共查询到20条相似文献,搜索用时 109 毫秒
1.
2.
正交层合板压缩条件下平均层间剪应力计算 总被引:1,自引:0,他引:1
根据正交层合板在压缩载荷作用下的泊松效应和变形协调原理,分析了平均层间剪应力的产生机制,并建立了平均层间剪应力的解析模型。算例分析表明纵横铺层比k=1时,层间剪应力最大,k值大于3时可有效降低层间剪应力;层间剪应力与平均压应力和受压截面宽厚比成正比关系,需要根据实际情况选取合适的k值和厚宽比以有效降低平均层间剪应力。 相似文献
3.
4.
复合材料泊桑比的设计及断裂特性 总被引:4,自引:3,他引:4
本文命同计算复合材料层同内泊桑比的公式,编制了计算机程序,得到了各向异性度E1/E2、铺层角与泊桑比关系的曲线图,并进行了实验验证。最后对不同泊桑比复合的力学性能进行实验比较。 相似文献
5.
本文推导了同时计算对称复合材料层板面内和厚度方向泊桑比的计算公式,其计算结果与其它文献的计算结构完全一样,且与实验值符合得很好,最后分析了央内泊桑比和厚度方向泊桑比的关系。 相似文献
6.
将累积损伤过程运用于固定订购时间间隔模型中,把订单的出现看成库存系统受到的冲击,把订单产生的随机需求量看成给库存系统的冲击带来的损伤,以求得最低期望单位时间成本为目标,建立C(T,K)成本模型,最后用一个算例展示了当成本最低时的最优订购时间间隔和初始库存水平。 相似文献
7.
8.
9.
尼泊金辛酯和异丙酯合成方法的研究 总被引:8,自引:0,他引:8
研究了各种因素对制备尼泊金辛酯,异丙酯产率的影响,筛选出最佳反应条件可使辛酯的收率达96%,异丙酯的收率达82%,用GC-MS计确定了异丙酯酯化应的副产物的结构,并提出了生成该副产物的反应机理。 相似文献
10.
紫砂陶艺与中国传统松文化的结合,堪称紫砂史上的伟大创新.它的出现,天才地把中国松文化极其有机地融合到小小一把壶上.可以说,正是陶艺者奠定了紫砂壶与松文化相结合的坚实基础,开辟了工艺品与高雅艺术相交融的广阔天地.本篇以紫砂“青松壶”的制作工艺,谈谈松文化在紫砂壶艺里的应用. 相似文献
11.
分析《编译原理》中三个重要的知识点,一是编译过程;二是编译器的设计;三是编译器中所用到的数据结构。并通过一个例子说明了这个观点。 相似文献
12.
合理运用CAI课件优化课堂教学过程 总被引:1,自引:0,他引:1
电子计算机技术的发展与应用,特别是CAI课件(计算机辅助教学)的开发、研究和应用,引起教育技术的第四次革命。CAI课件在教学中的合理应用,对于提高学生的学习兴趣,激励学生主动参与学习的全过程,培养数学能力,发展智力以及突出教材的重难点,提高课堂教学效率等方面都有积极作用。 相似文献
13.
HAN Hong-mei 《煤炭加工与综合利用》2014,(8):I0001-I0001
the paper firstly summarizes the project process of China coal deep processing industry, including coal-to-natural gas, coal-to-oil, coal-to-olefin, coal-to-glycol, coal-to-arene, coal-to-methanol, coal-to-nitrogenous fertilizer, coal-to-calcium carbide, coke and other businesses, and then analyzes the development situation of coal deep processing industry in China from 7 aspects, thereby pointing out the develop priorities of China coal deep processing industry. 相似文献
14.
本文讨论了操作系统进程并发管理中的同步和互斥问题,并在分析的基础上引入P、V原语,用来描述进程操作。为了说明问题,分别给出了用P、V原语描述进程同步和互斥的典型实例。 相似文献
15.
基于“工作过程”的探究式中职计算机教学法研究 总被引:3,自引:0,他引:3
本文从当前中职计算机教学的问题出发,提出一种基于“工作过程”的探究式中职计算机教学法,经课堂教学证实,该方法有效,对当前中职教育具有指导意义。 相似文献
16.
17.
MA Beiyue LI Ying LU Zhongxin YU Jingkun 《中国耐火材料》2014,(4):45-48
ZrN-SiAlON composite materials were synthesized at 1 550 ℃ for 6 h via a carbothermal reduction nitridation route using fly ash (≤74 μm),zircon (≤ 44 μm) and active carbon as starting materials.The processed ZrN-SiAlON composite micropowders were mixed with polyvinyl alcohol as binder to prepare ZrN (ZrON)-SiAlON composite ceramics by carbon-embedded pressureless firing at 1 450,1 500 and 1 550 ℃ for 1 h,respectively.Influences of firing temperature on the phase compositions,microstructure and sintering properties of the ceramics were investigated.The results show that:(1) β-SiAlON based composite ceramics with different compositions can be prepared by controlling firing temperature,and the main crystalline phases of the specimen fired at 1 550 ℃ for 1 h involve ZrN,ZrON and β-SiAlON (z =2,Si4Al2O2N6); (2) ZrN (ZrON),β-SiAlON and a Fe-Si based compound can be observed in the microstructures of the specimens fired at different temperatures.ZrN (ZrON) particles distribute homogeneously in the β-SiAlON matrix; (3) raising firing temperature can increase the shrinkage ratio of the ceramics,and the volume shrinkage ratio increases from 19.4% to 40.3% when the firing temperature rises from 1 450 to 1 550 ℃. 相似文献
18.
19.