Antioxidant and emulsifying properties of potato protein hydrolysate in soybean oil-in-water emulsions

The efficacy of a previously developed antioxidative potato protein hydrolysate (PPH) for the stabilisation of oil droplets and inhibition of lipid oxidation in soybean oil-in-water (O/W) emulsions was investigated. Emulsions (10% lipid, pH 7.0) with PPH-coated oil droplets were less stable than those produced with Tween 20 (P < 0.05). However, the presence of PPH, whether added before or after homogenisation with Tween 20, retarded emulsion oxidation, showing reduced formation of peroxides up to 53.4% and malonaldehyde-equivalent substances up to 70.8% after 7-d storage at 37 °C (P < 0.05), when compared with PPH-free emulsions. In the emulsions stabilised by PPH + Tween 20, 8–15% of PPH was distributed at the interface. Adjustment of the pH from 3 to 7 markedly increased ζ-potential of such emulsions (P < 0.05). Inhibition of lipid oxidation by PPH in soybean O/W emulsions can be attributed to both chemical and physical (shielding) actions.     

Albumin causes a synergistic increase in the antioxidant activity of green tea catechins in oil-in-water emulsions

Model oil-in-water emulsions containing epicatechin (EC) and epigallocatechin gallate (EGCG) showed a synergistic increase in stability in emulsions containing added albumin. EGCG showed a stronger synergy (35%) with ovalbumin than did EC. Oxidation of the oil was monitored by determining peroxide values and hexanal contents. The effect of bovine serum albumin (BSA) on model oil-in-water emulsions containing each of the green tea catechins [epicatechin gallate (ECG), EGCG, EC and epigallocatechin (EGC)] was studied during storage at 30 °C. The green tea catechins showed moderate antioxidant activity in the emulsions with the order of activity being ECG ≈ EGCG > EC > EGC. Although BSA had very little antioxidant activity in the absence of phenolic antioxidants, the combination of BSA with each of the catechins showed strong antioxidant activity. BSA, in combination with EC, EGCG or EGC, showing the strongest antioxidant activity with good stability after 45 days storage. Model experiments with the catechins stored with BSA in aqueous solutions confirmed that protein–catechin adducts with antioxidant activity were formed between the catechins and protein. The antioxidant activity of the separated protein–catechin adducts increased strongly with storage time and was stronger for EGCG and ECG than for EC or EGC.     

Whey protein concentrate and gum tragacanth as fat replacers in nonfat yogurt: chemical, physical, and microstructural properties

The effect of whey protein concentrate (WPC) and gum tragacanth (GT) as fat replacers on the chemical, physical, and microstructural properties of nonfat yogurt was investigated. The WPC (7.5, 15, and 20 g/L) and GT (0.25, 0.5, 0.75, and 1 g/L) were incorporated into the skim milk slowly at 40 to 45°C with agitation. The yogurt mixes were pasteurized at 90°C for 10 min, inoculated with 0.1% starter culture, and incubated at 42°C to pH 4.6, then refrigerated overnight at 5°C. A control nonfat yogurt and control full fat yogurt were prepared as described, but without addition of WPC and GT. Increasing amount of WPC led to the increase in total solids, total protein, acidity, and ash content, whereas GT did not affect chemical parameters. Increasing WPC caused a more compact structure consisting of robust casein particles and large aggregates. Firmness was increased and susceptibility to syneresis was decreased as WPC increased. No significant difference was observed for firmness and syneresis of yogurt fortified with GT up to 0.5 g/L compared with control nonfat yogurt. Increasing the amount of gum above 0.5 g/L produced softer gels with a greater tendency for syneresis than the ones prepared without it. Addition of GT led to the coarser and more open structure compared with control yogurt.     

Rheology and microstructure of myofibrillar protein-plant lipid composite gels: Effect of emulsion droplet size and membrane type

Composite gels were prepared from 2% myofibrillar protein (MP) with 10% imbedded pre-emulsified plant oils (olive and peanut) of various particle sizes at 0.6 M NaCl, pH 6.2. Dynamic rheological testing upon temperature sweeping (20-70 °C at 2 °C/min) showed substantial increases in G′ (elastic modulus) of MP sols/gels with the addition of emulsions, and the G′ increases were inversely related to the emulsion droplet size. Furthermore, gels containing emulsified olive oil had a greater (P < 0.05) hardness than those containing emulsified peanut oil. Regardless of oil types, MP-coated oil droplets exhibited stronger reinforcement of MP gels than Tween 80-stablized oil droplets; the latter composite gels had considerable syneresis. Light microscopy with paraffin sectioning revealed a stable gel structure when filled with protein-coated oil droplets, compared to gels with Tween 80-treated emulsions that showed coalesced oil droplets. These results suggest that rheological characteristics, hardness, texture, and water-holding capacity of MP gels were influenced by type of oils, the nature of the interfacial membrane, and the size of emulsion droplets.     

Effect of thermal treatments on the properties of coconut milk emulsions prepared with surface-active stabilizers

Previously we have demonstrated improved stability of coconut milk emulsions homogenized with various surface-active stabilizers, i.e., 1 wt% sodium caseinate, whey protein isolate (WPI), sodium dodecyl sulfate (SDS), or polyoxyethylene sorbitan monolaurate (Tween 20) [Tangsuphoom, N., & Coupland, J. N. (2008). Effect of surface-active stabilizers on the microstructure and stability of coconut milk emulsions. Food Hydrocolloids, 22(7), 1233–1242]. This study examines the changes in bulk and microstructural properties of those emulsions following thermal treatments normally used to preserve coconut milk products (i.e., −20 °C, −10 °C, 5 °C, 70 °C, 90 °C, and 120 °C). Calorimetric methods were used to determine the destabilization of emulsions and the denaturation of coconut and surface-active proteins. Homogenized coconut milk prepared without additives was destabilized by freeze–thaw, (−20 °C and −10 °C) but not by chilling (5 °C). Samples homogenized with proteins were not affected by low temperature treatments while those prepared with surfactants were stable to chilling but partially or fully coalesced following freeze–thaw. Homogenized coconut milk prepared without additives coalesced and flocculated after being heated at 90 °C or 120 °C for 1 h in due to the denaturation and subsequent aggregation of coconut proteins. Samples emulsified with caseinate were not affected by heat treatments while those prepared with WPI showed extensive coalescence and phase separation after being treated at 90 °C or 120 °C. Samples prepared with SDS were stable to heating but those prepared with Tween 20 completely destabilized by heating at 120 °C.     

The effect of temperature on adhesion forces between surfaces and model foods containing whey protein and sugar

The formation of fouling deposit from foods and food components is a severe problem in food processing and leads to frequent cleaning. The design of surfaces that resist fouling may decrease the need for cleaning and thus increase efficiency. Atomic force microscopy has been used to measure adhesion forces between stainless steel (SS) and fluoro-coated glass (FCG) microparticles and the model food deposits (i) whey protein (WPC), (ii) sweetened condensed milk, and (iii) caramel. Measurements were performed over a range of processing temperatures between 30 and 90 °C and at contact times up to 60 s. There is a significant increase in adhesion force of both types of microparticle to WPC at 90 °C for all contact times. For confectionary deposits adhesion to SS was similar. Adhesion of confectionary deposits to FCG at 30 °C revealed a decrease in adhesion compared to SS; at higher temperatures the adhesion forces were similar.     

Effects of refrigeration,freezing and replacement of milk fat by inulin and whey protein concentrate on texture profile and sensory acceptance of synbiotic guava mousses

The effects of refrigeration, freezing and substitution of milk fat by inulin and whey protein concentrate (WPC) on the texture and sensory features of synbiotic guava mousses supplemented with the probiotic, Lactobacillus acidophilus La-5, and the prebiotic fibre oligofructose, were studied. The frozen storage (−18 ± 1 °C), followed by thawing at 4 °C before the analyses, and the complete replacement of the milk fat by inulin plus WPC, led to significant differences in the instrumental texture parameters of mousses (P < 0.05). Nonetheless, these changes did not affect the sensory acceptability of the products studied. The frozen storage may be employed to extend the shelf-life of synbiotic guava mousses. Additionally, to obtain a texture profile similar to the traditional product, the simultaneous addition of inulin and WPC is recommended only for the partial replacement of milk fat in refrigerated and frozen mousses, and the total proportion of both ingredients together should not exceed 2.6%.     

Effects of caffeic acid and bovine serum albumin in reducing the rate of development of rancidity in oil-in-water and water-in-oil emulsions

The antioxidant properties of caffeic acid and bovine serum albumin in oil-in-water and water-in-oil emulsions were studied. Caffeic acid (5 mmol/kg emulsion) showed good antioxidant properties in both 30% sunflower oil-in-water (OW) and 20% water-in-sunflower oil emulsions (WO), pH 5.4, during storage at 50 °C. Although bovine serum albumin (BSA) (0.2%) had a slight antioxidant effect, the combination of caffeic acid and BSA showed a synergistic reduction in the rate of development of rancidity, with significant reductions in concentration of total volatiles, peroxide value (PV) and p-anisidine value (PA) for both emulsion types. The synergistic increase in stability of the OW and WO emulsions containing BSA and caffeic acid was 102.9% and 50.4% respectively based on total oxidation (TOTOX) values, which are calculated as 2PV + PA, with greater synergy calculated if based on formation of headspace volatiles. The OW emulsion was more susceptible to the development of headspace volatiles by oxidation than the WO emulsion, even though the degree of oxidation assessed by the TOTOX value was similar.     

Sodium caseinate–maltodextrin conjugate hydrolysates: Preparation,characterisation and some functional properties

Hydrolysates of sodium caseinate (NaCN)–maltodextrin (Md40 or Md100) conjugates were prepared with a limited (<10%) and moderate (>10%) degree of hydrolysis. When assessed in the pH range 2.0–8.0, each conjugate hydrolysate had improved solubility compared to NaCN and their respective native unhydrolysed conjugate. Oil-in-water emulsions containing NaCN (1%, w/w, protein) and various combinations of conjugate hydrolysates (0.2%, w/w) and/or glycerol monostearate (0.07–0.3%, w/w, GMS) were prepared; emulsion storage stability (at 45 °C for up to 20 days) and heat stability (at 140 °C for up to 20 min) was determined by measuring changes in the mean size of fat globules in emulsions. NaCN plus conjugate hydrolysate-stabilised emulsions had improved storage stability compared to a NaCN stabilised emulsion. In general, NaCN plus conjugate hydrolysate-stabilised emulsions were less heat-stable than NaCN or NaCN plus GMS stabilised emulsions; however, emulsions stabilised by NaCN plus one of the conjugate hydrolysates (CH102) had improved heat stability in comparison to the NaCN stabilised emulsion. The results show that hydrolysates of NaCN–Md conjugates have potential for use as emulsification aids in emulsion-based food products.     

Oxidative stability of oil-in-water emulsions stabilised with protein or surfactant emulsifiers in various oxidation conditions

Many studies have investigated the effect of emulsifiers on the oxidative stability of oil-in-water (O/W) emulsions. A better oxidative stability of surfactant-stabilised O/W emulsions as compared to protein-stabilised emulsions has been recently shown in conditions when the major part of the emulsifier is adsorbed at the oil-water interface and oxidation is induced by iron−ethylenediaminetetraacetic acid (EDTA) complex. In this work, the contribution of the interfacial layer to the oxidation of emulsified lipids is investigated under various incubation conditions, involving different oxidation mechanisms. O/W emulsions were formulated at pH 6.7 with limited amounts of emulsifiers in the aqueous phase. Emulsions were incubated either at 33 °C without initiator at 25 °C in the presence of iron/ascorbate, metmyoglobin or 2,2′-azobis(2-amidinopropane)-dihydrochloride (AAPH). Oxygen uptake and volatile compound formation confirmed that protein-stabilised emulsions are less oxidatively stable than Tween 20-stabilised ones. This work also shows complex oxidative interrelationships between oxidation initiator and certain proteins, such as β-casein and bovine serum albumin.     

High hydrostatic pressure modification of whey protein concentrate for improved functional properties

Whey protein concentrate (WPC) has many applications in the food industry. Previous research demonstrated that treatment of whey proteins with high hydrostatic pressure (HHP) can enhance solubility and foaming properties of whey proteins. The objective of this study was to use HHP to improve functional properties of fresh WPC, compared with functional properties of reconstituted commercial whey protein concentrate 35 (WPC 35) powder. Fluid whey was ultrafiltered to concentrate proteins and reconstituted to equivalent total solids (8.23%) as reconstituted commercial WPC 35 powder. Solutions of WPC were treated with 300 and 400 MPa (0- and 15-min holding time) and 600 MPa (0-min holding time) pressure. After HHP, the solubility of the WPC was determined at both pH 4.6 and 7.0 using UDY and BioRad protein assay methods. Overrun and foam stability were determined after protein dispersions were whipped for 15 min. The protein solubility was greater at pH 7.0 than at pH 4.6, but there were no significant differences at different HHP treatment conditions. The maintenance of protein solubility after HHP indicates that HHP-treated WPC might be appropriate for applications to food systems. Untreated WPC exhibited the smallest overrun percentage, whereas the largest percentage for overrun and foam stability was obtained for WPC treated at 300 MPa for 15 min. Additionally, HHP-WPC treated at 300 MPa for 15 min acquired larger overrun than commercial WPC 35. The HHP treatment of 300 MPa for 0 min did not improve foam stability of WPC. However, WPC treated at 300 or 400 MPa for 15 min and 600 MPa for 0 min exhibited significantly greater foam stability than commercial WPC 35. The HHP treatment was beneficial to enhance overrun and foam stability of WPC, showing promise for ice cream and whipping cream applications.     

Inhibition of lipid oxidation by encapsulation of emulsion droplets within hydrogel microspheres

The purpose of this study was to assess whether the oxidation of polyunsaturated lipids could be inhibited by encapsulating them within protein-rich hydrogel microspheres (size range 1-100 μm). Filled hydrogel microspheres were fabricated as follows: (i) high methoxy pectin, sodium caseinate, and casein-coated lipid droplets were mixed at pH 7, (ii) the mixture was acidified (pH 5), (iii) casein was cross-linked using transglutaminase, (iv) the pH was adjusted to pH 7. Samples were stored in the dark at 55 °C and were monitored for lipid hydroperoxide formation and headspace propanal. Oxidation of fish oil (1% vol/vol) in the microspheres was compared with that in oil-in-water emulsions stabilised by either sodium caseinate or Tween 20. Emulsions stabilised by Tween 20 oxidised faster than either microspheres or emulsions stabilised by casein, while microspheres and the casein stabilised emulsion showed similar oxidation rates. Results highlight the natural antioxidant properties of food proteins.     

A physicochemical investigation of membrane fouling in cold microfiltration of skim milk

The main challenge in microfiltration (MF) is membrane fouling, which leads to a significant decline in permeate flux and a change in membrane selectivity over time. This work aims to elucidate the mechanisms of membrane fouling in cold MF of skim milk by identifying and quantifying the proteins and minerals involved in external and internal membrane fouling. Microfiltration was conducted using a 1.4-μm ceramic membrane, at a temperature of 6 ± 1°C, cross-flow velocity of 6 m/s, and transmembrane pressure of 159 kPa, for 90 min. Internal and external foulants were extracted from a ceramic membrane both after a brief contact between the membrane and skim milk, to evaluate instantaneous adsorption of foulants, and after MF. Four foulant streams were collected: weakly attached external foulants, weakly attached internal foulants, strongly attached external foulants, and strongly attached internal foulants. Liquid chromatography coupled with tandem mass spectrometry analysis showed that all major milk proteins were present in all foulant streams. Proteins did appear to be the major cause of membrane fouling. Proteomics analysis of the foulants indicated elevated levels of serum proteins as compared with milk in the foulant fractions collected from the adsorption study. Caseins were preferentially introduced into the fouling layer during MF, when transmembrane pressure was applied, as confirmed both by proteomics and mineral analyses. The knowledge generated in this study advances the understanding of fouling mechanisms in cold MF of skim milk and can be used to identify solutions for minimizing membrane fouling and increasing the efficiency of milk MF.     

Enhancing anti-inflammation activity of curcumin through O/W nanoemulsions

High-speed and high-pressure homogenized O/W emulsions using medium chain triacylglycerols (MCT) as oil and Tween 20 as emulsifier, with mean droplet sizes ranging from 618.6 nm to 79.5 nm, have been successfully prepared. The enhanced anti-inflammation activity of curcumin encapsulated in O/W emulsions is evidenced by the mouse ear inflammation model. There is a 43% or 85% inhibition effect of 12-O-tetradecanoylphorbol-13-acetate (TPA)-induced edema of mouse ear for 618.6 nm and 79.5 nm 1% curcumin O/W emulsions, respectively, but a negligible effect is found for 1% curcumin in 10% Tween 20 water solution.     

Enzymatic hydrolysis of heated whey: iron-binding ability of peptides and antigenic protein fractions

This study evaluated the influence of various enzymes on the hydrolysis of whey protein concentrate (WPC) to reduce its antigenic fractions and to quantify the peptides having iron-binding ability in its hydrolysates. Heated (for 10 min at 100°C) WPC (2% protein solution) was incubated with 2% each of Alcalase, Flavourzyme, papain, and trypsin for 30, 60, 90, 120, 150, 180, and 240 min at 50°C. The highest hydrolysis of WPC was observed after 240 min of incubation with Alcalase (12.4%), followed by Flavourzyme (12.0%), trypsin (10.4%), and papain (8.53%). The nonprotein nitrogen contents of WPC hydrolysate followed the hydrolytic pattern of whey. The major antigenic fractions (β-lactoglobulin) in WPC were degraded within 60 min of its incubation with Alcalase, Flavourzyme, or papain. Chromatograms of enzymatic hydrolysates of heated WPC also indicated complete degradation of β-lactoglobulin, α-lactalbumin, and BSA. The highest iron solubility was noticed in hydrolysates derived with Alcalase (95%), followed by those produced with trypsin (90%), papain (87%), and Flavourzyme (81%). Eluted fraction 1 (F-1) and fraction 2 (F-2) were the respective peaks for the 0.25 and 0.5 M NaCl chromatographic step gradient for analysis of hydrolysates. Iron-binding ability was noticeably higher in F-1 than in F-2 of all hydrolysates of WPC. The highest iron contents in F-1 were observed in WPC hydrolysates derived with Alcalase (0.2 mg/kg), followed by hydrolysates derived with Flavourzyme (0.14 mg/kg), trypsin (0.14 mg/kg), and papain (0.08 mg/kg). Iron concentrations in the F-2 fraction of all enzymatic hydrolysates of WPC were low and ranged from 0.03 to 0.05 mg/kg. Fraction 1 may describe a new class of iron chelates based on the reaction of FeSO₄·7H₂O with a mixture of peptides obtained by the enzymatic hydrolysis of WPC. The chromatogram of Alcalase F-1 indicated numerous small peaks of shorter wavelengths, which probably indicated a variety of new peptides with greater ability to bind with iron. Alcalase F-1 had higher Ala (18.38%), Lys (17.97%), and Phe (16.58%) concentrations, whereas the presence of Pro, Gly, and Tyr was not detected. Alcalase was more effective than other enzymes at producing a hydrolysate for the separation of iron-binding peptides derived from WPC.     

Flaxseed oil – Whey protein isolate emulsions: Effect of high pressure homogenization

The effect of high-pressure homogenization (20–100 MPa) and the number of homogenization cycles (1–7) on the stability of flaxseed oil - whey protein isolate emulsions was evaluated. All the emulsions were stable to creaming for at least 9 d of storage. An increase in homogenization pressure from 20 to 80 MPa and number of passes through the homogenizer up to 3, decreased the mean droplet size of the O/W emulsions despite the higher polydispersity. Emulsions homogenized at lower pressures (20 MPa) showed a monomodal distribution of the particles, whereas, an increase in pressure to 80 MPa led to a bimodal distribution, indicating droplets coalescence. High-pressure homogenization (80 MPa) and an increase in the number of homogenization cycles, led to the formation of high molecular weight aggregates (>200 kDa), which favored an increase in viscosity of the emulsions. The increase in homogenization pressure also increased the formation of primary oxidation products, which could be explained by the increase in temperature and in the surface area of the droplets.     

Peptic and tryptic hydrolysis of native and heated whey protein to reduce its antigenicity

This study examined the effects of enzymes on the production and antigenicity of native and heated whey protein concentrate (WPC) hydrolysates. Native and heated (10 min at 100°C) WPC (2% protein solution) were incubated at 50°C for 30, 60, 90, and 120 min with 0.1, 0.5, and 1% pepsin and then with 0.1, 0.5, and 1% trypsin on a protein-equivalent basis. A greater degree of hydrolysis was achieved and greater nonprotein nitrogen concentrations were obtained in heated WPC than in native WPC at all incubation times. Hydrolysis of WPC was increased with an increasing level of enzymes and higher incubation times. The highest hydrolysis (25.23%) was observed in heated WPC incubated with 1% pepsin and then with 1% trypsin for 120 min. High molecular weight bands, such as BSA, were completely eliminated from sodium dodecyl sulfate-PAGE of both native and heated WPC hydrolysates produced with pepsin for the 30-min incubation. The α-lactalbumin in native WPC was slightly degraded when incubated with 0.1% pepsin and then with 0.1% trypsin; however, it was almost completely hydrolyzed within 60 min of incubation with 0.5% pepsin and then with 0.5% trypsin. Incubation of native WPC with 1% pepsin and then with 1% trypsin for 30 min completely removed the BSA and α-lactalbumin. The β-lactoglobulin in native WPC was not affected by the pepsin and trypsin treatments. The β-lactoglobulin in heated WPC was partially hydrolyzed by the 0.1 and 0.5% pepsin and trypsin treatments and was completely degraded by the 1% pepsin and trypsin treatment. Antigenicity reversibly mimicked the hydrolysis of WPC and the removal of β-lactoglobulin from hydrolysates. Antigenicity in heated and native WPC was reduced with an increasing level of enzymes. A low antigenic response was observed in heated WPC compared with native WPC. The lowest antigenicity was observed when heated WPC was incubated with 1% pepsin and then with 1% trypsin. These results suggested that incubation of heated WPC with 1% pepsin and then with 1% trypsin was the most effective for producing low-antigenic hydrolysates by WPC hydrolysis and obtaining low molecular weight small peptides. Further research is warranted to identify the low molecular weight small peptides in the WPC hydrolysates produced by pepsin and trypsin, which may enhance the use of whey.     

Viscoelastic behaviour of heat-treated whey protein concentrate suspensions

The viscoelastic behaviour of heat-treated whey protein concentrate (WPC) suspensions was studied. Suspensions with total protein (TP) content of 5% and 9% w/v prepared from a commercial WPC with 38% w/w protein were treated at two temperatures (72.5 and 77.5 °C) during selected times to obtain 60% of denatured protein content. Unheated WPC suspensions were used as control. Frequency sweeps were performed in the range of 0.01–10 Hz at 20 °C. Mechanical spectra of WPC suspensions were similar to viscoelastic fluids. However, unheated WPC suspensions showed some mechanical characteristics of colloidal crystals, like little dependency of elastic (G′) and viscous (G″) moduli with TP content, solid-like mechanical spectra, and difficulty to flow at low content of TP. At a selected frequency of 1 Hz, viscous modulus was more frequency (ω) dependant on experimental conditions (TP and temperature) than elastic modulus. Mechanical spectra were modelled using power law equations (G′ = aω^x, G″ = bω^y), but only parameters of heat-treated WPC suspensions containing 9% of TP showed temperature dependency. Characteristic relaxation times (τ_c) were calculated as the inverse of the crossover frequency, where G″ = G′. Heat treatments produced a decrease in the extent of the elastic behaviour because heat-treated WPC suspensions presented higher phase angle and smaller τ_c values than unheated WPC suspensions for the same TP content. The τ_c decreased when treatment temperature increased but only in heat-treated WPC suspensions with 5% of TP.     

Analysis of the fouling mechanisms during cross-flow ultrafiltration of apple juice

The purpose of this work was to study the fouling mechanisms of a Carbosep^® M8 membrane during the cross-flow ultrafiltration of apple juice. A new fouling model has been developed that simultaneously considers membrane blocking within the pores, at the pore mouths and by cake formation at the membrane surface. Membrane fouling by apple juice was due to internal pore blocking as well as cake formation. When operating ultrafiltration at a transmembrane pressure of 150 kPa and a cross-flow velocity of 7 m/s, fouling was minimal with a gradual decrease of the relative contribution of cake formation; however, transmembrane pressure still exceeds critical pressure. The fouling model predicts no cake formation at a cross-flow velocity of 7.4 m/s and a transmembrane pressure of 150 kPa or at a cross-flow velocity of 7.0 m/s and a transmembrane pressure of 120 kPa. Under these conditions, internal membrane blocking would be the only mechanism responsible for the decrease of permeate flux.     

Short communication: Low-fat ice cream flavor not modified by high hydrostatic pressure treatment of whey protein concentrate

The purpose of this study was to examine flavor binding of high hydrostatic pressure (HHP)-treated whey protein concentrate (WPC) in a real food system. Fresh Washington State University (WSU, Pullman) WPC, produced by ultrafiltration of separated Cheddar cheese whey, was treated at 300 MPa for 15 min. Commercial WPC 35 powder was reconstituted to equivalent total solids as WSU WPC (8.23%). Six batches of low-fat ice cream were produced: A) HHP-treated WSU WPC without diacetyl; B) and E) WSU WPC with 2 mg/L of diacetyl added before HHP; C) WSU WPC with 2 mg/L of diacetyl added after HHP; D) untreated WSU WPC with 2 mg/L of diacetyl; and F) untreated commercial WPC 35 with 2 mg/L of diacetyl. The solution of WSU WPC or commercial WPC 35 contributed 10% to the mix formulation. Ice creams were produced by using standard ice cream ingredients and processes. Low-fat ice creams containing HHP-treated WSU WPC and untreated WSU WPC were analyzed using headspace-solid phase microextraction-gas chromatography. Sensory evaluation by balanced reference duo-trio test was carried out using 50 untrained panelists in 2 sessions on 2 different days. The headspace-solid phase microextraction-gas chromatography analysis revealed that ice cream containing HHP-treated WSU WPC had almost 3 times the concentration of diacetyl compared with ice cream containing untreated WSU WPC at d 1 of storage. However, diacetyl was not detected in ice creams after 14 d of storage. Eighty percent of panelists were able to distinguish between low-fat ice creams containing untreated WSU WPC with and without diacetyl, confirming panelists’ ability to detect diacetyl. However, panelists were not able to distinguish between low-fat ice creams containing untreated and HHP-treated WSU WPC with diacetyl. These results show that WPC diacetyl-binding properties were not enhanced by 300-MPa HHP treatment for 15 min, indicating that HHP may not be suitable for such applications.