Transition‐Metal‐Free Magnesium‐Based Batteries Activated by Anionic Insertion into Fluorinated Graphene Nanosheets

Considering resource abundance, high volumetric energy density, and safer anodic electroplating, the Mg‐based battery is thought to be one of the most promising systems beyond current Li‐ion batteries. However, the development of Mg batteries is hindered by the narrow electrochemical window of electrolytes as well as by inapplicable cathode frameworks. In this work, it is proposed, for the first time, to utilize a fast surface redox process to replace sluggish lattice migration for improving the kinetics of Mg batteries. Taking fluorinated graphene nanosheets (FGSs) as model material, a reversible capacity higher than 100 mAh g^?1 is achieved in a pseudocapacitance behavior from 2.75 to 0.5 V. Different from traditional storage mechanisms, this proof‐of‐concept Mg/FGS system is activated by a prior anionic process followed by reversible cationic storage. The dilution of charge density by forming large‐sized monovalent complex cations and the easy access to surface redox sites are responsible for the negligible voltage polarization without an evident MgF₂ nucleation phenomenon.     

A High‐k Fluorinated P(VDF‐TrFE)‐g‐PMMA Gate Dielectric for High‐Performance Flexible Field‐Effect Transistors

A newly synthesized high‐k polymeric insulator for use as gate dielectric layer for organic field‐effect transistors (OFETs) obtained by grafting poly(methyl methacrylate) (PMMA) in poly(vinylidene fluoride‐trifluoroethylene) (P(VDF‐TrFE)) via atom transfer radical polymerization transfer is reported. This material design concept intents to tune the electrical properties of the gate insulating layer (capacitance, leakage current, breakdown voltage, and operational stability) of the high‐k fluorinated polymer dielectric without a large increase in operating voltage by incorporating an amorphous PMMA as an insulator. By controlling the grafted PMMA percentage, an optimized P(VDF‐TrFE)‐g‐PMMA with 7 mol% grafted PMMA showing reasonably high capacitance (23–30 nF cm^?2) with low voltage operation and negligible current hysteresis is achieved. High‐performance low‐voltage‐operated top‐gate/bottom‐contact OFETs with widely used high mobility polymer semiconductors, poly[[2,5‐bis(2‐octyldodecyl)‐2,3,5,6‐tetrahydro‐3,6‐dioxopyrrolo [3,4‐c]pyrrole‐1,4‐diyl]‐alt‐[[2,2′‐(2,5‐thiophene)bis‐thieno(3,2‐b)thiophene]‐5,5′‐diyl]] (DPPT‐TT), and poly([N,N′‐bis(2‐octyldodecyl)‐naphthalene‐1,4,5,8‐bis(dicarboximide)‐2,6‐diyl]‐alt‐5,5′‐(2,2′‐bithiophene)) are demonstrated here. DPPT‐TT OFETs with P(VDF‐TrFE)‐g‐PMMA gate dielectrics exhibit a reasonably high field‐effect mobility of over 1 cm² V^?1 s^?1 with excellent operational stability.     

Fluorinated Polyimide as a Novel High‐Voltage Binder for High‐Capacity Cathode of Lithium‐Ion Batteries

An increase in the energy density of lithium‐ion batteries has long been a competitive advantage for advanced wireless devices and long‐driving electric vehicles. Li‐rich layered oxide, xLi₂MnO₃?(1?x)LiMn_1?y?zNi_yCo_zO₂, is a promising high‐capacity cathode material for high‐energy batteries, whose capacity increases by increasing charge voltage to above 4.6 V versus Li. Li‐rich layered oxide cathode however suffers from a rapid capacity fade during the high‐voltage cycling because of instable cathode–electrolyte interface, and the occurrence of metal dissolution, particle cracking, and structural degradation, particularly, at elevated temperatures. Herein, this study reports the development of fluorinated polyimide as a novel high‐voltage binder, which mitigates the cathode degradation problems through superior binding ability to conventional polyvinylidenefluoride binder and the formation of robust surface structure at the cathode. A full‐cell consisting of fluorinated polyimide binder‐assisted Li‐rich layered oxide cathode and conventional electrolyte without any electrolyte additive exhibits significantly improved capacity retention to 89% at the 100th cycle and discharge capacity to 223–198 mA h g^?1 even under the harsh condition of 55 °C and high charge voltage of 4.7 V, in contrast to a rapid performance fade of the cathode coated with polyvinylidenefluoride binder.     

Symmetric and Asymmetric Decoration of Graphene: Bimetal‐Graphene Sandwiches

Low‐dimensional carbon materials, i.e., graphene and its functionalization with a number of semiconductor or conductor materials, such as noble metal nanostructures, have primary importance for their potential exploitation as electro‐active materials, i.e., as new generation catalysts. Here, low‐cost, solution chemistry‐based, two‐step functionalization of an individual, free‐standing, chemical vapor‐deposited graphene monolayer is reported, with noble metal (Au, Pt, Pd) nanoparticles to build up two‐side decorated graphene‐based metal nanoclusters. Either the same metal (symmetric decoration) or different metals (asymmetric decoration) are used for the preparation of bimetal graphene sandwiches, which are adsorbed at the liquid/liquid (organic/water) interface. The successful fabrication of such dual‐decorated graphene‐based metal nanocomposites is confirmed using various microscopic techniques (scanning electron and atomic force microscopies) and several spectroscopic methods (x‐ray photoelectron, energy dispersive x‐ray, mapping mode Raman spectroscopy, and electron energy loss spectroscopy). Taken together, it is inferred from these techniques that the location of deposited metal nanoparticles is on opposite sides of the graphene.     

Self‐Healing Graphene Oxide Based Functional Architectures Triggered by Moisture

Self‐healing materials are capable of spontaneously repairing themselves at damaging sites without additional adhesives. They are important functional materials with wide applications in actuators, shape memorizing materials, smart coatings, and medical treatments, etc. Herein, this study reports the self‐healing of graphene oxide (GO) functional architectures and devices with the assistance of moisture. These GO architectures can completely restore their mechanical‐performance (e.g., compressibility, flexibility, and strength) after healing their broken sites using a little amount of water moisture. On the basis of this effective moisture‐triggered self‐healing process, this study develops GO smart actuators (e.g., bendable actuator, biomimetic walker, rotatable fiber motor) and sensors with self‐healing ability. This work provides a new pathway for the development of self‐healing materials for their applications in multidimensional spaces and functional devices.     

Self‐Assembling TiO2 Nanorods on Large Graphene Oxide Sheets at a Two‐Phase Interface and Their Anti‐Recombination in Photocatalytic Applications

TiO₂ nanorods are self‐assembled on the graphene oxide (GO) sheets at the water/toluene interface. The self‐assembled GO–TiO₂ nanorod composites (GO–TiO₂ NRCs) can be dispersed in water. The effective anchoring of TiO₂ nanorods on the whole GO sheets is confirmed by transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform IR spectroscopy (FTIR), and thermogravimetric analysis (TGA). The significant increase of photocatalytic activity is confirmed by the degradation of methylene blue (MB) under UV light irridiation. The large enhancement of photocatalytic activity is caused by the effective charge anti‐recombination and the effective absorption of MB on GO. The effective charge transfer from TiO₂ to GO sheets is confirmed by the significant photoluminescence quenching of TiO₂ nanorods, which can effectively prevent the charge recombination during photocatalytic process. The effective absorption of MB on GO is confirmed by the UV‐vis spectra. The degradation rate of MB in the second cycle is faster than that in the first cycle because of the reduction of GO under UV light irradiation.     

Graphene Oxide‐Based Lamella Network for Enhanced Sound Absorption

Noise is an environmental pollutant with recognized impacts on the psychological and physiological health of humans. Many porous materials are often limited by low sound absorption over a broad frequency range, delicacy, excessive weight and thickness, poor moisture insulation, high temperature instability, and lack of readiness for high volume commercialization. Herein, an efficient and robust lamella‐structure is reported as an acoustic absorber based on self‐assembled interconnected graphene oxide (GO) sheets supported by a grill‐shaped melamine skeleton. The fabricated lamella structure exhibits ≈60.3% enhancement over a broad absorption band between 128 and 4000 Hz (≈100% at lower frequencies) compared to the melamine foam. The enhanced acoustic absorption is identified to be structure dependent regardless of the density. The sound dissipation in the open‐celled structure is due to the viscous and thermal losses, whereas it is predominantly tortuosity in wave propagation and enhanced surface area for the GO‐based lamella. In addition to the enhanced acoustic absorption and mechanical robustness, the lamella provides superior structural functionality over many conventional sound absorbers including, moisture/mist insulation and fire retardancy. The fabrication of this new sound absorber is inexpensive, scalable and can be adapted for extensive applications in commercial, residential, and industrial building structures.     

A Generic Synthetic Approach to Large‐Scale Pristine‐Graphene/Metal‐Nanoparticles Hybrids

The homogeneous attachment of metal‐nanoparticles (metal‐NPs) on pristine‐graphene surface to construct pristine‐graphene/metal‐NPs hybrids is highly expected for application in many fields such as transparent electrodes and conductive composites. However, it remains a great challenge since the pristine‐graphene is highly hydrophobic. Here, an environmentally friendly generic synthetic approach to large‐scale pristine‐graphene/metal‐NPs hybrids is presented, by a combinatorial process of exfoliating expanded graphite in N‐methyl pyrrolidone via sonication and centrifugation to achieve the pristine‐graphene, and attaching pre‐synthesized metal‐NPs on the pristine‐graphene in ethanol via van der Waals interactions between the metal‐NPs and the pristine‐graphene. Nanoparticles of different metals (such as Ag, Au, and Pd) with various morphologies (such as sphere, cube, plate, multi‐angle, and spherical‐particle assembling) can be homogeneously attached on the defect‐free pristine‐graphene with controlled packing densities. Both the pristine‐graphene and the metal‐NPs preserve their original intrinsic structures. The as‐synthesized pristine‐graphene/Ag‐NPs hybrids show very high surface‐enhanced Raman scattering activity due to the combined effects of large surface area of the pristine‐graphene to adsorb more target molecules and the electromagnetic enhancement of the Ag‐NPs. This large‐scale synthesis of the pristine‐graphene/metal‐NPs hybrids with tunable shape and packing density of metal‐NPs opens up opportunities for fundamental research and potential applications ranging from devices to transparent electrodes and conductive composites.     

GeOx/Reduced Graphene Oxide Composite as an Anode for Li‐Ion Batteries: Enhanced Capacity via Reversible Utilization of Li2O along with Improved Rate Performance

A self‐assembled GeO_x/reduced graphene oxide (GeO_x/RGO) composite, where GeO_x nanoparticles are grown directly on reduced graphene oxide sheets, is synthesized via a facile one‐step reduction approach and studied by X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray spectroscopy, electron energy loss spectroscopy elemental mapping, and other techniques. Electrochemical evaluation indicates that incorporation of reduced graphene oxide enhances both the rate capability and reversible capacity of GeO_x, with the latter being due to the RGO enabling reversible utilization of Li₂O. The composite delivers a high reversible capacity of 1600 mAh g^?1 at a current density of 100 mA g^?1, and still maintains a capacity of 410 mAh g^?1 at a high current density of 20 A g^?1. Owing to the flexible reduced graphene oxide sheets enwrapping the GeO_x particles, the cycling stability of the composite is also improved significantly. To further demonstrate its feasibility in practical applications, the synthesized GeO_x/RGO composite anode is successfully paired with a high voltage LiNi_0.5Mn_1.5O₄ cathode to form a full cell, which shows good cycling and rate performance.     

Revisiting the Structure of Graphene Oxide for Preparing New‐Style Graphene‐Based Ultraviolet Absorbers

Despite sustained effort over the years, the exploration of an effective strategy toward understanding the structure and properties of graphene oxide (GO) is still highly desirable. Herein, a facile route to revisit the structure of GO is demonstrated by elucidating its chemical‐conversion process solely in the presence of ammonia. Such a strategy can contribute to settling some arguments in recent models of GO, and also offers a prerequisite to identify critical components that can act as ultraviolet absorbers (UVAs) in resulting dispersions of nitrogen‐doped graphene sheets (NGSs). Inspired by this, for the first time, the performance of NGSs, serving as new‐style UVAs, is investigated through directly assessing the effect of NGSs on the photofastness of azo dyes (Food Black). These studies reveal that, distinct from the common understanding, the as‐prepared NGSs can dramatically enhance the photostability of Food Black under UV irradiation and exhibit greatly applied potential as a multifunctional UVA for new‐generation inkjet inks that can simultaneously integrate the advantages of dye‐based and pigment‐based inks.     

Capacitive Enhancement Mechanisms and Design Principles of High‐Performance Graphene Oxide‐Based All‐Solid‐State Supercapacitors

Graphene oxide (GO)‐based all‐solid‐state supercapacitors (GO‐A3Ss) are superior over liquid electrolyte‐based supercapacitors and capable of being integrated on a single chip in various geometry shapes for the use of future smart wearable electronics field as a fast energy storage device, but their capacitance need to be improved. Here, a new approach has been developed for enhancing the capacitive capability of the supercapacitors through molecular dynamics simulations with the first‐principle input. A theoretical model of charge storage is developed to understand the unique capacitive enhancement mechanism and to predict the capacitance of the GO‐A3Ss, which agrees well with the experimental observations. A novel supercapacitor with GO and reduced graphene oxide (rGO) alternatively layered structures is designed based on the model, and its energy density is the highest among conventional supercapacitors using liquid electrolytes and all‐solid‐state supercapacitors using aerogels or hydrogels as the solid‐state electrolyte. Based on the predictions, two new types of high‐performance GO/rGO multilayered capacitors are proposed to meet different practical applications. The results of this work provide an approach for the design of high‐performance all‐solid‐state supercapacitors based on GO and rGO materials.     

Oxygen‐Free Highly Conductive Graphene Papers

Graphene papers have a potential to overcome the gap from nanoscale graphene to real macroscale applications of graphene. A unique process for preparation of highly conductive graphene thin paper by means of Ar⁺ ion irradiation of graphene oxide (GO) papers, with carbon/oxygen ratio reduced to 100:1, is presented. The composition of graphene paper in terms of carbon/oxygen ratio and in terms of types of individual oxygen‐containing groups is monitored throughout the process. Angle‐resolved high resolution X‐ray photoelectron spectroscopy helps to investigate the depth profile of carbon and oxygen within reduced GO paper. C/O ratios over 100 on the surface and 40 in bulk material are observed. In order to bring insight to the processes of oxygen removal from GO paper by low energy Ar⁺ ion bombardment, the gases released during the irradiation are analyzed by mass spectroscopy. It is proven that Ar⁺ ion beam can be applied as a technique for fabrication of highly reduced graphene papers with high conductivities. Such highly conductive graphene papers have great potential to be used in application for construction of microelectronic and sensor devices.     

Multifunctional Graphene Oxide‐based Triple Stimuli‐Responsive Nanotheranostics

Construction of multifunctional stimuli‐responsive nanosystems intelligently responsive to inner physiological and/or external irradiations based on nanobiotechnology can enable the on‐demand drug release and improved diagnostic imaging to mitigate the side‐effects of anticancer drugs and enhance the diagnostic/therapeutic outcome simultaneously. Here, a triple‐functional stimuli‐responsive nanosystem based on the co‐integration of superparamagnetic Fe₃O₄ and paramagnetic MnO_x nanoparticles (NPs) onto exfoliated graphene oxide (GO) nanosheets by a novel and efficient double redox strategy (DRS) is reported. Aromatic anticancer drug molecules can interact with GO nanosheets through supramolecular π stacking to achieve high drug loading capacity and pH‐responsive drug releasing performance. The integrated MnO_x NPs can disintegrate in mild acidic and reduction environment to realize the highly efficient pH‐responsive and reduction‐triggered T₁‐weighted magnetic resonance imaging (MRI). Superparamagnetic Fe₃O₄ NPs can not only function as the T₂‐weighted contrast agents for MRI, but also response to the external magnetic field for magnetic hyperthermia against cancer. Importantly, the constructed biocompatible GO‐based nanoplatform can inhibit the metastasis of cancer cells by downregulating the expression of metastasis‐related proteins, and anticancer drug‐loaded carrier can significantly reverse the multidrug resistance (MDR) of cancer cells.     

Effects of Channel Electron In‐Plane Velocity on the Capacitance‐Voltage Curve of MOS Devices

The coupling between the transverse and longitudinal components of the channel electron motion in NMOS devices leads to a reduction in the barrier height. Therefore, this study theoretically investigates the effects of the in‐plane velocity of channel electrons on the capacitance‐voltage characteristics of nano NMOS devices under inversion bias. Numerical calculation via a self‐consistent solution to the coupled Schrödinger equation and Poisson equation is used in the investigation. The results demonstrate that such a coupling largely affects capacitance‐voltage characteristic when the in‐plane velocity of channel electrons is high. The ballistic transport ensures a high in‐plane momentum. It suggests that such a coupling should be considered in the quantum capacitance‐voltage modeling in ballistic transport devices.     

Graphene Oxide Gel‐Derived,Free‐Standing,Hierarchically Porous Carbon for High‐Capacity and High‐Rate Rechargeable Li‐O2 Batteries

Lithium‐oxygen (Li‐O₂) batteries are one of the most promising candidates for high‐energy‐density storage systems. However, the low utilization of porous carbon and the inefficient transport of reactants in the cathode limit terribly the practical capacity and, in particular, the rate capability of state‐of‐the‐art Li‐O₂ batteries. Here, free‐standing, hierarchically porous carbon (FHPC) derived from graphene oxide (GO) gel in nickel foam without any additional binder is synthesized by a facile and effective in situ sol‐gel method, wherein the GO not only acts as a special carbon source, but also provides the framework of a 3D gel; more importantly, the proper acidity via its intrinsic COOH groups guarantees the formation of the whole structure. Interestingly, when employed as a cathode for Li‐O₂ batteries, the capacity reaches 11 060 mA h g^?1 at a current density of 0.2 mA cm^?2 (280 mA g^?1); and, unexpectedly, a high capacity of 2020 mA h g^?1 can be obtained even the current density increases ten times, up to 2 mA cm^?2 (2.8 A g^?1), which is the best rate performance for Li‐O₂ batteries reported to date. This excellent performance is attributed to the synergistic effect of the loose packing of the carbon, the hierarchical porous structure, and the high electronic conductivity of the Ni foam.     

Unraveling Metal Oxide Role in Exfoliating Graphite: New Strategy to Construct High‐Performance Graphene‐Modified SiOx‐Based Anode for Lithium‐Ion Batteries

Exfoliating graphite to graphene has attracted great attention due to the fantastic properties of graphene available for designing graphene‐based materials or devices. Besides the classic solution method, herein a unique role of TiO₂ in exfoliating graphite to be graphene layers effectively is reported. As a paradigm, this discovered effect of TiO₂ is significant for preparing high‐performance graphene‐modified SiO_x‐based anode in lithium‐ion batteries (LIBs), in which the graphite is in situ exfoliated mechanically by TiO₂ to be multilayered graphene (i.e., MLG) and then the SiO_x is wrapped by the MLG to construct a SiO_x/TiO₂@MLG. In this case, an extremely high capacity of 1484 mAh g^?1, long lifespan over 1200 cycles at 2 A g^?1, as well as good performance in full LIBs (vs nickel‐rich cathode) are demonstrated. It is confirmed that the MLG can enhance electric conductivity, mitigate electrolyte decomposition, and alleviate volume effect of the SiO_x effectively. This result is hard to be achieved using other kinds of metal oxide besides TiO₂. It is hoped that the SiO_x/TiO₂@MLG is practical for pursuing LIBs with an energy density beyond 300 Wh kg^?1. In addition, it is believed the ingenious strategy is applicable for designing more functional materials with greater capabilities.     

Direct Growth of Nanographene on Silicon with Thin Oxide Layer for High‐Performance Nanographene‐Oxide‐Silicon Diodes

Graphene‐silicon based configurations are attracting great attention for their potential application as electronics and optoelectronics. For their practical use, it is still limited by the configuration fabrication process. In this paper, a catalyst‐free method is reported to directly grow nanographene on silicon covered with a thin oxide layer to form nanographene‐oxide‐silicon configurations. Compared with previously reported nanographene‐silicon Schottky junctions, the nanographene‐oxide‐silicon structures exhibit a high performance on electronic and photovoltaic properties. The reverse leakage current of the nanographene‐oxide‐silicon is suppressed from over 10^?5 A down to 10^?8 A and the rectifier ratio is greatly enhanced from less than 5 up to 10³. The photovoltage is enhanced over 50 times. The nanographene‐oxide‐silicon structures exhibit especially ultrasensitive to weak light at a photovoltage working mode, which exceeds up to 10⁶ V/W at the light power of 0.025 μW. Due to the source material for nanographene is photoresist and the fabrication process is mainly based on the current‐used photolithography and silicon technique, the developed nanographene‐oxide‐silicon structures are very easy for device fabrication, integration, and miniaturization, and could be a promising way to produce metal‐free graphene‐silicon based electronics and optoelectronics for commercial use.     

Structure‐Properties Relationship in Iron Oxide‐Reduced Graphene Oxide Nanostructures for Li‐Ion Batteries

Non‐aqueous sol‐gel routes involving the reaction of metal oxide precursors in organic solvents (e.g., benzyl alcohol) at moderate temperature and pressure, offer advantages such as high purity, high reproducibility and the ability to control the crystal growth without the need of using additional ligands. In this paper, a study carried out on a series of iron oxide/reduced graphene oxide composites is presented to elucidate a structure‐properties relationship leading to an improved electrochemical performance of such composites. Moreover, it is demonstrated that the easy production of the composites in a variety of temperature and composition ranges, allows a fine control over the final particles size, density and distribution. The materials obtained are remarkable in terms of the particle's size homogeneity and dispersion onto the reduced graphene oxide surface. Moreover, the synthesis method used to obtain the graphene oxide clearly affects the performances of the final composites through the control of the restacking of the reduced graphene oxide sheets. It is shown that a homogeneous and less defective reduced graphene oxide enables good electrochemical performances even at high current densities (over 500 mAh/g delivered at current densities as high as 1600 mA/g). The electrochemical properties of improved samples reach the best compromise between specific capacity, rate capability and cycle stability reported so far.     

Conductive Graphitic Channel in Graphene Oxide‐Based Memristive Devices

Electrically insulating graphene oxide with various oxygen‐functional groups is a novel material as an active layer in resistive switching memories via reduction process. Although many research groups have reported on graphene oxide‐based resistive switching memories, revealing the origin of conducting path in a graphene oxide active layer remains a critical challenge. Here nanoscale conductive graphitic channels within graphene oxide films are reported using a low‐voltage spherical‐aberration‐corrected transmission electron microscopy. Simultaneously, these channels with reduced graphene oxide nanosheets induced by the detachment of oxygen groups are verified by Raman intensity ratio map and conductive atomic force microscopy. It is also clearly revealed that Al metallic protrusions, which are generated in the bottom interface layer, assist the local formation of conductive graphitic channels directly onto graphene oxide films by generating a local strong electric field. This work provides essential information for future carbon‐based nanoelectronic devices.