Promotional effects of cerium doping and NOx on the catalytic soot combustion over MnMgAIO hydrotalcite-based mixed oxides

A series of MnMgA10 samples with different amounts of Ce doping were facilely prepared using coprecipitation method and their catalytic soot combustion activity was evaluated by temperature programmed oxidation reaction （TPO）. The methods of X-ray diffraction （XRD）, Brumauer-Emmett-Teller （BET）, H2-TPR, NO-TPO and in situ 1R were used to characterize the physio- chemical properties of these samples. Dopant Ce improved the soot combustion performance of MnMgA10 catalyst due to the en- hanced redox ability. Introduction of NOx led to the further increase of catalytic soot oxidation activity on these samples. Over Ce-containing samples, the catalytic activity was slightly decreased as the amount of dopant Ce increased in 02. Diftbrently, in NO＋O2, a certain amount of dopant Ce was much more favorable and excess amount of Ce resulted in a sharp drop of the catalytic soot combustion activity. Both NO： and nitrates were found to have great contributions to the effects of NOx on the soot combustion activity of Ce-doped catalysts. More NO2 was generated as dopant Ce increased. When appropriate amount of Ce was introduced, the as-formed NO2 was stored as bridging bidentate nitrate on Mn-Ce site, which was confirmed to have higher reactivity with soot than nitrite or monodentate nitrate on Mn and/or Ce sites. Overall, Mno.sMg2.sCeo.lAlo.90 was considered as the most potential catalyst for soot combustion.     

Novel Mn-Ce bi-oxides loaded on 3D monolithic nickel foam for low-temperature NH3-SCR de-NOx:Preparation optimization and reaction mechanism

This study explored the superior citrate method(CM)to synthesize Mn-Ce bi-oxides on 3 D monolithic Ni-foam(NF)catalysts for the selective catalytic reduction of NO by NH₃(NH₃-SCR).The 17 wt%Mn(7)Ce(3)O_x/NF(CM-17)catalyst shows the NO_xconversion of 98.7%at 175℃and 90%in the presence of 10 vol%H2 O.It is revealed that the combination of surface-active oxygen(formed by high-level oxygen vacancies)and strongly oxidized Mn4+species promots the Fast-SCR reactions,in which Mn4+species play a leading role in NH₃-SCR reaction,and the unsaturated Ni atoms and also Ce3+species promote electron exchange and thus improve the redox performance.The coexistence mechanisms of Fast-SCR reactions and E-R pathways are observed over Mn-CeO_x/NF catalyst,which may be promoted by the Br?nsted sites at low temperature.In addition,the heat resistance,stability,3 D monolithic porous structure and excellent physical properties of foam nickel provide a unique growth substrates for catalysts preparation and reaction sites for NO_xpurification.Therefore,industrial application of Mn-Ce bioxides loaded on 3 D monolithic is proposed to be achieved through reasonable preparation methods.     

Promotion effect of niobium on ceria catalyst for selective catalytic reduction of NO with NH3

The CeO₂, Ce–Nb–O_x and Nb₂O₅ catalysts were synthesized by citric acid method and the promotion effect of Nb on ceria for selective catalytic reduction (SCR) of NO with NH₃ was investigated. The catalytic activity measurements indicate that the mixed oxide Ce–Nb–O_x presents a higher SCR activity than the single oxide CeO₂ or Nb₂O₅ catalyst. In addition, the Ce–Nb–O_x catalyst shows high resistance towards H₂O and SO₂ at 280 °C. The Raman, X-ray photoelectron spectra and temperature programmed reduction with H₂ results indicate that the incorporation of Nb provides abundant oxygen vacancies for capturing more surface adsorbed oxygen, which provides a superior redox capability and accelerates the renewal of active sites. Furthermore, the Fourier transform infrared spectra and temperature programmed desorption of NH₃ results suggest that niobium pentoxide shows high surface acidity, which is partly retained in the Ce–Nb–O_x catalyst possessing a high content of Lewis and Brønsted acid sites. Therefore, the incorporation of Nb improves both the redox and acidic capacities of Ce–Nb–O_x catalyst for the SCR reaction. Here, the redox behavior is primarily taken on Ce and the acidity is well improved by Nb, so the synergistic effect should exist between Ce and Nb. In terms of the reaction mechanism, in situ DRIFT experiments suggest that both NH₃ on Lewis acid sites and NH₄⁺ on Brønsted acid sites can react with NO species, and adsorbed NO and NO₂ species can both be reduced by NH₃. In the SCR process, O₂ primarily acts as the accelerant to improve the redox and acid cycles and plays an important role. This work proves that the combination of redox and acidic properties of different constituents can be feasible for catalyst design to obtain a superior SCR performance.     

Effects of cerium and tungsten addition on acid–base properties of spindle-like α-Fe2O3 in low-temperature SCR of NOx with NH3

Low-temperature selective catalytic reduction (SCR) is important for the elimination of NO_x from stationary sources. In the present study, the loading of Ce and W on α-Fe₂O₃ was achieved through the integration of single-mode microwave and incipient wetness impregnation (IWI) methods. The scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images reveal that the structure of α-Fe₂O₃ is spindle-like, and the structure remains unchanged after the introduction of Ce and/or W. The results of NH₃-SCR investigation demonstrate that NO_x conversion over Ce–W/α-Fe₂O₃ is more than 85% at 300 °C, which is much higher than that over Ce/α-Fe₂O₃ and α-Fe₂O₃. Our studies illustrate that the addition of Ce can significantly increase the amount of surface oxygen vacancies as well as sites of moderate basicity. On the other hand, the addition of W can obviously decrease the amount of basic sites and increase the number of Brønsted acid sites. The synergistic effect of Ce and W addition on balancing acidity/basicity properties accounts for the high activity of Ce₂₀W₁₀/α-Fe₂O₃ for NO_x removal at low temperatures. The study provides insight into the relationship between acidity/basicity properties and catalytic performance of Ce–W/α-Fe₂O₃ catalysts, which is beneficial to the design of high-performance NH₃-SCR catalyst for NO_x removal at low temperatures.     

In-situ DRIFT assessment on strengthening effect of cerium over FeO_x/TiO_2 catalyst for selective catalytic reduction of NO_x with NH_3

Fe-based catalysts have a great potential to be used for selective catalytic reduction(SCR) of NO_x with NH3 reaction due to their low cost,nontoxicity and excellent catalytic activity.The aim of this paper is to investigate Ce doping effect on activity of NH_3-SCR over the FeO_x/TiO_2 catalyst.In-situ diffuse reflectance infrared fourier transform(DRIFT) technology was utilized to verity the adsorbed species on the surface of FeO_x/TiO_2 and FeO_x-CeO_2/TiO_2 catalysts.With respect to the obtained results,among the four catalysts studied,the FeO_x-CeO_2/TiO_2 with the FeO_x/CeO_2 ratio of 3/8 shows the best NO conversion more than 98%in the temperature range of 230—350℃,The active centers for NH_3 adsorption and activation are assigned to Lewis acid sites over the FeO_x-CeO_2/TiO_2 and monodentate nitrates can act as the key intermediate in the NH3-SCR.Moreover,both of Langmuir-Hinshelwood and Eley-Rideal mechanisms are observed over the FeO_x-CeO_2/TiO_2 catalysts in the SCR.     

Comparative study of La_(1-x)Ce_xMnO_(3+δ) perovskites and Mn-Ce mixed oxides for NO catalytic oxidation

A series of La_(1-x)Ce_xMnO_(3+δ)(x=D,0.05,0.1,0.2,and 0.3) perovskites and Mn-Ce mixed oxides were prepared.Their physico-chemical properties were systematically characterized and the NO oxidation activities of the catalysts were investigated.The La_(0.9)Ce_(0.1)MnO_(3+δ) has the best activity among all of the catalysts,with a maximum NO conversion of 85% at 300℃.The characterization results indicate that the doping of Ce improves the properties of the perovsidtes in terms of the specific surface area,the average valence state of Mn ions,the number of reactive oxygen species and the NO_x desorption behaviors.The Mn-Ce mixed oxide calcined at 500℃ shows a similar NO oxidation activity with La_(0.9)Ce_(0.1)MnO_(3+δ).However,the activity of the mixed oxide obtained at 750℃ decreases a lot,which results from the loss of active sites and active oxygen species.     

Core-shell MnCeOx catalysts for NO oxidation and mild temperature diesel soot combustion

Environmental contamination such as soot particles and NO_x has aroused extensive attraction recently.However,the main challenge lies in the oxidation of soot at mild temperature with the assistance of NO_x.Here,a series of core-shell MnCeO_x catalysts were successfully synthesized by hydrothermal method and employed for low-temperature catalytic oxidation of soot in the presence of NO_x.X-ray diffraction(XRD),inductively coupled plasma-optical emission sp...     

A novel material for passive NOx adsorber:Ce-based BEA zeolite

Passive NO_x adsorbers(PNAs) were proposed to address the NO_x emissions during the cold start phase.Here we show a novel Ce-based BEA zeolite,as a noble-metal-free passive NO_x adsorber.The NO_x adsorption capacity of Ce/BEA reaches 36 μmol/g in the feed gas close to realistic exhaust conditions,and the NO_x desorption temperature,which is around 290℃,is ideal for diesel exhaust after-treatment systems.Ce/BEA also behaves notable stability of hi...     

Influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 for NO reduction by CO

In order to investigate the influence of MnO2 modification methods on the catalytic performance of CuO/CeO2 catalyst for NO reduction by CO,two series of catalysts(xCuyMn/Ce and xCu/yMn/Ce) were prepared by co-impregnation and stepwise-impregnation methods,and characterized by means of X-ray diffraction(XRD),Raman spectra,H2-temperature programmed reduction(H2-TPR),in situ diffuse reflectance infrared Fourier transform spectra(in situ DRIFTS) techniques.Furthermore,the catalytic performances of these catalysts were evaluated by NO+CO model reaction.The obtained results indicated that:(1) The catalysts acquired by co-impregnation method exhibited stronger interaction owing to the more sufficient contact among each component of the catalysts compared with the catalysts obtained by stepwise-impregnation method,which was beneficial to the improvement of the reduction behavior;(2) The excellent reduction behavior was conducive to the formation of low valence state copper species(Cu+/Cu0) and more oxygen vacancies(especially the surface synergetic oxygen vacancies(SSOV,Cu+-□-Mn(4–x)+)) during the reaction process,which were beneficial to the adsorption of CO species and the dissociation of NO species,respectively,and further promoted the enhancement of the catalytic performance.Finally,in order to further understand the difference between the catalytic performances of these catalysts prepared by co-impregnation and stepwise-impregnation methods,a possible reaction mechanism(schematic diagram) was tentatively proposed.     

Effect of manganese and/or ceria loading on V_2O_5-MoO_3/TiO_2 NH_3 selective catalytic reduction catalyst

The effect of manganese and/or ceria loading of V_2 O_5-Mo_O_3/TiO_2 catalysts was investigated for selective catalytic reduction(SCR) of NO_x by NH_3.The manganese and/or ceria loaded V_2 O_5-MoO_3/TiO_2 catalysts we re prepared by the wetness impregnation method.The physicochemical characteristics of the catalysts were thoroughly characterized.The catalytic performance of 1.5 wt% V_2 O_5-3 wt% MoO_3/TiO_2(V1.5 Mo3/Ti) is greatly enhanced by addition of 2.5 wt% MnO_x and 3.0 wt% CeO_2(V1.5 Mo3 Mn2.5 Ce3/Ti) below450℃.Compared with the V1.5 Mo3/Ti catalyst with NO_x conversion of 75% at 275 ℃,V1.5 Mo3 Mn2.5 Ce3/Ti exhibits higher NO_x conversion of 84% with good resistance to SO_2 and H_2 O at a gas hourly space velocity value of 150000 h~(-1).The active manganese,cerium,molybdenum,and vanadium oxide species are highly dispersed on the catalyst surface and some synergistic effects exist among these species.Addition of MnO_x significantly enhances the redox ability of the cerium,vanadium,and molybdenum species.Addition of Ce increases the acidity of the catalyst.More active oxygen species,including surface chemisorbed oxygen,form with addition of Mn and/or Ce.Because of the synergistic effects,appropriate proportions of manganese in different valence states exist in the catalysts.In summary,the good redox ability and the strong acidity contribute to the high NH3-SCR activity and N2 selectivity of the V1.5 Mo3 Mn2.5 Ce3/Ti catalyst in a wide temperature range.And the V1.5 Mo3 Mn2.5 Ce3/Ti catalyst shows good resistance to H_2 O and SO2 in long-time catalytic testing,which can be ascribed to the highly sulfated species adsorbed on the catalyst.     

A novel ceria hollow nanosphere catalyst for low temperature NOx storage

In this work, a highly active CeO₂ catalyst with hollow nanosphere morphology for low temperature NO_x storage was prepared by a surfactant-assisted solvothermal reaction. The physicochemical properties of ceria samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N₂ adsorption–desorption, H₂-temperature programmed reduction (H₂-TPR), X-ray photoelectron spectroscopy (XPS) and in situ diffused reflectance infrared Fourier transform spectroscopy (DRIFTS). The as-prepared CeO₂ nanosphere possesses excellent NO oxidation capacity, smaller mesopores, better reducibility and more surface Ce³⁺ content. Compared with CeO₂ with nanorod and nanoparticle morphologies, CeO₂ nanosphere shows better intrinsic low temperature NO_x trapping performance, with a wide operating temperature window (150–300 °C), high NO_x adsorption capacity (NAC, 640–745 μmol/g) and high NO_x storage capacity (NSC, 250–350 μmol/g). Two reaction pathways are speculated for NO_x adsorption on CeO₂ nanosphere, including “nitrate route” and “nitrite route”. The thermally unstable surface nitrites formed on the CeO₂ nanosphere allow ceria to release more NO_x during the desorption process. The present work provides a new ceria morphology for NO_x traps, which may become a potential excellent NO_x storage material.     

Effects of cerium precursors on surface properties of mesoporous CeMnO_x catalysts for toluene combustion

Mesoporous CeMnOx composite oxides catalysts were prepared by surfactant-assisted co-precipitation method and used for the catalytic oxidation of toluene.The effect of different cerium precursors[Ce(NO_3)_3 and(NH_4)_2 Ce(NO_3)_6] on catalyst structure,surface properties and toluene combustion activities of mesoporous CeMnO_x catalysts were investigated.The Ce(Ⅲ)MnO_x catalyst prepared from Ce(NO_3)_3 precursor shows higher catalytic activity,with a 90% conversion temperature of 240℃,which is better than the Ce(Ⅳ)MnO_x catalyst derived from(NH_4)_2 Ce(NO_3)_6] precursor.On the basis of characterizations,it reveals that abundant surface content of Mn~(4+),better redox behavior and larger concentration of surface active oxygen species are responsible for the excellent catalytic performance.     

Ce–Ti catalysts modified with copper and vanadium to effectively remove slip NH3 and NOx from coal-fired plants

In this work, V/Ce–Ti catalysts were modified with different kinds of transition metals (Cu, Fe, Co, Mn) by sol–gel and impregnation methods. The NH₃ oxidation performance of them was tested to select the most active catalyst in NH₃-selective catalytic oxidation (NH₃–SCO). The effect of NO, SO₂ and H₂O was also investigated. The experimental results indicate that 1% Cu–V/Ce–Ti catalyst exhibits the most significant ability to remove slip ammonia discharged from coal-fired plants and its NH₃ conversion efficiency reaches 90% at 300 °C. In addition, 97% NO_x can be removed when NO is introduced in the gas. Cu–V/Ce–Ti catalyst also obtains good resistance to H₂O and SO₂. Based on the characterization experiment, the introduced Cu and V are highly dispersed on Ce–Ti catalyst and they can increase the redox properties and the number of acidic sites. Besides, the redox cycles among Cu, V and Ce species on Cu–V/Ce–Ti catalyst surface are conducive to generating more active oxygen and promoting the oxidation capacity of the catalyst.     

Effects of calcium substitute in LaMnO3 perovskites for NO catalytic oxidation

La1-x Cax MnO3 (x=0-0.3) perovskite-type oxides were synthesized by citrate sol-gel method. The physical and chemical properties were characterized by X-ray diffraction (XRD), Brumauer-Emmett-Teller method (BET), X-ray photoelectron spectroscopy (XPS), NO+O2 -TPD (temperature-programmed desorption), activated oxygen evaluation and H2 -TPR (temperature-programmed reduction) technologies. The results showed that NO catalytic oxidation activity was significantly improved by Ca substitution, especially for lower temperature activity. The La0.9 Ca0.1 MnO 3 sample showed the maximum conversion of 82% at 300 oC. The monodentate nitrates played a crucial role for the formation of NO2 . The reducibility of Mn 4+ ions and reactivity of activated oxygen were favorable for the catalytic performances of NO oxidation.     

Active oxygen species and oxidation mechanism over Ce-doped LaMn_(0.8)Ni_(0.2)O_3/hierarchical ZSM-5 in pentanal oxidation

Hierarchical ZSM-5(HZ) molecular sieves based on fly ash were synthesized using a method combining water heat treatment with step-by-step calcination.The coupling catalysts between La_(1-x)Ce_xMn_(0.8)-Ni_(0.2)O_3(x ≤ 0.5) perovskites and HZ were prepared through the impregnation method,which were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HRTEM),N_2 adsorption,X-ray photoelectron spectroscopy(XPS),NH_3-temperature programmed desoprtion(NH_3-TPD),H_2-temperature programmed reduction(H_2-TPR) and O_2-TPD techniques and investigated regarding pentanal oxidation at 120-390℃ to explore the effects of Ce doping on the catalytic activity and the active oxygen species of the coupling catalysts,meanwhile,the reaction mechanism and pathway of pentanal oxidation were also studied.The results reveal that Ce substitution at La sites can change the electronic interactions between all the elements and promote the electronic transfer among La,Ce,Ni,Mn and HZ,influencing directly the physicochemical characteristics of the catalysts.Moreover,the amount and transfer ability of surface adsorbed oxygen(O_2~-and O~-)regarded as the reactive oxygen species and the low temperature reducibility are the main influence factors in pentanal oxidation.Additionally,La_(0.8)Ce_(0.2)Mn_(0.8)Ni_(0.2)O_3/HZ exhibits the best catalytic activity and deep oxidation capacity as well as a better water resistance due to its larger amount of surface adsorbed oxygen species and higher low temperature reducibility.What's more,appropriate Ce substitution can significantly enhance the amount of O_2~-ions,which can distinctly enhance the catalytic activity of the catalyst,and moderate acid strength and appropriate acid amount can also facilitate the improvement of the pentanal oxidation activity.It is found that there is a synergic catalytic effect between surface acidity and redox ability of the catalyst.According to the in situ DRIFTS and GC/MS analyses,pentanal can be oxidized gradually to CO_2 and H_2 O by the surface oxygen species with the form of adsorption in air following the Langmuir-Hinshelwood(L-H) reaction mechanism.Two reaction pathways for the pentanal oxidation process are proposed,and the conversion of the formates to carbonates may be one of the main rate-determining steps.     

Promotional mechanism of activity of CeEuMnOx ternary oxide for low temperature SCR of NOx

Due to strong synergistic effect of the elements,a series of XEuMnO_x ternary oxides(X=Ce,Ni,Co,Sb,Sn,Mo) were synthesized by one-pot co-precipitation method,and composite components were identified and optimized to maintain high activity and superior SO₂ and H₂O endurance in selective catalytic reduction of NO_x with NH₃(NH₃-SCR).NO_x conversion of CeEuMnO_x ternary oxide catalysts attains more than 90% at 100-2...     

Study on catalytic combustion of benzene over cerium based catalyst supported on cordierite

A series of MnCeOx catalysts supported on cordierite honeycomb (Cord) were prepared by a combustion synthesis method using Mn(NO3)2 , Ce(NO3 )2·6H2O and citric acid. The effect of the molar ratio of Mn/Ce, calcination time, the amount of citric acid and the effect of water vapor on the catalytic properties for the complete oxidation of benzene were investigated. These catalysts were characterized by X-ray diffraction (XRD), H 2 temperature-programmed reduction (H2 -TPR), O2 temperature programmed desorption (O2 -TPD) and scanning electron microscopy (SEM) techniques. The results indicated that the MnCeOx /Cord catalyst with Mn/Ce molar ratio of 1:1, calcining for 7h and M n+ /(citric acid) molar ratio of 6 exhibited the highest catalytic activity. When the concentration of benzene was 1500 ppm and the gaseous hourly space velocity was 20000h -1 , the conversion of toluene was 99.1% at the reaction temperature of 300 oC.     

Synergetic catalytic removal of chlorobenzene and NOx from waste incineration exhaust over MnNb0.4Ce0.2Ox catalysts: Performance and mechanism study

Nb doped MnCe_0.2O_x complex oxides catalysts prepared via a homogeneous precipitation method were investigated for synergistic catalytic removal of NO_x and chlorobenzene (CB) at low temperatures. The MnNb_0.4Ce_0.2O_x catalyst with a molar ratio of Nb/Mn = 0.4 exhibits excellent activity and the NO_x and CB removal efficiency reaches 94.5% and 96% at 220 °C, respectively. Furthermore, the NO_x and CB removal efficiency of MnNb_0.4Ce_0.2O_x still remains above 80% after injecting 300 ppm SO₂ and 7 vol% H₂O for 36 h. In addition, the presence of CB and NO_x + NH₃ can improve the NO_x and CB removal efficiency of MnNb_0.4Ce_0.2O_x, respectively. The analysis results from N₂-BET, Py-IR, H₂-TPR and NH₃-TPD reveal that the introduction of Nb increases the average pore size, pore volume and surface area, promoted the growth of Lewis acid amount obviously, and enhances redox ability of MnCe_0.2O_x at 100–250 °C. Moreover, the molecular migration process of NO_x, NH₃, CB and SO₂ in NH₃-SCR and CB oxidation reaction over MnNb_0.4Ce_0.2O_x catalysts were systematically studied. In situ DRIFTS, FT-IR and XPS also confirm that the adsorption of sulfate species and SO₂ on the surface of MnNb_0.4Ce_0.2O_x is inhibited effectively by the introduction of Nb in the presence of SO₂ and H₂O. Moreover, Nb additives also enhance the structural stability of MnNb_0.4Ce_0.2O_x, due to the interactions among Mn, Nb and Ce. The NH₃-TPD, H₂-TPR and in situ DRIFTS results also confirm that the MnNb_0.4Ce_0.2O_x still retains abundant acid sites and high redox ability in the presence of SO₂ and H₂O. In summary, MnNb_0.4Ce_0.2O_x catalysts represent a promising and effective candidate for controlling NO_x and CB at low temperatures.     

Enhancing low-temperature NH3-SCR performance of Fe–Mn/CeO2 catalyst by Al2O3 modification

In the work, supported catalysts of FeO_x and MnO_x co-supported on aluminum-modified CeO₂ was synthesized for low-temperature NH₃-selective catalytic reduction (NH₃-SCR) of NO. Impressively, the SCR activity of the obtained catalyst is markedly influenced by the adding amount of Al and the appropriate Ce/Al molar ratio is 1/2. The activity tests demonstrate that Fe–Mn/Ce1Al2 catalyst shows over 90% NO conversion at 75–250 °C and exhibits better SO₂ resistance compared to Fe–Mn/CeO₂. Fe–Mn/Ce1Al2 shows the expected physicochemical characters of the ideal catalyst including the larger surface and increased active reaction active sites by controlling the amount of Al doping. Also, the better catalytic activity is well correlated with the present advantaged surface adsorption oxygen species, Mn⁴⁺ species, Ce³⁺ species and the enhanced reducibility of Fe–Mn/Ce1Al2, which is superior to the Fe–Mn/CeO₂ catalyst. More importantly, we further demonstrate that the amount and strength of surface acid sites are improved by Al-doping and more active intermediates (monodentate nitrate) is generated during NH₃-SCR reaction. This work provides certain insight into the rational creation of simple and practical denitration catalyst environmental purification.     

Construction of bimetallic Pt-Pd/CeO2-ZrO2-La2O3 catalysts with different Pt/Pd ratios and its structure-activity correlations for three-way catalytic performance

A series of Pt-Pd bimetallic catalysts supported on CeO₂-ZrO₂-La₂O₃ mixed oxides were synthesized through the conventional impregnation method.Three-way catalytic performance evaluations along with detailed physio-chemical characterizations were carried out to establish possible structure-activity correlations.Results show that on the one hand,different Pt/Pd ratios can strongly affect the TWC behaviors of Pt-Pd/CZL catalysts by modulating the synergis...