Adsorption of dissolved natural organic matter by modified activated carbons

Adsorption of dissolved natural organic matter (DOM) by virgin and modified granular activated carbons (GACs) was studied. DOM samples were obtained from two water treatment plants before (i.e., raw water) and after coagulation/flocculation/sedimentation processes (i.e., treated water). A granular activated carbon (GAC) was modified by high temperature helium or ammonia treatment, or iron impregnation followed by high temperature ammonia treatment. Two activated carbon fibers (ACFs) were also used, with no modification, to examine the effect of carbon porosity on DOM adsorption. Size exclusion chromatography (SEC) and specific ultraviolet absorbance (SUVA(254)) were employed to characterize the DOMs before and after adsorption. Iron-impregnated (HDFe) and ammonia-treated (HDN) activated carbons showed significantly higher DOM uptakes than the virgin GAC. The enhanced DOM uptake by HDFe was due to the presence of iron species on the carbon surface. The higher uptake of HDN was attributed to the enlarged carbon pores and basic surface created during ammonia treatment. The SEC and SUVA(254) results showed no specific selectivity in the removal of different DOM components as a result of carbon modification. The removal of DOM from both raw and treated waters was negligible by ACF10, having 96% of its surface area in pores smaller than 1 nm. Small molecular weight (MW) DOM components were preferentially removed by ACF20H, having 33% of its surface area in 1--3 nm pores. DOM components with MWs larger than 1600, 2000, and 2700 Da of Charleston raw, Charleston-treated, and Spartanburg-treated waters, respectively, were excluded from the pores of ACF20H. In contrast to carbon fibers, DOM components from entire MW range were removed from waters by virgin and modified GACs.     

An overall isotherm for activated carbon adsorption of dissolved natural organic matter in water

Design and analysis of activated carbon processes in water treatment often requires the adsorption isotherm for dissolved natural organic matter (NOM). Of the isotherm models available, the Summers and Roberts (SR) equation, capable of describing the adsorbent dose effect with the fewest parameters, has been successfully used to normalize NOM isotherm data. In this study, we show that the adsorbent dose in the SR equation can be eliminated as an intermediate variable and the initial concentration effect on NOM adsorption is then described explicitly. Comparing with the original SR equation, the derived isotherm equation is in a form more amenable to analysis. To ensure that the prediction is physically attainable, we introduced the limiting adsorption capacity by taking the adsorbent pore volume and size exclusion into consideration. Subsequently, we develop a simple relationship that can be used to determine the minimum adsorbent usage required for any desirable level of treatment. By comparing with extensive isotherm data previously published by Li et al. [2003a. Polydisperse adsorbability composition of several natural and synthetic organic matrices. J. Colloid Interface Sci. 265(2), 265-275], we demonstrated that the isotherm equation derived herein yields predictions that agree with the much more complicated fictive component-ideal adsorbed solution theory (IAST)-based model for NOM from different sources and over a range of initial concentrations.     

The effects of dissolved natural organic matter on the adsorption of synthetic organic chemicals by activated carbons and carbon nanotubes

Understanding the influence of natural organic matter (NOM) on synthetic organic contaminant (SOC) adsorption by carbon nanotubes (CNTs) is important for assessing the environmental implications of accidental CNT release and spill to natural waters, and their potential use as adsorbents in engineered systems. In this study, adsorption of two SOCs by three single-walled carbon nanotubes (SWNTs), one multi-walled carbon nanotube (MWNT), a microporous activated carbon fiber (ACF) [i.e., ACF10] and a bimodal porous granular activated carbon (GAC) [i.e., HD4000] was compared in the presence and absence of NOM. The NOM effect was found to depend strongly on the pore size distribution of carbons. Minimal NOM effect occurred on the macroporous MWNT, whereas severe NOM effects were observed on the microporous HD4000 and ACF10. Although the single-solute adsorption capacities of the SWNTs were much lower than those of HD4000, in the presence of NOM the SWNTs exhibited adsorption capacities similar to those of HD4000. Therefore, if released into natural waters, SWNTs can behave like an activated carbon, and will be able to adsorb, carry, and transfer SOCs to other systems. However, from an engineering application perspective, CNTs did not exhibit a major advantage, in terms of adsorption capacities, over the GAC and ACF. The NOM effect was also found to depend on molecular properties of SOCs. NOM competition was more severe on the adsorption of 2-phenylphenol, a nonplanar and hydrophilic SOC, than phenanthrene, a planar and hydrophobic SOC, tested in this study. In terms of surface chemistry, both adsorption affinity to SOCs and NOM effect on SOC adsorption were enhanced with increasing hydrophobicity of the SWNTs.     

Adsorption of Cu(II) to schwertmannite and goethite in presence of dissolved organic matter

Sorption processes involving secondary iron minerals may significantly contribute to immobilisation of metals in soils and surface waters. In the present work the effect of dissolved organic matter (DOM) from a concentrated bog-water on the adsorption of Cu(II) onto schwertmannite (Fe₈O₈(OH)₆SO₄) and goethite (α-FeOOH) has been studied. The acid/base behaviour of DOM up to pH 6 was explained by assuming a diprotic acid with a density of carboxylate groups of 6.90 μeq (mg C)⁻¹. The resulting acidity constants, recalculated to zero ionic strength were and .The uptake of DOM to schwertmannite and goethite was highest at low pH although adsorption was significant also under mildly alkaline conditions. Adsorption to the two minerals was similar although at high pH more DOM was adsorbed to schwertmannite than to goethite.DOM enhanced the adsorption of Cu(II) at moderately low pH in the goethite system but there was no effect of DOM in the case of schwertmannite. The presence of Cu(II) resulted in a decreased adsorption of DOM to goethite at weakly acidic pH and increased adsorption at high pH. In the case of schwertmannite, Cu(II) did not affect DOM uptake.     

Development and application of functional assays for freshwater dissolved organic matter

A series of 11 standardised, reproducible, assays have been developed of physico-chemical functions of dissolved organic matter (DOM) in freshwaters. The assays provide quantitative information on light absorption, fluorescence, photochemical fading, pH buffering, copper binding, benzo(a)pyrene binding, hydrophilicity and adsorption to alumina. To obtain DOM for the assays, a 45 L sample of filtered freshwater was rotary-evaporated to reduce the volume to ca. 500 cm3. The concentrate was then passed through a strong cation exchanger, in the Na+ form, to remove alkaline-earth cations, and then through 0.7 and 0.2 microm filters. Eight samples, two each from a lake and three streamwaters, were processed. The yields of dissolved organic carbon (DOC) ranged from 70% to 107% (average 91%). The samples of DOM, stored in the dark at 4 degrees C, retained their functional assay characteristics for up to 7 months. When assaying the concentrates, parallel assays were performed with Suwannee River fulvic acid (SRFA), as a quality control standard. For most of the assays, the results for eight freshwater DOM samples are similar to those obtained with SRFA, the chief exception being the greater hydrophilicity of the DOM samples. For eight of the assays, variability among the DOM samples is significantly (p < 0.01) greater than can be explained by analytical error, i.e. by comparison with results for the SRFA quality standard; the three exceptional assays are photochemical fading, copper binding and benzo(a)pyrene binding. The two lakewater samples studied gave the most extreme assay results, probably because of the influence of phytoplankton-derived DOM. Significant correlations of hydrophilicity and adsorption with optical absorbance may mean that some DOM functional properties can be predicted from comparatively simple measurements.     

Estimation of the hydrophobic fraction of dissolved organic matter in water samples using UV photometry

In this study, we tested a simple and rapid method for the estimation of carbon in the hydrophobic fraction of dissolved organic matter (DOM) of different origin (spruce, pine, and beech litter) in soil water. The method is based on the fact that the hydrophobic fraction of DOM contains almost entirely the aromatic moieties of DOM. Thus, it showed a clearly distinct light absorption at 260 nm compared to the hydrophilic fraction. This light absorption was directly proportional to the concentration of the hydrophobic fraction. Moreover, it was independent of the concentration of the hydrophilic fraction. We compared the concentrations of hydrophobic DOM estimated by the UV method with those of the conventional fractionation using chromatographic columns of XAD-8 macroporous resin and found an excellent agreement between the two methods for both solutions from laboratory sorption experiments and field samples of forest floor leachates and subsoil porewaters. In addition, the absorption at 260 nm of hydrophobic DOM proved to be independent of pH values ranging from 2.0 to 6.5. Compared to the conventional chromatographic fractionation, the method using the UV absorption at 260 nm is less time consuming, needs a much smaller sample volume, and showed a better reproducibility. However, its use is restricted to water samples of low nitrate (<25 mg L⁻¹) and Fe (<5 mg L⁻¹) concentrations and, probably, with the hydrophobic fraction dominated by aromatic compounds deriving from degradation of lignin.     

Characterization of natural organic matter adsorption in granular activated carbon adsorbers

The removal of natural organic matter (NOM) from lake water was studied in two pilot-scale adsorbers containing granular activated carbon (GAC) with different physical properties. To study the adsorption behavior of individual NOM fractions as a function of time and adsorber depth, NOM was fractionated by size exclusion chromatography (SEC) into biopolymers, humics, building blocks, and low molecular weight (LMW) organics, and NOM fractions were quantified by both ultraviolet and organic carbon detectors. High molecular weight biopolymers were not retained in the two adsorbers. In contrast, humic substances, building blocks and LMW organics were initially well and irreversibly removed, and their effluent concentrations increased gradually in the outlet of the adsorbers until a pseudo-steady state concentration was reached. Poor removal of biopolymers was likely a result of their comparatively large size that prevented access to the internal pore structure of the GACs. In both GAC adsorbers, adsorbability of the remaining NOM fractions, compared on the basis of partition coefficients, increased with decreasing molecular size, suggesting that increasingly larger portions of the internal GAC surface area could be accessed as the size of NOM decreased. Overall DOC uptake at pseudo-steady state differed between the two tested GACs (18.9 and 28.6 g-C/kg GAC), and the percent difference in DOC uptake closely matched the percent difference in the volume of pores with widths in the 1-50 nm range that was measured for the two fresh GACs. Despite the differences in NOM uptake capacity, individual NOM fractions were removed in similar proportions by the two GACs.     

Effects of activated carbon characteristics on the simultaneous adsorption of aqueous organic micropollutants and natural organic matter

The overall objective of this research was to determine the effects of physical and chemical activated carbon characteristics on the simultaneous adsorption of trace organic contaminants and natural organic matter (NOM). A matrix of 12 activated carbon fibers (ACFs) with three activation levels and four surface chemistry levels (acid-washed, oxidized, hydrogen-treated, and ammonia-treated) was studied to systematically evaluate pore structure and surface chemistry phenomena. Also, three commercially available granular activated carbons (GACs) were tested. The relatively hydrophilic fuel additive methyl tertiary-butyl ether (MTBE) and the relatively hydrophobic solvent trichloroethene (TCE) served as micropollutant probes. A comparison of adsorption isotherm data collected in the presence and absence of NOM showed that percent reductions of single-solute TCE and MTBE adsorption capacities that resulted from the presence of co-adsorbing NOM were not strongly affected by the chemical characteristics of activated carbons. However, hydrophobic carbons were more effective adsorbents for both TCE and MTBE than hydrophilic carbons because enhanced water adsorption on the latter interfered with the adsorption of micropollutants from solutions containing NOM. With respect to pore structure, activated carbons should exhibit a large volume of micropores with widths that are about 1.5 times the kinetic diameter of the target adsorbate. Furthermore, an effective adsorbent should possess a micropore size distribution that extends to widths that are approximately twice the kinetic diameter of the target adsorbate to prevent pore blockage/constriction as a result of NOM adsorption.     

Atrazine removal from water by polycation-clay composites: Effect of dissolved organic matter and comparison to activated carbon

Atrazine removal from water by two polycations pre-adsorbed on montmorillonite was studied. Batch experiments demonstrated that the most suitable composite poly (4-vinylpyridine-co-styrene)-montmorillonite (PVP-co-S90%-mont.) removed 90-99% of atrazine (0.5-28 ppm) within 20-40 min at 0.367% w/w. Calculations employing Langmuir's equation could simulate and predict the kinetics and final extents of atrazine adsorption. Column filter experiments (columns 20 × 1.6 cm) which included 2 g of the PVP-co-S90%-mont. composite mixed with excess sand removed 93-96% of atrazine (800 ppb) for the first 800 pore volumes, whereas the same amount of granular activated carbon (GAC) removed 83-75%. In the presence of dissolved organic matter (DOM; 3.7 ppm) the efficiency of the GAC filter to remove atrazine decreased significantly (68-52% removal), whereas the corresponding efficiency of the PVP-co-S90%-mont. filter was only slightly influenced by DOM. At lower atrazine concentration (7 ppb) the PVP-co-S90%-mont. filter reduced even after 3000 pore volumes the emerging atrazine concentration below 3 ppb (USEPA standard). In the case of the GAC filter the emerging atrazine concentration was between 2.4 and 5.3 μg/L even for the first 100 pore volumes. Thus, the PVP-co-S90%-mont. composite is a new efficient material for the removal of atrazine from water.     

Photo-dissolution of flocculent, detrital material in aquatic environments: contributions to the dissolved organic matter pool

This study shows that light exposure of flocculent material (floc) from the Florida Coastal Everglades (FCE) results in significant dissolved organic matter (DOM) generation through photo-dissolution processes. Floc was collected at two sites along the Shark River Slough (SRS) and irradiated with artificial sunlight. The DOM generated was characterized using elemental analysis and excitation emission matrix fluorescence coupled with parallel factor analysis. To investigate the seasonal variations of DOM photo-generation from floc, this experiment was performed in typical dry (April) and wet (October) seasons for the FCE. Our results show that the dissolved organic carbon (DOC) for samples incubated under dark conditions displayed a relatively small increase, suggesting that microbial processes and/or leaching might be minor processes in comparison to photo-dissolution for the generation of DOM from floc. On the other hand, DOC increased substantially (as much as 259 mgC gC⁻¹) for samples exposed to artificial sunlight, indicating the release of DOM through photo-induced alterations of floc. The fluorescence intensity of both humic-like and protein-like components also increased with light exposure. Terrestrial humic-like components were found to be the main contributors (up to 70%) to the chromophoric DOM (CDOM) pool, while protein-like components comprised a relatively small percentage (up to 16%) of the total CDOM. Simultaneously to the generation of DOC, both total dissolved nitrogen and soluble reactive phosphorus also increased substantially during the photo-incubation period. Thus, the photo-dissolution of floc can be an important source of DOM to the FCE environment, with the potential to influence nutrient dynamics in this system.     

Spectrofluorometric properties of dissolved organic matter from Central and Southern Ontario streams and the influence of iron and irradiation

Fluorescence measurements were used to compare characteristics of dissolved organic matter (DOM) from distinctly different origins: boreal, agricultural and urban streams as well as a storm runoff pond and the outlet of a tertiary wastewater treatment plant. The primary goal was to determine if differences among stream types could be detected using DOM fluorescence in lieu of isolated fulvic acids (FA). Differences in peak excitation and peak emission wavelengths, fluorescence integrated over the 3-D matrix volume integrated fluorescence (VIF), and in a fluorescence index (FI) were examined. In general, peak fluorescence excitation and emission wavelengths as well as FI best distinguished DOM from the various origins. Results suggested that DOM from the boreal streams was of a higher molecular weight and more complex than that of agricultural and urban streams. The effects of irradiation as well as Fe on fluorescence of natural stream waters were also investigated, both of which decreased the ability of optical properties to distinguish DOM source.     

Reconsidering the quantitative analysis of organic carbon concentrations in size exclusion chromatography

The evaluation of the molecular size distribution of natural organic matter (NOM) in aquatic environments via size exclusion chromatography (SEC) is important for the understanding of environmental processes such as nutrient cycling and pollutant transport as well as of technical water treatment processes. The use of organic carbon (OC) detectors has become popular in recent studies due to improved availability and quantification possibilities, which supposedly are superior to those of ultraviolet (UV) detectors. A set of 12 NOM samples was used to demonstrate the limitations of online OC detection (OCD) when analyzing complex aquatic organic matter. A novel evaluation approach for SEC data is introduced by combining the information from UV absorbance (UVA) and OCD chromatograms as well as offline total OC (t-OC) and dissolved OC-specific UVA (SUVA) measurements. It could be shown that about 70% of certain OC components were not detected with the OCD system used in this study. For the investigated samples, these types of carbon accounted for up to 72% of the t-OC, i.e. for such NOM samples quantification by OCD is not possible or at least highly questionable. The addition of an oxidant improved the overall oxidation efficiency only slightly. Most likely NOM that predominantly consists of polysaccharides and features a nominal molecular weight of 150 kg/mol or more was responsible for low OCD yields. For future applications, a further improvement of the OCD system would be worthwhile so that quantitative analytical data on the molecular size distribution of NOM and its structural characteristics such as the SUVA distribution can be obtained.     

Effects of mass retention of dissolved organic matter and membrane pore size on membrane fouling and flux decline

Ultrafiltration (UF) fouling has been attributed to concentration polarization, gel layer formation as well as outer and inner membrane pore clogging. It is believed that mass of humic materials either retained on membrane surface or associated with membrane inner pore surface is the primary cause for permeate flux decline and filtration resistance build-up in water supply industries. While biofilm/biofouling and inorganic matter could also be contributing factors for permeability decline in wastewater treatment practices. The present study relates UF fouling to mass of dissolved organic matter (DOM) retained on membrane and quantifies the effect of retained DOM mass on filtration flux decline. The results demonstrate that larger pore membranes exhibit significant flux decline in comparison with the smaller ones. During a 24-h period, dissolved organic carbon mass retained in 10 kDa membranes was about 1.0 g m⁻² and that in 100 kDa membranes was more than 3 times higher (3.6 g m⁻²). The accumulation of retained DOM mass significantly affects permeate flux. It is highly likely that some DOMs bind or aggregate together to form surface gel layer in the smaller 10 kDa UF system; those DOMs largely present in inner pore and serving as pore blockage on a loose membrane (100 kDa) are responsible for severe flux decline.     

Sorption of phenols onto sandy aquifer material: the effect of dissolved organic matter (DOM)

The influence of dissolved organic matter (DOM) on the sorption of four phenols, 2,4,6-trichlorophenol (2,4,6-TCP), pentachlorophenol (PCP), 2,4-dinitrophenol (2,4-DNP) and 2-methyl-4,6-dinitrophenol (2-M-4,6-DNP), onto sandy aquifer material at different pH values was investigated using flow through column experiments. The pH-dependent sorption of the chlorinated phenols 2,4,6-TCP and PCP was not significantly affected by DOM (measured as dissolved organic carbon, DOC), whereas in the case of nitrophenols a significant lower retardation was found, depending on the DOC concentration and pH value of the aqueous solution. Sorption decreases with increasing DOC concentration, which indicates a binding of these compounds by DOM. The degree of sorption reduction depends on the pH value and increases with increasing fraction of neutral species. The different behaviour of nitrophenols in comparison to the chlorophenols is assumed to be a result of specific charge-transfer interactions. A combined sorption and complex formation model was used to describe the effect of pH and DOC concentration on the sorption of nitrophenols onto aquifer material and to estimate binding coefficients of neutral nitrophenols on DOM.     

Influence of dissolved organic matter on estrone removal by NF membranes and the role of their structures

The influence of different dissolved organic matter (DOM) on the removal of steroid hormone estrone during nanofiltration (NF) processes was investigated. Commercial dextran and humic acid (HA) as well as hydrophobic acid fraction (HpoA) derived from treated effluent were selected as DOM. To better understand the mechanism by which they affect estrone transport across NF membrane, the structural characteristics of DOM were also examined. The experimental results showed that DOM studied displayed obviously diverse impacts on estrone removal by NF membranes. These impacts were found to correlate with the structural characteristics of DOM. The presence of dextran without aromatic ring had little effects on the fate and transport of estrone during NF processes. The addition of HA without phenolic groups but great aromaticity improved estrone adsorption on membrane significantly while the “enhancement effect” on estrone rejection was limited. Moreover, estrone rejection by NF membranes was obviously increased by the presence of HpoA which possesses both phenolic groups and aromaticity. Some of the findings reported may be critically important for understanding the removal mechanism of estrone by NF membrane in real water matrix where various DOM co-present.     

Dissolved organic matter, aluminium and iron interactions: precipitation induced by metal/carbon ratio, pH and competition

To better understand the precipitation behaviour of dissolved organic matter induced by interactions with metals, a systematic titration experiment was conducted mimicking the soil solution conditions in an acidic, sandy soil. The variables of interest included the type of metal species (Al, Fe), the redox state [Fe(II), Fe(III)], the pH (3.5, 4.0, 4.5), the metal to organic carbon (M/C) ratio and the competition between Al and Fe. Precipitation of DOM–Al appeared to be strongly correlated with M/C ratio and the pH. For Fe(II) only little precipitation occurred, while the strongest flocculation degree was found after addition of Fe(III). In contrast to Al, hardly any correlation between DOM–Fe precipitation and pH was observed. Both reduction and oxidation of Fe was found and exhibited a strong effect on the precipitated amounts of DOM and Fe. In competition, Al determined the precipitation behaviour at lower M/C ratios (<0.10), while at higher M/C ratios Fe determined the flocculation. Below a M/C ratio of 0.06 Al was the dominant metal in the precipitates, especially at lower pH levels, while the opposite trend was found at M/C ratios above 0.06. Overall, Fe(III) gave the strongest flocculation, although Al influenced the impact of Fe(III) interactions with DOM in relation to pH and M/C ratio.     

Behavior and characteristics of dissolved organic matter during column studies of soil aquifer treatment

Soil column experiments were performed to investigate the behavior and characteristics of dissolved organic matter (DOM) during soil aquifer treatment (SAT), and to differentiate among the mechanisms responsible for the changes in the structural and functional properties of DOM during SAT. To determine the biological transformation of DOM, biodegradability tests using a biodegradation-column system were conducted. DOM was fractionated using XAD resins into 5 fractions: hydrophobic acid (HPO-A), hydrophobic neutral (HPO-N), transphilic acid (TPI-A), transphilic neutral (TPI-N) and hydrophilic fraction (HPI). Dissolved organic carbon (DOC) was removed by 70% during SAT, and the sorption and anaerobic biodegradation in SAT led to a DOC reduction of 27.4%. The significant changes in fluorescence properties of DOM were observed during SAT. However, the sorption and anaerobic biodegradation in SAT seemed to have no significant effect on the chemical structure of fluorescing constituents in DOM. The DOM fractions exhibited different changes in Fourier-transform infrared (FT-IR) spectra characteristics during SAT. Biodegradation resulted in the enrichment of aromatic structures and the decreased content of the oxygen-containing functional groups, such as CO and C-O, in DOM. On the other hand, the production of C-O and amide-2 functional groups occurred as a result of the sorption combined with anaerobic biodegradation in SAT.     

UV-induced photochemical heterogeneity of dissolved and attached organic matter associated with cyanobacterial blooms in a eutrophic freshwater lake

Cyanobacterial blooms represent a significant ecological and human health problem worldwide. In aquatic environments, cyanobacterial blooms are actually surrounded by dissolved organic matter (DOM) and attached organic matter (AOM) that bind with algal cells. In this study, DOM and AOM fractionated from blooming cyanobacteria in a eutrophic freshwater lake (Lake Taihu, China) were irradiated with a polychromatic UV lamp, and the photochemical heterogeneity was investigated using fluorescence excitation–emission matrix (EEM)-parallel factor (PARAFAC) analysis and synchronous fluorescence (SF)-two dimensional correlation spectroscopy (2DCOS). It was shown that a 6-day UV irradiation caused more pronounced mineralization for DOM than AOM (59.7% vs. 41.9%). The EEM-PARAFAC analysis identified one tyrosine-, one humic-, and two tryptophan-like components in both DOM and AOM, and high component photodegradation rates were observed for DOM versus AOM (k > 0.554 vs. <0.519). Moreover, SF-2DCOS found that the photodegradation of organic matters followed the sequence of tyrosine-like > humic-like > tryptophan-like substances. Humic-like substances promoted the indirect photochemical reactions, and were responsible for the higher photochemical rate for DOM. The lower photodegradation of AOM benefited the integrality of cells in cyanobacterial blooms against the negative impact of UV irradiation. Therefore, the photochemical behavior of organic matter was related to the adaptation of enhanced-duration cyanobacterial blooms in aquatic environments.     

Partitioning of dissolved organic matter-bound mercury between a hydrophobic surface and polysulfide-rubber polymer

This study investigated the role of dissolved organic matter on mercury partitioning between a hydrophobic surface (polyethylene, PE) and a reduced sulfur-rich surface (polysulfide rubber, PSR). Comparative sorption studies employed polyethylene and polyethylene coated with PSR for reactions with DOM-bound mercuric ions. These studies revealed that PSR enhanced the Hg-DOM removal from water when DOM was Suwannee River natural organic matter (NOM), fulvic acid (FA), or humic acid (HA), while the same amount of 1,3-propanedithiol-bound mercuric ion was removed by both PE and PSR-PE. The differences for Hg-DOM removal efficiencies between PE and PSR-PE varied depending on which DOM was bound to mercuric ion as suggested by the PE/water and PSR-PE/water partition coefficients for mercury. The surface concentrations of mercury on PE and PSR-PE with the same DOM measured by x-ray photoelectron spectroscopy were similar, which indicated the comparable amounts of immobilized mercury on PE and PSR-PE being exposed to the aqueous phase. With these observations, two major pathways for the immobilization reactions between PSR-PE and Hg-DOM were examined: 1) adsorption of Hg-DOM on PE by hydrophobic interactions between DOM and PE, and 2) addition reaction of Hg-DOM onto PSR by a complexation reaction between Hg and PSR. The percent contribution of each pathway was derived from a mass balance and the ratios among aqueous mercury, PE-bound Hg-DOM, and PSR-bound Hg-DOM concentrations. The results indicate strong binding of mercuric ion with both dissolved organic matter and PSR polymer. The FT-IR examination of Hg-preloaded-PSR-PEs after the reaction with DOM corroborated a strong interaction between mercuric ion and 1,3-propanedithiol compared to Hg-HA, Hg-FA, or Hg-NOM interactions.