Synthesis and study of the structure,magnetic, optical and methane gas sensing properties of cobalt doped zinc oxide microstructures

Undoped and Cobalt (Co) doped zinc oxide (ZnO & CZx) nanoparticles were synthesized by Solvothermal method. The samples were studied by X-Ray Diffraction (XRD), Energy Dispersive X-ray Spectroscopy (EDS), Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), UV–Vis spectroscopy and Scanning and Transmission Electron Microscopy (SEM & TEM). Moreover the gas sensing properties of the nanoparticles for methane gas took place. Purity of the samples and Co concentration was investigated by EDS and ICP spectroscopy respectively. XRD results described the hexagonal wurtzite structure for all the samples in which crystallinity and the crystallites size decreased with increase of Co doping level. Using UV–Vis spectroscopy the band gap energy was evaluated and redshift of band gap energy was observed by increasing of Co concentration. SEM images demonstrated that nanoparticles were agglomerated with increase of Co doping level. TEM images revealed the nanoparticles size in the range 11–44 nm. Methane sensing properties was enhanced after Co doping of the ZnO nanoparticles for Co concentration up to 4%.     

Synthesis,characterization and studies on optical properties of hierarchical ZnO–CdS nanocomposites

Cadmium sulfide coated zinc oxide hierarchical nanocomposites have been synthesised at room temperature by a simple solution based method. CdS nanoparticles were deposited on the surface of ZnO without using any surfactant, ligand or chelating agents. The nanocomposites were synthesised using different concentrations of thioacetamide, cadmium salts, and also by varying the reaction time. After characterization of the nanocomposites, optical properties were investigated by UV–visible diffuse reflectance and photoluminescence spectroscopy techniques. It was found that band gap of the ZnO–CdS nanocomposites is tunable between 2.42 and 3.17 eV.     

Structural and optoelectronic characterization of prepared and Sb doped ZnO nanoparticles

This paper briefly reports the structural and optoelectronics properties of prepared pure and Sb doped ZnO nanoparticles. Doping with suitable elements offers an efficient method to control and enhance the optical properties of ZnO nanoparticles, which is essential for various optoelectronics applications. Sb doped ZnO nanoparticles have significant concern due to their unique and unusual electrical and optical properties. In the present work, we report the synthesis of Sb doped ZnO successfully with average particle size range from 26 to 29 nm via direct precipitation method. The phase purity and crystallite size of synthesized ZnO and Sb doped nano-sized particles were characterized and examined via X-ray diffraction (XRD) and scanning electron microscopy (SEM). The elemental analyses of undoped and doped ZnO nanoparticles were examined by using energy-dispersive X-ray spectroscopy (EDAX).We investigated and measured the optoelectronics properties of synthesized ZnO and Sb doped ZnO nanoparticles by employing photoluminescence and UV–Visible spectroscopy. The influence of Sb doping on photoluminescence (PL) spectra of ZnO nanoparticles, which consists of UV emission and broad visible emission band, is found to be strongly dependent upon the Sb concentration for all the Sb doped ZnO nanoparticles samples under investigation. The UV–Visible absorption study shows an increase in band gap energy as Sb is incorporated on the ZnO nanoparticles.     

Structure and optical properties of ZnO:V thin films with different doping concentrations

A series of ZnO thin films doped with various vanadium concentrations were prepared on glass substrates by direct current reactive magnetron sputtering. The results of the X-ray diffraction (XRD) show that the films with doping concentration less than 10 at.% have a wurtzite structure and grow mainly along the c-axis orientation. The residual stress, estimated by fitting the XRD diffraction peaks, increases with the doping concentration and the grain size also has been calculated from the XRD results, decreases with increasing the doping concentration. The surface morphology of the ZnO:V thin films was examined by SEM. The optical constants (refractive index and extinction coefficient) and the film thickness have been obtained by fitting the transmittance. The optical band gap changed from 3.12 eV to 3.60 eV as doping concentration increased from 1.8 at.% to 13 at.% mol. All the results have been discussed in relation with doping concentration.     

Morphology controlled synthesis of ZnO nanostructures by varying pH

ZnO nanostructures have been synthesized in a controlled manner by varying the pH of the precursor solution using hydrothermal technique. The morphological changes of the prepared ZnO nanostructures have been investigated in the range of pH 5–10. Radial hexagonal rod-like shape is formed at lower pH values of 5 and 6 whereas, flower-like shape is obtained for higher pH values of 9 and 10. Flake-like structure is observed at moderate pH of 8. The prepared ZnO nanostructures have been characterized using X-ray diffraction technique (XRD), energy dispersive X-ray analysis, scanning electron microscope and FTIR spectroscopy. XRD results show that the prepared ZnO nanostructures exhibit hexagonal wurtzite structure. The growth mechanism suggests that the supersaturation of the precursor results in various nucleation habits, which induce the formation of ZnO nanostructures with different morphologies. UV–Vis spectroscopy and photoluminescence were applied to study the optical properties. The photoluminescence spectrum demonstrated two emission bands, a near band edge emission in the UV region and a strong deep band emission in the visible region. The change in pH from 5 to 10 results in band gap variations of 3.47–3.97 eV and blue-shift in the peak emission of visible PL from 560 to 460 nm.     

Investigation on structural,optical and dielectric properties of Co doped ZnO nanoparticles synthesized by gel-combustion route

We report the synthesis of Co doped ZnO nanoparticles by combustion method using citric acid as a fuel for 0%, 1%, 3%, 5% and 10% of Co doping. The structural, optical and dielectric properties of the samples were studied. Crystallite sizes were obtained from the X-ray diffraction (XRD) patterns whose values are decreasing with increase in Co content up to 5%. The XRD analysis also ensures that ZnO has a hexagonal (wurtzite) crystal structure and Co²⁺ ions were successfully incorporated into the lattice positions of Zn²⁺ ions. The TEM image shows the average particle size in the range of 10–20 nm for 3% Co doped ZnO nanoparticles. The energy band gap as obtained from the UV–visible spectrophotometer was found gradually increasing up to 5% of Co doping. The dielectric constants (?′, ?″), dielectric loss (tan δ) and ac conductivity (σ_ac) were studied as the function of frequency and composition, which have been explained by ‘Maxwell Wagner Model’.     

Synthesis and characterization of silver/thiophene nanocomposites by UV-irradiation method

Silver/thiophene (Ag/Th) nanocomposites have been prepared by UV-irradiation method. The resulting products were characterized by Elemental Analysis (EA), X-ray Photoelectron Spectroscopy (XPS), optical absorption spectroscopy, Fourier Transform Infrared (FT-IR), Thermal Gravimetric Analysis (TGA), X-ray Diffraction (XRD), transmission electron microscopy (TEM) and Scanning Electron Microscope (SEM). We prepared Ag/Th nanocomposites successfully for the first time without any reducing or binding agent. XRD patterns are consistent with that of silver and thiophene molecules are present in the final products. A SEM image shows the uniform particles distribution. The particles are spherical in nature and seem to be nanosized, typically in the range of < 100 nm. Finally, we observed a strong interaction between the Ag⁺ ion and sulfur atom of thiophene ring. This work provides a simple route for the synthesis of Ag/Th nanocomposites.     

Preparation and characterizations of polyaniline (PANI)/ZnO nanocomposites film using solution casting method

Polyaniline (PANI)-ZnO nanoparticles composites film has been successfully fabricated by solution casting technique on glass substrate in which ZnO nanopowder was prepared via auto combustion method and used as inorganic materials. The as-grown nanocomposites film has been characterized using X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Transmission electron microscopy (TEM) and Atomic Force Microscopy (AFM) for their structural and morphological characterizations. X-ray diffraction studies of as-grown film showed the reflection of ZnO nanoparticles along with a broad peak of PANI. The AFM study of the film shows the incorporation of ZnO nanoparticles into the polymer matrix which was further supported by roughness measurement. TEM images showed that the size of ZnO nanoparticles in the nanocomposites increase from ~ 35 nm to ~ 45 nm, indicating the interaction of nanoparticles with PANI molecular chains. FTIR spectra showed a band at 501 cm⁻¹ due to ZnO nanoparticles while the hydrogen bonding between the amine group of PANI and ZnO nanoparticles had been confirmed from the presence of the absorption band at 1148 cm⁻¹.     

Effect of crystallite size of zinc oxide on the mechanical,thermal and flow properties of polypropylene/zinc oxide nanocomposites

ZnO nanoparticles were prepared using zinc chloride and sodium hydroxide in chitosan medium. Prepared ZnO (NZO) and commercial ZnO (CZO) was characterized by scanning electron microscopic and X-ray diffraction studies. PP/ZnO nanocomposites were prepared using 0–5 wt% of zinc oxide by melt mixing. It was then compression moulded into films. Transparency of the composite films were improved by reducing the crystallite size of ZnO. Melt flow index studies revealed that NZO increased the flow characteristics of PP while CZO decreased. X-ray diffraction studies indicated α-form of isotactic polypropylene. An increase in mechanical properties, dynamic mechanical properties and thermal stability of the composites were observed by the addition of ZnO. Uniform dispersion of the ZnO was observed in the scanning electron micrographs of the tensile fractured surface of composites.     

Particle size distribution study by small-angle X-ray scattering technique and photoluminescence property of ZnO nanoparticles

ZnO nanoparticles have been synthesised by thermal decomposition of zinc acetate at ～800°C. The structural characteristics and size distribution of ZnO nanoparticles have been investigated by X-ray powder diffraction (XRD) and small-angle X-ray scattering (SAXS), respectively. SAXS study reveals nanoparticles are of different sizes: namely 23 wt% of 8 nm, 19 wt% of 21 nm and 58 wt% of 51 nm. These ZnO nanoparticles possess yellow visible emission at 552 nm. The polydispersity and single emission peak at 552 nm in ZnO nanoparticles suggest that the yellow emission might be a bulk property instead of having a surface origin in nanostructured ZnO. The surface impurities are characterised by Fourier-transform infrared spectroscopy. The quenching of band edge emission in ZnO nanoparticles seems due to the presence of surface impurities.     

Structural and thermal properties of polystyrene/CoAl-layered double hydroxide nanocomposites prepared via solvent blending: effect of LDH loading

Nanocomposites of polystyrene (PS) with modified CoAl-layered double hydroxide (CoAl–LDH) were prepared via simple solvent blending method and the effect of CoAl–LDH content on the structural and thermal properties was investigated. The structural and thermal properties of the nanocomposites were characterised by X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy, thermogravimetric analysis and differential scanning calorimetry. The nano-scale dispersion of the CoAl–LDH layers in the PS matrix is verified by the (0?0?3) XRD reflection of the modified CoAl–LDH. The XRD data show that the exfoliated PS/CoAl–LDH nanocomposites can be obtained by controlling the LDH loading of about 5?wt%. TEM analysis also confirms the formation of exfoliated PS nanocomposites with 3?wt% and 5?wt% LDH loading. The thermal degradation temperature of the PS nanocomposite containing 5?wt% CoAl–LDH is found to be 12°C higher than that of pure PS when 50% weight loss is selected as a point of comparison. The glass transition temperature (T _g) of PS nanocomposites is about 14°C higher than that of pure PS.     

Optical,Structural, and Magnetic Properties of ZnO:Co Nanoparticles Prepared by a Thermal Treatment of Ball Milled Precursors

In this study, ZnO nanoparticles with different cobalt concentration were prepared by a simple and rapid method. This method is based on a short time solid state milling and calcinations of zinc acetate, cobalt acetate, and citric acid powders. The samples were characterized using X-ray diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared (FTIR), photoluminescence, and UV-vis. spectroscopy. It was shown that a very low substitution of Co (less than 1% of molecular weight) has little effect on the lattice parameters of ZnO and significantly decreases the band gap (E _g ) value of the synthesized ZnO:Co nanoparticles. Calculation based on the XRD data shows that the average crystallite sizes of ZnO particles are nearly 18 nm. Photoluminescence spectroscopy shows that many defects such as interstitial zinc, zinc vacancy, and exciton recombination are responsible for the observed optical properties. Magnetization measurements which were performed by using a superconducting quantum interference device (SQUID) magnetometer determine the paramagnetic behavior for all samples due to the absence of oxygen vacancy.     

Nonlinear optical investigations on Al doping ratio in ZnO thin film under pulsed Nd:YAG laser irradiation

In the present study, it has been reported on the effect of Al doping on linear and nonlinear optical properties of ZnO thin films synthesized by spray pyrolysis method. The structural properties of ZnO thin films with different Al doping levels (0–4 wt%) were analyzed using X-ray diffraction (XRD). The results obtained from XRD analysis indicated that the grain size decreased as the Al doping value increased. The UV–Vis diffused refraction spectroscopy was used for calculation of band gap. The optical band gap of Al-doped ZnO (AZO) thin films is increased from 3.26 to 3.31 eV with increasing the Al content from 0 to 4 wt%. The measurements of nonlinear optical properties of AZO thin films have been performed using a nanosecond Nd:YAG pulse laser at 532 nm by the Z-scan technique. The undoped ZnO thin film exhibits reverse saturation absorption (RSA) whereas the AZO thin films exhibit saturation absorption (SA) that shows RSA to SA process with adding Al to ZnO structure under laser irradiation. On the other hand, all the films showed a self-defocusing phenomenon because the photons of laser stay on below the absorption edge of the ZnO and AZO films. The third-order nonlinear optical susceptibility, χ⁽³⁾, of AZO thin films, was varied from of the order of 10^?5–10^?4 esu. The results suggest that AZO thin films may be promising candidates for nonlinear optical applications.     

Effect of zinc oxide concentration in fluorescent ZnS:Mn/ZnO core–shell nanostructures

In the present work, we have prepared zinc sulphide (ZnS:Mn)/zinc oxide (ZnO) core–shell nanostructures by a chemical precipitation method and observed the effect of ZnO concentration on the fluorescent nanoparticles. Change in the morphological and optical properties of core–shell nanoparticles have been observed by changing the concentration of ZnO in a core–shell combination with optimum value of Mn to be 1 % in ZnS. The morphological studies have been carried out using X-ray diffraction (XRD) and transmission electron microscopy. It was found that diameter of ZnS:Mn nanoparticles was around 4–7 nm, each containing primary crystallites of size 2.4 nm which was estimated from the XRD patterns. The particle size increases with the increase in ZnO concentration leading to the well-known ZnO wurtzite phase which was coated on the FCC phase of ZnS:Mn. Band gap studies were performed by UV–visible spectroscopy and a red shift in absorption spectra have been observed with the addition of Mn as well as with the capping of ZnO on ZnS:Mn. The formation of core–shell nanostructures have been also confirmed by FTIR analysis. Photoluminescence studies show that emission wavelength is red shifted with the addition of ZnO layer on ZnS:Mn(1 %). These core–shell ZnS:Mn/ZnO nano-composites will be a very suitable material for specific kind of tunable optoelectronic devices.     

Synthesis,structural and optical characterization of Ni-doped ZnO nanoparticles

Nanocrystalline Zn_1−x Ni _x O (x = 0.00, 0.02, 0.04, 0.06, 0.08) powders were synthesized by a simple sol–gel autocombustion method using metal nitrates of zinc, nickel and glycine. Structural and optical properties of the Ni-doped ZnO samples annealed at 800 °C are characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive analysis using X-rays (EDAX), UV–visible spectroscopy and photoluminescence (PL). X-ray diffraction analysis reveals that the Ni-doped ZnO crystallizes in a hexagonal wurtzite structure and secondary phase (NiO) was observed with the sensitivity of XRD measurement with the increasing nickel concentration (x ≥ 0.04). The lattice constants of Ni-doped ZnO nanoparticles increase slightly when Ni²⁺ is doped into ZnO lattice. The optical absorption band edge of the nickel doped samples was observed above 387 nm (3.20 eV) along with well-defined absorbance peaks at around 439 (2.82 eV), 615(2.01 eV) and 655 nm (1.89 eV). PL measurements of Ni-doped samples illustrated the strong UV emission band at ~3.02 eV, weak blue emission bands at 2.82 and 2.75 eV, and a strong green emission band at 2.26 eV. The observed red shift in the band gap from UV–visible analysis and near band edge UV emission with Ni doping may be considered to be related to the incorporation of Ni ions into the Zn site of the ZnO lattice.     

Quantum confinement effect of CdS nanoparticles dispersed within PVP/PVA nanocomposites

Nanocomposite films of CdS nanoparticles within PVP/PVA blend were prepared. The prepared films were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy, Ultraviolet–visible spectroscopy (UV–vis), transmission electron microscopy (TEM) and photoluminescence (PL) spectra. The amount of Cd⁺ used strongly influenced the size of the CdS nanoparticles, which was confirmed by XRD, UV–vis absorption spectra, PL emission spectra and TEM images. Smaller sized CdS nanoparticles were formed in higher content of cadmium. The results of XRD indicate that CdS nanoparticles were formed with hexagonal phase in the polymeric matrix. PL and UV–vis spectra reveal that nanocomposite films shows quantum confinement effect. Optical band gap and particle size were calculated and is in agreement with the results obtained from TEM data. The direct energy band gap was increased up to 2.86 eV.     

Optical properties of zinc oxide thin films doped with aluminum and lithium

Aluminum doped Zinc Oxide (AZO) and Lithium doped Zinc Oxide (LZO) thin films are obtained by Pulsed Laser Deposition (PLD) method. These films are characterized by using Spectroscopic Ellipsometry (SE), X-ray Diffraction (XRD) and Photoluminescence (PL). By modeling the ellipsometry spectra we get the dielectric functions, the optical band gap E_g, and the electrical properties. Our results show the influence of the processing parameters on the optical and structural properties of doped ZnO thin films. The post-annealing treatment applied to AZO thin films, changes strongly the optical properties, by lowering the resistivity and red-shifting the band gap.     

Optical and electrical properties of aluminum-doped zinc oxide nanoparticles

Aluminum-doped zinc oxide nanopowders were prepared using a surfactant assisted complex sol–gel method, and were characterized using inductively coupled plasma, X-ray diffraction, scanning electron microscopy/energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and UV–Vis spectroscopy. Al was effectively doped into the ZnO matrix with concentrations up to 6.00 atomic ratio percents (at.%). X-ray diffraction results revealed that all of the nanoparticles had a pure hexagonal wurtzite structure free of any impurities when annealing temperature was below 1273 K. The optical band gap of the nanopowders, which was affected by the Al-doping concentration, reached a maximum of 3.43 eV when ZnO was doped with 4.00 at.% Al. The effect of post-annealing temperature and vacuum conditions on the resistivities of the Al-doped ZnO nanoparticles was also investigated. And the lowest volume resistivity (1.2 Ω cm) was achieved by annealing the Al-doped ZnO nanoparticles in a vacuum at 1173 K for 2 h.     

Green synthesis of zinc oxide nanoparticles using tomato (Lycopersicon esculentum) extract and its photovoltaic application

With an increasing awareness of green and clean energy, zinc oxide-based solar cells were found to be suitable candidates for cost-effective and environmentally friendly energy conversion devices. In this paper, we have reported the green synthesis of zinc oxide nanoparticles (ZnONPs) by thermal method and under microwave irradiation using the aqueous extract of tomatoes as non-toxic and ecofriendly reducing material. The synthesised ZnONPs were characterised by UV–visible spectroscopy (UV–vis), infra-red spectroscopy, particle size analyser, scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray diffraction study (XRD). A series of ZnO nanocomposites with titanium dioxide nanoparticles (TiO₂) and graphene oxide (GO) were prepared for photovoltaic application. Structural and morphological studies of these nanocomposites were carried out using UV–vis, SEM, XRD and AFM. The current–voltage measurements of the nanocomposites demonstrated enhanced power conversion efficiency of 6.18% in case of ZnO/GO/ TiO₂ nanocomposite.     

Effect of zinc oxide concentration on the core–shell ZnS/ZnO nanocomposites

In this work, synthesis and characterization of core–shell zinc sulphide (ZnS)/zinc oxide (ZnO) nanocomposites has been reported to see the effect of ZnO concentration in core–shell combination. The nascent as well as core–shell nanostructures were prepared by a chemical precipitation method starting with the synthesis of nascent ZnS nanoparticles. The change in morphological and optical properties of core–shell nanoparticles was studied by changing the concentration of ZnO for a fixed amount of ZnS. The nascent ZnS nanoparticles were of 4–6 nm in diameter as seen from TEM, each containing primary crystallites of size 1.8 nm which was estimated from the X-ray diffraction patterns. However, the particle size increases appreciably with the increase in ZnO concentration leading to the well known ZnO wurtzite phase coated with FCC phase of ZnS. Band gap studies were done by UV–visible spectroscopy and it shows that band gap tunability can be achieved appreciably in case of ZnS/ZnO core–shell nanostructures by varying the concentration of ZnO. Fourier transform infrared analysis also proves the formation of core–shell nanostructures. Photoluminescence studies show that emission wavelength blue shifts with the increase in ZnO concentration. These core–shell ZnS/ZnO nanocomposites will be a very suitable material for any type of optoelectronic application as we can control various parameters in this case in comparison to the nascent nanostructures.