MOSFET design for forward body biasing scheme

Forward body biasing is a solution for continued scaling of bulk-Si CMOS technology. In this letter, the dependence of 30-nm-gate MOSFET performance on body bias is experimentally evaluated for devices with various channel-doping profiles to provide guidance for channel engineering in a forward body-biasing scheme. Furthermore, simulations of 10-nm-gate CMOS (hp22-nm node) devices are performed to study the optimal channel-doping profile and gate work function engineering for a forward biasing scheme.     

High Transconductance MISFET With a Single InAs Nanowire Channel

Metal-insulator field-effect transistors (FETs) are fabricated using a single n-InAs nanowire (NW) with a diameter of d = 50 nm as a channel and a silicon nitride gate dielectric. The gate length and dielectric scaling behavior is experimentally studied by means of dc output- and transfer-characteristics and is modeled using the long-channel MOSFET equations. The device properties are studied for an insulating layer thickness of 20-90 nm, while the gate length is varied from 1 to 5 mum. The InAs NW FETs exhibit an excellent saturation behavior and best breakdown voltage values of V _BR > 3 V. The channel current divided by diameter d of an NW reaches 3 A/mm. A maximum normalized transconductance g_m /d > 2 S/mm at room temperature is routinely measured for devices with a gate length of les 2 mum and a gate dielectric layer thickness of les 30 nm.     

A simple analytical model of counter doping in a uniformly and heavily doped channel region of MOSFETS

We analyze counter doping into a heavily and uniformly doped channel MOSFET region, which enabled us to suppress short channel effects with a proper threshold voltage V_th. We derive a model for the relation between the counter doping conditions and V_th and verify its validity with numerical and experimental data. We show that V_th is determined by the centroid, R_p, and dose, Φ_D, of the counter doping and that V_th is independent of the straggle ΔR_p. We show that R_p is almost invariable while (ΔR_p² + 2Dt) is smaller than R_p0², where R_p0 is the initial R_p which is the projected range of ion implantation, D is the diffusion coefficient of the counter doped impurities, and t is the annealing time. Using this technology we can expect superb short channel immunity with a reduced threshold voltage suitable for deep submicron gate length devices, which is shown from numerical analysis.     

Lateral and Vertical Scaling of $hbox{In}_{0.7} hbox{Ga}_{0.3}hbox{As}$ HEMTs for Post-Si-CMOS Logic Applications

In this paper, we have experimentally investigated the impact of lateral and vertical scaling of In_0.7Ga_0.3As high-electron-mobility transistors (HEMTs) onto their logic performance. We have found that reducing the In_0.52Al_0.48As insulator thickness results in much better electrostatic integrity and improved short-channel behavior down to a gate length of around 60 nm. Our nearly enhancement-mode 60-nm HEMTs feature V_T = -0.02 V, DIBL = 93 mV/V, S = 88 mV/V, and I_ON/I_OFF = 1.6 times10⁴, at V _DD = 0.5 V. We also estimate a gate delay of CV/I = 1.6 ps at V_DD = 0.5 V. We have benchmarked these devices against state-of-the-art Si CMOS. For the same leakage current, which includes the gate leakage current, the InGaAs HEMTs exhibit 1.2times more current drive (I_ON) than the state-of-the-art 65-nm low-power CMOS technology at V _DD = 0.5 V.     

Optimal Dual-$V_{T}$ Design in Sub-100-nm PD/SOI and Double-Gate Technologies

Dual-threshold-voltage (V_T) CMOS is an effective way to reduce leakage power in high-performance very-large-scale-integration circuits. In this paper, we explore the technology design space for dual-threshold-voltage transistor design in deep-sub-100-nm technology nodes. We propose a technique of achieving high-V_T (HVT) devices using thicker gate-sidewall offset spacers to increase the channel length without increasing the printed-gate length. The effectiveness of all the dual-V_T technology options-increasing channel doping, increasing gate length, and proposed technique of increasing spacer thickness-is analyzed at transistor and basic logic gate level. Results on 65-nm partially depleted silicon-on-insulator and double-gate technologies indicate that the proposed technique yields lower dynamic power consumption and lower performance penalty compared with longer gate length and high body-doping devices. Our proposed technique, however, incurs extra fabrication mask similar to achieving HVT by increasing body doping.     

Sub-50 nm P-channel FinFET

High-performance PMOSFETs with sub-50-nm gate-length are reported. A self-aligned double-gate MOSFET structure (FinFET) is used to suppress the short-channel effects. This vertical double-gate SOI MOSFET features: 1) a transistor channel which is formed on the vertical surfaces of an ultrathin Si fin and controlled by gate electrodes formed on both sides of the fin; 2) two gates which are self-aligned to each other and to the source/drain (S/D) regions; 3) raised S/D regions; and 4) a short (50 nm) Si fin to maintain quasi-planar topology for ease of fabrication. The 45-nm gate-length p-channel FinFET showed an I_dsat of 820 μA/μm at V_ds=V_gs=1.2 V and T _ox=2.5 mm. Devices showed good performance down to a gate-length of 18 nm. Excellent short-channel behavior was observed. The fin thickness (corresponding to twice the body thickness) is found to be critical for suppressing the short-channel effects. Simulations indicate that the FinFET structure can work down to 10 nm gate length. Thus, the FinFET is a very promising structure for scaling CMOS beyond 50 nm     

Study of Random-Dopant-Fluctuation (RDF) Effects for the Trigate Bulk MOSFET

A study of random-dopant-fluctuation (RDF) effects on the trigate bulk MOSFET versus the planar bulk MOSFET is performed via atomistic 3D device simulation for devices with a 20 nm gate length. For identical nominal body and source/drain doping profiles and layout width, the trigate bulk MOSFET shows less threshold voltage (V_th) lowering and variation. RDF effects are found to be caused primarily by body RDF. The trigate bulk MOSFET offers a new method of V_TH adjustment, via tuning of the retrograde body doping depth, to mitigate tradeoffs in V_TH variation and short-channel effect control.     

high-performance and high-reliability 80-nm gate-length DTMOS with indium super steep retrograde channel

In this paper, we demonstrate for the first time a high-performance and high-reliability 80-nm gate-length dynamic threshold voltage MOSFET (DTMOS) using indium super steep retrograde channel implantation. Due to the steep indium super steep retrograde (In SSR) dopant profile in the channel depletion region, the novel In-SSR DTMOS features a low V/sub th/ in the off-state suitable for low-voltage operation and a large body effect to fully exploit the DTMOS advantage simultaneously, which is not possible with conventional DTMOS. As a result, excellent 80-nm gate length transistor characteristics with drive current as high as 348 /spl mu/A//spl mu/m (off-state current 40 nA//spl mu/m), a record-high Gm=1022 mS/mm, and a subthreshold slope of 74 mV/dec, are achieved at 0.7 V operation. Moreover, the reduced body effects that have seriously undermined conventional DTMOS operation in narrow-width devices are alleviated in the In-SSR DTMOS, due to reduced indium dopant segregation. Finally, it was found for the first time that hot-carrier reliability is also improved in DTMOS-mode operation, especially for In-SSR DTMOS.     

An assessment of single-electron effects in multiple-gate SOI MOSFETs with 1.6-nm gate oxide near room temperature

This letter provides an assessment of single-electron effects in ultrashort multiple-gate silicon-on-insulator (SOI) MOSFETs with 1.6-nm gate oxide. Coulomb blockade oscillations have been observed at room temperature for gate bias as low as 0.2 V. The charging energy, which is about 17 meV for devices with 30-nm gate length, may be modulated by the gate geometry. The multiple-gate SOI MOSFET, with its main advantage in the suppression of short-channel effects for CMOS scaling, presents a very promising scheme to build room-temperature single-electron transistors with standard silicon nanoelectronics process.     

MOSFET hot-carrier reliability improvement by forward-body bias

Active threshold voltage V/sub TH/ control via well-substrate biasing can be utilized to satisfy International Roadmap for Semiconductors performance and standby power requirements for CMOS technology beyond the hp65-nm node. In this letter, the impact of substrate bias V/sub SUB/ on hot-carrier reliability is presented. The impact varies with the gate length and body effect factor. These findings are explained, and the effects of future scaling are discussed using a quasi-two-dimensional model. Significant and important improvement in hot-carrier lifetime with forward-bias V/sub SUB/ can be expected for deeply scaled CMOS devices, making it an attractive method for extending the scalability of bulk-Si transistor technology.     

Sub-100-nm vertical MOSFET with threshold voltage adjustment

Sub-100-nm vertical MOSFET has been developed for fabrication with low cost processing. This is the first vertical MOSFET design that combines 1) a vertical L_DD structure processed with implantation and diffusion steps, 2) high-pressure oxide growing at source/drain (S/D) regions to reduce the gate overlapped capacitances, and 3) threshold voltage adjustment with a doped APCVD film. The drive current per unit channel width and S/D punch-through voltage are higher than that of previously published vertical MOSFETs. Fabrication processes are well established, and equipment of the 1 μm CMOS generation can be used to fabricate sub-100-nm channel length MOSFETs with good electrical characteristics and high performance     

Damascene W/TiN gate MOSFETs with improved performance for 0.1-/spl mu/m regime

W/TiN gate CMOS technologies with improved performance were investigated using a damascene metal gate process. 0.1-/spl mu/m W/TiN stacked gate CMOS devices with high performance and good driving ability were fabricated successfully by optimizing the W/TiN stacked gate structure, improving the W/TiN gate electrode sputtering technology, and reducing W/TiN stacked gate MOSFET surface states and threshold voltages. A super steep retrograde (SSR) channel doping with heavy ion implantation, /sup 115/In/sup +/ for NMOS and /sup 121/Sb/sup +/ for PMOS, was applied here to obtain a reasonably lower threshold voltage and to suppress short-channel effects (SCEs). Non-CMP technology, used to replace CMP during the damascene metal gate process, was also explored. The propagation delay time of 57 stage W/TiN gate CMOS ring oscillators was 13 ps/stage at 3 V and 25 ps/stage at 1.5 V, respectively. Better performance would be achieved by using Co/Ti salicide source/drain (S/D) and thinner gate dielectrics.     

Ultrathin-body SOI MOSFET for deep-sub-tenth micron era

A 40-nm-gate-length ultrathin-body (UTB) nMOSFET is presented with 20-nm body thickness and 2.4-nm gate oxide. The UTB structure eliminates leakage paths and is an extension of a conventional SOI MOSFET for deep-sub-tenth micron CMOS. Simulation shows that the UTB SOI MOSFET can be scaled down to 18-nm gate length with <5 nm UTB. A raised poly-Si S/D process is employed to reduce the parasitic series resistance     

Effect of Channel Width Shortening on the Stability of a-Si:H/nc-Si:H Bilayer Thin-Film Transistors

The static bias-stress-induced degradation of hydrogenated amorphous/nanocrystalline silicon bilayer bottom-gate thin-film transistors is investigated by monitoring the turn-on voltage (V _on) and on-state current (I _on) in the linear region of operation. Devices of constant channel length 10 mum and channel width varying from 3 to 400 mum are compared. The experimental results demonstrate that the device degradation is channel-width dependent. In wide channel devices, substantial degradation of V _on is observed, attributed to electron injection into the gate dielectric, followed by I _on reduction due to carrier scattering by the stress-induced gate insulator trapped charge. With shrinking the channel width down to 3 mum, the device stability is substantially improved due to the possible reduction of the electron thermal velocity during stress or due to the gate insulator quality uniformity over small dimensions.     

SODEL FET: novel channel and source/drain profile engineering schemes by selective Si epitaxial growth technology

In this paper, novel channel and source/drain profile engineering schemes are proposed for sub-50-nm bulk CMOS applications. This device, referred to as the silicon-on-depletion layer FET (SODEL FET), has the depletion layer beneath the channel region, which works as an insulator like a buried oxide in a silicon-on-insulator MOSFET. Thanks to this channel structure, junction capacitance (C/sub j/) has been reduced in SODEL FET, i.e., C/sub j/ (area) was /spl sim/0.73 fF//spl mu/m/sup 2/ both in SODEL nFET and pFET at Vbias =0.0 V. The body effect coefficient /spl gamma/ is also reduced to less than 0.02 V/sup 1/2/. Nevertheless, current drives of 886 /spl mu/A//spl mu/m (I/sub off/=15 nA//spl mu/m) in nFET and -320 /spl mu/A//spl mu/m (I/sub off/=10 nA//spl mu/m) in pFET have been achieved in 70-nm gate length SODEL CMOS with |V/sub dd/|=1.2 V. New circuit design schemes are also proposed for high-performance and low-power CMOS applications using the combination of SODEL FETs and bulk FETs on the same chip for 90-nm-node generation and beyond.     

Efficiency of body biasing in 90-nm CMOS for low-power digital circuits

The efficiency of body biasing for leakage reduction and performance improvement in a 90-nm CMOS low-power technology with triple-well option is evaluated. Static measurements of single devices and dynamic measurements of ring oscillators and 32-b parallel prefix adders are presented. Whereas forward biasing still provides a significant performance improvement of up to 37% for low-leakage devices with 2.2-nm gate oxide thickness, the application of reverse biasing to reduce subthreshold leakage currents is inefficient due to additional leakage currents such as gate leakage and gate-induced drain leakage. Experimental results confirm that, in 90-nm CMOS circuits, the efficiency of body biasing strongly depends on the device type and operating temperature. Moreover, the impact of the zero-temperature coefficient point on static device and dynamic circuit performance is investigated.     

Performance Enhancements in Scaled Strained-SiGe pMOSFETs With $ hbox{HfSiO}_{x}/hbox{TiSiN}$ Gate Stacks

The short-channel performance of compressively strained Si_0.77Ge_0.23 pMOSFETs with HfSiOx/TiSiN gate stacks has been characterized alongside that of unstrained-Si pMOSFETs. Strained-SiGe devices exhibit 80% mobility enhancement compared with Si control devices at an effective vertical field of 1 MV middotcm^-1. For the first time, the on-state drain-current enhancement of intrinsic strained-SiGe devices is shown to be approximately constant with scaling. Intrinsic strained-SiGe devices with 100-nm gate lengths exhibit 75% enhancement in maximum transconductance compared with Si control devices, using only ~20% Ge (~0.8% strain). The origin of the loss in performance enhancement commonly observed in strained-SiGe devices at short gate lengths is examined and found to be dominated by reduced boron diffusivity and increased parasitic series resistance in compressively strained SiGe devices compared with silicon control devices. The effective channel length was extracted from I- V measurements and was found to be 40% smaller in 100-nm silicon control devices than in SiGe devices having the same lithographic gate lengths, which is in good agreement with the metallurgical channel length predicted by TCAD process simulations. Self-heating due to the low thermal conductivity of SiGe is shown to have a negligible effect on the scaled-device performance. These findings demonstrate that the significant on-state performance gains of strained-SiGe pMOSFETs compared with bulk Si devices observed at long channel lengths are also obtainable in scaled devices if dopant diffusion, silicidation, and contact modules can be optimized for SiGe.     

CMOS fully compatible microwave detector based on MOSFET operating in resistive regime

A microwave detector featuring full compatibility with standard CMOS process is presented. It is based on the channel resistance nonlinearity of a MOSFET operating in ohmic regime. The detecting sensitivity is shown to be tuned to below mW power by properly setting the bias voltage of the gate and of the drain of the transistor. Experiments with 180-nm gate length transistor have confirmed detecting operation up to 34GHz. The absence of additional technological steps required for the detector fabrication with respect to a standard CMOS process opens the realm of RF monitoring in products at virtually no cost.     

A novel nanoscaled device concept: quasi-SOI MOSFET to eliminate the potential weaknesses of UTB SOI MOSFET

For the first time, a novel device concept of a quasi-silicon-on-insulator (SOI) MOSFET is proposed to eliminate the potential weaknesses of ultrathin body (UTB) SOI MOSFET for CMOS scaling toward the 35-nm gate length, and beyond. A scheme for fabrication of a quasi-SOI MOSFET is presented. The key characteristics of quasi-SOI are investigated by an extensive simulation study comparing them with UTB SOI MOSFET. The short-channel effects can be effectively suppressed by the insulator surrounding the source/drain regions, and the suppression capability can be even better than the UTB SOI MOSFET, due to the reduction of the electric flux in the buried layer. The self-heating effect, speed performance, and electronic characteristics of quasi-SOI MOSFET with the physical channel length of 35 nm are comprehensively studied. When compared to the UTB SOI MOSFET, the proposed device structure has better scaling capability. Finally, the design guideline and the optimal regions of quasi-SOI MOSFET are discussed.     

Overview and status of metal S/D Schottky-barrier MOSFET technology

In this paper, the metal source/drain (S/D) Schottky-barrier (SB) MOSFET technology is reviewed. The technology offers several benefits that enable scaling to sub-30-nm gate lengths including extremely low parasitic S/D resistance (1% of the total device resistance), atomically abrupt junctions that enable the physical scaling of the device to sub-10-nm gate lengths, superior control of OFF-state leakage current due to the intrinsic Schottky potential barrier, and elimination of parasitic bipolar action. These and other benefits accrue using a low-thermal-budget CMOS manufacturing process requiring two fewer masks than conventional bulk CMOS. The SB-CMOS manufacturing process enables integration of critical new materials such as high-k gate insulators and strained silicon substrates. SB MOSFET technology state of the art is also reviewed, and shown to be focused on barrier-height-lowering techniques that use interfacial layers between the metal S/Ds and the channel region. SB-PMOS devices tend to have superior performance compared to NMOS, but NMOS performance has recently improved by using ytterbium silicide or by using hybrid structures that incorporate interfacial layers to lower the SB height.