Chiral ionic liquids as stationary phases in gas chromatography

Recently, it has been found that room-temperature ionic liquids can be used as stable, unusual selectivity stationary phases. They show "dual nature" properties, in that they separate nonpolar compounds as if they are nonpolar stationary phases and separate polar compounds as if they are polar stationary phases. Extending ionic liquids to the realm of chiral separations can be done in two ways: (1) a chiral selector can be dissolved in an achiral ionic liquid, or (2) the ionic liquid itself can be chiral. There is a single precedent for the first approach, but nothing has been reported for the second approach. In this work, we present the first enantiomeric separations using chiral ionic liquid stationary phases in gas chromatography. Compounds that have been separated using these ionic liquid chiral selectors include alcohols, diols, sulfoxides, epoxides, and acetylated amines. Because of the synthetic nature of these chiral selectors, the configuration of the stereogenic center can be controlled and altered for mechanistic studies and reversing enantiomeric retention.     

Immobilized ionic liquids as high-selectivity/high-temperature/high-stability gas chromatography stationary phases

Ionic liquids (ILs) are a class of nonmolecular solvents in which the cation/anion combination can be easily tuned to provide desired chemical and physical properties. When used as stationary phases in gas-liquid chromatography, ionic liquids exhibit dual nature retention selectivity. That is, they are able to separate polar molecules such as a polar stationary phase and nonpolar molecules such as a nonpolar stationary phase. However, issues such as optimization of the wetting ability of the ionic liquid on fused-silica capillaries, the maximum operating temperatures of the stationary phases, and nonuniform film thickness on the wall of the capillary at high temperatures have limited their use in gas chromatography. As described in this paper, these limitations are overcome by cross-linking a new class of ionic liquid monomers by free radical reactions to provide a more durable and robust stationary phase. By lightly cross-linking the ionic liquid stationary phase using a small amount of free radical initiator, high-efficiency capillary columns were produced that are able to endure high temperatures with little column bleed. Two types of cross-linked IL stationary phases are developed. A partially cross-linked stationary phase allows for high-efficiency separations up to temperatures of approximately 280 degrees C. However, by creating a more highly cross-linked stationary phase of geminal dicationic ILs, exclusively, an increase in efficiency is observed at high temperatures allowing for its use over 350 degrees C. In addition, through the use of solvation thermodynamics and interaction parameters, it was shown that the cross-linking/immobilization of the ionic liquid does not affect the selectivity of the stationary phase thereby preserving its dual nature retention behavior.     

High-stability ionic liquids. A new class of stationary phases for gas chromatography

Room-temperature ionic liquids are a class of non-molecular ionic solvents with low melting points. Their properties have the potential to be especially useful as stationary phases in gas-liquid chromatography (GLC). A series of common ionic liquids were evaluated as GLC stationary phases. It was found that many of these ionic liquids suffer from low thermal stability and possess unfavorable retention behavior for some classes of molecules. Two new ionic liquids were engineered and synthesized to overcome these drawbacks. The two new ionic liquids (1-benzyl-3-methylimidazolium trifluoromethanesulfonate and 1-(4-methoxyphenyl)-3-methylimidazolium trifluoromethanesulfonate) are based on "bulky" imidazolium cations with trifluoromethanesulfonate anions. Their solvation characteristics were evaluated using the Abraham solvation parameter model and correlations made between the structure of the cation and the degree to which the ionic liquids retain certain analytes. The new ionic liquids have good thermal stability up to 260 degrees C, provide symmetrical peak shapes, and because of their broad range of solvation-type interactions, exhibit dual-nature selectivity behavior. In addition, the ionic liquid stationary phases provided different retention behavior for many analytes compared to a commercial methylphenyl polysiloxane GLC stationary phase. This difference in selectivity is due to the unique solvation characteristics of the ionic liquids and makes them very useful as dualnature GLC stationary phases.     

Nonmolecular solvents in separation methods: dual nature of room temperature ionic liquids

Room temperature ionic liquids (RTIL) are molten salts starting to be used as nonmolecular solvents in separation methods mainly for their extremely low vapor pressure and thermal stability. RTILs are formed by an anion associated to a cation. This intrinsic structure gives them a dual nature. When used as additives in RPLC mobile phases to enhance basic compound separation, RTILs lose their particular physicochemical properties to become just salts. However, a given RTIL is not equivalent to another one made with the same cation. It is shown that both the anion and the cation contribute to solute retention and peak efficiency extending beyond simple "salting-out" or ion-pairing effects. Nine different alkyl-methyl-imidazolium ionic liquids with different alkyl chain length and chloride or BF(4-) or PF(6-) anions were used as additives (50 mM max. conc.) in the liquid chromatography separation of some cationic basic solutes on a Kromasil C18 column. It is shown with sodium salts and an acetonitrile-water 30/70 v/v mobile phase that anions can adsorb on the stationary phase surface according to their lyotropic character. They can also form ion pairs with the cationic basic solutes. Alkyl-imidazolium cations also adsorb on the C18 bonded stationary phase due to hydrophobic character depending on their alkyl chain length. Anion adsorption dramatically increases the cationic solute retention factors when cation adsorption decreases them. The cation adsorption is mainly responsible for peak shape and efficiency enhancements. RTILs are additives that enhance the basic cationic solute peak shape changing peak position. A wise choice of the appropriate combination of anion lyotropy with imidazolium cation hydrophobicity allows playing with solute selectivity and analysis duration.     

Single-walled carbon nanotubes used as stationary phase in GC

Single-walled carbon nanotubes (SWNTs) have high surface area, high adsorption ability, and nanoscale interactions. In this study, capillary columns including SWNTs, ionic liquid (IL), and IL + SWNTs for GC were prepared. The separation results showed that SWNTs possessed a wide selectivity toward alkanes, alcohols, aromatic compounds, and ketones, and a SWNT capillary column was a very useful GC column for the separation of gas samples. Coating the IL stationary phase on the SWNT capillary column, the SWNTs were able to improve chromatographic characteristic of ionic liquid. Comparing the IL coated on three graphite carbon black capillary columns, which were prepared by dynamic coating, static coating, and chemical bonding the Carbopack C with on SWNTs capillary column, the capacity factors were much higher on the SWNT column. The SEM showed that SWNTs could be bonded to the inner surface of capillary tubing, and most of them were linked end-to-end to form a layer of network structure of skeletons resulting in a high surface area, which increased the interactions between stationary phase and analytes. This is the first single-wall carbon nanotubes bonded to the fused-silica capillary tubing. In the first approach, SWNTs assist ionic liquid with enhanced chromatographic characteristic in GC. This work indicates that SWNTs make it possible to extend the application range on the newly prepared chromatographic stationary phases for GC.     

Chemical modification of carbonaceous stationary phases by the reduction of diazonium salts

This paper describes a new strategy for the creation of chemically modified carbonaceous stationary phases. The strategy exploits the electroreduction of arenediazonium salts as a means for functionalizing the surface of glassy carbon (GC) and porous graphitic carbon (PGC) stationary phases. The one-electron reduction of these salts forms an arene radical which then couples via a carbon-carbon linkage to the carbon framework at the surface of the stationary phase. Two arenediazonium-based modifiers were used in evaluating the potential utility of this strategy: 4-nitrobenzenediazonium tetrafluoroborate for the GC and PGC phases and 4-hexylbenzenediazonium tetrafluoroborate for only the PGC phases. Modifications were carried out by packing the phases into a column used for electrochemically modulated liquid chromatography. The effectiveness of the modifications was assessed by X-ray photoelectron spectroscopy and by comparing the liquid separation of a series of mixtures before and after coating deposition. For the nitrobenzyl-modified GC phase, the test mixture contained both anisole and fluoranthene. The performance of the nitrobenzyl- and hexylbenzyl-modified PGC stationary phases was characterized by the separations of substituted phenols (i.e., nitrophenol and resorcinol) and a few important pharmaceutical agents (i.e., hexobarbital, oxazepam, and nitrazepam). The potential utility of this modification procedure to form stationary phases that are stable upon extended exposure to aggressive mobile phases is discussed and briefly examined.     

Elution-extrusion countercurrent chromatography. Use of the liquid nature of the stationary phase to extend the hydrophobicity window

Countercurrent chromatography (CCC) is a liquid chromatography technique with a liquid stationary phase. Taking advantage of the liquid nature of the stationary phase, it is possible to perform unique operations not possible in classical liquid chromatography with a solid stationary phase. It is easy to avoid any solute-irreversible absorption in the CCC column. If the retention volumes of solutes become too high, the dual mode will be used. The roles of the phases are reversed. The stationary phase becomes the mobile phase, and the CCC column is started again. The solutes elute rapidly in what was previously the stationary phase. The theoretical basis of the dual-mode method is recalled. The dual-mode method is a discontinuous method. The separation should be stopped when the phase switch is performed. The elution-extrusion procedure is another way to avoid any irreversible adsorption of solutes in the column. The method uses the fact that the liquid volumes occupied by the solutes highly retained inside the column can be orders of magnitude lower than the mobile-phase volume that would be needed to elute them. The elution-extrusion method also has two steps: the first step is a regular CCC chromatogram. Next, the stationary phase containing the partially separated hydrophobic solutes is extruded out of the column in a continuous way using the liquid stationary phase. The theory of the process is developed and compared to the dual-mode theory. Alkylbenzene homologues are experimentally used as model compounds with the heptane/methanol/water biphasic liquid system to establish the theoretical treatment and compare the performance of two types, hydrodynamic and hydrostatic, of CCC columns. It is shown that the method can dramatically boost the separation power of the CCC technique. An apparent efficiency higher than 20 000 plates was obtained for extruded octylbenzene and a 160-mL hydrodynamic CCC column with less than 500 plates when conventionally used.     

Evaluation of a medium-polarity ionic liquid stationary phase in the analysis of flavor and fragrance compounds

The present research is focused on the evaluation, in terms of efficiency and polarity, of a recently introduced gas chromatography (GC) column, coated with a 1,12-di(tripropylphosphonium) dodecane bis(trifluoromethansulfonyl) amide ionic-liquid stationary phase (SLB-IL59) and its application to the analysis of a complex essential oil. The ionic liquid column demonstrated very good efficiency, in terms of plate number, and a polarity close to that of the 100% poly(ethyleneglycol) stationary phase. In this preliminary evaluation, the SLB-IL59 30 m column was subjected to bleeding measurements, by means of conventional gas chromatography/mass spectrometry (GC/MS) and, in addition, of comprehensive 2D GC. The SLB-IL59 column (30 m × 0.20 μm d(f), 0.25 mm i.d.) was then evaluated in the analysis of typical essential oil constituents, in the form of pure standard compounds. Resolution toward several analytes was measured and the results were compared to those obtained with both apolar [silphenylene polymer, equivalent to poly(5% diphenyl/95% dimethylsiloxane)] and medium-polarity [100% poly(ethyleneglycol)] stationary phases, namely, the most common columns employed in the analysis of essential oils; peak symmetry, for different essential oil constituents, was also measured and expressed through tailing factors (at 10% of peak height). The final part of the investigation was devoted to the GC/MS analysis of lemon essential oil, with GC-flame ionization detection (FID) used for quantification. Linear retention indices of all the identified compounds were determined, and the data obtained were compared to those attained on the apolar and "wax" columns. The results obtained in the present investigation reveal the great potential of this novel stationary phase, as a medium-polarity alternative, in the analysis of essential oils.     

Preparation of AgX (X = Cl, I) nanoparticles using ionic liquids

Nanoparticles of silver halides have been prepared by mixing silver halide powder with a single liquid phase consisting of an ionic liquid, isooctane, n-decanol and water. Much higher nanoparticle concentrations may be formed with ionic liquids using this new simple method than are found with conventionally applied surfactants. This method also emphasizes the applicability of ionic liquids as versatile components in microemulsions and as solvents for the synthesis of nanomaterials. The effect on the nanoparticles of changing the composition of the liquid mixtures and the nature of the ionic liquid is analysed. High nanoparticle concentrations were only found with chloride based ionic liquids, indicating the importance of the ionic liquid anion in the mechanism of the reaction.     

Theory and use of the pseudophase model in gas-liquid chromatographic enantiomeric separations

The theory and use of the "three-phase" model in enantioselective gas-liquid chromatography utilizing a methylated cyclodextrin/polysiloxane stationary phase is presented for the first time. Equations are derived that account for all three partition equilibria in the system, including partitioning between the gas mobile phase and both stationary-phase components and the analyte equilibrium between the polysiloxane and cyclodextrin pseudophase. The separation of the retention contributions from the achiral and chiral parts of the stationary phase can be easily accomplished. Also, it allows the direct examination of the two contributions to enantioselctivity, i.e., that which occurs completely in the liquid stationary phase versus the direct transfer of the chiral analyte in the gas phase to the dissolved chiral selector. Six compounds were studied to verify the model: 1-phenylethanol, alpha-ionone, 3-methyl-1-indanone, o-(chloromethyl)phenyl sulfoxide, o-(bromomethyl)phenyl sulfoxide, and ethyl p-tolylsulfonate. Generally, the cyclodextrin component of the stationary phase contributes to retention more than the bulk liquid polysiloxane. This may be an important requirement for effective GC chiral stationary phases. In addition, the roles of enthalpy and entropy toward enantiorecognition by this stationary phase were examined. While enantiomeric differences in both enthalpy and entropy provide chiral discrimination, the contribution of entropy appears to be more significant in this regard. The three-phase model may be applied to any gas-liquid chromatography stationary phase involving a pseudophase.     

Preparation of Inorganic Materials Using Ionic Liquids

Conventional synthesis of inorganic materials relies heavily on water and organic solvents. Alternatively, the synthesis of inorganic materials using, or in the presence of, ionic liquids represents a burgeoning direction in materials chemistry. Use of ionic liquids in solvent extraction and organic catalysis has been extensively studied, but their use in inorganic synthesis has just begun. Ionic liquids are a family of non‐conventional molten salts that can act as templates and precursors to inorganic materials, as well as solvents. They offer many advantages, such as negligible vapor pressures, wide liquidus ranges, good thermal stability, tunable solubility for both organic and inorganic molecules, and much synthetic flexibility. In this Review, the use of ionic liquids in the preparation of several categories of inorganic and hybrid materials (i.e., metal structures, non‐metal elements, silicas, organosilicas, metal oxides, metal chalcogenides, metal salts, open‐framework structures, ionic liquid‐functionalized materials, and supported ionic liquids) is summarized. The status quo of the research field is assessed, and some future perspectives are furnished.     

Polar-liquid, derivatized cyclodextrin stationary phases for the capillary gas chromatography separation of enantiomers

A new class of hydrophilic, relatively polar liquid, cyclodextrin (CD) derivatives have been used as highly selective chiral stationary phases (CSPs) for capillary gas chromatography (GC). Several possible requirements for liquidity in CD derivatives are discussed. O-(S)-2-Hydroxypropyl derivatives of alpha-, beta-, and gamma-cyclodextrins were synthesized, exclusively characterized, permethylated, and evaluated for enantioselectivity. Seventy pairs of enantiomers were resolved. They represent a wide variety of structural types and classes of compounds including chiral alkyl amines, amino alcohols, epoxides, pyrans, furans, sugars, diols, esters, ketones, bicyclic compounds, alcohols, and so on. Many of these compounds were not aromatic and cannot be resolved on any known liquid chromatographic CSP. Often, these enantiomers had far less functionality than required for LC separation. General properties of these CSPs as well as possible insights into the separation mechanism are discussed.     

利用离子液体制备无机气凝胶的研究进展

气凝胶具有三维纳米多孔网络结构,独特的结构使它具有低密度、高比表面积和高孔隙率等性质以及低热导率、低介电常数和低声传播速率等性能,在隔热、介电、隔声、催化、吸附等领域具有广阔的应用前景.然而,溶剂-凝胶法作为目前制备气凝胶最成熟、应用最广的技术,需要使用大量的有机溶剂,严苛而危险的超临界干燥工艺进一步推高了成本,限制了气凝胶的大规模工业化生产和应用,因此,降低成本和在常压干燥条件下制备高比表面积的块状气凝胶是气凝胶产业急需解决的问题.离子液体被称为21世纪的绿色溶剂,具有低蒸气压、低表面张力、高催化性和高溶解性等特殊性质.离子液体与气凝胶材料的发展几乎同步,但直到2000年两种材料才产生交集.离子液体作为模板剂具有微观结构导向作用,使纳米孔结构均一化,其不挥发性和低表面张力保证了老化和常压干燥过程中纳米孔结构不会因毛细管力而坍塌破坏,另外其催化作用可以缩短凝胶时间.因此,离子液体为常压干燥合成气凝胶提供了新的工艺路线.目前,有关借助离子液体制备 SiO2气凝胶、TiO2气凝胶、SiO2-TiO2复合气凝胶、炭气凝胶等无机气凝胶的探索均已展开,其中制备 SiO2气凝胶的研究最多,涉及工艺、微观结构、掺杂和应用等方面.通过常压干燥可获得比表面积高达677 m2/g 的块状气凝胶,通过选用不同的离子液体还可以控制纳米孔的微观形貌,所得 SiO2气凝胶产物在电化学、生物、吸附等领域有较高的应用潜力.利用离子液体替代有机溶剂可以使得到的TiO2气凝胶不经煅烧即含有锐钛矿相,通过金属原子 Ag、Fe、Ge等掺杂改性,可进一步提高锐钛矿相的结晶度,提升其光催化性能.利用离子液体制得的 SiO2-TiO2复合气凝胶具有一定强度和良好的光催化活性.此外,除在传统的溶胶-凝胶法中用作模板剂或催化剂外,离子液体还可作为新型的炭源用于制备炭气凝胶,即通过熔盐法高温炭化裂解离子液体"自上而下"直接制备.这种方法可以制备杂原子在原子水平上均匀分布的功能化炭气凝胶,无需制备有机气凝胶前驱物,极大缩短制备周期,并且炭气凝胶产物的比表面积相对更高,得到了科研界的广泛关注.     

All-hydrocarbon liquid crystalline polysiloxane polymer as stationary phase in gas chromatography capillary column for separation of isomeric compounds of polynuclear aromatic hydrocarbons

Two new and high-purity all-hydrocarbon side-chain liquid crystalline polysiloxane polymers were synthesized by grafting all-hydrocarbon liquid crystal monomers onto a polymethylhydrosiloxane backbone. The two polysiloxane polymers show both smectic B and E mesophases which were characterized by (differential scanning calorimetry and X-ray analysis. As stationary phases, these liquid crystalline polysiloxane polymers were coated on the inner surface of a capillary column (i.d. = 0.32 mm, film thickness d(f) ≈ 0.25 μm) using the static coating method. The capillary column was installed on a GC/MS instrument. We used a standard commercial mixture of 21 species of polynuclear aromatic hydrocarbons (purchased from Supelco Co. and Merck Co.) to test the chromatographic behavior of the coated stationary phase. Test results of the isomeric pair compounds show a better separation resolution than identical tests using the commercial HP-5 capillary column, which is a standard and state-of-the-art analytical tool for the chromatographic resolution of PAHs.     

Covalently bound ionene polyelectrolyte-silica gel stationary phases for HPLC

Micelle-mimetic ionene-based stationary phases for high-performance liquid chromatography (HPLC) are prepared by attaching [3,16]- and [3,22]-ionenes to aminopropyl silica through a carbon-nitrogen bond. These [x,y]-ionenes are polyelectrolytic molecules consisting of dimethylammonium charge centers interconnected by alternating alkyl chain segments containing x and y methylene groups, some of which can form aggregate species whose properties mimic those of conventional surfactant micelles. These ionene-bonded stationary phases were characterized using different recommended HPLC test mixtures. Test solute chromatographic behavior on the ionene phases was found to be similar to that of intermediate oligomeric or polymeric C-18 and/or phenyl phases, depending upon the specific test mixture employed. In addition, the phases exhibit significant solute shape recognition ability. The ionene stationary phases were successfully employed for the separation of the components of the recommended ASTM reversed-phase test mixture, as well as for ortho-, meta- and para-disubstituted benzenes and other positional or geometric isomeric compounds. The ionene materials allow for chromatographic separations under either reversed-phase or ion-exchange conditions. The retention mechanism on these multimodal phases can occur by hydrophobic partitioning or electrostatic interactions, depending upon the characteristics of the components of the analyte mixture (neutral or anionic). The effects of alteration of the percent organic modifier, flow rate and temperature of the mobile phase on chromatographic retention and efficiency on these phases were briefly examined.     

功能侧链液晶聚丙烯酸酯的性能及应用前景

基于国内外最新研究文献，系统论述了新型功能性侧链液晶聚丙烯酸酯的液晶性质，光电性质及应用前景，指出这类聚合物一般显示热致性向列型或近晶型液晶相，液晶相转变温度和液晶态温度范围随链结构的不同发生显著变化，具有较短的电场及光场响应时间，对某些有机物质具有选择吸附能力。可望用作光学信息储存材料，气相色谱固定相材料以及复合材料的界面改性材料等。     

Application of ionic liquids in photopolymerizable holographic materials

The influence of ionic liquids in photopolymerizable holographic materials was investigated extensively. The structures of ionic liquids have important effect on the properties of the materials. Although not all tested ionic liquids can improve the properties of the materials, the ionic liquids based on imidazolium, pyridium, or phosphonium with appropriate counter anions can be used as additives to increase the sensitivity, the diffraction efficiency, and the resolution of the materials in the thin hologram. Polymerizable ionic liquids have also been used as additives. Higher sensitivity, higher diffraction efficiency and higher resolution were obtained as well. These ionic liquids can carry out the photopolymerization during exposure to UV light to recording the hologram. They may assist to form a more stable hologram.     

Prediction for the separation efficiency of a pair of enantiomers during chiral high-performance liquid chromatography using a quartz crystal microbalance

A simple and rapid screening method of the chiral stationary phase during high-performance liquid chromatography (HPLC) utilizing a quartz crystal microbalance (QCM) has been developed for the chiral separation of a pair of enantiomers. The outline of the method is as follows: a self-assembled monolayer (SAM) is constructed on the gold electrodes of the QCM sensor chips by utilizing the interaction between thiols and gold. The chiral selectors used as chiral stationary phases in the HPLC are then immobilized, and a pseudostationary phase is constructed on the electrodes. Subsequently, the sensors are equilibrated in the solutions, the targeted chiral samples are injected, and the frequency changes are observed. Four kinds of chiral molecules and three kinds of chiral stationary phases were examined in this study. When chiral separation is possible using the chiral stationary phase immobilized on the sensors, significant differences in the frequency changes are observed because the intensities based on interactions differ among the isomers. The developed method can predict not only the possibility for chiral separation but also the elution order from the chiral stationary phase column. Furthermore, the degree of the mutual separation of a pair of enantiomers seems to be roughly predictable from the difference in the frequency change (DeltaF) and first-order association rate constant (k(obs)). The method does not require several different kinds of chiral columns that are more expensive than achiral ones such as the octadecylsilica (ODS) column. The required amounts of the chiral stationary phases are extremely small, and the sensors with immobilized chiral selectors are reusable. In addition, the method requires only a few minutes to complete the analysis. Thus, considerable reductions in both cost and time are realized. By applying the developed method to many chiral molecules and chiral stationary phases, its superiority may be corroborated; thus, it is expected that the method can be effectively used for the selection of chiral stationary phases.     

Determination of the physical properties of room temperature ionic liquids using a Love wave device

In this work, we have shown that a 100 MHz Love wave device can be used to determine whether room temperature ionic liquids (RTILs) are Newtonian fluids and have developed a technique that allows the determination of the density-viscosity product, ρη, of a Newtonian RTIL. In addition, a test for a Newtonian response was established by relating the phase change to insertion loss change. Five concentrations of a water-miscible RTIL and seven pure RTILs were measured. The changes in phase and insertion loss were found to vary linearly with the square root of the density-viscosity product for values up to (ρη)(1/2) ~ 10 kg m(-2) s(-1/2). The square root of the density-viscosity product was deduced from the changes in either phase or insertion loss using glycerol as a calibration liquid. In both cases, the deduced values of ρη agree well with those measured using viscosity and density meters. Miniaturization of the device, beyond that achievable with the lower-frequency quartz crystal microbalance approach, to measure smaller volumes is possible. The ability to fabricate Love wave and other surface acoustic wave sensors using planar metallization technologies gives potential for future integration into lab-on-a-chip analytical systems for characterizing ionic liquids.     

Ionic liquids as matrixes for matrix-assisted laser desorption/ionization mass spectrometry

Room-temperature ionic liquids are useful as solvents for organic synthesis, electrochemical studies, and separations. We wished to examine whether their high solubalizing power, negligible vapor pressure, and broad liquid temperature range are advantageous if they are used as matrixes for UV-MALDI. Several different ionic matrixes were synthesized and tested, using peptides, proteins, and poly(ethylene glycol) (PEG-2000). All ionic liquids tested have excellent solubilizing properties and vacuum stability compared to other commonly used liquid and solid matrixes. However, they varied widely in their ability to produce analyte gas-phase ions. Certain ionic matrixes, however, produce homogeneous solutions of greater vacuum stability, higher ion peak intensity, and equivalent or lower detection limits than currently used solid matrixes. Clearly, ionic liquids and their more amorphous solid analogues merit further investigation as MALDI matrixes.