Characteristics of competitive adsorption between 2-methylisoborneol and natural organic matter on superfine and conventionally sized powdered activated carbons

When treating water with activated carbon, natural organic matter (NOM) is not only a target for adsorptive removal but also an inhibitory substance that reduces the removal efficiency of trace compounds, such as 2-methylisoborneol (MIB), through adsorption competition. Recently, superfine (submicron-sized) activated carbon (SPAC) was developed by wet-milling commercially available powdered activated carbon (PAC) to a smaller particle size. It was reported that SPAC has a larger NOM adsorption capacity than PAC because NOM mainly adsorbs close to the external adsorbent particle surface (shell adsorption mechanism). Thus, SPAC with its larger specific external surface area can adsorb more NOM than PAC. The effect of higher NOM uptake on the adsorptive removal of MIB has, however, not been investigated. Results of this study show that adsorption competition between NOM and MIB did not increase when NOM uptake increased due to carbon size reduction; i.e., the increased NOM uptake by SPAC did not result in a decrease in MIB adsorption capacity beyond that obtained as a result of NOM adsorption by PAC. A simple estimation method for determining the adsorbed amount of competing NOM (NOM that reduces MIB adsorption) is presented based on the simplified equivalent background compound (EBC) method. Furthermore, the mechanism of adsorption competition is discussed based on results obtained with the simplified EBC method and the shell adsorption mechanism. Competing NOM, which likely comprises a small portion of NOM, adsorbs in internal pores of activated carbon particles as MIB does, thereby reducing the MIB adsorption capacity to a similar extent regardless of adsorbent particle size. SPAC application can be advantageous because enhanced NOM removal does not translate into less effective removal of MIB. Molecular size distribution data of NOM suggest that the competing NOM has a molecular weight similar to that of the target compound.     

纳米SiO_2用于含表面活性剂原水的处理

在含表面活性剂十二烷基硫酸钠(SDS)的低浊(6 NTU)高岭土原水中,投加纳米SiO_2进行动态混凝与静沉试验,借助图像分析技术与定量控制参数,探讨了纳米SiO_2的作用效果与形态学特性.结果表明:絮体的形成与生长具有分形特征,分形结构是影响颗粒混凝、絮团密实度与沉降特性的主要因素;SDS的存在对絮凝初期絮体的形成起阻碍作用,随后SDS与混凝剂的混合体共同对粒子作用,促进絮凝,絮体变大且密实,沉降性能改善;SDS和SiO_2对高岭土粒子存在竞争吸附;单独投加纳米SiO_2时形成的絮体小而脆弱,而以纳米SiO_2为助凝剂能促使PAC絮体结构向更密实的构型转变,对浊度和SDS的去除率提高.     

The effect of ozonation on natural organic matter removal by alum coagulation

Natural organic matter (NOM) was extracted from a moderately colored, eutrophic surface water source (Forge Pond, Granby, MA), and fractionated into quasi-homogeneous fractions. Fulvic acid (FA) and hydrophilic neutrals (HN) were the two most abundant NOM fractions that were isolated. Adsorption affinity of the isolated NOM fractions on preformed aluminum hydroxide flocs increased with increase in specific organic charge of the fractions, except for the two most highly charged fractions, FA and hydrophilic acids (HAA), which showed less adsorption affinity than expected based on their specific organic charge. Prior ozonation of FA and HN fractions resulted in a decline and an increase, respectively, in their adsorption affinity on aluminum hydroxide surface. Prior ozonation of Forge Pond raw water resulted in a progressive decline in dissolved organic carbon (DOC) removal by alum coagulation with increase in ozone dose. It appeared that ozone applied to raw water reacted preferentially with the humic fraction of NOM, resulting in the detrimental effects of ozonation on subsequent NOM removal by alum coagulation being magnified. Forge Pond raw water was pre-coagulated to remove humic substances. Ozonation of the pre-coagulated water demonstrated the beneficial effects of ozonation on the removal of non-humic NOM through alum coagulation. A strategy for staged coagulation with intermediate ozonation was proposed for waters containing both humic and non-humic NOM for maximum DOC and specific UV absorbance at 254nm (SUVA) removal.     

Comparison of natural organic matter adsorption capacities of super-powdered activated carbon and powdered activated Carbon

We examined the natural organic matter (NOM) adsorption characteristics of super-powdered activated carbon (S-PAC) produced by pulverizing commercially available, normal PAC to a submicron particle size range. The adsorption capacities of S-PAC for NOM and polystyrene sulfonates (PSS) with molecular weights (MWs) of 1.1, 1.8, and 4.6 kDa, which we used as model compounds, were considerably higher than those of PAC. The adsorption capacity increases were observed for all five types of carbon tested (two wood-based, two coconut-based, and one coal-based carbon). The adsorption capacities of S-PAC and PAC for polyethylene glycols (PEGs) with MWs of 0.3 and 1.0 were the same. The adsorption capacities of S-PAC for PEGs with MWs of 3.0 and 8.0 kDa were slightly higher than the adsorption capacities of PAC, but the difference in adsorption capacity was not as large as that observed for NOM and the PSSs, even though the MW ranges of the adsorbates were similar. We concluded that the adsorption capacity differences between S-PAC and PAC observed for NOM and PSSs were due to the difference in particle size between the two carbons, rather than to differences in internal pore size or structure, to differences in activation, or to non-attainment of equilibrium that resulted from the change in particle size. The difference in adsorption capacity between S-PAC and PAC was larger for NOM with a high specific UV absorbance (SUVA) value than for low-SUVA NOM. The larger adsorption capacities of S-PAC compared with PAC were explained by the larger specific external surface area per unit mass. We hypothesize that a larger fraction of the internal pore volume is accessible with carbon of smaller particle size because the NOM and PSS molecules preferentially adsorb near the outer surface of the particle and therefore do not completely penetrate the adsorbent particle.     

Effects of pre-ozonation on the removal of THM precursors by coagulation

Pre-ozonation in combination with enhanced coagulation was used to remove NOM from lake water as to control the formation of disinfection by-products, DBPs. The effect of the hydrophobicity/hydrophilicity nature of NOM on the performance of the combined pre-ozonation and coagulation process was studied. The hydrophilicity/hydrophobicity property of NOM was characterized in terms of mass distribution of the phydrophilic and the hydrophobilic fractions of NOM. The optimal condition for the combined pre-ozonation-coagulation was established: pH = ca. 9.0 and ozone dose = 0.45 mg-O₃/mg-DOC. Under the optimal condition, it was able to achieve ∼ 60% of THMFP removal. In terms of THMPF, results also indicated that the distribution between the hydrophilic and the hydrophobic fractions of NOM was 57.3 and 98.7 µg-THMFP/mg-DOC, respectively. Ozonation alters the structures and characteristics of NOM thereby affecting the coagulation effectiveness. Pre-ozonation was effective in removing the hydrophobic NOM, with a decrease of THMFP by ∼ 20% versus ∼ 10% for the hydrophilic fraction. The dosage of coagulant also governed DOC removal. The removal of hydrophobic and hydrophilic NOM were in the range of 27-41 and 2.5-22.7%, respectively at alum dosage of 0.41-1.65 (in Al/DOC) and 0.41-1.65 (in Al/DOC) and ozone dose of 0.58-2.93, mg/mg respectively. The adsorption characteristics of the hydrophilic and the hydrophobic fractions of NOM on aluminum hydroxide (from coagulant alum) were studied. Results indicated that the modified Langmuir isotherm of competitive adsorption was able to describe the adsorption of NOM onto hydrous aluminum hydroxide formed during alum coagulation of the lake waters.     

受典型除草剂污染原水的应急处理工艺研究

以水中阿特拉津和莠灭净浓度突增为背景,研究了混凝、PAC吸附和PAC吸附＋混凝等工艺对它们的去除效率,同时根据原水水质的变化和水厂的常用工艺,分别考察了混凝剂投加量、pH值、预氧化对混凝去除阿特拉津和莠灭净的影响,以及目标物初始浓度、天然有机物浓度和预氧化对PAC吸附的影响。结果表明,调节pH值及采取预氧化措施均能改善混凝对阿特拉津和莠灭净的去除效果,但其出水浓度仍不能达标;天然有机物浓度对PAC吸附的影响并非是简单的线性关系,同时投加氧化剂和PAC会相互削弱其作用,PAC吸附＋混凝才是去除阿特拉津和莠灭净最简单、有效的方法。     

Mechanism of natural organic matter removal by polyaluminum chloride: effect of coagulant particle size and hydrolysis kinetics

The mechanism of natural organic matter (NOM) removal by AlCl(3) and polyaluminum chloride (PACl) was investigated through bench-scale tests. The fraction distributions of NOM and residual Al after coagulation in solution, colloid and sediment were analyzed as changes of coagulant dosage and pH. The influence of NOM, coagulant dose and pH on coagulation kinetics of AlCl(3) was investigated using photometric dispersion analyzer compared with PACl. Monomeric Al species (Al(a)) shows high ability to satisfy some unsaturated coordinate bonds of NOM to facilitate particle and NOM removal, while most of the flocs formed by Al(a) are small and difficult to settle. Medium polymerized Al species (Al(b)) can destabilize particle and NOM efficiently, while some flocs formed by Al(b) are not large and not easy to precipitate as compared to those formed by colloidal or solid Al species (Al(c)). Thus, Al(c) could adsorb and remove NOM efficiently. The removal of contaminant by species of Al(a), Al(b) and Al(c) follows mechanisms of complexation, neutralization and adsorption, respectively. Unlike preformed Al(b) in PACl, in-situ-formed Al(b) can remove NOM and particle more efficiently via the mechanism of further hydrolysis and transfer into Al(c) during coagulation. While the presence of NOM would reduce Al(b) formed in-situ due to the complexation of NOM and Al(a).     

Removal of THM precursors by coagulation or ion exchange

The removal of natural organic matter (NOM) from drinking water supplies can be achieved by different processes, among them coagulation and adsorption. Synthetic waters made from concentrates of humic substances from reservoir and river waters were tested in the laboratory for ease of removal of NOM by coagulation with cationic organic polymers and with alum, and by adsorption on anion exchangers. For polymers such as high molecular weight polydiallyldimethylammonium chloride (polyDADMAC) and cationic polyacrylamides of high charge, performance was nearly as effective as alum, with colour removals 86–100% of those obtained for alum. Ion exchange using the best commercially available resins designed for this purpose, a gel polystyrene and a macroporous acrylic resin, was more effective than alum treatment for two of the natural waters studied, but inferior for a third. The resins were overall superior to cationic polymers.

The NOM was separated into four fractions based on hydrophobic and hydrophilic properties. Alum was not as effective as ion exchange for the elimination of individual ionic NOM fractions. It was better than cationic polymers for removal of humic and fulvic acids, although polyDADMAC was as good for one water. For the removal of charged compounds alum then polyDADMAC were the best performers for that water. Unequivocal evidence was obtained that coagulants remove material that is not adsorbed by resins, and vice versa. A combination of coagulation with a cationic polymer and adsorption by an anion exchanger removed essentially all of the NOM. The preference of the coagulants was for the larger, more hydrophobic molecules, and of resins for smaller highly charged hydrophilic molecules. Each fraction had trihalomethane formation potentials in the range 11–24 μg/mg, except for one water that was more reactive. Hence, the actual amount of each fraction in the original water becomes a crucial factor.     

Breakage and re-growth of flocs formed by charge neutralization using alum and polyDADMAC

The formation, breakage and re-growth of flocs were investigated using alum and polyDADMAC to explore the reversibility of floc breakage. There is a significant reversibility of the breakage process, i.e. the broken flocs can re-grow to the size before breakage, when charge neutralization dominates the coagulation mechanism. However, for higher alum dosage, the break-up process displayed a distinct irreversibility. When coagulated in charge neutralization, the re-growth process of alum was nearly the same as that of polyDADMAC. The average size, coagulation rate and fractal dimension of flocs before and after breakage were nearly the same, including alum and polyDADMAC. While at higher alum dosage, the average size, coagulation rate and fractal dimension of flocs after breakage were much lower than that before breakage. Most important is that the number of small flocs after breakage and re-growth was much less than before breakage when charge neutralization dominated the coagulation mechanism. On the contrary, at higher alum dosage, the small flocs, after breakage and re-growth, increased. The fractal dimension of flocs with alum increased as coagulation time increased until a limiting floc size was reached, while for higher alum dosage, it decreased, whether before or after breakage. The determining parameter for floc re-growth is probably not the fractal dimension, but rather the chemical characteristics of the flocs surface.     

Elucidating competitive adsorption mechanisms of atrazine and NOM using model compounds

Based on the relative adsorbability of natural organic matter (NOM) fractions with different molecular weights (MWs), two model compounds, poly(styrene sulfonate) (PSS) (nominal MW=1800 Dalton) and p-dichlorobenzene (DCB), were chosen to study the competitive effect of large and small NOM molecules on atrazine adsorption by two powdered activated carbons (PACs) with different pore size distributions. Both isotherm and kinetic tests of atrazine adsorption were conducted using fresh PAC and PAC preloaded with the model compounds. The model compounds were found to affect atrazine adsorption through two different mechanisms due to their size difference: direct competition for sites by p-DCB and pore constriction/blockage by PSS-1.8k. p-DCB was found to significantly reduce atrazine adsorption capacity but to have no effect on atrazine adsorption kinetics. In contrast, the effect of PSS-1.8k on atrazine adsorption capacity was very small. Furthermore, during simultaneous adsorption, PSS-1.8k had no effect on atrazine surface diffusion. However, preloading PAC with PSS-1.8k lowered the atrazine surface diffusion coefficient, D(s), by more than three orders of magnitude; D(s) decreased with increasing solid phase PSS-1.8k concentration. The pore size distribution of the PAC was found to play an important role in competitive adsorption. A high mesopore surface area could alleviate pore blockage significantly.     

Effect of two-stage coagulant addition on coagulation-ultrafiltration process for treatment of humic-rich water

A novel two-stage coagulant addition strategy applied in a coagulation-ultrafiltration (UF) process for treatment of humic-rich water at neutral pH was investigated in this study. When aluminum sulfate (alum) doses were set at a ratio of 3:1 added during rapid mix stage and half way through flocculation stage, the integrated process of two-stage alum addition achieved almost the same organic matter removal as that of conventional one-stage alum addition at the same overall dose. Whereas membrane fouling could be effectively mitigated by the two-stage addition exhibited by trans-membrane pressure (TMP) developments. The TMP developments were found to be primarily attributed to external fouling on membrane surface, which was closely associated with floc characteristics. The results of jar tests indicated that the average size of flocs formed in two-stage addition mode roughly reached one half larger than that in one-stage addition mode, which implied a beneficial effect on membrane fouling reduction. Moreover, the flocs with more irregular structure and lower effective density resulted from the two-stage alum addition, which caused higher porosity of cake layer formed by such flocs on membrane surface. Microscopic observations of membrane surface demonstrated that internal fouling in membrane pores could be also remarkably limited by two-stage alum addition. It is likely that the freshly formed hydroxide precipitates were distinct in surface characteristics from the aged precipitates due to formation of more active groups or adsorption of more labile aluminum species. Consequently, the flocs could further connect and aggregate to contribute to preferable properties for filtration performance of the coagulation-UF process. As a simple and efficient approach, two-stage coagulant addition strategy could have great practical significance in coagulation-membrane processes.     

Effects of humic acid on physical and hydrodynamic properties of kaolin flocs by particle image velocimetry

The physical and hydrodynamic properties of kaolin flocs including floc size, strength, regrowth, fractal structure and settling velocity were investigated by in situ particle image velocimetry technique at different humic acid concentration. Jar-test experimental results showed that the adsorbed humic acid had a significant influence on the coagulation process for alum and ferric chloride. Kaolin flocs formed with the ferric chloride were larger and stronger than those for alum at same humic acid concentration. Floc strength and regrowth were estimated by strength factor and recovery factor at different humic acid concentration. It was found that the increased humic acid concentration had a slight influence on the strength of kaolin flocs and resulted in much worse floc regrowth. In addition, the floc regrowth after breakage depended on the shear history and coagulants under investigation. The changes in fractal structure recorded continuously by in situ particle image velocimetry technique during the growth-breakage-regrowth processes provided a supporting information that the kaolin flocs exhibited a multilevel structure. It was proved that the increased humic acid concentration resulted in decrease in mass fractal dimension of kaolin flocs and consequently worse sedimentation performance through free-settling and microbalance techniques.     

Effects of chemical amendments on aquatic floc structure, settling and strength

Using a shear-cell/flow-cell combination integrated with an inverted microscope, the behaviour of Hamilton Harbour sediments was studied mixed with three different amendments: alum, chitosan (both coagulants) and a polyacrylamide (a flocculant). Samples from the shear cell were drawn into the flow cell, where floc structure and size were assessed throughout the floc formation and breakage stages using computer image analysis. Settling velocity, density and porosity were also assessed, with results suggesting that amendment addition may be an effective method for the management of high-turbidity environments, provided there are no toxicological effects. In an assessment of performance, it was found that the polyacrylamide flocculant showed the greatest promise in reducing turbidity levels as it produced the largest flocs with the highest settling velocity. Although more prone to break-up, these flocs still remained larger than those formed with alum or chitosan at the same shear. All flocs, regardless of amendment, broke up due to a fracture mechanism rather than by microscale erosion. By improving our understanding of how these amendments may influence floc properties and behaviours, more effective management tools may be developed for the remediation and control of high-turbidity aquatic environments.     

Influence of the character of NOM on the ozonation of MIB and geosmin

Tastes and odours (T&Os) are a major concern in drinking water as they are not efficiently removed by conventional water treatment. Ozonation has been effective for their destruction in some studies. However, the natural organic matter (NOM) in waters can affect the ozonation process and subsequently affect the destruction of T&Os. Five NOM fractions were isolated and ozonated in synthetic waters. The fraction containing the more highly coloured, higher molecular weight compounds exhibited the highest ozone (O3) demand, whereas the low aromatic fraction exhibited the lowest O3 demand. The character of the NOM fractions influenced the ozonation of MIB and geosmin. The destruction of MIB and geosmin was significantly higher in the fraction with the highest colour and UV/visible absorbance at all O3 doses. The destruction of the compounds in the other fractions showed the same trends, increasing MIB and geosmin destruction with increasing UV/visible absorbing character of the NOM. MIB was also ozonated in two real waters. with results showing a competing effect between NOM concentration and NOM character. The O3 reaction time was shown to be important for the destruction of both compounds.     

Pore blockage effect of NOM on atrazine adsorption kinetics of PAC: the roles of PAC pore size distribution and NOM molecular weight

Natural organic matter (NOM) in natural water has been found to have negative effects on the adsorption of various trace organic compounds by activated carbon through two major mechanisms: direct competition for sites and pore blockage. In this study, the pore blockage effect of NOM on atrazine adsorption kinetics was investigated. Two types of powdered activated carbon (PAC) and three natural waters were tested to determine the roles of PAC pore size distribution and NOM molecular weight distribution in the pore blockage mechanism. When PAC was preloaded with natural water, the pore blockage effect of the NOM was found to cause a reduction of up to more than two orders of magnitude in the surface diffusion rate of atrazine compared to simultaneous adsorption of atrazine and NOM with fresh PAC. The surface diffusion coefficient of atrazine for preloaded PAC decreased with a decrease in PAC dose or an increase in NOM surface concentration. Because of the pore blockage effect of NOM, a 30% drop in atrazine removal was observed in a continuous flow PAC/microfiltration (MF) system after 7 days of contact compared to the removal predicted from the batch isotherm test. Large micropores and mesopores were found to play an important role in alleviating the effect of pore blockage. A PAC with a relatively large fraction of large micropore and mesopores was shown to suffer much less from the pore blockage effect compared with a PAC that had a much smaller fraction of large pores. Natural waters with different NOM molecular weight distribution caused different extent of pore blockage. The NOM molecules with molecular weight between 200 and 700 Dalton appeared to be responsible for the pore blockage effect.     

The application of powdered activated carbon for MIB and geosmin removal: predicting PAC doses in four raw waters

Blooms of blue-green algae in reservoirs often produce the musty-earthy taste and odour algal metabolites 2-methylisoborneol (MIB) and geosmin. MIB and geosmin are not removed by conventional water treatment and their presence in the distribution system, even at low ng L-1 levels, can result in consumer complaints. Powdered activated carbon (PAC) can effectively remove MIB and geosmin when the correct dose is applied. The homogeneous surface diffusion model (HSDM) was used to predict PAC doses required to reduce MIB and geosmin concentrations to below 10 ng L-1 at four water treatment plants in Adelaide, South Australia. In jar tests, undertaken under treatment plant conditions, the predicted doses were found to produce water of the desired quality in three of the four waters. The poor predictions found in the fourth water, which had a considerably higher turbidity, were attributed to the incorporation of PAC in a larger, denser floc, leading to a reduced effective contact time of the adsorbent. It was found that higher doses of PAC were required for both compounds to produce acceptable quality water when turbidities rose above 26 NTU.     

Coagulation dynamics of fractal flocs induced by enmeshment and electrostatic patch mechanisms

The size and structure of flocs during floc formation were monitored for various coagulation mechanisms. Two distinctive mechanisms, namely, enmeshment and electrostatic patch, govern the dynamics of kaolin particles coagulation by polyaluminum chloride (PACl). They were investigated by small angle static light scattering (SASLS) and solid-state ²⁷Al NMR. In addition, a novel wet SEM (WSEM) was used in-situ to image the morphology of the aggregate in aqueous solution. Synthetic suspended particles were coagulated by two PACl products, a commercial product (PACl) and one laboratory product (PACl-E). The PACl-E contained more than 60% Al₁₃ while the PACl contained only 7% Al₁₃, with large percentage of colloidal Al. For coagulation by PACl at neutral pH and high dosage where the strong repulsion between particles occurs, the enmeshment ruled by reaction-limited aggregation (RLA) results in larger sweep flocs as well as higher fractal dimensional structure. For coagulation by PACl-E at alkaline pH and low dosage, the flocs were coagulated predominately by electrostatic patch with Al₁₃ aggregates. At such condition, it is likely that diffusion-limited aggregation (DLA) predominately rule PACl-E coagulation. The fractal dimension (D_s) values of PACl and PACl-E flocs formed at enmeshment and electrostatic patch increased with dosage, respectively. When breakage of flocs occurs, the breakage rate of PACl-E flocs is slower than that of sweep flocs. By WSEM imaging, the adsorption of spherical Al precipitates onto the particles was observed to form sweep flocs with a rough and ragged contour, while the PACl-E flocs were formed with a smooth and glossy structure.     

Modeling high adsorption capacity and kinetics of organic macromolecules on super-powdered activated carbon

The capacity to adsorb natural organic matter (NOM) and polystyrene sulfonates (PSSs) on small particle-size activated carbon (super-powdered activated carbon, SPAC) is higher than that on larger particle-size activated carbon (powdered-activated carbon, PAC). Increased adsorption capacity is likely attributable to the larger external surface area because the NOM and PSS molecules do not completely penetrate the adsorbent particle; they preferentially adsorb near the outer surface of the particle. In this study, we propose a new isotherm equation, the Shell Adsorption Model (SAM), to explain the higher adsorption capacity on smaller adsorbent particles and to describe quantitatively adsorption isotherms of activated carbons of different particle sizes: PAC and SPAC. The SAM was verified with the experimental data of PSS adsorption kinetics as well as equilibrium. SAM successfully characterized PSS adsorption isotherm data for SPACs and PAC simultaneously with the same model parameters. When SAM was incorporated into an adsorption kinetic model, kinetic decay curves for PSSs adsorbing onto activated carbons of different particle sizes could be simultaneously described with a single kinetics parameter value. On the other hand, when SAM was not incorporated into such an adsorption kinetic model and instead isotherms were described by the Freundlich model, the kinetic decay curves were not well described. The success of the SAM further supports the adsorption mechanism of PSSs preferentially adsorbing near the outer surface of activated carbon particles.     

Floc structural characteristics using conventional coagulation for a high doc, low alkalinity surface water source

Removal of natural organic matter (NOM) is well established using metal salt coagulants. In addition, flocculant aids are also commonly used to improve solid removal. The objectives of this paper is to describe the impacts of both NOM and polymer on floc structure. The study offers a comparison of floc physical characteristics for coagulant precipitate flocs, organic-coagulant flocs and organic-coagulant-polymer flocs for optimum coagulant and polymer doses. A ferric sulphate-based coagulant was used as the primary coagulant and the polymer selected was a high molecular weight (MW) cationic polydiallyldimethylammonium chloride (polyDADMAC). Floc size, breakage, re-growth and settling characteristics were measured. Precipitate flocs were larger than organic flocs and had better settling characteristics when compared to NOM-coagulant flocs. When polymer was added, floc size and compaction was seen to further reduce. An explanation was offered in terms of the mode of flocculation involved. Floc breakage behaviour showed that polymer reduced the rate of floc degradation but did not greatly improve floc re-growth potential after breakage, which was generally poor for all of the suspensions.     

粉末活性炭/污泥回流工艺强化膜前预处理的研究

采用粉末活性炭(PAC)吸附/混凝沉淀/浸没式超滤膜组合工艺处理苏州市某河水,考察了PAC/污泥回流工艺对膜前预处理的强化效果及对膜污染的影响,并与常规混凝沉淀、污泥回流强化混凝沉淀、PAC吸附/混凝沉淀等3种预处理工艺进行了对比。结果表明,PAC/污泥回流强化预处理工艺对浊度、DOC、UV254和THMFP的去除率分别为80.2%、47.5%、42.3%和52.3%,均比其他预处理工艺的高,对MW30 ku和MW1 ku有机物的去除效果明显。PAC/污泥回流强化预处理和超滤膜组合工艺对浊度、DOC、UV254和THMFP的去除率分别可达到99.2%、54.1%、47.2%和60.2%;经过15 d的运行,超滤膜的跨膜压差基本保持稳定,而其他预处理工艺虽能在一定程度上减轻膜污染,但无法避免不可逆膜污染的发生。