Low‐Temperature‐Processed Printed Metal Oxide Transistors Based on Pure Aqueous Inks

Additive patterning of transparent conducting metal oxides at low temperatures is a critical step in realizing low‐cost transparent electronics for display technology and photovoltaics. In this work, inkjet‐printed metal oxide transistors based on pure aqueous chemistries are presented. These inks readily convert to functional thin films at lower processing temperatures (T ≤ 250 °C) relative to organic solvent‐based oxide inks, facilitating the fabrication of high‐performance transistors with both inkjet‐printed transparent electrodes of aluminum‐doped cadmium oxide (ACO) and semiconductor (InO_x ). The intrinsic fluid properties of these water‐based solutions enable the printing of fine features with coffee‐ring free line profiles and smoother line edges than those formed from organic solvent‐based inks. The influence of low‐temperature annealing on the optical, electrical, and crystallographic properties of the ACO electrodes is investigated, as well as the role of aluminum doping in improving these properties. Finally, the all‐aqueous‐printed thin film transistors (TFTs) with inkjet‐patterned semiconductor (InO_x ) and source/drain (ACO) layers are characterized, which show ideal low contact resistance (R _c < 160 Ω cm) and competitive transistor performance (µ _lin up to 19 cm² V^?1 s^?1, Subthreshold Slope (SS) ≤150 mV dec^?1) with only low‐temperature processing (T ≤ 250 °C).     

Ion‐Conductive,Viscosity‐Tunable Hexagonal Boron Nitride Nanosheet Inks

Liquid‐phase exfoliation of layered solids holds promise for the scalable production of 2D nanosheets. When combined with suitable solvents and stabilizing polymers, the rheology of the resulting nanosheet dispersions can be tuned for a variety of additive manufacturing methods. While significant progress is made in the development of electrically conductive nanosheet inks, minimal effort is applied to ion‐conductive nanosheet inks despite their central role in energy storage applications. Here, the formulation of viscosity‐tunable hexagonal boron nitride (hBN) inks compatible with a wide range of printing methods that span the spectrum from low‐viscosity inkjet printing to high‐viscosity blade coating is demonstrated. The inks are prepared by liquid‐phase exfoliation with ethyl cellulose as the polymer dispersant and stabilizer. Thermal annealing of the printed structures volatilizes the polymer, resulting in a porous microstructure and the formation of a nanoscale carbonaceous coating on the hBN nanosheets, which promotes high wettability to battery electrolytes. The final result is a printed hBN nanosheet film that possesses high ionic conductivity, chemical and thermal stability, and electrically insulating character, which are ideal characteristics for printable battery components such as separators. Indeed, lithium‐ion battery cells based on printed hBN separators reveal enhanced electrochemical performance that exceeds commercial polymer separators.     

Inkjet‐Printed Single‐Droplet Organic Transistors Based on Semiconductor Nanowires Embedded in Insulating Polymers

Fabrication of organic field‐effect transistors (OFETs) using a high‐throughput printing process has garnered tremendous interest for realizing low‐cost and large‐area flexible electronic devices. Printing of organic semiconductors for active layer of transistor is one of the most critical steps for achieving this goal. The charge carrier transport behavior in this layer, dictated by the crystalline microstructure and molecular orientations of the organic semiconductor, determines the transistor performance. Here, it is demonstrated that an inkjet‐printed single‐droplet of a semiconducting/insulating polymer blend holds substantial promise as a means for implementing direct‐write fabrication of organic transistors. Control of the solubility of the semiconducting component in a blend solution can yield an inkjet‐printed single‐droplet blend film characterized by a semiconductor nanowire network embedded in an insulating polymer matrix. The inkjet‐printed blend films having this unique structure provide effective pathways for charge carrier transport through semiconductor nanowires, as well as significantly improve the on‐off current ratio and the environmental stability of the printed transistors.     

Rheological and Drying Considerations for Uniformly Gravure‐Printed Layers: Towards Large‐Area Flexible Organic Light‐Emitting Diodes

Printing organic semiconductor inks by means of roll‐to‐roll compatible techniques will allow a continuous, high‐volume fabrication of large‐area flexible optoelectronic devices. The gravure printing technique is set to become a widespread process for the high throughput fabrication of functional layers. The gravure printing process of a poly‐phenylvinylene derivative light‐emitting polymer dissolved in a two solvent mixture on poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is studied. The surface tensions, contact angles, viscosities, and drying times of the formulations are investigated as a function of the solvent volume fraction and polymer concentration. The properties of the ink grant a homogeneous printed layer, suitable for device fabrication, when the calculated film leveling time is shorter than a critical time, at which the film has been frozen due to loss of solvent via evaporation. The knowledge obtained from the printing process is applied to fabricate organic light‐emitting diodes (OLEDs) on flexible substrates, yielding a luminance of ≈5000 cd m^?2.     

Self‐Organization of Inkjet‐Printed Organic Semiconductor Films Prepared in Inkjet‐Etched Microwells

The high‐precision deposition of highly crystalline organic semiconductors by inkjet printing is important for the production of printed organic transistors. Herein, a facile nonconventional lithographic patterning technique is developed for fabricating banks with microwell structures by inkjet printing solvent droplets onto a polymer layer, thereby locally dissolving the polymer to form microwells. The semiconductor ink is then inkjet‐printed into the microwells. In addition to confining the inkjet‐printed organic semiconductor droplets, the microwells provide a platform onto which organic semiconductor molecules crystallize during solvent evaporation. When printed onto the hydrophilic microwells, the inkjet‐printed 6,13‐bis(triisopropylsilylethynyl) pentacene (TIPS_PEN) molecules undergo self‐organization to form highly ordered crystalline structures as a result of contact line pinning at the top corner of the bank and the outward hydrodynamic flow within the drying droplet. By contrast, small crystallites form with relatively poor molecular ordering in the hydrophobic microwells as a result of depinning of the contact line along the walls of the microwells. Because pinning in the hydrophilic microwells occurred at the top corner of the bank, treating the surfaces of the dielectric layer with a hydrophobic organic layer does not disturb the formation of the highly ordered TIPS_PEN crystals. Transistors fabricated on the hydrophilic microwells and the hydrophobic dielectric layer exhibit the best electrical properties, which is explained by the solvent evaporation and crystallization characteristics of the organic semiconductor droplets in the microwell. These results indicate that this technique is suitable for patterning organic semiconductor deposits on large‐area flexible substrates for the direct‐write fabrication of high‐performance organic transistors.     

Direct Ink‐Jet Printing of Ag–Cu Nanoparticle and Ag‐Precursor Based Electrodes for OFET Applications

The field of organic electronics has seen tremendous progress over the last years and all‐solution‐based processes are believed to be one of the key routes to ultra low‐cost roll‐to‐roll device and circuit fabrication. In this regard a variety of functional materials has been successfully designed for inkjet printing. While orthogonal‐solvent approaches have frequently been used to tackle the solubility issue in multilayer solution processing, the focus of this work lies on printed metal electrodes for organic field‐effect transistors (OFET) and their curing concepts. Two metallic inkjet‐printable materials are studied: i) a silver‐copper nanoparticle based dispersion and ii) a soluble organic silver‐precursor. Photoelectron spectroscopy reveals largely metallic properties of the cured materials, which are compared with respect to OFET performance and process‐related issues. Contact resistance of the prepared metal electrodes is significantly larger than that of evaporated top‐contact gold electrodes. As direct patterning via inkjet printing limits the reliably achievable channel length to values well above 10 μm, the influence of contact resistance is rather small, however, and overall device performance is comparable.     

Cover Picture: Self‐Organization of Ink‐jet‐Printed Triisopropylsilylethynyl Pentacene via Evaporation‐Induced Flows in a Drying Droplet (Adv. Funct. Mater. 2/2008)

Charge carrier transport in organic electronic devices is influenced by the crystalline microstructure and morphology of the organic semiconductor film. Evaporation behavior during drying plays a vital role in controlling the film morphology and the distribution of solute in inkjet‐printed films. On p. 229, Kilwon Cho and co‐workers demonstrate the influence of the evaporation‐induced flow in a single droplet on the crystalline microstructure and film morphology of inkjet‐printed 6,13‐bis((triisopropylsilylethynyl) pentacene. The results provide an excellent method for direct‐write fabrication of high‐performance organic electronics. We have demonstrated the influence of evaporation‐induced flow in a single droplet on the crystalline microstructure and film morphology of an ink‐jet‐printed organic semiconductor, 6,13‐bis((triisopropylsilylethynyl) pentacene (TIPS_PEN), by varying the composition of the solvent mixture. The ringlike deposits induced by outward convective flow in the droplets have a randomly oriented crystalline structure. The addition of dichlorobenzene as an evaporation control agent results in a homogeneous film morphology due to slow evaporation, but the molecular orientation of the film is undesirable in that it is similar to that of the ring‐deposited films. However, self‐aligned TIPS_PEN crystals with highly ordered crystalline structures were successfully produced when dodecane was added. Dodecane has a high boiling point and a low surface tension, and its addition to the solvent results in a recirculation flow in the droplets that is induced by a Marangoni flow (surface‐tension‐driven flow), which arises during the drying processes in the direction opposite to the convective flow. The field‐effect transistors fabricated with these self‐aligned crystals via ink‐jet printing exhibit significantly improved performance with an average effective field‐effect mobility of 0.12 cm² V^–1 s^–1. These results demonstrate that with the choice of appropriate solvent ink‐jet printing is an excellent method for the production of organic semiconductor films with uniform morphology and desired molecular orientation for the direct‐write fabrication of high‐performance organic electronics.     

Inkjet Printing of a Highly Loaded Palladium Ink for Integrated,Low‐Cost pH Sensors

An inkjet printing process for depositing palladium (Pd) thin films from a highly loaded ink (>14 wt%) is reported. The viscosity and surface tension of a Pd‐organic precursor solution is adjusted using toluene to form a printable and stable ink. A two‐step thermolysis process is developed to convert the printed ink to continuous and uniform Pd films with good adhesion to different substrates. Using only one printing pass, a low electrical resistivity of 2.6 μΩ m of the Pd film is obtained. To demonstrate the electrochemical pH sensing application, the surfaces of the printed Pd films are oxidized for ion‐to‐electron transduction and the underlying layer is left for electron conduction. Then, solid‐state reference electrodes are integrated beside the bifunctional Pd electrodes by inkjet printing. These potentiometric sensors have sensitivities of 60.6 ± 0.1 and 57 ± 0.6 mV pH^?1 on glass and polyimide substrates, and short response times of 11 and 6 s, respectively. Also, accurate pH values of real water samples are obtained by using the printed sensors with a low‐cost multimeter. These results indicate that the facile and cost‐effective inkjet printing and integration techniques may be applied in fabricating future electrochemical monitoring systems for environmental parameters and human health conditions.     

Polypyrrole top-contact electrodes patterned by inkjet printing assisted vapor deposition polymerization in flexible organic thin-film transistors

Highly conductive polymer, polypyrrole (PPy) was successfully patterned as source and drain (S/D) electrodes for flexible pentacene thin film transistors in top-contact structure by combining inkjet printing and vapor deposition polymerization. Facile inkjet printing of initiator and subsequent exposure of pyrrole monomers resulted in selective absorption and polymerization of pyrrole monomers on the patterned initiator region. Pentacene transistors based on printed PPy electrodes exhibited higher electrical characteristics than that of the devices with thermally evaporated Au electrodes. Improved performance of the devices based on PPy electrodes could be attributed to the reduction of contact resistance at the interface between polymer and organic semiconductor. For the replacement of metal electrodes, vapor deposition polymerization assisted inkjet printing technique can provide a versatile method to utilize highly conductive polymer as a functional electrode of flexible organic electronic devices.     

Tuning the viscosity of halogen free bulk heterojunction inks for inkjet printed organic solar cells

For the solution processing of organic photovoltaics on an industrial scale, the exclusion of halogenated solvents is a necessity. However, the limited solubility of most semiconducting polymer/fullerene blends in non-halogenated solvents results in ink formulations with low viscosities which poses limitations to the use of roll-to-roll compatible deposition processes, such as inkjet printing. We propose to add polystyrene as a rheological modifier to increase the viscosity of bulk heterojunction (BHJ) non-halogenated inks. The printing and performance of P3HT/PCBM photoactive layer inks are characterized as a function of polystyrene concentration and three different molecular weights. Addition of 1 wt% polystyrene provided a near two-fold gain in viscosity, with the largest viscosity gains coming from the polymer with the highest molecular weight. However, this coincided with greater viscoelastic behavior, which reduced the jetting performance of the inks. Differences in solvent compatibility of the polystyrene/P3HT/PCBM ternary blend resulted in phase separation upon layer drying, whereby polystyrene segregated to the layer-air interface to form an isolated domain or network like topology. Nevertheless, a 1.7-fold increase in dynamic viscosity was obtained for devices with printed BHJ layers containing polystyrene at the expense of a 20% reduction in OPV performance. The improved viscosity and good printing behavior achieved with small additions of polystyrene demonstrates its potential to overcome the limited viscosity resulting from typical non-halogenated ink formulations for semiconducting polymers. These results offer a step forward to the industrialization of inkjet printing as an effective deposition technique for functional layers of organic electronics.     

Highly Customizable All Solution–Processed Polymer Light Emitting Diodes with Inkjet Printed Ag and Transfer Printed Conductive Polymer Electrodes

Inkjet and transfer printing processes are combined to easily form patterned poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) films as top anodes of all solution–processed inverted polymer light emitting diodes (PLEDs) on rigid glass and flexible plastic substrates. An adhesive PEDOT:PSS ink is formulated and fully customizable patterns are obtained using the inkjet printing process. In order to transfer the patterned PEDOT:PSS films, adhesion properties at interfaces during multistep transfer printing processes are carefully adjusted. The transferred PEDOT:PSS film on the plastic substrates shows not only a sheet resistance of 260.6 Ω/□ and a transmittance of 92.1% at 550 nm wavelength but also excellent mechanical flexibility. The PLEDs with spin‐coated functional layers sandwiched between the transferred PEDOT:PSS top anodes and inkjet‐printed Ag bottom cathodes are fabricated. The fabricated PLEDs on the plastic substrates show a high current efficiency of 10.4 cd A^?1 and high mechanical stability. It is noted that because both Ag and PEDOT:PSS electrodes can be patterned with a high degree of freedom via the inkjet printing process, highly customizable PLEDs with various pattern sizes and shapes are demonstrated on the glass and plastic substrates. Finally, with all solution process, a 5 × 7 passive matrix PLED array is demonstrated.     

Rapid Room‐Temperature Synthesis of Metal–Organic Framework HKUST‐1 Crystals in Bulk and as Oriented and Patterned Thin Films

Whereas the preparation of defined metal–organic framework (MOF) materials via hydrothermal or diffusion methods typically requires hours to days, our simple precipitation route opens the access to the well‐known HKUST‐1 frameworks within minutes. Crucial for the formation of a well‐defined, crystalline material is the choice of suitable precipitating solvents, with methanol and ethanol being the most favorable ones. This approach could be extended to the formation of dense, surface‐mounted MOF films (so‐called SURMOFs), in particular if the surfaces are decorated with suitable binding groups by formation of self‐assembled monolayers (SAMs). By combination with micro‐contact printing (μCP), patterned SURMOFs became accessible, in which the precipitating solvent is decisive on the formation of either spatially restricted films or single particles.     

Formation of low surface energy separators with undercut structures via a full-solution process and its application in inkjet printed matrix of polymer light-emitting diodes

In this paper, low surface energy separators with undercut structures were fabricated through a full-solution process. These low surface energy separators are more suitable for application in inkjet printed passive-matrix displays of polymer light-emitting diodes. A patterned PS film was formed on the P4VP/photoresist film by microtransfer printing firstly. Patterned Au-coated Ni film was formed on the uncovered P4VP/photoresist film by electroless deposition. This metal film was used as mask to pattern the photoresist layer and form undercut structures with the patterned photoresist layer. The surface energy of the metal film also decreased dramatically from 84.6 mJ/m² to 21.1 mJ/m² by modification of fluorinated mercaptan self-assemble monolayer on Au surface. The low surface energy separators were used to confine the flow of inkjet printed PFO solution and improve the patterning resolution of inkjet printing successfully. Separated PFO stripes, complement with the pattern of the separators, formed through inkjet printing. The separators also realized the patterning of cathodes. A passive-matrix display device was obtained through the assistant patterning of low surface energy separators.     

Metallic Architectures from 3D‐Printed Powder‐Based Liquid Inks

A new method for complex metallic architecture fabrication is presented, through synthesis and 3D‐printing of a new class of 3D‐inks into green‐body structures followed by thermochemical transformation into sintered metallic counterparts. Small and large volumes of metal‐oxide, metal, and metal compound 3D‐printable inks are synthesized through simple mixing of solvent, powder, and the biomedical elastomer, polylactic‐co‐glycolic acid (PLGA). These inks can be 3D‐printed under ambient conditions via simple extrusion at speeds upwards of 150 mm s^–1 into millimeter‐ and centimeter‐scale thin, thick, high aspect ratio, hollow and enclosed, and multi‐material architectures. The resulting 3D‐printed green‐bodies can be handled immediately, are remarkably robust, and may be further manipulated prior to metallic transformation. Green‐bodies are transformed into metallic counterparts without warping or cracking through reduction and sintering in a H₂ atmosphere at elevated temperatures. It is shown that primary metal and binary alloy structures can be created from inks comprised of single and mixed oxide powders, and the versatility of the process is illustrated through its extension to more than two dozen additional metal‐based materials. A potential application of this new system is briefly demonstrated through cyclic reduction and oxidation of 3D‐printed iron oxide constructs, which remain intact through numerous redox cycles.     

Rapid Prototyping for Soft‐Matter Electronics

A series of rapid and inexpensive methods to produce elastically soft sensors and circuits in minutes using a CO₂ laser (10.6 μm wavelength) are introduced. These soft‐matter electronics are composed of laser‐patterned films of conductive poly(dimethylsiloxane) (cPDMS) and liquid‐phase gallium–indium (GaIn) alloy embedded in a thin sheet of soft silicone elastomer. Direct laser patterning eliminates the need for photolithography, replica molding, and customized inkjet or microcontact (μCP) printing, and allows conductive traces of cPDMS and liquid GaIn to be rapidly integrated into a single soft‐matter circuit. The versatility of this fabrication method is demonstrated by the production of a variety of electrically functional soft‐matter sensors and circuit elements that contain features with >150 μm planar dimensions. It is postulate that in the case of GaIn alloy patterning occurs when the recoil force of the escaping vapor exceeds the liquid's surface tension. This mechanism exploits the unique “moldability” of liquid GaIn alloy, which forms a surface oxide of Ga₂O₃ that allows the patterned film to maintain its shape.     

Fabrication,Characterization, and Printing of Conductive Ink Based on Multi Core–Shell Nanoparticles Synthesized by RAPET

In the current research, conductive patterns are deposited on different substrates by direct inkjet printing of conductive inks based on metal@carbon and bimetal@carbon core–shell nanoparticles synthesized by the RAPET (reaction under autogenic pressure at elevated temperatures) technique. Various co‐solvents and additives are examined for production of stable conductive ink. The morphology of the deposited layers is characterized by optical and scanning electron microscopy measurements. The stability of the prepared inks is examined by dynamic light scattering measurements. The electrical resistivity is measured by a four‐point probe system and calculated using the geometric dimensions. The results obtained are very promising and indicate that the conductivity of the deposited layers is close to that of bulk metals and higher than most results published so far. Moreover, the importance and advantages of the protective carbon layer that prevents metal oxidation is demonstrated.     

Highly Emissive,Water‐Repellent,Soft Materials: Hydrophobic Wrapping and Fluorescent Plasticizing of Conjugated Polyelectrolyte via Electrostatic Self‐Assembly

Sulfonated poly(diphenylacetylene) (SPDPA) is used as an anionic conjugated polyelectrolyte to examine stoichiometric electrostatic self‐assembly with homologous cationic surfactants (octadecyl)_X(methyl)_Y ammonium bromides (O_XM_YABs) having different numbers of long hydrophobic tails. The SPDPA–O_XM_YAB complexes formed show significantly increased water contact angle and enhanced fluorescence (FL) emissions compared with the pristine SPDPA. The complexes exist in a gum state at room temperature owing to the plasticizer effect of the hydrophobic tails, hence they are very soft and highly stretchable. The hydrophobicity, softness, and FL quantum efficiency of the SPDPA–O_XM_YAB complexes increase as the number of hydrophobic tails increases. SPDPA adsorbs uniformly onto filter papers to produce fluorescent papers. The SPDPA‐adsorbed papers have many unique applications, including FL image writing, fingerprinting, stamping, and inkjet printing using the surfactant solutions as an ink to reveal high‐resolution FL images. In particular, multideposit inkjet‐printing using SPDPA and O_XM_YAB solutions as inks produces water‐resistant, embedded figures in paper currency.     

Inkjet‐Printed Organic Electrodes for Bottom‐Contact Organic Field‐Effect Transistors

A graphite thin film was investigated as the drain and source electrodes for bottom‐contact organic field‐effect transistors (BC OFETs). Highly conducting electrodes (10² S cm^?1) at room temperature were obtained from pyrolyzed poly(l,3,4‐oxadiazole) (PPOD) thin films that were prepatterned with a low‐cost inkjet printing method. Compared to the devices with traditional Au electrodes, the BC OFETs showed rather high performances when using these source/drain electrodes without any further modification. Being based on a graphite‐like material these electrodes possess excellent compatibility and proper energy matching with both p‐ and n‐type organic semiconductors, which results in an improved electrode/organic‐layer contact and homogeneous morphology of the organic semiconductors in the conducting channel, and finally a significant reduction of the contact resistance and enhancement of the charge‐carrier mobility of the devices is displayed. This work demonstrates that with the advantages of low‐cost, high‐performance, and printability, PPOD could serve as an excellent electrode material for BC OFETs.     

Control of the Morphology and Structural Development of Solution‐Processed Functionalized Acenes for High‐Performance Organic Transistors

Solution‐processable functionalized acenes have received special attention as promising organic semiconductors in recent years because of their superior intermolecular interactions and solution‐processability, and provide useful benchmarks for organic field‐effect transistors (OFETs). Charge‐carrier transport in organic semiconductor thin films is governed by their morphologies and molecular orientation, so self‐assembly of these functionalized acenes during solution processing is an important challenge. This article discusses the charge‐carrier transport characteristics of solution‐processed functionalized acene transistors and, in particular, focuses on the fine control of the films' morphologies and structural evolution during film‐deposition processes such as inkjet printing and post‐deposition annealing. We discuss strategies for controlling morphologies and crystalline microstructure of soluble acenes with a view to fabricating high‐performance OFETs.     

Inkjet Process for Conductive Patterning on Textiles: Maintaining Inherent Stretchability and Breathability in Knit Structures

In this work, a novel technique of inkjet printing e‐textiles with particle free reactive silver inks on knit structures is developed. The inkjet‐printed e‐textiles are highly conductive, with a sheet resistance of 0.09 Ω sq^‐1, by means of controlling the number of print passes, annealing process, and textile structures. It is notable that the inkjet process allows textiles to maintain its inherent properties, including stretchability, flexibility, breathability, and fabric hand after printing process. This is achieved by formation of ultrathin silver layers surrounding individual fibers. The silver layers coated on fibers range from 250 nm to 2.5 µm, maintaining the size of interstices and flexibility of fibers. The annealing process, structure of fibers, and printed layers significantly influence the electrical conductivity of the patterned structures on textiles. Outstanding electrical conductivity and durability are demonstrated by optimizing print passes, controlling textile structures, and incorporating an in situ annealing process. The electrical resistance dependence on the strain rate of the textiles is examined, showing the ability to maintain electrical conductivity to retain light‐emitting diode use, stable more than 500 consecutive strain cycles. Most importantly, inkjet‐printed e‐textiles maintain their characteristic washability, breathability, and fabric hands for applications in wearable technology.