Ligandless Copper‐Catalyzed Coupling of Heteroaryl Bromides with Gaseous Ammonia

A range of different N‐ and S‐containing heterocyclic bromides can be efficiently coupled with gaseous ammonia in the presence of copper(II) acetylacetonate [Cu(acac)₂] as catalyst and in the absence of additional ligands. Unstable aminothiophenes and aminobenzothiophenes can be further reacted in situ to afford functionalized derivatives.     

Remarkable Efficiency Improvement in the Preparation of Insoluble Polymer‐Bound (IPB) Enantioselective Catalytic Systems by the Use of Silicone Chemistry

The use of platinum‐catalyzed hydrosilylation chemistry of silicones greatly simplifies the preparation of bis‐oxazoline (box) ligands covalently bound to an insoluble polymeric support. The use of such immobilized chiral ligands in different copper‐catalyzed asymmetric transformations (carbonyl‐ene, Mukaiyama aldol and olefin cyclopropanation reactions) allows the attainment of high levels of enantioselectivity (91–99 % ee).     

Catalytic Asymmetric 1, 3‐Dipolar Cycloaddition Reaction of Nitrones with α′‐Phosphoric Enones by a Chiral Ligand‐ Copper(II) Triflate Complex

Using the C₂‐symmetric bis‐oxazoline copper(II) catalyst 6f as a chiral Lewis acid, α′‐phosphoric enones 2 undergo 1,3‐dipolar cycloaddition with nitrones 3 to provide isoxazolidines 4 with very high enantioselectivity and endo/exo selectivity.     

Recyclable Copper Catalysts Based on Imidazolium‐Tagged Bis(oxazolines): A Marked Enhancement in Rate and Enantioselectivity for Diels–Alder Reactions in Ionic Liquid

Imidazolium‐tagged bis(oxazolines) have been prepared and used as chiral ligands in the copper(II )‐catalysed Diels–Alder reaction of N‐acryloyl‐ and N‐crotonoyloxazolidinones with cyclopentadiene and 1,3‐cyclohexadiene in the ionic liquid 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethyl)sulfonyl]imide, [emim][NTf₂]. A significant and substantial enhancement in the rate and enantioselectivity was achieved in [emim][NTf₂] compared with dichloromethane. For example, complete conversion and enantioselectivities up to 95 % were obtained for the reaction between N‐acryloyloxazolidinone and cyclopentadiene within 2 min in [emim][NTf₂] whereas the corresponding reaction in dichloromethane required 60 min to reach completion and gave an ee of only 16 %. The enhanced rates obtained in the ionic liquid enabled a catalyst loading as low as 0.5 mol % to give complete conversion within 2 min while retaining the same level of enantioselectivity. The imidazolium‐tagged catalysts can be recycled ten times without any loss in activity or enantioselectivity and showed much higher affinity for the ionic liquid phase during the recycle procedure than the analogous uncharged ligand.     

The Catalytic Diastereo‐ and Enantioselective Claisen Rearrangement of 2‐Alkoxycarbonyl‐Substituted Allyl Vinyl Ether

The catalytic asymmetric Claisen rearrangement of 2‐alkoxycarbonyl‐substituted allyl vinyl ethers that contain two stereogenic double bonds is described. A combination of the highly Lewis acidic [Cu{(S,S)‐tert‐Bu‐box}](H₂O)₂(SbF₆)₂ complex and molecular sieves served as catalyst and afforded the Claisen rearrangement products, substituted and functionalized α‐keto esters, in high yield with a remarkable diastereo‐ and enantioselectivity. The influence of ligand structure, counterion and allyl vinyl ether double bond configuration on the stereoselectivity of the rearrangement was briefly investigated. We propose an explanation for the rate accelerating effect of the Lewis acid as well as a stereochemical model which serve to explain and predict the stereochemical course of the copper bis(oxazoline) catalyzed Claisen rearrangement.     

Ionic Liquid Effect on the Reversal of Configuration for the Magnesium(II) and Copper(II) Bis(oxazoline)‐Catalysed Enantioselective Diels–Alder Reaction

Ionic liquids have been used to support a range of magnesium‐ and copper‐based bis(oxazoline) complexes for the enantioselective Diels–Alder reaction between N‐acryloyloxazolidinone and cyclopentadiene. Compared with reaction performed in dichloromethane or diethyl ether, an enhancement in ee is observed with a large increase in reaction rate. In addition, for non‐sterically hindered bis(oxazoline) ligands, that is, phenyl functionalised ligands, a reversal in configuration is found in the ionic liquid, 1‐ethyl‐3‐methylimidazolium bis[(trifluoromethanesulfonyl)imide], compared with molecular solvents. Supported ionic liquid phase catalysts have also been developed using surface‐modified silica which show good reactivity and enantioselectivity for the case of the magnesium‐based bis(oxazoline) complexes. Poor ees and conversion were observed for the analogous copper‐based systems. Some drop in ee was found on supporting the catalyst due a drop in the rate of reaction and, therefore, an increase in the contribution from the uncatalysed achiral reaction.     

Removal of Copper(II) from a Concentrated Sulphate Medium by Cloud Point Extraction Using an N,N′-Bis(salicylaldehyde)Ethylenediimine Di-Schiff Base Chelating Ligand

Various chelating ligands have been investigated for the cloud point extraction of several metal ions. However, limited studies on the use of the Schiff base ligands have been reported. In this work, cloud point extraction behavior of copper(II) with N,N′‐bis(salicylaldehyde)Ethylenediimine Schiff base chelating ligand, (H₂SALEN), was investigated in aqueous concentrated sulphate medium. The extraction process used is based on the formation of hydrophobic H₂SALEN–copper(II) complexes that are solubilized in the micellar phase of a non‐ionic surfactant, i.e. ethoxylated (9.5EO) tert‐butylphenol. The copper(II) complexes are then extracted into the surfactant‐rich phase above cloud point temperature. Different parameters affecting the extraction process of Cu(II), such as equilibrium pH, extractant concentration, and non‐ionic surfactant concentration were explored. The extraction of Cu(II) was studied in the pH range of 2–11. The results obtained showed that it was profoundly influenced by the pH of the aqueous medium. The concentration factor, C_f, of about 17 with extraction efficiency of E % ≈100 was achieved. The stoichiometry of the extracted complex of copper(II) was ascertained by the Yoe–Jones method to give a composition of 1:1 (Cu:H₂L). The optimum conditions of the extraction‐removal have been established as the following: (1) 1.86 × 10^?3 mol/L ligand; (2) 3 wt% surfactant; (3) pH of 8 (4) 0.5 mol/L Na₂SO₄ and (5) temperature of 60 °C.     

Insights into Supported Copper(II)‐Catalyzed Azide‐Alkyne Cycloaddition in Water

Cross‐linked polymeric ionic liquid material‐supported copper (Cu‐CPSIL), imidazolium‐loaded Merrifield resin‐supported copper (Cu‐PSIL) and silica dispersed CuO (CuO/SiO₂), were prepared and proved to be efficient catalysts for the one‐pot synthesis of 1,4‐disubsituted‐1,2,3‐triazoles by the reaction of alkyl halides with sodium azide and terminal alkynes in water at room temperature. Moreover, these supported copper catalysts were recovered quantitatively from the reaction mixture by simple filtration and reused for five consecutive recycles without significant loss of catalytic activity. Among the three immobilized copper catalysts, Cu‐CPSIL exhibited excellent catalytic activity for the reaction of aliphatic bromides, sodium azide and terminal alkynes. The differences in the catalytic performances of the catalysts could be ascribed to the copper dispersion and the interaction between copper and the supports. In addition, water was used as the reaction media and the proton provider, the latter was found to be very important for the reaction. The XPS results suggested that the supported Cu(II) catalysts were reduced to catalytic Cu(I) species via alkynes homocoupling reaction. By means of IR and ESI‐MS studies, a possible mechanism of cycloaddition based on the reduction of Cu(II) to Cu(I) species was proposed.     

Synthesis, structural characterization and microbial activities of mixed ligand copper(II) complexes of 2,2′-bipyridine and acetylacetonate

Two new mixed ligand complexes of copper(II) with acetylacetonate (acac) and 2,2′-bipyridine (bpy) belonging to the class of cytotoxic and antineoplastic compounds known as CASIOPEINAS® have been synthesized and characterized on the basis of analytical and spectroscopic data. Molecular structures of the complexes, [Cu(acac)(bpy)Cl][Cu(acac)(bpy)(H₂O]Cl.H₂O and [Cu(acac)(bpy)Br]H₂O, were established by single crystal X-ray study. The Cu(II) ion in both the complexes exhibited square pyramidal geometry with acac and bpy in the equatorial plane and halide/water in the axial position. Interestingly, for the complex with chloride anion, two types of complexes with chloride and water at the axial positions were derived from the same reaction and co-crystallized in the asymmetric unit with strong intermolecular interactions. Microbial property of these two complexes as antibacterial and antifungal agents has been investigated and some of the results are comparable to that of the standard drugs such as E. coli, P. aeruginosa, S. aureus, S. pyogenes, A. niger and C. albicans, used in this study.     

Polymer‐Bound Pyridine‐Bis(oxazoline). Preparation through Click Chemistry and Evaluation in Asymmetric Catalysis

A pyridine‐bis(oxazoline) ligand was efficiently immobilized by copper(I)‐catalyzed azide‐alkyne cycloaddition onto a polystyrene resin. The so obtained click‐pybox resin 1a was associated with various metal salts (YbCl₃, LuCl₃, CuOTf) and the resulting resin‐bound catalysts were explored in ring‐opening of cyclohexene oxide, silylcyanation of benzaldehyde and alkynylation of imines. These new polymer‐supported catalysts exhibit good to excellent performances in terms of catalytic activity, enantioselectivity and recyclability.     

Chiral Bis(N‐arylamino)phosphine‐oxazolines: Synthesis and Application in Asymmetric Catalysis

N‐Arylation or N‐alkylation of chiral 1,2‐diamines followed by ring closure with phosphorus trichloride (PCl₃) and subsequent coupling with an oxazoline alcohol resulted in a new class of N,P ligands. The corresponding iridium tetrakis[3,5‐bis(trifluormethyl)phenyl]borate (BAr_F) complexes were found to be efficient catalysts for the enantioselective hydrogenation of unfunctionalized olefins and α,β‐unsaturated carboxylic esters.     

Geminal Bis(sulfoximine)s: Synthesis and Applications in Asymmetric Catalysis

A number of C₂‐symmetrical geminal bis(sulfoximine)s have been prepared for the first time and used as ligands in boron‐mediated reductions of acetophenone and copper complex‐catalyzed 1,4‐additions of diethylzinc to 2‐cyclohexenone. The copper complex of bis(sulfoximine) 46 was found to be highly active in this type of reaction, furnishing the addition product in nearly quantitative yield even at −90 °C. From the reaction of bis(sulfoximine) 42 with Cu(OTf)₂ a copper complex was isolated and characterized by X‐ray structural analysis. A mixture of SES‐Cl and NaN₃ in acetonitrile was found to behave like SES‐N₃ in FeCl₂‐mediated iminations of sulfoxides, affording the corresponding sulfoximines with complete retention of the sulfur configuration.     

Rhodium Acetate Dimer Immobilized in 1‐Butyl‐3‐methylimidazolium Hexafluorophosphate Ionic Liquid: a Novel and Recyclable Catalytic System for the Cyclopropanation of Alkenes

Alkenes undergo smooth cyclopropanation with ethyl diazoacetate using a catalytic amount of rhodium acetate dimer, Rh₂(OAc)₄, immobilized in the air‐ and moisture‐stable 1‐butyl‐3‐methylimidazolium hexafluorophosphate ionic liquid, [bmim]PF₆, to afford cyclopropanecarboxylates in excellent yields with high trans‐selectivity. The recovery of the catalyst is facilitated by the hydrophobic nature of [bmim]PF₆. The recovered ionic liquid containing Rh₂(OAc)₄ can be reused for three to five subsequent runs with only a gradual decrease in activity.     

Ionic liquid promoted an improved synthesis of 3,4-dihydropyrimidinones using [bmim]BF4 immobilized Cu (II) acetylacetonate as recyclable catalytic system

An improved method for the synthesis of 3,4-dihydropyrimidinones by one pot cyclocondensation of aldehyde, β-dicarbonyl compound and urea with significant enhancement in reaction rates using room temperature ionic liquid [bmim] BF₄ immobilized Cu(acac)₂ as recyclable catalytic system is described.     

Catalytic Asymmetric Heterogeneous Aziridination Using CuHY/bis(oxazoline): Effect of Reaction Conditions on Enantioselectivity

The copper-catalyzed aziridination of styrene with copper-exchanged zeolite HY (CuHY) and copper(II) triflate (trifluoromethanesulfonate) (Cu(OTf)₂) as catalysts is described using N-(p-tolylsulfonyl)imino]phenyliodinane (PhI=NTs) as the nitrene donor. The effects on the ee and yield of the aziridine when the catalyst is modified by the presence of a chiral bis(oxazoline) are investigated in detail. The heterogeneously catalyzed reaction under these conditions shows a slight, but significant, enhancement in ee with increasing conversion at 25 °C. This is not observed in the more rapid homogeneously catalyzed reaction under identical reaction conditions using PhINTs as the nitrene donor. The enhancement in ee is proposed to result from the preferential reaction of the (S)-aziridine with the Cu²⁺:bis(oxazoline) complex in the presence of PhI=NTs, leading to an enhancement of the (R)-aziridine in the remaining aziridine product.     

Synthesis,Characterization, and Antimicrobial Activity of Silver(I) and Copper(II) Complexes of Phosphate Derivatives of Pyridine And Benzimidazole

Two silver(I) complexes—{[Ag(4‐pmOpe)]NO₃}_n and [Ag(2‐bimOpe)₂]NO₃—and three copper(II) complexes—[Cu₄Cl₆O(2‐bimOpe)₄], [CuCl₂(4‐pmOpe)₂], and [CuCl₂(2‐bis(pm)Ope]—were synthesized by reaction of silver(I) nitrate or copper(II) chloride with phosphate derivatives of pyridine and benzimidazole, namely diethyl (pyridin‐4‐ylmethyl)phosphate (4‐pmOpe), 1H‐benzimidazol‐2‐ylmethyl diethyl phosphate (2‐bimOpe), and ethyl bis(pyridin‐2‐ylmethyl)phosphate (2‐bis(pm)Ope). These compounds were characterized by ¹H, ¹³C, and ³¹P NMR as well as IR spectroscopy, elemental analysis, and ESIMS spectrometry. Additionally, molecular and crystal structures of {[Ag(4‐pmOpe)]NO₃}_n and [Cu₄Cl₆O(2‐bimOpe)₄] were determined by single‐crystal X‐ray diffraction analysis. The antimicrobial profiles of synthesized complexes and free ligands against test organisms from the ATCC and clinical sources were determined. Silver(I) complexes showed good antimicrobial activities against Candida albicans strains (MIC values of ～19 μM ). [Ag(2‐bimOpe)₂]NO₃ was particularly active against Pseudomonas aeruginosa and methicillin‐resistant Staphylococcus epidermidis, with MIC values of ～5 and ～10 μM , respectively. Neither copper(II) complexes nor the free ligands inhibited the growth of test organisms at concentrations below 500 μg mL^?1.     

The Catalytic Asymmetric Addition of Diethylzinc to N‐(Diphenylphosphinoyl) Imines Catalyzed by Cu(OTf)2‐Chiral N‐(Binaphthyl‐2‐yl)thiophosphoramide Ligands

Chiral N‐(binaphthyl‐2‐yl)thiophosphoramide L7 [O,O‐diethyl 2′‐(ethylamino)‐1,1′‐binaphthyl‐2‐ylamidothiophosphate] prepared from the reaction of diethyl chlorothiophosphate with (R)‐(+)‐N‐ethyl‐1,1′‐binaphthyl‐2,2′‐diamine was used as a catalytic chiral ligand in the first Cu(OTf)₂‐promoted catalytic asymmetric addition of diethylzinc to N‐(diphenylphosphinoyl) imines in which ~85% ee can be realized.     

Excess Phosphine Ligand Plays a Critical Role in the Asymmetric Copper(I) Iodide‐Catalyzed Conjugate Addition of Grignard Reagents to α,β‐Unsaturated Esters

The role of excess ligand in the asymmetric 1,4‐conjugate addition (ACA) of Grignard reagents to α,β‐unsaturated esters compounds catalyzed by copper(I) iodide‐2,2′‐bis(di‐p‐tolylphosphino)‐1,1′‐binaphthyl (CuI‐Tol‐BINAP) is explored herein. In addition, this methodology allows asymmetric induction to be carried out using a non‐chiral phosphine copper complex with excess of a chiral phosphine ligand.     

The preparation of α‐bis and α,ω‐tetrakis aromatic oxazolyl‐ and carboxyl‐functionalized polymers using 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene in atom transfer radical polymerization reactions

The preparation of new compounds, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethanol and a new symmetrically disubstituted 1,1‐diphenylethylene derivative, 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene, is described. 1,1‐Bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene was utilized as a dioxazolyl initiator precursor for the polymerization of styrene by atom transfer radical polymerization (ATRP) methods to produce α‐bis(oxazolyl) polystyrene. The kinetic study of the polymerization process indicated that the free radical polymerization reaction for the preparation of α‐bis(oxazolyl) polystyrene follows first‐order rate kinetics with respect to monomer consumption. α,ω‐Tetrakis(oxazolyl) polystyrene was prepared by a new, in situ, controlled/living, post‐ATRP chain‐end‐functionalization reaction which involves the direct addition of 1,1‐bis[4‐(2‐(4,4‐dimethyl‐1,3‐oxazolyl))phenyl]ethylene to the ω‐terminus of the α‐bis(oxazolyl) polystyrene derivative, without the isolation and purification of the polymeric precursor. α‐Bis(carboxyl) and α,ω‐tetrakis(carboxyl) polystyrene derivatives were obtained by the quantitative chemical transformation of the oxazoline groups of the respective aromatic oxazolyl chain‐end‐functionalized polystyrene derivatives to the aromatic carboxyl groups. The organic precursor compounds, the dioxazolyl‐functionalized 1,1‐diphenylethylene derivative and the functionalized polymers were characterized using ¹H NMR and ¹³C NMR spectrometry and Fourier transform infrared spectroscopy, size‐exclusion and thin‐layer chromatography and non‐aqueous titration measurements. © 2014 Society of Chemical Industry     

Aerobic Oxidation of Benzylic Alcohols in Water by 2,2,6,6‐Tetramethylpiperidine‐1‐oxyl (TEMPO)/Copper(II) 2‐N‐Arylpyrrolecarbaldimino Complexes

Novel copper(II) 2‐N‐arylpyrrolecarbaldimine‐based catalysts for the aerobic oxidation of benzylic alcohols mediated by the 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) radical are reported. The catalytic activity for both synthesized and in situ made complexes in alkaline water solutions was studied revealing high efficiency and selectivity (according to GC selectivity always >99%) for both of these catalytic systems. For example, quantitative conversion of benzyl alcohol to benzaldehyde can be achieved with the in situ prepared bis[2‐N‐(4‐fluorophenyl)‐pyrrolylcarbaldimide]copper(II) catalysts in 2 h with atmospheric pressure of O₂ at 80 °C. Interestingly, these catalysts can utilize dioxygen as well as air or hydrogen peroxide as the end oxidants, producing water as the only by‐product.