材料。采用 X 射线衍射、扫描电镜、比表面积测定等研究手段对样品的结构形貌进行了表征,并考察了其光催化活性。结果表明：较高的水用量有利于TiO₂晶体形成,当去离子水:钛酸四丁酯摩尔比大于167:1时,在溶胶体系中出现了锐钛矿型TiO₂纳米晶体;TiO₂纳米晶主要负载于膨润土表面,并未嵌入到膨润土层间结构,但相对于单一膨润土,TiO₂负载显著提高了材料比表面积;当去离子水:钛酸四丁酯摩尔比=192:1时,在紫外光照射下,复合光催化材料表现出最高的光催化活性,对亚甲基蓝的降解率达到93.8%。     

Photocatalytic performance of nano-photocatalyst from TiO2 and Fe2O3 by mechanochemical synthesis

Nano-particles of homogeneous solid solution between TiO₂ and Fe₂O₃ (up to 10 mol%) have been prepared by mechanochemical milling of TiO₂ and yellow Fe₂O₃/red Fe₂O₃/precipitated Fe (OH)₃ using a planetary ball mill. Such novel solid solution cannot be prepared by conventional co-precipitation technique. A preliminary investigation of photocatalytic activity of mixed oxide (TiO₂/Fe₂O₃) on photo-oxidation of different organic dyes like Rhodamine B (RB), Methyl orange (MO), Thymol blue (TB) and Bromocresol green (BG) under visible light (300-W Xe lamp; λ > 420 nm) showed that TiO₂ having 5 mol% of Fe₂O₃ (YFT1) is 3-5 times higher photoactive than that of P25 TiO₂. The XRD result did not show the peaks assigned to the Fe components (for example Fe₂O₃, Fe₃O₄, FeO₃, and Fe metal) on the external surface of the anatase structure in the Fe₂O₃/TiO₂ attained through mechanochemical treatment. This meant that Fe components were well incorporated into the TiO₂ anatase structure. The average crystallite size and particle size of YFT1 were found to be 12 nm and 30 ± 5 nm respectively measured from XRD and TEM conforming to nanodimensions. Together with the Fe component, they absorbed wavelength of above 387 nm. The band slightly shifted to the right without tail broadness, which was the UV absorption of Fe oxide in the Fe₂O₃/TiO₂ particle attained through mechanochemical method. This meant that Fe components were well inserted into the framework of the TiO₂ anatase structure. EPR and magnetic susceptibility show that Fe³⁺ is in low spin state corresponding to μ_B = 1.8 BM. The temperature variation of μ_B shows that Fe³⁺ is well separated from each other and does not have any antiferromagnetic or ferromagnetic interaction. The evidence of Fe³⁺ in TiO₂/Fe₂O₃ alloy is also proved by a new method that is redox titration which is again support by the XPS spectrum.     

Laser-induced enhancement of the surface hardness of nanoparticulate TiO2 self-cleaning layer

We here report that the abrasion resistance of nanoparticulate TiO₂ self-cleaning layers can be highly enhanced without a considerable loss of photocatalytic capability. TiO₂ coating layers solution-deposited onto the glass substrate were irradiated by a pulsed ultraviolet (UV) laser at 355 nm, which modified the surface morphologies via laser-induced local melting of TiO₂ nanoparticles. The surface hardness, measured by pencil scratch test, improved with increasing laser power (P). While an unmodified TiO₂ layer revealed a hardness of 6B, it increased to 2H after the surface was irradiated at P = 0.3 W. Almost all of the stearic acid deposited on an unmodified sample disappeared after UV exposure for 12 h. The photocatalytic decomposition was slowed down on laser-irradiated TiO₂ surfaces and this is attributed to the reduction of specific surface areas as a result of the morphological modifications. However, a TiO₂ layer hardened to 2H still exhibited fairly good photocatalytic activity, decomposing more than 75% of the stearic acid after exposure for the same duration.     

N-doped TiO2/ZnO composite powder and its photocatalytic performance for degradation of methyl orange

The N-doped TiO₂/ZnO composite powder with a molar ratio of Ti to Zn of 3/1 was prepared via sol–gel process and then ammonia treated with NH₃ mass fractions of 0%, 7%, and 28% for 24 h at room temperature followed by thermal calcinations in air for 2 h at various temperatures of 500, 600, and 700 °C. The as-prepared composite powder was characterized in detail through thermo-gravimetric analyzer, X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and high-resolution transmission electron microscopy. The results showed that the phase transformation of anatase to rutile has been successfully retarded via the ammonia treating process, leading to the presence of anatase phase in the composite. The particle crystallization of the composite powder was significantly promoted with the increase of the calcining temperature. The photocatalysis evaluation through MO degradation revealed an enhanced photocatalytic activity for the composite powder that might be related to the good crystallization, the presence of anatase phase, and the particle size reduction of the powder.     

Efficient dual functionality of highly porous nanocomposites based on TiO2 and noble metal particles

Porous nanocomposites based on TiO₂ aerogels and Au and, respectively, Ag particles were synthesized and their dual functionality to decontaminate water, via photocatalysis, and to detect low concentrations of pollutants from water, via SERS technique, was evaluated using model pollutants. The apparent photodegradation rate constants of a standard pollutant molecule revealed a considerable improvement of the composites photocatalytic performances (even better than one order of magnitude) in comparison with the commercial product Degussa P25. The essential role of the contact between TiO₂ and Au nanoparticles was demonstrated and the potential of all synthesized porous composites for photocatalytic experiments with visible light was pointed out. The lowest concentrations of contaminants adsorbed on the noble metal particles detectable by SERS were found to depend on the composite and pollutant species type and were determined to be between 10⁻³ and 5 × 10⁻⁶ M, and 10⁻⁸ and 10⁻¹⁰ M for off and under resonant excitation, respectively. The morphological (BET, pore size distribution, TEM) and structural (Raman, XRD, diffuse reflectance) particularities of the obtained porous composites were also discussed.     

Characteristics of N-doped TiO2 nanotube arrays by N2-plasma for visible light-driven photocatalysis

N-doped TiO₂ nanotube arrays were prepared by electrochemical anode oxidation of Ti foil followed by treatment with N₂-plasma and subsequent annealed under Ar atmosphere. The morphologies, composition and optical properties of N-doped TiO₂ nanotube arrays were characterized using field-emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction spectrometer (XRD), Photoluminescence (PL) and UV-vis diffusion reflection spectroscopy (UV-vis DRS). Methylene blue (MB) solution was utilized as the degradation model to evaluate the photocatalytic activity of the samples under visible light irradiation. The results suggested N₂-plasma treatment created doping of nitrogen onto the surface of photoelectrodes successfully and the N-doped TiO₂ nanotube arrays display a significantly enhancement of the photocatalytic activity comparing with the pure TiO₂ nanotube arrays under the visible light irradiation.     

Modification of Parylene film-coated glass with TiO2 nanoparticles and its photocatalytic properties

A titania film was deposited on Parylene-coated glass by a one-step, ultrasound-assisted procedure. The TiO₂ nanoparticles formed during the sonochemical hydrolysis of Ti(i-OPr)₄ were thrown to the surface and strongly attached to the Parylene substrate. By using different solvents (water, ethanol or their mixture) and reagent concentrations, the thickness, uniformity and crystallinity of the deposited layer were regulated. PVP was used to stabilize the highly homogeneous distribution of TiO₂ nanocrystals on the Parylene surface. The morphology and structure of the coated films were characterized by physical and chemical methods such as: X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), Rutherford backscattering spectrometry (RBS), and optical spectroscopy. The photocatalytic activity of the titania-modified Parylene film in the photo discoloration of methylene blue was demonstrated. The experimental results revealed a correlation between the uniformity of the nanostructured anatase titania film and its photocatalytic properties.     

Fe3O4/SiO2/Bi2WO6磁性复合光催化剂的制备及其光催化性能

钨酸铋(Bi₂WO₆),结构最简单的Aurivillius相化合物,是近期受到研究者关注的新型光催化材料。然而,光催化剂粉末在反应介质中难被回收,工业化应用成本较高。本文用三步方法合成了可回收的Fe₃O₄/SiO₂/Bi₂WO₆磁性复合光催化剂,通过溶剂热法合成具有磁性的Fe₃O₄,用溶胶凝胶法在Fe₃O₄表面覆盖SiO₂层,后将磁性颗粒与Bi₂WO₆纳米片相结合。光催化剂的形貌结构及性能通过XRD、SEM、PL、UV-vis进行表征测试。结果表明,直径约500 nm的Fe₃O₄微球附着在边长约500 nm的Bi₂WO₆纳米片的表面,SiO₂在两者之间起到了粘连作用。光催化剂Fe₃O₄/SiO₂/Bi₂WO₆对于罗丹明B的光降解活性较好,且有一定磁性,可以通过外加磁场将其从溶液中分离,有较大的应用潜力。     

Effects of heat treatment scheme on the photocatalytic activity of TiO2 nanotube powders derived by a facile electrochemical process

TiO₂ nanotubes (NTs) in powder form were synthesized by a facile electrochemical process in a perchlorate-containing electrolyte. Transmission electron microscopy results indicate that the TiO₂ NT-powder is in an amorphous structure and has outer diameter of 20 nm and tube-wall thickness of 5 nm. X-ray diffraction analysis reveals that phase composition of the annealed TiO₂ NT-powders is related to the heat treatment scheme. Methyl orange was employed as a representative dye pollutant to evaluate the ultraviolet photocatalytic activity of the TiO₂ NT-powders. It was found that different post heat treatment schemes affect greatly the photocatalytic activities of the TiO₂ NT-powders, which should be ascribed to the changes in phase structural and morphological properties of the TiO₂ NT-powders. These results indicate that there should be a balance between crystal phase and nanotubular configuration for achieving the best photocatalytic activity of the TiO₂ nanotube powders.     

Microstructure characterization and photocatalytic activity of mesoporous TiO2 films with ultrafine anatase nanocrystallites

A series of mesoporous TiO₂ films on borosilicate glass with ultrafine anatase nanocrystallites were successfully synthesized using a non-acidic sol gel preparation route, which involves the use of nonionic surfactant Tween 20 as template through a self assembly pathway. The microstructure of these TiO₂ films was characterized by XRD, SEM, HR-TEM, UV-Vis spectroscopy, and N₂ adsorption-desorption isotherm analysis. Their photocatalytic activities were investigated by using creatinine as a model organic contaminate in water. It was found that all mesoporous TiO₂ films prepared with Tween 20 exhibited a partially ordered mesoporous structure. The photocatalytic activity of the TiO₂ films could be remarkably improved by increasing Tween 20 loading in the sol at the range of 50% (v/v), which yielded large amount of catalyst (anatase) on the glass support and enhanced specific surface area. The optimum Tween 20 loading was 50% (v/v) in the sol, above which good adhesion between TiO₂ films and borosilicate glass could not be maintained. The final TiO₂ film (Tween 20: final sol = 50%,v/v) exhibits high BET surface area (∼ 120 m²/g) and pore volume (0.1554 cm³/g), ultrafine anatase nanocrystallinity (7 nm), uniform and crack free surface morphology, and improved photocatalytic activity.     

Preparation of large scale photocatalytic TiO2 films by the sol-gel process

Nanocrystalline titanium dioxide films were formed on frosted and clear borosilicate glass with a large surface area (12 × 22 cm) using doctor blade and spray coating techniques. The films were subjected to a high temperature treatment at 550 °C. X-ray diffraction (XRD) analysis indicated that the TiO₂ films contain only the anatase phase. Optical microscopy was used to determine the morphology changes after the deposition of each layer. Scanning electron microscopy (SEM) was used to study the films surface morphology. The large scale TiO₂ films produced showed a high photocatalytic activity which was evaluated by the degradation of methyl orange (MO) in aqueous solution (10 mg L^− 1) under illumination of a UV light source with an overall irradiance of 0.9 mW cm^− 2. UV-visible spectrophotometry was used to monitor the degradation of MO through the decrease of the main absorbance peak at 464 nm. The results demonstrated that a complete decomposition of MO could be achieved after 2 h of UV irradiation.     

Characterization of sol-gel synthesised lead-free (1 − x)Na0.5Bi0.5TiO3-xBaTiO3-based ceramics

The crystal structure, microstructure, dielectric and ferroelectric properties of (1 − x)Na_0.5Bi_0.5TiO₃-xBaTiO₃ ceramics with x = 0, 0.03, 0.05, 0.07 and 0.1 are investigated. A structural variation according to the system composition was investigated by X-ray diffraction (XRD) analyses. The results revealed that the synthesis temperature for pure perovskite phase powder prepared by the present sol-gel process is much lower (800 °C), and a rhombohedral-tetragonal morphotropic phase boundary (MPB) is found for x = 0.07 composition which showing the highest remanent polarization value and the smallest coercive field. The optimum dielectric and piezoelectric properties were found with the 0.93Na_0.5Bi_0.5TiO₃-0.07BaTiO₃ composition. The piezoelectric constant d₃₃ is 120 pC/N and good polarization behaviour was observed with remanent polarization (P_r) of 12.18 pC/cm², coercive field (E_c) of 2.11 kV/mm, and enhanced dielectric properties ?_r > 1500 at room temperature. The 0.93Na_0.5Bi_0.5TiO₃-0.07BaTiO₃-based ceramic is a promising lead-free piezoelectric candidate for applications in different devices.     

Electrodeposition of sol-enhanced nanostructured Ni-TiO2 composite coatings

A novel electroplating method has been developed to produce nanocrystalline metal-matrix nano-structured composite coatings. A small amount of transparent TiO₂ sol was added into the traditional electroplating Ni solution, leading to the formation of nanocrystalline Ni-TiO₂ composite coatings. These coatings have a smooth surface. The Ni nodules changed from traditional pyramid-like shape to spherical shape. The grain size of Ni was also significantly reduced to the level of 50 nm. It was found that the amorphous anatase TiO₂ nano-particles (∼ 10 nm) were highly dispersed in the coating matrix. The microhardness was significantly increased from 320 HV₁₀₀ of the traditional Ni coating to 430 HV₁₀₀ of the novel composite coating with 3.26 wt.% TiO₂. Correspondingly, the wear resistance of the composite coating was improved by ∼ 50%.     

Controlled synthesis of TiO2 mesoporous microspheres via chemical vapor deposition

Anatase titanium dioxide (TiO₂) mesoporous microspheres with core-shell and hollow structure were successfully prepared on a large scale by a one-step template-free chemical vapor deposition method. The effects of various reaction conditions on the morphology, composition and structure of the products were investigated by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) technique and photoluminescence (PL) method. The results indicate that the product near the source was composed of core-shell structure TiO₂ microspheres with diameters from 3 to 5 μm. With increasing the distance between the source materials and the substrate, the hollow TiO₂ spheres with 1-2 μm dominant the products. A localized Ostwald ripening can be use to explain the formation of core-shell and hollow structures, and the size of the initial TiO₂ solid nanoparticles plays an important role in determining the evacuation manner of the solid in the ripening-induced hollowing process. The surface area of TiO₂ hollow microspheres determined by the adsorption isotherms was measured to be 74.67 m²/g. X-ray photoelectron spectroscopy (XPS) analysis revealed that the O-H peaks of hollow structures have a chemical shift compared with the core-shell structures. The optical property of the products was also discussed.     

Amphiphilic and photocatalytic behaviors of TiO2 nanotube arrays on Ti prepared via electrochemical oxidation

Amphiphilic TiO₂ nanotube arrays (TiO₂ NTs) were fabricated through electrochemical oxidation of Ti in solution containing H₃PO₄ and NaF. Scanning electron microscopic analysis shows that the as-prepared TiO₂ NTs have an average pore diameter of 100 nm and a wall thickness of 15 nm. The electrochemical oxidation of Ti can be divided into four stages. In the first stage, when the potential is very low, oxygen formation and Ti dissolution are the major reactions. The second stage corresponds to a slightly higher potential, but less than 2.5 V. In this stage, the formation of TiO₂ film occurs. When the potential is increased to the even higher range from 2.5 V to 6 V, the TiO₂ film dissolves and nanoporous surface structure is generated. This is the third stage. Further increase of the potential enters stage four. The high potentials cause the self-organization of the nanostructure and allow the formation of well-aligned TiO₂ NTs. We also found that the change in surface condition of Ti by annealing heat treatment affects the film dissolution kinetics. As compared with TiO₂ thin film, the TiO2 NTs show higher photocatalytic activity on decomposing Rhodamine B. The surface of the TiO₂ NTs can be wetted by both water and oil. Such an amphiphilic property comes from the capillary effect of the nanochannel structure of the TiO₂ NTs. Because of the amphiphilic property and the photocatalytic activity, we conclude that the TiO₂ NTs have the capability of self-cleaning.     

Low temperature growth of nanocrystalline TiO2 films with Ar/O2 low-field helicon plasma

TiO₂ thin films were deposited on silicon wafer substrates by low-field (1 < B < 5 mT) helicon plasma assisted reactive sputtering in a mixture of pure argon and oxygen. The influence of the positive ion density on the substrate and the post-annealing treatment on the films density, refractive index, chemical composition and crystalline structure was analysed by reflectometry, Rutherford backscattering spectroscopy (RBS) and X-ray diffraction (XRD). Amorphous TiO₂ was obtained for ion density on the substrate below 7 × 10¹⁶ m^− 3. Increasing the ion density over 7 × 10¹⁶ m^− 3 led to the formation of nanocrystalline (~ 15 nm) rutile phase TiO₂. The post-annealing treatment of the films in air at 300 °C induced the complete crystallisation of the amorphous films to nanocrystals of anatase (~ 40 nm) while the rutile films shows no significant change meaning that they were already fully crystallised by the plasma process. All these results show an efficient process by low-field helicon plasma sputtering process to fabricate stoichiometric TiO₂ thin films with amorphous or nanocrystalline rutile structure directly from low temperature plasma processing conditions and nanocrystalline anatase structure with a moderate annealing treatment.     

Structural and dielectric properties of Bi2Zn2/3Nb4/3O7 thin films prepared by pulsed laser deposition at low temperature for embedded capacitor applications

Bi₂Zn_2/3Nb_4/3O₇ thin films were deposited on Pt/TiO₂/SiO₂/Si(1 0 0) substrates at a room temperature under the oxygen pressure of 1-10 Pa by pulsed laser deposition. Bi₂Zn_2/3Nb_4/3O₇ thin films were then post-annealed below 200 °C in a rapid thermal process furnace in air for 20 min. The dielectric and leakage current properties of Bi₂Zn_2/3Nb_4/3O₇ thin films are strongly influenced by the oxygen pressure during deposition and the post-annealing temperature. Bi₂Zn_2/3Nb_4/3O₇ thin films deposited under 1 Pa oxygen pressure and then post-annealed at a temperature of 150 °C show uniform surface morphologies. Dielectric constant and loss tangent are 57 and 0.005 at 10 kHz, respectively. The high resolution TEM image and the electron diffraction pattern show that nano crystallites exist in the amorphous thin film, which may be the origin of high dielectric constant in the Bi₂Zn_2/3Nb_4/3O₇ thin films deposited at low temperatures. Moreover, Bi₂Zn_2/3Nb_4/3O₇ thin film exhibits the excellent leakage current characteristics with a high breakdown strength and the leakage current density is approximately 1 × 10⁻⁷ A/cm² at an applied bias field of 300 kV/cm. Bi₂Zn_2/3Nb_4/3O₇ thin films are potential materials for embedded capacitor applications.