多路径传输控制协议技术综述

随着互联网的应用发展,用户对带宽的需求日益增大。同时,伴随着宽带接入技术的发展,终端可以同时具有多条网络链接,然而传统传输控制协议(TCP)采取单路通信,因而造成资源浪费。为此,IETF专门提出了多路径TCP(MPTCP)来实现TCP的多路传输,从而提高链路利用率和协议鲁棒性。本文对国内外MPTCP的最新研究成果进行了总结,包括MPTCP的体系结构、路由和拥塞控制等内容,可为国内研究者进一步深入研究提供参考。     

多源协作的传输控制机制

多路径传输控制协议（Multipath Transmission Control Protocol,MPTCP）是传输控制协议的一种扩展,实现端到端动态地利用多个地址建立多条传输路径,从而提高网络传输质量和可靠性.但是,MPTCP仍存在局限,能够解决端到端已确定的多路径调度问题,但难以实现不同端以及变化端间的路径协作.智慧协同网络是一种新型的未来网络体系,其核心思想是通过网络组件的智慧协作,最大限度优化利用网络资源,提高网络工作效率.本论文提出了基于智慧协同网络的多源协作传输控制机制,实现了传输控制协议从单源多路径向多源多路径的突破.具体来说,首先刻画了一种智慧协同网络的多源协作传输架构,引入子源协作传输方法,并详细介绍了多源协作机制的理论模型、报文格式以及子源协作管理的核心工作流程.通过仿真实验验证,多源协作传输控制机制能够将拥塞窗口平均利用率从51%提升至96%,并提高网络利用率和吞吐量.     

一种基于链路传输延迟的MPTCP拥塞控制算法*

由于传统TCP拥塞控制算法直接应用到MPTCP(Multipath Transport Control Protocol)中存在公平性问题,以及不能有效地发挥多路径传输的优势,因而从公平性方面对MPTCP现有拥塞控制算法进行研究.研究发现,现有的MPTCP拥塞控制算法均受到相同的回路时间限制.提出一种基于链路延迟的RTT补偿算法(Compensating for RTT mismatch,C-RTT ).该算法通过设置网络带宽占用比参数以及对MPTCP连接的子流设置侵略因子,从而保证瓶颈链路处MPTCP数据流和TCP数据流公平地共享可用带宽.最后通过NS3仿真实验证明,该算法能够有效地补偿链路中因RTT不等引起的公平性问题,并避免链路之间数据的非周期抖动,且保证了多路径传输的优越性.     

基于快速链路动态感知的多路分流算法

多路并行传输技术的发展为解决实时视频低延时、高画质的业务需求提供了一种方法。现有的多路并行传输技术在某一路径发生丢包时，往往无法通过快速切换等手段，及时地将拥塞链路上的数据包进行重传或分流，如多路径传输协议(MPTCP)的快速重传机制需要三个相同的反馈数据包，无法保证实时视频的流畅性。为解决该问题，设计了一种基于用户数据报协议(UDP)的多路并行传输框架，并针对该框架提出了基于快速链路动态感知的多路分流算法。该算法综合考虑数据包到达特性，对链路网络状态进行建模，快速地感知链路状态并动态地调整链路重传切换时间。仿真结果表明，相比于超时判断分流决策，该算法能更准确地感知链路的质量和性能，并根据算法结果做出合理的数据分发决策，有效提升多路并行传输的性能，降低重传数据端到端时延，提高网络利用率。     

多路径环境下电信流量模型研究

在下一代通信网络中,一个终端可同时拥有多个网络接口,在一对源、目的终端间存在多条可用路径。这为网络通信提供了一种全新的思路,即利用多条路径并发进行数据传输。针对多路径传输出现的问题,文章为多路径传输建立了流量模型,分析了多路径传输流媒体的优势,提出了＂流体带宽＂和＂流体调度＂的概念,并引入网络流理论计算了多路径环境下的目标流量。     

多路径TCP拥塞控制算法研究

首先介绍了多路径传输协议的几种典型的拥塞控制算法,然后对MPTCP协议进行了理论分析,包括MPTCP拥塞控制算法在瓶颈链路TCP公平性、平衡拥塞能力以及flap现象,实验分析表明LINKED INCREASES算法效果最好。最后,指出其存在的问题,并指出了进一步的研究方向。     

基于异构无线网络的多路径传输

针对异构无线网络环境中,大容量业务传输质量不可靠、网络资源利用率低的问题,提出了一种基于异构无线自组织网络的多路径传输路由算法。该算法有效避免了单路通信方式下的传输链路拥塞、吞吐量低等问题,并结合大容量业务的特点,通过一定的法则合理表征网络环境信息,依据表征结果提出发端到终端的多路径策略,使得重要性不同的业务可选择相应链路质量的路径进行并行传输,避免了网络中的每个自组网节点独立寻找路由导致的源节点难以获得中间节点路由信息的现象。仿真结果表明,该算法可实现整个网络负载均衡,缓解网络链路拥塞,有效降低传输中的丢包率,降低传输时延。     

传输延迟感知的多路径并发差异化路径数据分配算法

针对多路径并发传输模型的整体性能在部分通信路径性能突变时会急剧下降的多种原因进行分析,选取对性能影响最大的因素(传输延迟)进行了优化,提出了一种针对多路径并发传输模型的传输延迟感知的路径数据分配算法。通过结合各条通信路径的实际传输延迟来分配多条通信链路的数据发送量,以及各条路径上发送的数据分组序号,减少路径性能恶化对多路径并发传输模型整体性能带来的影响。分析和实验结果表明,本算法能够相对默认的轮询数据分配算法取得较好的运行性能。     

无蜂窝大规模MIMO中基于深度强化学习的无人机辅助通信与资源调度

无蜂窝大规模多入多出(MIMO)网络中分布式接入点(AP)同时服务多个用户,可以实现较大区域内虚拟MIMO的大容量传输;而无人机辅助通信能够为该目标区域热点或边缘用户提供覆盖增强.为了降低反馈链路负载,并有效提升无人机辅助通信的频谱利用率,该文研究了基于AP功率分配、无人机服务区选择和接入用户选择的联合调度;首先将AP...     

流与路径绑定的并行多路径SCTP的设计与实现

随着通信终端上多个网络接口的实现成为可能,并行多路径传输因其具有较高的传输效率而成为研究的热点。本文设计实现了一种SCTP流与路径绑定的并行多路径传输解决方案,将不同的流映射到合适的路径上进行传输,从而解决多路径接收端数据分组乱序的问题,提高网络传输的吞吐量。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.