一种紧凑的GaN高电子迁移率晶体管大信号模型拓扑

GaN高电子迁移率晶体管（HEMT）以其复杂的器件特性使其大信号建模变得十分困难,尽管EEHEMT、Angelov等模型结构曾经成功应用于GaAs HEMT/MESFET的大信号模型,但当它们被用于GaN HEMT建模时却不再准确和完备.面向GaN HEMT器件的大信号模型,本文提出了一种紧凑的模型拓扑,此模型拓扑综合了GaN HEMT器件的直流电压-电流（I-V）特性、非线性电容、寄生参数、栅延迟漏延迟与电流崩塌、自热效应以及噪声等特性.经验证此模型拓扑在仿真中具有很好的收敛性,适用于GaN HEMT器件的大信号模型的建立,满足GaN基微波电路设计对器件模型的需求.     

蓝宝石衬底上AlGaN/GaN HEMT自热效应研究

建立了包含“自热效应”的A lG aN/G aN HEM T(高电子迁移率晶体管)直流I-V特性解析模型。从理论的角度分析了自热效应对A lG aN/G aN HEM T器件的影响,并同已有的实验结果进行了对比,符合较好。证明基于这种模型的理论分析适于A lG aN/G aN HEM T器件测试及应用的实际情况。     

Optimization of the parameters of HEMT GaN/AlN/AlGaN heterostructures for microwave transistors using numerical simulation

The numerical simulation, and theoretical and experimental optimization of field-effect microwave high-electron-mobility transistors (HEMTs) based on GaN/AlN/AlGaN heterostructures are performed. The results of the study showed that the optimal thicknesses and compositions of the heterostructure layers, allowing high microwave power implementation, are in relatively narrow ranges. It is shown that numerical simulation can be efficiently applied to the development of microwave HEMTs, taking into account basic physical phenomena and features of actual device structures.     

AlN阻挡层对AlGaN/GaNHEMT器件的影响

利用低压MOCVD技术在蓝宝石衬底上生长了AlGaN/GaN异质结和AlGaN/AlN/GaN异质结二维电子气材料,采用相同器件工艺制造出了AlGaN/GaN HEMT器件和AlGaN/AlN/GaN HEMT器件.通过对两种不同器件的比较和讨论,研究了AlN阻挡层的增加对AlGaN/GaN HEMT器件性能的影响.     

The Effect of an Fe-doped GaN Buffer on off-State Breakdown Characteristics in AlGaN/GaN HEMTs on Si Substrate

An Fe-doped GaN buffer layer was employed in the growth of AlGaN/GaN high-electron mobility transistors (HEMTs) on Si substrates. In order to investigate the effects of an Fe-doped GaN buffer on OFF-state breakdown characteristics, HEMT devices with an Fe-doped GaN buffer on Si substrates were fabricated along with conventional devices utilizing an unintentionally doped GaN buffer on Si substrates. The device characteristics were compared. While HEMT devices with the conventional structure showed an extremely unstable OFF-state breakdown behavior due to punchthrough to the Si substrate, it was demonstrated that an Fe-doped GaN buffer layer on a Si substrate successfully suppressed the premature failure caused by Si-induced breakdown. As a result, the AlGaN/GaN HEMTs with an Fe-doped GaN buffer on Si substrates exhibited much more consistent and enhanced breakdown voltages, when compared with the conventional devices. Consequently, it is highly desirable that AlGaN/GaN HEMTs on Si substrates have an Fe-doped GaN buffer layer in order to achieve stable and robust OFF-state breakdown characteristics     

Characterization of stress degradation effects and thermal properties of AlGaN/GaN HEMTs with photon emission spectral signatures

The influence of stress degradation and device temperature variation on the device properties has been investigated with electrical and photon emission (PE) measurements. To degrade the devices the type of short-time stress tests, namely DC-Step-Stress-Tests of GaN HEMTs have been performed on wafers with and without GaN cap to additionally check the behaviour of various technological processes. It has been found that wafers with GaN cap show much higher critical voltages as compared to non-capped epitaxial designs and have different PE spectral signatures. Thermo-electrical topics like high power dissipation and self-heating of GaN based HEMTs were also investigated with electrical characterization and electroluminescence in various operating conditions.     

AlGaN/GaN HEMT势垒层厚度影响的模拟及优化

完成了对AlGaN/GaN高电子迁移率晶体管(HEMT)的结构设计及器件物理特性的验证等工作.使用TCAD软件完成了该器件直流特性及微波特性等性能的模拟.建立该器件的极化效应模型是本项研究的重点.完成了对异质结条件下诸多模型参数的筛选及修正,得到了符合理论的模拟结果.器件特性的验证与优化基于势垒层厚度h的变化展开,研究...     

蓝宝石衬底上Ka波段AlN/GaN高电子迁移率晶体管

We report the DC and RF characteristics of AlN/GaN high electron mobility transistors(HEMTs) with the gate length of 100 nm on sapphire substrates. The device exhibits a maximum drain current density of 1.29 A/mm and a peak transconductance of 440 m S/mm. A current gain cutoff frequency and a maximum oscillation frequency of 119 GHz and 155 GHz have been obtained, respectively. Furthermore, the large signal load pull characteristics of the AlN/GaN HEMTs were measured at 29 GHz. An output power density of 429 m W/mm has been demonstrated at a drain bias of 10 V. To the authors’ best knowledge, this is the earliest demonstration of power density at the Ka band for Al N/Ga N HEMTs in the domestic, and also a high frequency of load-pull measurements for Al N/Ga N HEMTs.     

多栅指AlGaN/GaN HEMT器件自热效应研究

Self-heating in multi-finger AlGaN/GaN high-electron-mobility transistors(HEMTs) is investigated by measurements and modeling of device junction temperature under steady-state operation.Measurements are carried out using micro-Raman scattering to obtain the detailed and accurate temperature distribution of the device.The device peak temperature corresponds to the high field region at the drain side of gate edge.The channel temperature of the device is modeled using a combined electro-thermal model considering 2DEG transport characteristics and the Joule heating power distribution.The results reveal excellent correlation to the micro-Raman measurements, validating our model for the design of better cooled structures.Furthermore,the influence of layout design on the channel temperature of multi-finger AlGaN/GaN HEMTs is studied using the proposed electro-thermal model, allowing for device optimization.     

Thermal stability investigations of AlGaN/GaN HEMTs with various high work function gate metal designs

The operation of high power RF transistor generates a huge amount of heat and thermal effect is a major consideration for improving the efficiency of power transistors. AlGaN/GaN high electron mobility transistors (HEMTs) on silicon substrates have been studied extensively because of their high thermal conductivity. This study comprehensively investigates the DC, low frequency noise, microwave and RF power performance of Al_0.27Ga_0.73N/GaN HEMTs on silicon substrates at temperatures from room temperature to 100 °C using high work function metals such as palladium (Pd) and iridium (Ir) gate metals. Although the conventional Ni gate exhibited a good metal work function with AlGaN, which is beneficial for increasing the Schottky barrier height of HEMTs, the diffusion of Ni metal toward the AlGaN and GaN layers influences the DC and RF stability of the device at high temperatures or over long-term operation. Pd and Ir exhibited less diffusion at high temperature than Ni, resulting in less degradation of device characteristics after high temperature operation.     

Experimental study of the instabilities observed in 650 V enhancement mode GaN HEMT during short circuit

The paper presents the results of an experimental analysis of the short circuit behaviour of 650 V GaN power HEMT. It is shown that the DUTs exhibit two kinds of failure. A first failure mode involves large dissipated energies and can be attributed directly to the increase of the local temperature in the device. The second failure mode is less attributable to local thermal increase and it is proposed that it is associated with instabilities due to charge-field phenomena taking place in the device at high voltage. The paper shows that 650 V GaN power HEMTs are affected by high frequency oscillations which appear in the SC waveforms as it happens in the short circuit of the IGBTs.     

增强型AlGaN/GaN HEMT器件工艺的研究进展

随着高压开关和高速射频电路的发展,增强型GaN基高电子迁移率晶体管(HEMT)成为该领域内的研究热点。增强型GaN基HEMT只有在加正栅压才有工作电流,可以大大拓展该器件在低功耗数字电路中的应用。近年来,国内外对增强型GaN基HEMT阈值电压的研究主要集中以下两个方面:在材料生长方面,通过生长薄势垒、降低Al组分、生长无极化电荷的AlGaN/GaN异质材料、生长InGaN或p-GaN盖帽层,来控制二维电子气浓度;在器件工艺方面,采用高功函数金属、MIS结构、刻蚀凹栅、F基等离子体处理,来控制表面电势,影响二维电子气浓度。从影响器件阈值电压的相关因素出发,探讨了实现和优化增强型GaN基HEMT的各种工艺方法和发展方向。     

用于功率变换的高击穿增强型AlGaN/GaN HEMTs

首次采用CF4等离子体技术实现可用于功率变换的增强性AlGaN/GaN功率器件。实验结果表明,当AlGaN/GaN器件经功率150W和时间150s等离子体轰击后,器件阈值电压从-4V被调制约为0.5V,表现为增强型。当漂移区LGD从5μm增加到15μm,器件的击穿电压从50V迅速增大到400V,电压增幅达350V。采用长度为3μm源场板结构将器件击穿电压明显地提高,击穿电压增加约为475V,且有着比硅基器件更低的比导通电阻,约为2.9mΩ.cm2。器件模拟结果表明,因源场板在远离栅边缘的漂移区中引入另一个电场强度为1.5MV/cm的电场,从而有效地释放了存在栅边缘的电场,将高达3MV/cm的电场减小至1MV/cm。微波测试结果表明,器件的特征频率fT和最大震荡频率fMAX随Vgs改变,正常工作时两参数均在千兆量级。栅宽为1mm的增强型功率管有较好的交直流和瞬态特性,正向电流约为90mA。故增强型AlGaN/GaN器件适合高压高频大功率变换的应用。     

AlGaN/GaN HEMT器件工艺的研究进展

首先论述了Al GaN/GaN高电子迁移率晶体管(HEMT)在微波大功率领域的应用优势和潜力;其次,介绍并分析了影响Al GaN/GaN HEMT性能的主要参数,分析表明要提高Al-GaN/GaN HEMT的频率和功率性能,需改善寄生电阻、电容、栅长和击穿电压等参数。然后,着重从材料结构和器件工艺的角度阐述了近年来Al GaN/GaN HEMT的研究进展,详细归纳了目前主要的材料生长和器件制作工艺,可以看出基本的工艺思路是尽量提高材料二维电子气的浓度和材料对二维电子气的限制能力的同时减小器件的寄生电容和电阻,增强栅极对沟道的控制能力。另外,根据具体情况调节栅长及沟道电场。最后,简要探讨了Al GaN/GaN HEMT还存在的问题以及面临的挑战。     

14W X波段AlGaN/GaN HEMT功率MMIC

报道了研制的SiC衬底AIGaN/GaN HEMT微带结构微波功率MMIC,芯片工艺采用凹槽栅场板结构提高AlGaN/GaNHEMTs的微波功率特性.S参数测试结果表明AlGaN/GaN HEMTs的频率特性随器件的工作电压变化显著.研制的该2级功率MMIC在9～11GHz带内30V工作,输出功率大于10W,功率增益大于12dB,带内峰值输出功率达到14.7W,功率增益为13.7dB,功率附加效率为23%,该芯片尺寸仅为2.0mm×1.1mm.与已发表的X波段AlGaN/GaN HEMT功率MMIC研制结果相比,本项工作在单位毫米栅宽输出功率和芯片单位面积输出功率方面具有优势.     

A 4.69-W/mm output power density InAIN/GaN HEMT grown on sapphire substrate

We report high performance InAlN/GaN HEMTs grown on sapphire substrates.The lattice-matched InAlN/GaN HEMT sample showed a high 2DEG mobility of 1210 cm2/(V.s)under a sheet density of 2.6 ×1013 cm-2.Large signal load-pull measurements for a(2 × 100 μm)× 0.25 μm device have been conducted with a drain voltage of 24 V at 10 GHz.The presented results confirm the high performances reachable by InAlN-based technology with an output power density of 4.69 W/mm,a linear gain of 11.8 dB and a peak power-added efficiency of 48％.This is the first report of high performance InA1N/GaN HEMTs in mainland China.     

Low-/spl kappa/ BCB passivation on AlGaN-GaN HEMT fabrication

Due to the stress-induced polarization effect on the GaN HEMTs, the surface passivation of the device is critical and is deserved to conduct a detailed study. It has been proven that the GaN HEMTs demonstrate nondispersive pulsed current-voltage (I-V) characteristics and better microwave power performances after passivating the Si/sub 3/N/sub 4/ film on the GaN surface. In this letter, we proposed to use the BCB material, a negative photoresist with a low-/spl kappa/ characteristic, as the surface passivation layer on GaN HEMTs fabrication. After comparing the dc I-V, pulsed I-V, RF small-signal, microwave power characteristics, and device reliability, this BCB-passivated GaN HEMT achieved better performance than the Si/sub 3/N/sub 4/ passivated device.     

MOCVD-Grown AlGaN Buffer GaN HEMTs With V-Gates for Microwave Power Applications

We report the performance of AlGaN buffer GaN high-electron mobility transistors (HEMTs) grown by metal–organic chemical vapor deposition. GaN HEMTs on high-quality AlGaN buffer were grown on SiC substrates. The incorporation of an AlGaN buffer into the GaN HEMT significantly improves channel confinement and suppresses the short-channel effect. Advanced deep-recess V-gate structures were employed to optimize the device for better microwave power performance. With a 10-nm GaN channel layer sandwiched between the AlGaN barrier and buffer, excellent power performance was achieved. The output power density is 13.1 W/mm, and the associated power-added efficiency is 72% at 4-GHz frequency and 48-V drain bias. This power performance is comparable to the state-of-the-art GaN HEMTs grown on GaN buffers, indicating that the AlGaN buffer in our optimized device structure does not introduce any noticeable trapping.      

Influence of the Source–Gate Distance on the AlGaN/GaN HEMT Performance

In this paper, we present Monte Carlo simulation results on the source-gate (S-G) scaling effects in GaN-based HEMTs. The results show that a downscaling of the S-G distance can improve device performance, enhancing the output current and the device transconductance. The main reason for this effect is related to the peculiar dynamic of electrons in the GaN-based HEMTs, which leads to a nonsaturated velocity regime in the source access region, even for high drain applied voltages. On the contrary, the gate-drain distance does not affect the output current within the analyzed device geometries. Based on these results, new optimization strategies for GaN HEMTs could be defined     

AlGaN/GaN高电子迁移率晶体管大信号I-V特性模型

对非线性电流源Ids(Vgs,Vds)的准确描述是Al GaN/GaN HEMT大信号模型的最重要部分之一.Materka模型考虑了夹断电压与Vds的关系,其模型参数只有三个,但是Ids与Vgs的平方关系不符合实际,计算结果与测量数据有误差.我们在考虑了栅电压与漏电流的关系及不同栅压区漏电流随漏电压斜率改变的基础上,提出了改进的高电子迁移率晶体管(HEMT)的直流特性模型.采用这个模型,计算了Al GaN/GaN HEMT器件的大信号I-V特性,并与实际测量数据进行了比较.实验结果表明改进的模型更精确,Ids与Vgs的呈2.5次方的指数关系.