The impurity photovoltaic (IPV) effect in wide‐bandgap semiconductors: an opportunity for very‐high‐efficiency solar cells?

Following recent progress in the study of limiting efficiencies of photovoltaic devices with multiple energy levels, we suggest using the impurity photovoltaic (IPV) effect in wide‐bandgap semiconductors as a means to achieve very‐high‐efficiency solar cells. We discuss the requirements for a high‐efficiency IPV device and review some of the material systems that could be used. As a case study, we investigate theoretically β‐SiC IPV solar cells with a model based on a modified Shockley–Read–Hall theory. The high‐efficiency potential is confirmed and the important issues for implementation are presented and discussed. Copyright © 2002 John Wiley &; Sons, Ltd.     

Do built‐in fields improve solar cell performance?

Intrinsic fields can be built into solar cells by varying the doping level and/or the cell bandgap with potential benefits long recognised. A counteracting effect is that varying the doping or bandgap from the optimum for a particular material system will result in poorer material quality. New solutions are described to the standard semiconductor transport and recombination equations that allow such effects to be incorporated and the impact of these fields on device current and voltage to be assessed. Clear boundaries are found between when built‐in fields are beneficial or deleterious. For the case of doping gradients, built‐in fields decrease both cell current and voltage if carrier lifetime decrease more quickly than as the inverse square of doping; decrease current but can increase voltage if the inverse variation is between linear and square; can improve both if less than linear but only significantly if lifetime varies less than the inverse square root of doping. In the case of a graded bandgap, an optimal field exists as a trade‐off between decreased absorption and increased carrier collection. Copyright © 2008 John Wiley & Sons, Ltd.     

Nematic Phases in 1,2,4‐Oxadiazole‐Based Bent‐Core Liquid Crystals: Is There a Ferroelectric Switching?

Four series of new 1,2,4‐oxadiazole derived bent‐core liquid crystals incorporating one or two cyclohexane rings are synthesized and investigated by optical polarizing microscopy, differential scanning calorimetry (DSC), X‐ray diffraction (XRD), electro‐optical, and dielectric investigations. All the compounds exhibit wide ranges of nematic phases composed of tilted smectic (SmC‐type) cybotactic clusters with strongly tilted aromatic cores (40–57°) and show a distinct peak in the current curves observed under a triangular wave field. Dielectric spectroscopy of aligned samples corroborates the previously proposed polar structure of the cybotactic clusters and the ferroelectric‐like polar switching of these nematic phases. Hence, it is shown that this is a general feature of the nematic phases of structurally different 3,5‐diphenyl‐1,2,4‐oxadiazole derivatives. In these uniaxial nematic phases there is appreciable local biaxiality and polar order in the cybotactic clusters. As a second point it is shown that electric field induced fan‐like textures, as often observed for the nematic phases of bent‐core liquid crystals, do not indicate the formation of a smectic phase, rather they represent special electro‐convection patterns due to hydrodynamic instabilities.     

Plasmonic Enhancement or Energy Transfer? On the Luminescence of Gold‐, Silver‐, and Lanthanide‐Doped Silicate Glasses and Its Potential for Light‐Emitting Devices

With the technique of synchrotron X‐ray activation, molecule‐like, non‐plasmonic gold and silver particles in soda‐lime silicate glasses can be generated. The luminescence energy transfer between these species and lanthanide(III) ions is studied. As a result, a significant lanthanide luminescence enhancement by a factor of up to 250 under non‐resonant UV excitation is observed. The absence of a distinct gold and silver plasmon resonance absorption, respectively, the missing nanoparticle signals in previous SAXS and TEM experiments, the unaltered luminescence lifetime of the lanthanide ions compared to the non‐enhanced case, and an excitation maximum at 300–350 nm (equivalent to the absorption range of small noble metal particles) indicate unambiguously that the observed enhancement is due to a classical energy transfer between small noble metal particles and lanthanide ions, and not to a plasmonic field enhancement effect. It is proposed that very small, molecule‐like noble metal particles (such as dimers, trimers, and tetramers) first absorb the excitation light, undergo a singlet‐triplet intersystem crossing, and finally transfer the energy to an excited multiplet state of adjacent lanthanide(III) ions. X‐ray lithographic microstructuring and excitation with a commercial UV LED show the potential of the activated glass samples as bright light‐emitting devices with tunable emission colors.     

Does Electronic Type Matter when Single‐Walled Carbon Nanotubes are Used for Electrode Applications?

Single‐walled carbon nanotube (SWNT) electrodes that are chemically and mechanically robust are fabricated using a simple drop cast method with thermal annealing and acid treatment. An electronic‐type selective decrease in sheet resistance of SWNT electrodes with HNO₃ treatment is shown. Semiconducting SWNTs show a significantly higher affinity toward hole doping in comparison to metallic SWNTs; a ≈12‐fold and a ≈fivefold drop in sheet resistance, respectively. The results suggest the insignificance of the electronic type of the SWNTs for the film conductivity after hole doping. The SWNT films have been employed as transparent hole extracting electrodes in bulk heterojunction (BHJ) organic photovoltaics. Performances of the devices enlighten the fact that the electrode film morphology dominates over the electronic type of the doped SWNTs with similar sheet resistance and optical transmission. The power conversion efficiency (PCE) of 4.4% for the best performing device is the best carbon nanotube transparent electrode incorporated large area BHJ solar cell reported to date. This PCE is 90% in terms of PCEs achieved using indium tin oxide (ITO) based reference devices with identical film fabrication parameters indicating the potential of the SWNT electrodes as an ITO replacement toward realization of all carbon solar cells.     

SHORT COMMUNICATION: Does climate change affect the design of stand‐alone PV systems?

This paper investigates the effect of using sequences of past daily solar radiation data on PV system sizing for the case of Efford (UK). For a given system configuration that never sheds load, the lowest SOC reached by the battery is found by an energy balance model, and the energy deficit calculated for a given climatic cycle. Although the average irradiation changes little during the years 1958–1994, there is a substantial increase in the storage requirement, which seems to be related with an increase in the persistence of low solar radiation values. Copyright © 2005 John Wiley & Sons, Ltd.     

Brookite Formation in TiO2?Ag Nanocomposites and Visible‐Light‐Induced Templated Growth of Ag Nanostructures in TiO2

TiO₂? Ag‐nanocomposites exhibit various desirable properties that make them suitable for a variety of applications, for example in photocatalysis and as bactericidal coatings. In this work, a new method for processing TiO₂? Ag nanocomposites is presented. The nanocomposite films are fabricated from one precursor solution with high silver loading of up to 50%. The resulting films exhibit a microstructure consisting of TiO₂? Ag_xO nanocomposites with a largely XRD‐amorphous TiO₂ matrix containing brookite nanocrystals. This specific microstructure absorbs in the visible range so that photoreduction of Ag ions can be accomplished by using visible light. The thin films can be patterned using simple shadow masks. The illuminated areas show a high density of self‐organized nanoparticles (SNPs) and nanorods (SNRs), which are templated by the TiO₂ porous network. The particle size can be tuned by varying the irradiation time. Most of the SNPs and SNRs form faceted crystals, which are mostly a combination of {111} and {110}. The application of these films as substrates for surface‐enhanced Raman scattering is shown. Enhancement factors as high as 4.6 × 10⁶ could be obtained using rhodamine 6G dye molecules. More applications should involve photocatalytic water purification using visible light.     

Light Out‐Coupling Management in Perovskite LEDs—What Can We Learn from the Past?

The research on perovskite light‐emitting diodes (PeLEDs) has experienced an exponential growth in the past six years. The highest external quantum efficiencies (EQEs) have surpassed 20%, 20%, and 10% for red, green, and blue colored LEDs, respectively. Considering the internal quantum efficiency is already approaching unity owing to the high material quality, the limiting factor for further improving the EQE is mainly the poor light out‐coupling efficiencies. Here, by reviewing the progress on the light out‐coupling studies for PeLEDs, organic LEDs (OLEDs), conventional semiconductor LEDs, and other special LEDs, the rational design guidelines are summarized for enhancing PeLED out‐coupling. Briefly, these design guidelines include: 1) introducing nanostructures into the active layer or tuning the thickness of it to couple out the waveguide modes, 2) adding nanostructures between the active layer and transparent electrodes to couple the waveguide modes to substrate modes, 3) adding nanostructures such as nanowires to the glass substrate to couple the substrate mode to air. Essentially, these guidelines indicate that implementing nanophotonic engineering on PeLEDs is a highly promising direction to explore, so as to substantially enhance the device performance.     

Attitude Change in Competitive Framing Environments? Open‐/Closed‐Mindedness,Framing Effects,and Climate Change

Framing scholarship on policy issues has primarily focused on how competitive message environments alter framing effects or how individual differences moderate the impact of frames. This study combines both of these focal areas by examining how individual open‐/closed‐mindedness moderates framing effects about climate change within competitive and noncompetitive framing contexts. Contrary to previous scholarship, our experimental study finds effects on attitudes in the competitive framing condition, but not the noncompetitive framing condition. The framing effects found in the competitive condition were contingent upon individual differences in open‐/closed‐mindedness. Analysis shows that individual open‐/closed‐mindedness influences framing effects in part by altering the effects of frame exposure on the perceived costs and benefits of government climate policies.     

Hierarchical Ni?Mo?S and Ni?Fe?S Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni? Mo? S and Ni? Fe? S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni? Mo? S and Ni? Fe? S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni? Mo? S and Ni? Fe? S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni? Mo? S NS//Ni? Fe? S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

Involved,Transported, or Emotional? Exploring the Determinants of Change in Knowledge,Attitudes, and Behavior in Entertainment‐Education

This study examined how 3 constructs—involvement with a specific character, involvement with the narrative (Green and Brock's construct of transportation), and viewers' emotional reaction to the narrative—produce entertainment‐education (EE) effects. A pretest/posttest survey of 167 regular viewers measured the effects of exposure to a lymphoma storyline on a television drama, Desperate Housewives. Transportation or involvement with the narrative was the best predictor of change in relevant knowledge, attitudes, and behavior. Although involvement with a specific character has been hailed an important direct predictor of EE effects, a structural equation model indicated that character involvement may be more important for its ability to heighten transportation and emotion, which, in turn, produce changes in viewers' knowledge, attitudes, and behavior.     

Carbon Black-Supported Single-Atom Co?N?C as an Efficient Oxygen Reduction Electrocatalyst for H2O2 Production in Acidic Media and Microbial Fuel Cell in Neutral Media

Single metal atom isolated in nitrogen-doped carbon materials (M N C) are effective electrocatalysts for oxygen reduction reaction (ORR), which produces H₂O₂ or H₂O via 2-electron or 4-electron process. However, most of M N C catalysts can only present high selectivity for one product, and the selectivity is usually regulated by complicated structure design. Herein, a carbon black-supported Co N C catalyst (CB@Co N C) is synthesized. Tunable 2-electron/4-electron behavior is realized on CB@Co-N-C by utilizing its H₂O₂ yield dependence on electrolyte pH and catalyst loading. In acidic media with low catalyst loading, CB@Co N C presents excellent mass activity and high selectivity for H₂O₂ production. In flow cell with gas diffusion electrode, a H₂O₂ production rate of 5.04 mol h⁻¹ g⁻¹ is achieved by CB@Co N C on electrolyte circulation mode, and a long-term H₂O₂ production of 200 h is demonstrated on electrolyte non-circulation mode. Meanwhile, CB@Co N C exhibits a dominant 4-electron ORR pathway with high activity and durability in pH neutral media with high catalyst loading. The microbial fuel cell using CB@Co N C as the cathode catalyst shows a peak power density close to that of benchmark Pt/C catalyst.