Synthesis and anti-bacterial activity of Cu, Ag and Cu-Ag alloy nanoparticles: A green approach

Metallic and bimetallic nanoparticles of copper and silver in various proportions were prepared by microwave assisted chemical reduction in aqueous medium using the biopolymer, starch as a stabilizing agent. Ascorbic acid was used as the reducing agent. The silver and copper nanoparticles exhibited surface plasmon absorption resonance maxima (SPR) at 416 and 584 nm, respectively; while SPR for the Cu-Ag alloys appeared in between depending on the alloy composition. The SPR maxima for bimetallic nanoparticles changes linearly with increasing copper content in the alloy. Transmission electron micrograph (TEM) showed monodispersed particles in the range of 20 ± 5 nm size. Both silver and copper nanoparticles exhibited emission band at 485 and 645 nm, respectively. The starch-stabilized nanoparticles exhibited interesting antibacterial activity with both gram positive and gram negative bacteria at micromolar concentrations.     

A photochemical method for controlling the size of CdS nanoparticles

The optical and electrical properties of semiconductor nanoparticles are strongly dependent on their size. A flexible control of the size of the nanoparticles is of interest for tuning their properties for different applications. Here we use a coupled method to control the size of CdS nanoparticles. The method involves the photochemical growth of CdS nanoparticles together with the use of a capping agent as an inhibiting factor. CdS nanoparticles were formed through a photoinduced reaction of CdSO(4) and Na(2)S(2)O(3) in an aqueous solution. Mercaptoethanol (C(2)H(6)OS) was used as the capping agent, and we investigated the effect of illumination time, illumination intensity and the concentration of capping agent on the nanoparticle size. Transmission electron microscopy (TEM) shows crystalline nanoparticles with relatively low dispersion. Optical absorption spectroscopy was mainly used to measure the band gap and size of the nanoparticles. Increasing the illumination time or illumination intensity increases the nanoparticle size, while higher capping agent concentration leads to smaller nanoparticle size. A band gap range of 2.75-3.4?eV was possible with our experimental conditions, corresponding to a 3.2-6.0?nm size range.     

Ascorbic acid-mediated synthesis and characterisation of iron oxide/gold core–shell nanoparticles.

The current article reports on providing surface modification of magnetic nanoparticles with gold to provide stability against aggregation. Gold-coated magnetite nanoparticles were synthesised to combine both magnetic as well as surface plasma resonance (SPR) properties in a single moiety. The nanocomposites were produced by reduction (using ascorbic acid) of gold chloride on to the surface of iron oxide nanoparticles. Ascorbic acid not only acts as a reducing agent, but also the oxidised form of ascorbic acid i.e. Dehydro-ascorbic acid acts as a capping agent to impart stability to as synthesised gold-coated iron oxide nanocomposites. The synthesised nanocomposite was monodispersed with a mean particle size of around 16 nm and polydispersity index of 0.190. X-ray diffraction analysis confirms presence of gold on the surface of magnetite nanoparticles. The synthesised nanocomposites had a total organic content of around 3.2% w/w and also showed a shifted SPR peak at 546 nm as compared to gold nanoparticles (528 nm). Both uncoated and gold-coated magnetite exhibited superparamagnetic behaviour at room temperature. Upon coating with gold shell, saturation magnetisation of iron oxide nanoparticles decreases from 42.806 to 3.54 emu/gram.     

Sonochemical synthesis of highly monodispersed and size controllable Ag nanoparticles in ethanol solution

Highly monodispersed Ag nanoparticles (NPs) were prepared by a sonochemical method, in which Ag⁺ in an ethanol solution of AgNO₃ was reduced by ultrasound irradiation in the presence of benzyl mercaptan without the additional step of introducing other reducing reagents or protective reagents. In addition to the stabilizing effect, benzyl mercaptan remarkably enhanced the reduction rate, probably due to the thermal decomposition that occurs at the interfacial region between cavitation bubbles and bulk solution and provides reducing radicals. More importantly, the size of Ag NPs can be controlled by simply tuning the initial molar ratio of benzyl mercaptan to Ag, which was confirmed by transmission electron microscopy and ultraviolet-visible absorption spectrometry, as well as X-ray diffraction.     

羟基离子液体中单晶金纳米片的制备与表征(英文)

羟基功能化离子液体氯化1-(3-羟丙基)-3-甲基咪唑中,微波加热还原HAuCl4.4H2O制备了多边形单晶金纳米片,制备过程不需要额外添加包覆剂。产物用扫描电镜、透射电镜、选区电子衍射、能谱、X射线衍射和紫外可见分光光度计等进行了表征。产物的形状和大小可以通过控制反应条件如反应温度、反应物浓度等进行控制。50毫克HAuCl4.4H2O溶解于1毫升羟基功能化离子液体中,在140℃进行还原反应时,得到平面尺寸达16微米,厚度约为35纳米的单晶金纳米片。在单晶金纳米片的制备反应中,离子液体氯化1-(3-羟丙基-)3-甲基咪唑同时起到了反应介质、还原剂和包覆剂的作用。     

Radiation induced synthesis and characterization of copper nanoparticles

Capped copper nanoclusterswere successfully synthesized by gamma radiolysis method by optimizing various conditions like metal ion concentration, polymer or surfactant concentration and pH. The increasing amount of capping agent was responsible for decrease in size as small as 17 nm of the metal clusters. The radiolytic method provides copper nanoparticles in fully reduced and highly pure state compared to other synthetic routes. Formation of copper nanoclusters (FCC) was confirmed by X-ray diffraction technique. UV-vis spectrophotometry was employed to examine changes in plasmon resonance absorption peaks of copper metal. The purity of copper particles was further confirmed by electron spin resonance studies. Transmission electron microscopy results revealed the particle size distribution from 17 to 80 nm. Electron diffraction pattern confirms FCC copper phase. The role of various parameters in the formation of stable copper clusters is discussed.     

Structural,spectroscopic and biological investigation of copper oxides nanoparticles with various capping agents

Powder composed of copper oxides nanoparticles with various capping agents has been synthesized and characterized with the use of X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and X-ray diffraction (XRD). Polyvinyl alcohol (PVA), glycol propylene, glycerin and glycerin plus ammonia were used as capping agents. The scanning electron microscopy (SEM) studies showed that nanoparticles form agglomerates with the size from 80 to 120 nm while particles size determined from the XRD experiment was in the range from 7 to 21 nm. XPS and XRD experiments revealed that depending on capping and reducing agents used in the synthesis nanoparticles are composed of Cu₂O, CuO or a mixture of them. The biological activity test performed for a selected sample where the capping agent was glycerin plus ammonia has shown promising killing/inhibiting behavior, very effective especially for Gram negatives bacteria.     

核壳结构CdS/ZnS荧光量子点的制备与荧光性能研究

以氧化镉为镉源、硫单质为硫源、油酸为配体、在十八烯体系中合成单分散的CdS纳米颗粒,研究了配体浓度对纳米微粒的生长动力学、颗粒尺寸分布的影响.采用乙基黄原酸锌作为Zn、S源的反应前体,采用逐滴滴加的方法制备了具有核壳结构的CdS/ZnS量子点,吸收光谱和荧光光谱表明CdS/ZnS纳米粒子比单一的CdS纳米粒子具有更优异的发光特性.透射电子显微镜、X射线粉末衍射、X射线光电子能谱、选区电子衍射证明ZnS在CdS表面进行了有效包覆.所制备核壳结构纳米粒子具有较好的尺寸分布,荧光发射峰半高峰宽为18～20nm,荧光量子产率达40%.     

微波辅助液相还原法制备超细铜粉

以硫酸铜为原料,水合肼为还原剂,采用微波辅助液相还原法制备了超细铜粉,研究了微波的引入对超细粉体制备的影响,通过XRD、激光粒度分析和TEM表征了粉体的结晶性能、粒度度以及粉体的形貌,研究表明,微波的引入可以明显加速晶化反应的进行,在较短时间内制得的铜纳米晶发育好于传统热处理方式制得的铜纳米晶。     

Facile fabrication of ultrasmall and uniform copper nanoparticles

Ultrasmall and uniform copper nanoparticles were synthesized through a trace-level ethylenediaminetetraacetic acid (EDTA)-assisted wet chemical route in which Cu(OH)₂ colloid, KBH₄ and polyvinyl pyrrolidone (PVP) were used as the Cu source, the reducing agent, and the protective agents, respectively. The copper nanoparticles exhibit a spherical morphology with a narrow size distribution, a uniform shape, and the average diameter of ca. 4 nm. The presence of trace EDTA is indispensable for the preparation of ultrasmall and uniform copper nanoparticles. EDTA concentration directly influences the copper nanoparticle size and uniformity. As EDTA concentration decreases, the size of the copper nanoparticles decreases, whereas the uniformity increases. The possible formation mechanism of ultrasmall and uniform copper nanoparticles was determined according to experimental results.     

Preparation of fine copper powder using ascorbic acid as reducing agent and its application in MLCC

The preparation of ultrafine copper powder with chemical reduction method was investigated. Ascorbic acid was employed as reducing agent. Reaction of CuSO₄·5H₂O with ascorbic acid at 70 °C gives polyhedron monodispersed ultrafine copper powder. The copper powder having excellent dispersibility was prepared when the pH value was controlled at 6 with aqueous ammonia. Influences of reaction temperature on the efficiency of copper powders were also studied. TG/DTG/DTA of copper powder was discussed with thermal analyzer. As-prepared copper powder was applied in BME-MLCC. The micro-structures of end termination and interface were discussed with SEM and polarized light microscope. The copper end termination has high adhesion force, excellent solderibility behavior and resistance behavior to soldering.     

Effect of additives on the morphology of single-crystal Au nanosheet synthesized using the polyol process

Triangular and hexagonal-shaped single-crystal Au nanosheets were prepared by the reduction of HAuCl₄ with the polyol method, after addition of a polyvinylpyrolidone (PVP) capping agent and salts. Both capping agent and salts played a crucial role during nanosheet growth. The high PVP concentration was found to result in a mixed Au morphology of sheets and spherical particles, which could be tailored with the addition of salts to provide solely nanosheets. The main product is always nanosheets after the salts have been added. The selective adsorption of PVP and salt ions onto certain crystallographic facets is thought to be important in the proposed growth mechanism. This synthetic route is simple and fast, and can be extended to other morphology metal particles with careful salt and capping agent selection.     

One pot synthesis and characterization of ultra fine CeO2 and Cu/CeO2 nanoparticles. Application for low temperature CO oxidation

Ultra fine cerium oxide and copper doped cerium oxide nanoparticles are prepared in a one-step reaction by thermal decomposition of Ce acetate in commercial oleylamine. The products are highly crystalline and were characterized by XRD, Raman spectroscopy, XPS, TEM and BET. The TEM images show that the CeO2 particles prepared are uniformly nanosized. The size of the nanoparticles can be controlled in the sub-10 nm range by the presence of other capping agent in the reaction mixture such as tri-octylphosphine oxide and oleic acid. The copper doped cerium oxide nanoparticles show high specific surface area (up to 299 m2/gr) and high catalytic activity for the low temperature CO oxidation even at low copper loading such as 9 at.%.     

Low temperature synthesis of ZnSe nanoparticles

Synthesis of thioglycerol capped zinc selenide nanoparticles with a relatively narrow size distribution by a simple and inexpensive low temperature (~ 80 °C) wet chemical method is reported here. Main advantage of this method is the use of non-toxic precursors. The size of the nanoparticles can be varied easily by changing the concentration of the capping agent. The extracted nanoparticles remain stable under normal atmospheric conditions and can be redispersed in suitable solvents. The sharp absorption features obtained in the UV-Visible absorption spectra reveal the formation of monodispersed ZnSe nanoparticles. The nanoparticles were characterized using X-ray photoelectron spectroscopy, X-ray diffraction, UV-Visible absorption spectroscopy, photoluminescence and transmission electron microscopy.     

Synthesis and size dependent optical studies in CdSe quantum dots via inverse micelle technique

Cadmium selenide quantum dots (CdSe QDs) were successfully synthesized without using trioctylphosphine (TOP). The XRD pattern showed zinc-blend phase of the CdSe QDs. The absorption and PL spectra exhibit a strong blue shift as the QDs size decreases due to the quantum confinement effect. In addition, the quantum efficiency of CdSe QDs with TOP capping is higher than CdSe QDs with oleic acid capping. TEM image shows a spherical shape, compact and dense structure of CdSe QDs. A good agreement between the Tauc's model and experimentally measured absorption spectra of CdSe QDs is achieved. The FTIR peak at ～1712 cm^?1 spectra confirms the influence of oleic acid as a capping agent.     

铜包覆碳化硅复合粉体材料的制备及表征

选用平均粒径约为50～100μm的碳化硅颗粒作为基料,以水合联氨为还原剂、氨水为络合剂,利用非均相成核法制备铜包覆碳化硅复合粉体材料,在温度为83℃时得到了分散效果较好的复合粉体,采用XRD、SEM、EDS对复合粉体进行了表征,结果表明,制备的铜微晶粒径为100nm左右,碳化硅颗粒表面的铜包覆层均匀、连续.     

Efficiency of Hydrothermal Synthesis of Nano/Microsized Copper and Study on In Vitro Antifungal Activity

In this study, the synthesis and characterization of copper nano/microparticles in the presence of (2,2′,2″,2″′-(ethane-1,2-diylbis(azanetriyl))tetraacetohydrazide) as a capping and reducing agent under hydrothermal conditions for use in biological conditions were investigated. The effects of reductant ligand/copper ion, concentration ratios, reaction temperatures, and reaction time on the various morphologies of copper nano/microparticles were studied. The obtained particles have been characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray spectrum analysis (EDAX), and zeta potential analysis. Further, the formation of particles with different morphologies was confirmed. The biological and antifungal effects of these selected particles were compared with those of the Bordeaux mixture. Experiments were conducted on Alternaria alternata, Alternaria solani, and Fusarium expansum as three types of phytopathogenic fungi and Penicilliums as a non-phytopathogenic fungus. The results obtained showed that not only were the nano/microparticles more effective than Bordeaux mixture in killing phytopathogenic fungi, but also these particles did not have a fungicidal effect on the non-phytopathogenic fungus, Penicillium, which is an advantage of the obtained nano/microparticles.     

Synthesis of silver nanorods and application for die attach material in devices

Silver nanorods have been successfully synthesized in high yield by a polyol process in the presence of FeCl₃. The yield and morphology of the silver particles from these conditions were dependant on the concentration of FeCl₃, and the molar ratio of the capping agent to AgNO₃. The optimized conditions for the synthesis of the nanorods were: 20 μM of FeCl₃ and a molar ratio of 1.8:1 of capping agent to AgNO₃. The nanorods produced were used to form a silver layer at 400 °C with a low electrical resistivity of 6.1 × 10⁻⁶ Ω cm. The silver layer was applied as die-attachment films to connect a SiC chip to a copper substrate. This formed a porous structure, which was evaluated for structure and strength.     

Highly stable,protein capped gold nanoparticles as effective drug delivery vehicles for amino-glycosidic antibiotics

A method for the production of highly stable gold nanoparticles (Au NP) was optimized using sodium borohydride as reducing agent and bovine serum albumin as capping agent. The synthesized nanoparticles were characterized using UV–visible spectroscopy, transmission electron microscopy, X‐ray diffraction (XRD) and dynamic light scattering techniques. The formation of gold nanoparticles was confirmed from the appearance of pink colour and an absorption maximum at 532 nm. These protein capped nanoparticles exhibited excellent stability towards pH modification and electrolyte addition. The produced nanoparticles were found to be spherical in shape, nearly monodispersed and with an average particle size of 7.8 ± 1.7 nm. Crystalline nature of the nanoparticles in face centered cubic structure is confirmed from the selected‐area electron diffraction and XRD patterns. The nanoparticles were functionalized with various amino-glycosidic antibiotics for utilizing them as drug delivery vehicles. Using Fourier transform infrared spectroscopy, the possible functional groups of antibiotics bound to the nanoparticle surface have been examined. These drug loaded nanoparticle solutions were tested for their antibacterial activity against Gram-negative and Gram-positive bacterial strains, by well diffusion assay. The antibiotic conjugated Au NP exhibited enhanced antibacterial activity, compared to pure antibiotic at the same concentration. Being protein capped and highly stable, these gold nanoparticles can act as effective carriers for drugs and might have considerable applications in the field of infection prevention and therapeutics.     

Preparation of highly cross-linked monodispersed functional polystyrene particles by utilizing the delayed addition method

A facile and effective method was successfully developed to prepare the highly cross-linked monodispersed PS particles via soap-free emulsion polymerization, in which the cross-linking agent (DVB) was delayed addition by varying time (Delayed Addition Method, DAM). Through this method, the highly cross-linked monodispersed particles with functional groups on its surface can be prepared. The particles prepared by DAM had a uniform size distribution for the St/DVB and St/HEMA/DVB system. For the St/DVB system, when the cross-linking agent (DVB) was added delay 3 or 7 h, cross-linked PS particles could be successfully prepared without a significant change in the narrow particle size distribution even containing up to 40 wt% of DVB. Similarly, for the St/HEMA/DVB system, by delayed addition of DVB for 3 h, stable and monodispersed polymer particles still could be prepared even the containing of DVB reach to 60 wt%. Moreover, when the feed composition of the DVB kept constant, the longer the delayed addition time of DVB, the better the monodispersity of the cross-linked particles were.