薄膜SOI MOS器件阈值电压的解析模型分析

研究了薄膜全耗尽增强型 SOIMOS器件阈值电压的解析模型 ,并采用计算机模拟 ,得出了硅膜掺杂浓度和厚度、正栅和背栅二氧化硅层厚度及温度对阈值电压影响的三维分布曲线 ,所得到的模拟结果和理论研究结果相吻合。     

On the performance of single-gated ultrathin-body SOI Schottky-barrier MOSFETs

The authors study the dependence of the performance of silicon-on-insulator (SOI) Schottky-barrier (SB) MOSFETs on the SOI body thickness and show a performance improvement for decreasing SOI thickness. The inverse subthreshold slopes S extracted from the experiments are compared with simulations and an analytical approximation. Excellent agreement between experiment, simulation, and analytical approximation is found, which shows that S scales approximately as the square root of the gate oxide and the SOI thickness. In addition, the authors study the impact of the SOI thickness on the variation of the threshold voltage V/sub th/ of SOI SB-MOSFETs and find a nonmonotonic behavior of V/sub th/. The results show that to avoid large threshold voltage variations and achieve high-performance devices, the gate oxide thickness should be as small as possible, and the SOI thickness should be /spl sim/ 3 nm.     

Minimizing floating-body-induced threshold voltage variation inpartially depleted SOI CMOS

Pulse propagation problems associated with dynamic floating-body effects, e.g., pulse stretching, is measured in partially depleted SOI CMOS inverter chains. Pulse stretching is found to be dependent on pulse frequency and V_DD. Such behavior is attributed to floating-body-induced transient threshold voltage variation in partially depleted SOI CMOS devices due to floating-body charge imbalance between logic states during CMOS switching. Such an imbalance can be minimized through proper device design because of the different dependencies of the gate and drain depletion charges on channel length, silicon film thickness, gate oxide thickness, channel doping, and supply voltage. This is confirmed by measuring the maximum transient threshold voltage variation in discrete partially depleted SOI NMOS devices in configurations which are predictive of CMOS switching behavior     

An analytical back gate bias dependent threshold voltage model forSiGe-channel ultrathin SOI PMOS devices

An analytical threshold voltage model for SiGe-channel ultrathin SOI PMOS devices is presented. As confirmed by the PISCES simulation results, the analytical model provides a good prediction on the threshold voltage. According to the analytical-formula, depending on the back gate bias, the SiGe-channel SOI PMOS device may have a conduction channel at the top or the bottom of the SiGe channel or at the top of the field oxide     

Short-channel single-gate SOI MOSFET model

The authors derive an analytical model for threshold voltage for fully depleted single-gate silicon-on-insulator (SOI) MOSFETs taking into consideration the two-dimensional effects in both SOI and buried-oxide layers. Their model is valid for both long- and short-channel SOI MOSFETs and demonstrates the dependence of short-channel effects on the device parameters of channel-doping concentration, gate oxide, SOI, and buried-oxide thickness. It reproduces the numerical data for sub-0.1-/spl mu/m gate-length devices better than previous models.     

全耗尽SOI LDMOS阈值电压的解析模型

通过准二维的方法,求出了全耗尽SOILDMOS晶体管沟道耗尽区电势分布的表达式,并建立了相应的阈值电压模型。将计算结果与二维半导体器件模拟软件MEDICI的模拟结果相比较,两者误差较小,证明了本模型的正确性。从模型中可以容易地分析阈值电压与沟道浓度、长度、SOI硅膜层厚度以及栅氧化层厚度的关系,并且发现ΔVth与背栅压的大小无关。     

Advanced technologies for optimized sub-quarter-micrometer SOI CMOSdevices

Two manufacturable technologies of fully-depleted (FD) thin-film silicon-on-insulator (SOI) MOSFET's for low-power applications are proposed in this paper. To maintain high current drive while aggressively thinning down the SOI film, silicide is to be formed on Ge-damaged silicon layers. Ge preamorphization facilitates silicide formation at low temperature (~450°C) and effectively controls the silicide depth without void formation. It also reduces the floating body effect. In addition, a reliable gate work-function engineering is introduced for good threshold voltage management. A p⁺SiGe/Si stack gate alleviates the threshold voltage instability of SOI due to film thickness nonuniformity and broadens the design window for channel doping. These advanced technologies, compatible with existing bulk CMOS technology, are integrated into SOI CMOS process. Excellent electrical device results are presented     

The behavior of narrow-width SOI MOSFETs with MESA isolation

Narrow-width effects in thin-film silicon on insulator (SOI) MOSFETs with MESA isolation technology have been studied theoretically and experimentally. As the channel width of the MOSFET is scaled down, the gate control of the channel potential is enhanced. It leads to the suppression of drain current dependence on substrate bias and punchthrough effect in narrow-width devices. The variation of threshold voltage with the channel width is also studied and is found to have a strong dependence on thickness of silicon film, interface charges in the buried oxide and channel type of SOI MOSFETs     

SOI LDMOS栅漏电容特性的研究

借助软件,模拟并研究了SOI LDMOS栅漏电容Cgd与栅源电压Vgs和漏源电压Vds的关系;研究了栅氧化层厚度,漂移区注入剂量,P阱注入剂量,SOI厚度,场板长度等五个结构工艺参数对Cgd的影响;提出了减小SOI LDMOS栅漏电容Cgd的各参数调节方法.     

Fully depleted dual-gated thin-film SOI P-MOSFETs fabricated in SOI islands with an isolated buried polysilicon backgate

P-channel dual-gated thin-film silicon-on-insulator (DG-TFSOI) MOSFETs have been fabricated with an isolated buried polysilicon backgate in an SOI island formed by epitaxial lateral overgrowth (ELO) of silicon. This structure allows individual operation of both the top and back gates rather than the conventional common backgate structure. When fully-depleted, the buried gate is used to individually shift the top gate threshold voltage (V/sub T/). A linear shift of /spl Delta/V/sub T,top///spl Delta/V/sub G,back/ of 0.5 V/V was achieved with a thin buried oxide. The effective density of interface traps (D/sub it/) for the backgate polysilicon-oxide SOI interface was measured to be 1.8/spl times/10/sup 11/ #/cm/sup 2//spl middot/eV as compared to the substrate-oxide of 1.1/spl times/10/sup 11/ #/cm/sup 2//spl middot/eV.     

硅膜厚度对0.1μm SOI槽栅NMOS器件特性的影响

SOI技术和槽栅MOS新器件结构是在改善器件特性方面的两大突破,SOI槽栅MOS器件结构能够弥补体硅槽栅MOS器件在驱动能力和亚阈值特性方面的不足,同时也保证了在深亚微米领域的抑制短沟道效应和抗热载流子效应的能力.仿真结果显示硅膜厚度对SOI槽栅MOS器件的阈值电压、亚阈值特性和饱和驱动能力都有较大影响,选择最佳的硅膜厚度是获得较好的器件特性的重要因素.     

Threshold Voltage Variation in SOI Schottky-Barrier MOSFETs

The inhomogeneity of Schottky-barrier (SB) height Phi_B is found to strongly affect the threshold voltage V_th of SB-MOSFETs fabricated in ultrathin body silicon-on-insulator (SOI). The magnitude of this influence is dependent on gate oxide thickness t_OX and SOI body thickness; the contribution of inhomogeneity to the V_th variation becomes less pronounced with smaller t_OX and/or larger t_si . Moreover, an enhanced V_th variation is observed for devices with dopant segregation used for reduction of the effective Phi_B . Furthermore, a multigate structure is found to help suppress the V_th variation by improving carrier injection through reduction of its sensitivity to the Phi_B inhomogeneity. A new method for extraction of Phi_B from room temperature transfer characteristics is also presented.     

全耗尽SOI MOSFETs阈值电压解析模型

提出了一种新的全耗尽SOI MOSFETs阈值电压二维解析模型.通过求解二维泊松方程得到器件有源层的二维电势分布函数,氧化层-硅界面处的电势最小值用于监测SOI MOSFETs的阈值电压.通过对不同栅长、栅氧厚度、硅膜厚度和沟道掺杂浓度的SOI MOSFETs的MEDICI模拟结果的比较,验证了该模型,并取得了很好的一致性.     

用于200V电平位移电路的薄层SOI高压LDMOS

文章基于1.5μm厚顶层硅SOI材料,设计了用于200 V电平位移电路的高压LDMOS,包括薄栅氧nLDMOS和厚栅氧pLDMOS。薄栅氧nLDMOS和厚栅氧pLDMOS都采用多阶场板以提高器件耐压,厚栅氧pLDMOS采用场注技术形成源端补充注入,避免了器件发生背栅穿通。文中分析了漂移区长度、注入剂量和场板对器件耐压的影响。实验表明,薄栅氧nLDMOS和厚栅氧pLDMOS耐压分别达到344 V和340 V。采用文中设计的高压器件,成功研制出200 V高压电平位移电路。     

Comparison of self-heating effect in GAA and SOI mosfets

An analytical model is developed to estimate the effect of the scaling of the buried oxide on the heat flow in SOI devices. The heat evacuation is shown to follow the buried oxide thickness to the n-th power with −0.5 > n > −1, and it strongly depends on device dimensions. Three experimental independent evidences of reduced self-heating in GAA devices are provided and analyzed in the light of an analytical model. The advantage of the GAA structure is to replace the buried oxide below the channel by a back polysilicon gate that benefits for a much larger thermal conductivity. To achieve the same result in SOI devices, the buried oxide thickness should be reduced down to twice the gate oxide thickness, which unfortunately would also lead to a dramatic increase of source and drain parasitic capacitances. In the GAA transistor, on the contrary, source and drain regions still lie on the thick buried oxide layer such that those parasitic elements keep a low value.     

Two-dimensional self-consistent simulation of a triangular p-channel SOI nano-flash memory device

This paper presents the simulation of an SOI nano-flash memory device. The device is composed of a triangular quantum wire channel p-MOSFET with a self-aligned nano-floating gate embedded in the gate oxide. The simulation is carried out by combining TSUPREM-4 and a two-dimensional (2-D) self-consistent solution of the Poisson and Schrodinger equations. The fabrication process as well as quantum physics are taken into account. Hole distribution in the inversion layer of the triangular channel section is calculated in terms of wave functions and energy subbands. The threshold voltage shift between the programming and erasing of the device is investigated. In this paper, we show that the channel shape plays a crucial role in the programming voltage and the threshold voltage shift. Based on the fact that the holes are confined mainly at the top of the triangular channel section, we explain why our triangular channel device can be operated at relatively low programming voltage despite of a thick gate oxide and tunnel oxide. The threshold voltage shift in the triangular channel device is compared with that in a rectangular channel device. The result shows that the triangular channel device exhibits the larger threshold voltage shift.     

Highly suppressed short-channel effects in ultrathin SOI n-MOSFETs

We have investigated short-channel effects of ultrathin (4-18-nm thick) silicon-on-insulator (SOI) n-channel MOSFET's in the 40-135 nm gate length regime. It is experimentally and systematically found that the threshold voltage (V_th) roll-off and subthreshold slope (S-slope) are highly suppressed as the channel SOI thickness is reduced. The experimental 40-nm gate length, 4-nm thick ultrathin SOI n-MOSFET shows the S-slope of only 75 mV and the ΔV_th of only 0.07 V as compared to the value in the case of the long gate-length (135 nm) device. Based on these experimental results, the remarkable advantage of an ultrathin SOI channel in suppressing the short-channel effects is confirmed for future MOS devices     

Threshold voltage and subthreshold slope of multiple-gate SOI MOSFETs

The subthreshold swing and threshold voltage characteristics of multiple-gate SOI transistors have been numerically simulated. These devices behave like cylindrical, surrounding gate devices, with the exception of the corner inversion effect. The corner inversion effect is, however, shown to be negligible if the devices are fully depleted devices or if the gate insulator thickness is small enough.     

Undoped-Body Extremely Thin SOI MOSFETs With Back Gates

We present a detailed study of gate length scalability and device performance of undoped-body extremely thin silicon-on-insulator (ETSOI) MOSFETs with back gates. We show that short channel control improves with the application of back bias via a decrease in the electrostatic scaling length as the subthreshold charges move toward the front gate. We demonstrate that, even for undoped ETSOI devices with ~8-nm SOI thickness, the improvement in short channel control with the application of a back bias translates to 10% higher drive current, 10% shorter gate lengths, and, consequently, 20% lower extrinsic gate delay at a fixed off-state current of 100 nA/mum and a back oxide electric field of 1.5 MV/cm (0.5 MV/cm SOI field).     

Analysis of temperature-induced saturation threshold voltage degradation in deep-submicrometer ultrathin SOI MOSFETs

This paper presents a systematic study of the temperature lowering influence on the saturation threshold voltage degradation in ultrathin deep-submicrometer fully depleted silicon-on-insulator (SOI) MOSFETs. It is observed that the difference between the threshold voltage obtained with low and high drain bias, increases at lower temperatures for nMOSFETs, whereas it is weakly temperature-dependent for pMOSFETs. Experimental results and two-dimensional numerical simulations are used to support the analysis. The influence of applied back gate bias on threshold voltage variation is also studied. It is demonstrated that the higher doping level into the body region provided by the halo ion implantation associated to the floating-body increases both the multiplication factor and the parasitic bipolar gain as the temperature is lowered contributing to the threshold voltage degradation. The absence of halo implantation efficiently improves this degradation. The use of double gate structure, even with high body doping level, suppress the saturation threshold voltage degradation in cryogenic operation.