Redox behavior of gold supported on ceria and ceria-zirconia based catalysts

A series of gold-based catalysts were prepared by deposition precipitation or incipient wetness impregnation on CexZ1-xO2 solid solutions (0.28≤x≤1.00). The morphological and structural characterization of these catalysts were carried out with X-ray diffraction, trans-mission electron microscopy (TEM) analysis and physical adsorption technique, and their redox properties were studied by temperature pro-grammed reduction using both H2 and CO as probe molecules. Two cycles of oxidation/reduction were carried out in order to evaluate the effects of redox aging and gold sintering on the oxygen exchange capability. As observed with other noble metals, gold enhanced and pro-moted the ceria reduction at lower temperatures. Reduction by CO was shown to be dependent on the fine dispersion of gold and to be nega-tively affected by the ageing process more than reduction with hydrogen. This might have implications in reactions like water gas shift and CO-PROX which involve CO as a main reactant.     

Catalytic combustion of soot over Ru-doped mixed oxides catalysts

We employed modified substrates as outer heterogeneous catalysts to reduce the soot originating from the incomplete diesel combustion. Here, we proposed that ceria（CeO2）-based catalysts could lower the temperature at which soot combustion occurred from 610 oC to values included in the operation range of diesel exhausts（270–400 oC）. Here, we used the sol-gel method to synthesize catalysts based on mixed oxides（ZnO：CeO2） deposited on cordierite substrates, and modified by ruthenium nanoparticles. The presence of ZnO in these mixed oxides produced defects associated with oxygen vacancies, improving thermal stability, redox potential, sulfur resistance, and oxygen storage. We evaluated the morphological and structural properties of the material by X-ray diffraction（XRD）, Brumauer-emmett-teller method（BET）, temperature programmed reduction（H2-TPR）, scanning electron microscopy（SEM）, and transmission electron microscopy（TEM）. We investigated how the addition of Ru（0.5 wt.%） affected the catalytic activity of ZnO：CeO2 in terms of soot combustion. Thermogravimetric analysis（TG/DTA） revealed that presence of the catalyst decreased the soot combustion temperature by 250 oC, indicating that the oxygen species arose at low temperatures, which was the main reason for the high reactivity of the oxidation reactions. Comparative analysis of soot emission by diffuse reflectance spectroscopy（DRS） showed that the catalyst containing Ru on the mixed oxide-impregnated cordierite samples efficiently oxidized soot in a diesel stationary motor： soot emission decreased 80%.     

Influence of Additives Ceria and Lanthana on Performance of Pd／Al／Monolith Honeycomb Catalysts

The effects of ceria and lanthana additives on activity and thermal stabilization of the catalysts for CO oxidation were studied. The results show that the addition of CeO2 clearly improves the catalytic activity, which may derive from the synergic effect between CeO2 and PdO. The catalysts were characterized by means of temperature-programmed reduction (TPR) and X-ray photoelectron spectroscopy (XPS) measurements. The XPS results of a slight increase in metal oxidation state reflect that the charge transfers from metal to ceria and ceria is slightly reduced, which leads to a decrease of the Ce-O bond strength. Pd-Ce synergism affects the reduction behavior of the catalysts. The TPR results show that the CeO2 ad-dition lowers the reduction temperature of PdO, while palladium facilitates the reduction of the ceria. For PdO/La2O3/Al2O3/monolith honeycomb catalysts, the aging test measurements at 1050 ℃ and the XRD results show that the formation of LaAlO3 which neutralizes the surface alumina defects inhibits the sintering of alumina.     

Effective removal of automobile exhausts over flower-like Ce1−xCuxO2 nanocatalysts exposed active {100} plane

This work elucidates the synthesis and characterization of copper ions incorporated ceria(Ce_(1-x)Cu_xO_2)nanocatalysts with 3 D flower-like and nanocrystalline morphology for the purification of automobile exhausts. XRD and Raman results confirm the presence of copper ions in ceria. The 3 D flower-like and nanocrystalline morphology exhibited by these catalysts were seen by FESEM images. HRTEM and SAED results confirm that(100) plane is dominantly presented in 3 D flower-like Ce_(1-x)Cu_xO_2 catalysts when compared to nanocrystalline morphology. The textural properties of synthesized catalysts was done with the help of N2 sorption study, which confirms that flower-like Ce_(1-x)Cu_xO_2 catalysts show high surface area and pore volume. The existence of Ce~(3+), Ce~(4+), Cu~+ and Cu~(2+) ions in the catalyst were examined by XPS and DR UV-Vis techniques. Oxygen storage capacity(OSC) of the catalysts was studied by H_2-TPR analysis. These characterization results elucidate the presence of dominant active sites(Ce~(3+), Ce~(4+), Cu~+and Cu~(2+)) and {100} plane in the flower-like morphology compared to nanocrystalline. The catalytic activity of synthesized Ce_(1-x)Cu_xO_2 catalysts was tested for removal of CO, HC_x and NO gases from automobile emission with respect to the copper content and morphology. The obtained results indicate that the presence of optimum amount of copper in ceria with flower-like morphology is essential for the removal of CO, HC_x and NO at low temperature via redox process, which is due to the presence of active sites on the dominant {100} plane.     

Effect of samarium and praseodymium addition on water gas shift performance of Co/CeO2 catalysts

The performance of Co supported over ceria and doped ceria (by Sm and Pr) catalysts towards the water gas shift reaction was studied for the removal of CO from syngas to produce high purity hydrogen for a fuel cell application. It is found that 1%Co/Ce-5%Sm-O yields the highest catalytic performance towards this reaction compared with undoped-Sm and doped-Pr. An addition of Sm onto ceria support reveals a small crystallite size with high surface area and well dispersed cobalt on ceria surface. Moreover, a presence of Sm increases the reducibility of cobalt species and surface oxygen. The positive effect of Sm on increasing the WGS activity of Co/CeO₂ is because Sm contributes to the reduction of Ce⁴⁺ to Ce³⁺ which gives rise to oxygen vacancies and facilitates the electron movement at the surface leading to an ease of surface reduction.     

Temperature Programmed Reduction Studies on CeO2-Containing Catalysts

Temperature programmed reduction (TPR) study was carried out for CeO2/A12O3 and CeO2/ZrO2 catalysts to evaluate oxygen storage property induced by a facile redox cycling of Ce ion. The CeO2/ZrO2 catalyst possesses excellent oxygen storage activity at 373 K after reduction above 1173 K although the oxygen storage of CeO2/Al2O3 catalyst after reduction above 1173 K is poor because of the formation of CeAlO3. Consequently, the oxygen storage on the CeO2/ZrO2 catalyst smoothly occurs from low temperatures when the catalyst is reduced even at high temperatures.     

A highly active VOx-MnOx/CeO2 for selective catalytic reduction of NO: The balance between redox property and surface acidity

Excellent catalysts with low-temperature activity and relatively wide temperature window for selective catalytic reduction of NO with ammonia (NH₃-SCR) are highly demanded in view of the practical treatment of NO. Herein, we have designed a highly active VO_x-MnO_x/CeO₂ material based on the intrinsic requirement of SCR reaction for catalyst, namely redox sites and surface acid sites. The vanadium oxide and manganese oxide are highly dispersed over the ceria mesosphere via simple incipient wetness impregnation. The loading of manganese could introduce acid sites and enhance the redox property remarkably, while the loading of vanadium increases acid sites and weakens redox property. Through tentatively controlling the appropriate loading ratio of the two components, the optimal catalyst achieves a balance between redox property and surface acidity. The work shed light on the development of new SCR catalyst with superior low temperature activity, wide work temperature window and good hydrothermal stability.     

Ceria modified three-dimensionally ordered macro-porous Pt/TiO2 catalysts for water-gas shift reaction

Three-dimensionally ordered macro-porous(3DOM) TiO2 and ceria-modified 3DOM TiO2 supported platinum catalysts were pre-pared with template and impregnation methods, and the resultant samples were characterized by scanning electron microscopy(SEM), X-ray dif-fractometer(XRD), high-resolution transmission electron microscopy(HRTEM) and texture programmed reduction(TPR) techniques. The catalytic performances over the platinum-based catalysts were investigated for water-gas shift (WGS) reaction in a wide temperature range macro-porous catalyst, owing to the macro-porous structure favoring mass uansfer. Addition of ceria into 3DOM Pt/TiO2 led to improvement of catalytic activity. TPR and HRTEM results showed that the interaction existed between ceria and titanium oxide and addition of ceria promoted the reducibility of platinum oxide and TiO2 on the interface of platinum and TiO2 particles, which contributed to high activity of the ceria modi-fied catalysts. The results indicated that ceria-modified 3DOM Pt/TiO2 was a promising candidate of fuel cell oriented WGS catalyst.     

Structure and Catalytic Behavior of CuO-ZrO-CeO2 Mixed Oxides

The effect of doping CuO on the structure and properties of zirconia-ceria mixed oxide was studied. The results show that addition of CuO decreases the reduction temperature of ceria, and stabilizes the cubic structure of mixed oxides, and enhances catalytic activity of CuO-ZrO-CeO2 mixed oxides for CO oxidation. Increasing ceria content in the mixed oxides can enhance the catalytic activity, but some impurities such as sulfate make catalytic activity falling. There is little effect of calcination temperature on catalytic activities, implying that these catalysts are effective with good thermal stability.     

Synergetic catalysis of ceria and titania for selective reduction of NO

The promotional effect of the interaction between titania and ceria on the catalytic performance for selective reduction of NO was studied.The catalysts,CeO 2,TiO 2,CeO 2 /TiO 2 and Ti x Ce 1-x O 2,were synthesized and tested in NH 3-Selective catalytic reduction(SCR) of NO,and the samples were characterized by the Brunaller,Emmett and Teller(BET absorbed gas N 2),X-ray diffraction(XRD),high resolution transmission electron microscopy(HR-TEM),and temperature programmed desorption(TPD NH 3) techniques.The improvement mechanism of the interaction between the titania and ceria had been explored and discussed from two aspects of micro-structure and surface acidity.The interaction between the titania and ceria greatly improved the catalytic activity but had little effect on the active temperature.It was first reported that the acid amount determined the catalytic activity and the acid strength determined the active temperature for NH 3-SCR of NO.     

Getting insights into gas-phase sulfation effect on catalytic performance of praseodymium oxides in NH3-SCR of NO

Sulfation treatment has been widely used to promote the catalytic performance of ceria(CeO₂) based catalysts for the selective catalytic reduction of NO by NH₃(NH₃-SCR of NO).Praseodymium oxide(PrO_x),another commonly used rare earth material with similar structural properties as CeO₂,also shows satistactory redox properties due to the facile redox cycle of Pr³⁺■Pr⁴⁺.In this work,gas phase sulfation treatment with varied...     

Hydrothermal and sulfur aging of CeTi/CeWTi catalysts for selective catalytic reduction of NO_x with NH_3

The CeO_2-TiO_2(CeTi)and CeO_2/WO_3-TiO_2(CeWTi)catalysts were prepared by sol-gel method.The asprepared catalysts were hydrothermally treated at 760 ℃ for 48 h in air containing 10 vol% H_2O to obtain the hydrothermal aged catalysts.The sulfur aged catalysts were treated at 400 ℃ with 100 ppm SO_2,10%water vapor,air balance for 48 h and catalysts.The powder X-ray diffraction(XRD)and Raman results indicate that the crystallization of hydrothermal aged catalysts is more serious than sulfur aged catalysts.In addition,tungsten species can stabilize the CeTi catalyst from grain growth.According to the results of in situ diffuse reflectance infrared Fourier transform spectra(DRIFTS),temperatureprogrammed desorption of ammonia(NH_3-TPD),H_2 temperature-programmed reduction(H_2-TPR)and ammonia oxidation,the aging process leads to loss of surface area,redox properties,surface acidities and surface ceria concentration,especially for the hyd rothermal aging.The NH_3-NO/NO_2 SCR perfo rmances of sulfur aged catalysts are better than that of hydrothermal aged catalysts.Compared with CeTi catalyst,the addition of tungsten inhibits the crystallization of catalyst.So that more acid sites and active sites are retained.This is also the reason why tungsten addition improves the NH_3-NO/NO_2 SCR performance of CeTi catalyst.     

Effect of tungsten oxide on ceria nanorods to support copper species as CO oxidation catalysts

In this work,tungsten oxide with different concentrations(0,0.4 at%,2.0 at% and 3.2 at%) was introduced to the ceria nanorods via a deposition-precipitation(DP) approach,and copper species of ca.10 at% were sequentially anchored onto the modified ceria support by a similar DP route.The aim of the study was to investigate the effect of the amount of tungsten oxide(0,0.4 at%,2.0 at%,and 3.2 at%) modifier on the copper-ceria catalysts for CO oxidation reaction and shed light on the structure-activity relationship.By the aids of multiple characterization techniques including N_2 adsorption,high-resolution transmission electron microscopy(HRTEM),powder X-ray diffraction(XRD),X-ray absorption fine structure(XAFS),and temperature-programmed reduction by hydrogen(H_2-TPR) in combination with the catalytic performance for CO oxidation reaction,it is found that the copper-ceria samples maintain the crystal structure of the fluorite fcc CeO_2 phase with the same nanorod-like morphology with the introduction of tungsten oxide,while the textural properties(the surface area,pore volume and pore size) of ceria support and copper-ceria catalysts are changed,and the oxidation states of copper and tungsten are kept the same as Cu~(2+)and W~(6+)before and after the reaction,but the introduction of tungsten oxide(WO_3)significantly changes the metal-support interaction(transfer the CuO_x clusters to Cu-[O_x]-Ce species),which delivers to impair the catalytic activity of copper-ceria catalysts for CO oxidation reaction.     

Preparation and characterization of Cu-Ce-La mixed oxide as water-gas shift catalyst for fuel cells application

Cu-Ce-La mixed oxides were prepared by three precipitation methods （coprecipitation, homogeneous precipitation, and deposition precipitation） with variable precipitators and characterized using X-ray diffraction, BET, temperature-programmed reduction, and catalytic reaction for the water-gas shift. The Cu-Ce-La mixed oxide prepared by coprecipitation method with NaOH as precipitator presented the highest activity and thermal stability. Copper ion substituted quadrevalent ceria entered CeO2 （111） framework was in favor of activity and thermal stability of catalyst. The crystallinity of fresh catalysts increased with the reduction process. La^3＋ or Ce^4＋ substituted copper ion entered the CeO2 framework during reduction process. The coexistence of surface copper oxide （crystalline） and pure bulk crystalline copper oxide both contributed to the high activity and thermal stability of Cu-Ce-La mixes oxide catalyst.     

Construction of mesoporous ceria-supported gold catalysts with rich oxygen vacancies for efficient CO oxidation

Bearing unique redox nature and high oxygen storage capacity, ceria (CeO₂) has always been a promising CO oxidation catalyst support for gold (Au) catalysts and the like. Herein, a series of Au–CeO₂–P (P stands for pH value) samples was prepared by a co-precipitation method with the assistance of an alkaline environment and amino groups functionalized ordered mesoporous polymer (OMP-NH₂). Afterward, all samples described above were characterized that the Au–CeO₂–P catalysts are made of Au–Ce–O solid solution and Au nanoparticles (NPs) supported on CeO₂. It turns out that OMP-NH₂ is not just a simple sacrificial template for mesoporous structure, but also plays an important role as an amino source, explaining the presence of rich oxygen vacancies. Due to the concentration of oxygen vacancies in Au–Ce–O solid solution is the key factor for the oxygen mobility of CO oxidation, the catalytic results also demonstrate that the catalytic activity of Au–CeO₂–P catalysts is related to the concentration of their oxygen vacancies. Moreover, Au–CeO₂-9.6 with a highest concentration of oxygen vacancies (as high as 13.98%) in Au–CeO₂–P catalysts exhibits the best catalytic activity (complete conversion at 10 °C).     

New insights into the role of vanadia species as active sites for selective catalytic reduction of NO with ammonia over VO_x/CeO_2 catalysts

A series of VO_x/CeO_2 catalysts we re synthesized via vanadia supported on ceria with different BET surface areas.The catalysts were employed to investigate the active sites for the selective catalytic reduction of NO with NH_3(NH3-SCR).The kinetic results show that VO_x/CeO_2 catalysts exhibit nearly constant apparent activation energies(E_a),indicating the same SCR reaction mechanism.The V-O-Ce bridging modes and oligomeric VO_x were identified and quantified by Raman,FT-IR and H_2-TPR.The amounts of the V-O-Ce bridging modes calculated by H_2-TPR are correlated to the NH_3-SCR intrinsic reaction rates.The turnover frequencies(TOFs) show a constant value at the same temperature,which were calculated based on the number of V-O-Ce bridging modes of VO_x/CeO_2 catalysts.Therefore,it can be concluded that the V-O-Ce bridging modes are the active sites of VO_x/CeO_2 catalysts for the NH3-SCR reaction.     

Novel Salt-Assisted Combustion Synthesis of High Surface Area Ceria Nanopowders by An Ethylene Glycol-Nitrate Combustion Process

Ceria and ceria-based powders are candidate ma-terials for a wide range of applications ,for example ,solid electrolytes for solid oxide fuel cells (SOFC)[1],three way catalysts for the treatment of automotive ex-haust gases[2],petroleum-cracking catalyst[3],oxygensensors[4], chemical-mechanical polishing for micro-electronics[5],and UVfilter[6].In recent years , since high surface area ceriananoparticles show superior physical and chemicalproperties to bulk particles , much effort has been …     

Effect of manganese and/or ceria loading on V_2O_5-MoO_3/TiO_2 NH_3 selective catalytic reduction catalyst

The effect of manganese and/or ceria loading of V_2 O_5-Mo_O_3/TiO_2 catalysts was investigated for selective catalytic reduction(SCR) of NO_x by NH_3.The manganese and/or ceria loaded V_2 O_5-MoO_3/TiO_2 catalysts we re prepared by the wetness impregnation method.The physicochemical characteristics of the catalysts were thoroughly characterized.The catalytic performance of 1.5 wt% V_2 O_5-3 wt% MoO_3/TiO_2(V1.5 Mo3/Ti) is greatly enhanced by addition of 2.5 wt% MnO_x and 3.0 wt% CeO_2(V1.5 Mo3 Mn2.5 Ce3/Ti) below450℃.Compared with the V1.5 Mo3/Ti catalyst with NO_x conversion of 75% at 275 ℃,V1.5 Mo3 Mn2.5 Ce3/Ti exhibits higher NO_x conversion of 84% with good resistance to SO_2 and H_2 O at a gas hourly space velocity value of 150000 h~(-1).The active manganese,cerium,molybdenum,and vanadium oxide species are highly dispersed on the catalyst surface and some synergistic effects exist among these species.Addition of MnO_x significantly enhances the redox ability of the cerium,vanadium,and molybdenum species.Addition of Ce increases the acidity of the catalyst.More active oxygen species,including surface chemisorbed oxygen,form with addition of Mn and/or Ce.Because of the synergistic effects,appropriate proportions of manganese in different valence states exist in the catalysts.In summary,the good redox ability and the strong acidity contribute to the high NH3-SCR activity and N2 selectivity of the V1.5 Mo3 Mn2.5 Ce3/Ti catalyst in a wide temperature range.And the V1.5 Mo3 Mn2.5 Ce3/Ti catalyst shows good resistance to H_2 O and SO2 in long-time catalytic testing,which can be ascribed to the highly sulfated species adsorbed on the catalyst.     

La-Hexaaluminate Catalyst Preparation and Its Performance for Methane Catalytic Combustion

The La-hexaaluminate catalysts with high performance ration method with the buffer solution of NH4HCO3 and NH4OH were synthesized by the modified controllable co-precipimixture as the precipitation agent. The physicochemical properties of catalysts were characterized by the means of BET, XRD, and TPR techniques. With methane catalytic combustion as the probe reaction, the catalytic performances were also tested on a fixed bed, continual flow system. The resuits show that it is a good method to obtain chemical homogeneous hexaaluminate materials by the buffer solution as the precipitation agent. The La-hexaaluminate can be formed at low temperatures ranging from 1050 to 1200 ℃. The cerium introduction plays a great role in the methane catalytic combustion on La-Mn hexaaluminate because of its high oxygen storage capacity property and the well synergic effect between Ce and Mn. However, the CeO2 appears in hexaaluminate through the XRD pattern, which reveals that Ce can not enter the crystal lattice position. Mn introduction improves the methane catalytic activity to a large extent due to its high redox property. When Mn atomic substitution amount for A1 is 2, the hexaaluminate shows the highest activity, and the catalyst possesses good H2 consumption and redox performance. Mn can easily occupy the hexaaluminate crystal position, which reveals that the Mn substitute La-hexaaluminate is a promising high temperature methane combustion catalyst with high activity and good stability.     

Promotion effect of niobium on ceria catalyst for selective catalytic reduction of NO with NH3

The CeO₂, Ce–Nb–O_x and Nb₂O₅ catalysts were synthesized by citric acid method and the promotion effect of Nb on ceria for selective catalytic reduction (SCR) of NO with NH₃ was investigated. The catalytic activity measurements indicate that the mixed oxide Ce–Nb–O_x presents a higher SCR activity than the single oxide CeO₂ or Nb₂O₅ catalyst. In addition, the Ce–Nb–O_x catalyst shows high resistance towards H₂O and SO₂ at 280 °C. The Raman, X-ray photoelectron spectra and temperature programmed reduction with H₂ results indicate that the incorporation of Nb provides abundant oxygen vacancies for capturing more surface adsorbed oxygen, which provides a superior redox capability and accelerates the renewal of active sites. Furthermore, the Fourier transform infrared spectra and temperature programmed desorption of NH₃ results suggest that niobium pentoxide shows high surface acidity, which is partly retained in the Ce–Nb–O_x catalyst possessing a high content of Lewis and Brønsted acid sites. Therefore, the incorporation of Nb improves both the redox and acidic capacities of Ce–Nb–O_x catalyst for the SCR reaction. Here, the redox behavior is primarily taken on Ce and the acidity is well improved by Nb, so the synergistic effect should exist between Ce and Nb. In terms of the reaction mechanism, in situ DRIFT experiments suggest that both NH₃ on Lewis acid sites and NH₄⁺ on Brønsted acid sites can react with NO species, and adsorbed NO and NO₂ species can both be reduced by NH₃. In the SCR process, O₂ primarily acts as the accelerant to improve the redox and acid cycles and plays an important role. This work proves that the combination of redox and acidic properties of different constituents can be feasible for catalyst design to obtain a superior SCR performance.