Provisionalization of a combination implant/natural abutment restoration

This article describes a technique the dental technician can use to fabricate a long-term combination implant and natural tooth provisional prosthesis that will be used to evaluate esthetics and function. This provisional will act as an interim prosthesis while additional implants are healing.     

The custom implant impression coping: technical note

Unsupported soft tissue can collapse around a submerged implant or abutment head during the time interval between removal of the provisional prosthesis and placement of the impression material. A technique is described for accurately recording the implant or abutment position as well as the position of the soft tissue for a single tooth restoration using the provisional prosthesis as a custom implant impression coping.     

Lipid peroxidation in patients with ischemic heart disease, hyperlipidemia and/or hypertension while polyunsaturated omega-3 fatty acids of plant and animal origin were in their diet

Missing anterior teeth are being replaced by implant-supported restorations quite frequently in modern dentistry. Providing the patient with a temporary prosthesis prior to or following implant fixture placement must satisfy established esthetic and functional criteria. When orthodontic treatment is included as part of the overall treatment effort, additional considerations include the retention and stabilization of newly established tooth positions. This article describes the fabrication, use and advantages of a provisional anterior prosthesis that replaces missing teeth prior to or following implant placement.     

Esthetic and prosthetic procedures in single-tooth replacement

Loss of anterior maxillary teeth always results in bone resorption and loss of interdental papillae, and the resorption makes a single tooth replacement by a dental implant very difficult. When infections have been present and the patient's history shows previous surgery at the apex of the root, bone destruction is substantial, which results in an increased resorption defect, thereby further increasing the aesthetic and prosthetic problems. This paper describes the steps necessary for implant surgery and the prosthetics; a brief summary is provided. The quality and quantity of bone, along with the space available between the adjacent teeth, are the basic factors in treatment planning and determine the type of implant to be used. Some resorption and bone defects are usually present after a tooth extraction, and bone regeneration procedures can be performed either before or simultaneously with the implant placement, with numerous flap designs available. Soft tissue augmentation can be achieved by taking a connective tissue graft from the palatal side. Antirotational devices (eg, hex lock abutments) are necessary for all implants in single tooth replacement. Screw-retained abutments can be used in posterior areas and in angled positions in facial areas as well. With proper single tooth implant position, cementation of laboratory fabricated crowns can be considered.     

Usefulness of enhanced insulin secretion during an oral glucose tolerance test as a predictor of restenosis after direct percutaneous transluminal coronary angioplasty during acute myocardial infarction in patients without diabetes mellitus

Extensive prosthodontic treatment often requires fabrication of long-term provisional restorations. Numerous materials and techniques have been described for prolonged insertion of interim restorations. This article describes a procedure for fabrication of long-term reinforced heat-processed provisional restorations based on a diagnostic wax-up. Reinforced heat-processed provisional restorations reduced flexure, which minimizes progressive loss of cement and diminished the possibility of recurrent decay. Occlusal stability and vertical dimension were maintained because of greater wear resistance. Occlusion, tooth contours, and pontic design developed in the provisional restoration were duplicated in the definitive restoration. The use of a matrix from a diagnostic wax-up facilitated fabrication of the prosthesis, and made the procedure less time-consuming and more predictable.     

Effect of cisplatin chemotherapy on extracortical tissue formation in canine diaphyseal segmental replacement

The reconstruction of large bone and joint defects after the resection of malignant tumors remains a major challenge. Chemotherapy has significantly lowered the risk of metastasic disease, but complications associated with reconstructive techniques continue to result in late morbidity. In the present study, biomechanical torsion testing, gait analysis, and histomorphometric and scanning electron microscopic evaluations of 24 dogs were used to examine the effects of preoperative and postoperative administration of cisplatin on the biologic fixation of a porous-coated segmental replacement prosthesis. The chemotherapy consisted of four cycles of cisplatin administered at a dosage of 75 mg/m2 preoperatively or postoperatively. The healing was enhanced by use of an autogenous corticocancellous bone graft. The graft was placed evenly around the prosthesis and the adjacent femoral cortex. Mechanical analyses of torsional stiffness, yield strength, and maximum strength revealed no statistically significant differences between the groups at 12 weeks. Such lack of difference was mainly due to the penetration of highly organized fibrous tissue into the porous surface; this provided strong fixation of the implant to bone even in the absence of bone ingrowth. Although bone ingrowth into the prostheses was not affected, electron microscopic, histomorphometric, and radiologic analyses showed a clear difference in the formation of new bone around the prosthesis. Preoperative chemotherapy did not alter the formation of new bone, but specimens from animals treated postoperatively with cisplatin showed significantly less bone graft resorption and less new bone formation. Hence, the effect of cisplatin administration caused only a temporary delay, not a permanent effect, on extracortical capsule formation. The formation of extracortical bone and soft tissue might prevent debris-incised osteolysis and, therefore, prevent late complications by forming a tight capsule around the bone-prosthetic interface.     

Current perspectives in residual ridge remodeling and its clinical implications: a review

PURPOSE: This article reviews the current understanding of the biology of tooth extraction wound healing and residual ridge remodeling. METHODS: The review of the biology of tooth extraction wound healing involves a discussion of the different cells populating the tooth extraction wound, the matrix formation, and the control of the repair process in the short-term. Defects in socket matrix formation or cellular activity will lead to stalled healing. The review of residual ridge remodeling describes the long-term result of tooth extraction and formation of residual ridges, in which the quantity of bone tissue continuously decreases. This may suggest that any potential regulatory factors of residual ridge resorption should have an adverse effect either on the increased catabolic activity by osteoclasts or on the decreased anabolic activity by osteoblasts. Both short-term tooth extraction healing and long-term residual ridge remodeling processes are interdependent. Furthermore, any potential genetic and environmental regulatory factors can affect the quality and quantity of bone by altering the gene expression events taking place in bone cells. RESULTS: The intent of this article was to review the current progresses of biologic research on residual ridge remodeling and to relate the changes at molecular, cellular, and tissue levels. The understanding of residual ridge remodeling may provide a sound scientific basis for improved restorative and therapeutic treatments of the edentulous population.     

Ten-year results for Br?nemark implants immediately loaded with fixed prostheses at implant placement

This investigation was initiated to develop a method to provide patients with a fixed provisional prosthesis placed at the time of implant placement. Sixty-three standard 3.75-mm Nobel Biocare implants of varying lengths were placed into mandibular sites in 10 patients and followed for up to 10 years. Twenty-eight implants were immediately loaded at implant placement, providing support for fixed provisional prostheses, while 35 adjacent implants were allowed to heal submerged and stress-free. Following a 3-month healing period, the submerged implants were exposed and definitive reconstruction was accomplished. All 10 prostheses supported by 28 implants placed into immediate function at the time of implant placement were successful during the 3-month healing period. Of these 28 implants placed into immediate function, 4 ultimately failed. Of the 35 submerged implants, all are osseointegrated and in function to date. Life-table analysis demonstrates an overall 10-year survival rate of 93.4% for all implants. The 10-year life-table analysis of survival is 84.7% for immediately loaded implants and 100% for submerged implants. Statistical analysis of the submerged versus immediately loaded implants demonstrates failure rates for immediately loaded implants to be significantly higher (P = .022 by the log rank test). These data demonstrate that although mandibular implants can be successfully placed into immediate function in the short term to support fixed provisional prostheses, long-term prognosis is guarded for those implants placed into immediate function distal to the incisor region.     

Status of the tick-borne diseases in sheep and goats in Turkey

A patient treatment is presented to demonstrate a technique using visible-light-cured (VLC) resin to create a characterized denture base for an interim denture. This indication for characterization is routinely seen with African-Americans with dark-pigmented gingiva. Using a combination of blue VLC tray resin and pink VLC denture base resin, the mixture achieves a darker-colored denture base. This technique was used for the fabrication of an interim denture for a patient who required an immediate interim denture. The prosthesis was worn during the healing phase and allowed the patient to function while the definitive prosthesis was being fabricated.     

Mastication forces and implant-bearing surface

This article discusses the shift of emphasis in implantology from the phenomenon of osseointegration of implants to the accurate fabrication of the prosthesis, recognizing the implant/prosthesis unit as an actual replica rather than a replacement of the missing tooth. The study of kinetics with its succession of mandibular cycles is used to discuss the integration of mastication and occlusion. The importance of periimplant ligament in natural teeth is discussed, along with the impact of its absence on implant mobility. The impact of the bone types and the root surface architecture on the implant-bearing surface is presented along with the stress of the mastication forces. All these factors have to be considered in the treatment planning and effectively communicated to the laboratory. The learning objective of this article is to provide updated information in those areas for the reader.     

Migration, particles, and fluid pressure. A discussion of causes of prosthetic loosening

Distal migration of the femoral component of a total hip replacement by as little as 0.33 mm during the first 6 postoperative months is predictive of the need for revision many years later. Because the fate of the prostheses is defined so early, it is unlikely that wear particles initiate loosening. However, the progression from the stage of early migration to clinical loosening has unknown causes, of which particles may be one. Slight instability associated with migration will lead to locally high fluid pressures surrounding the migrating prosthesis. Recent experiments applied a moderate fluid pressure to an implant to bone interface. This induced osteocyte death near the implant and subsequent bone resorption. Thus, there is evidence that fluid pressure and ensuing flow could be a main cause of not only pain, but also osteolysis necessitating revision.     

Biomechanical considerations when combining tooth-supported and implant-supported prostheses

The force distribution of multiple tooth-supported and implant-supported prostheses is completely different. A direct correlation exists between the degree of flexion at the site of loading and the amount of force distribution to other members of the prosthesis. Micromovement produced by the periodontal fibers facilitates force distribution to all the root surfaces of the natural tooth abutments. The rigidity of the implant/abutment/prosthesis configuration concentrates the force at the crestal bone at the site of loading with limited distribution to the remaining implants. Differential mobility concentrates the force distribution to the bone support of the most rigid members of splinted natural teeth or to the implants when they are united with natural teeth in a combined prosthesis. Implants always support the natural teeth and never the other way around. Therefore a nonrigid attachment is recommended between a tooth-supported prosthesis and an implant-supported prosthesis when they are combined. However, when implants are interspersed with natural teeth in the same prosthesis, the restoration will be implant borne. This requires special force distribution analysis to prevent implant overload.     

The use of transitional implants for immediate fixed temporary prostheses in cases of implant restorations

While the original Br?nemark implant protocol has continued to evolve, the avoidance of implant loading during osseointegration remains a prerequisite with all implant systems. Immediately loaded transitional implants have recently been developed to support the fabrication of a fixed provisional prosthesis that provides implant patients with improved aesthetics and function during the osseointegration period. In this manner, osseointegration can occur free from prosthetic and transmucosal loads. This article describes the use of transitional implants and presents a classification of three different case types.     

Permanent endoprostatic prostheses in patient with obstruction caused by benign hyperplasia of the prostate

Presentation of the results obtained using the intraprostatic prosthesis UroLume in 78 patients wit BPH obstruction, 69 of which presented high surgical risk (ASA IV). Mean age was 79.8 years (r: 62-93). All patients carried urethral catheters, except 4 (5.1%) who had a provisional metal coil that required replacement. Prosthesis were implanted successfully in 72 cases (93.3%). The most significant exclusion criterion was an excessive length of prostate urethra. Mean follow-up was 15.3 months (r: 3-38). Mean maximum flow at 1 year after implant was 12.7 mL/sec; mean symptoms score (I-PSS score) was 6.2 points and in most prosthesis, epithelization had taken place. Three patients required implant of another prosthesis, either during the same surgical procedure (1 case) or later due to retention or dysuria (2 cases). Due to acute urine retention (AUR) during the immediate postoperative, resection of the middle lobe was performed in one case while a second case required late resection of intraluminal hyperplastic tissue. Three patients (4.1%) had haematuria that forced hospital admission some months after the implant, and three cases (4.1%) required removal of the prosthesis; at patient's request (1 case), due to calcification (1 case) and for stress incontinence (1 case). After a follow-up of over three years, it can be concluded that the UroLume prosthesis is an effective alternative to TUR in patients at high surgical risk.     

Acute liver failure

PURPOSE: This article reviews the literature on radiographic imaging techniques and image interpretation for dental implant treatment. MATERIALS AND METHODS: MEDLINE was used to identify published peer-reviewed literature for this report. RESULTS: Radiographic images are indispensable in the evaluation of osseous structures when planning treatment for dental implants. Potential bone sites for implant placement can be assessed clinically by means of palpation or probing through the mucosa; however, diagnostic imaging provides the best means for indirectly measuring bone dimensions. After healing of the implant site, the application of radiology is useful to verify the amount of bone adjacent to the implant and that the transmucosal abutments fit the implant. Upon completion of the implant prosthesis, radiology may be used to monitor initial and long-term success of implant treatment. CONCLUSION: Recommendations for the application of radiology over the course of treatment are made for various implant cases ranging from the overdenture to the single-tooth implant.     

Calcitonin, as SMS 201-995, ameliorates the VIPoma syndrome

Due to the presence of the stiff prosthetic stem fitted in the medullary canal during total hip replacement, the surrounding cortex of the femur changes its density over time. This bone remodelling takes place with every type of total hip prosthesis; however, its intensity may vary between prostheses and patients. In the worst cases this process can lead to the late failure of the implant. To monitor such bone density evolution, we are developing a tailored Computer-aided Densitometric Image Analysis system (the major part of this our system uses an 8-bit commercial hardware with 256 levels of grey). The equivalent dynamic range of an X-ray picture is about 10 bits. In this paper we present a method to overcome these hardware limitations by improving the software. Using a double-exposure acquisition it is possible to build a 9-bit image that is good enough for most applications involving bone density measurement.     

Stability of proximal femoral grafts in canine hip arthroplasty

In a canine model, the fixation stability of a prosthesis and proximal bone graft composite were measured relative to the distal femur. One group had the prosthesis graft composite cemented into the distal femur. The second group had the prosthesis graft composite press fit into the distal femur for biologic ingrowth. Displacements of the proximal femoral grafts relative to the host bone in each group were measured after ex vivo (acute with graft) implantation and 4 months after implantation. A third group with no osteotomy (acute intact) simulated perfect graft to host bone union. Relative displacements representing 6 degrees freedom (translation and rotation) were calculated from the displacement values measured by 9 eddy current transducers. Measurements of displacement were used to test the hypothesis that distal press fit fixation equals distal cement fixation at 4 months after implantation. In all cases the measured translations and rotations of the graft to implant construct were small and of a magnitude that should encourage bone ingrowth (< 0.05 mm and < 0.1 degree, respectively). The stability of the press fit group at 4 months was not significantly different from the cemented group in axial and transverse displacement during axial and transverse loading, respectively. There was no difference in stabilities at 4 months between distal press fit and cemented fixation in hip replacements requiring a proximal femoral graft.     

Reoperation for failed prosthetic replacement used for limb salvage

Patients with segmental bone and joint replacement prostheses because of tumors increasingly need revision surgery because of their long term survival. Between 1970 and 1990, 208 custom prosthetic replacements were performed for limb salvage in patients with tumors. Reoperations were required in 52 patients. The mean time to reoperation was 37 months. The reoperation procedures included 35 prosthetic revisions, 11 amputations, four arthrodeses, one vascularized fibular graft, and one open reduction and internal fixation of a fracture with supplemental bone graft. Functional assessment using the new Musculoskeletal Tumor Society scoring system was available for the 36 living patients, and their mean rating was 63% (18.9) at 12 years' mean followup. Of the 35 patients who received a new prosthesis, 12 (33%) patients needed a third operation at mean followup of 68 months. The probability of prosthetic survival in the group of 35 patients needing revision to the same or another prosthesis was 79% at 5 years and 65% at 10 years. The chance and frequency of needing reoperation increased as patients survived longer. Reoperations for tumor recurrence or infection usually resulted in amputation. Reoperation for failed initial segmental bone and joint prosthetic replacement is feasible and effective and can be done without jeopardizing subsequent patient and implant survival or without significantly affecting functional results compared with the values before reoperation.     

Mechanical considerations for the implant tooth-supported fixed partial denture

The implant tooth-supported fixed partial denture presents a biomechanical design problem, because the implant is rigidly fixed within the alveolus, and the tooth is surrounded by a periodontal ligament that allows movement. Nonrigid fixed partial denture designs are advocated by some dentists as a method of compensating for this differential movement. Rigid fixed partial denture designs, however, are advocated by many clinicians. Studies have failed to show the advantage of one design over the other. This study developed an in vitro method for testing such prosthesis designs and measured movement of a natural tooth abutment during simulated function. The movement of the natural tooth abutment was not found to change substantially with the fixed partial denture designs tested.     

The application of deproteinized bovine bone mineral for ridge preservation prior to implantation. Clinical and histological observations in a case report

Alveolar ridge preservation following tooth extraction is important when implant-supported oral rehabilitation is considered. The ability to maintain the ridge allows implant placement in an ideal position, fulfilling both functional and esthetic demands. A deproteinized bovine bone mineral (DBBM) was used as a socket site filler material to maintain ridge configuration, without applying an occlusive membrane. The material was grafted and packed onto the socket sites immediately after extractions, and subsequently primary soft tissue closure was attempted. The ridge healed for 9 months before the second surgical procedure, in which the implant was placed. New bone formation was observed in all histological specimens. DBBM particles adhered to a highly osteocyte-rich woven and lamellar-type bone. Clinically and histologically, this report demonstrated DBBM particles to be an effective biocompatible filler agent in extraction sockets for ridge preservation prior to titanium fixture implantation. Randomized controlled clinical trials are needed to fully evaluate the usefulness of this material in ridge preservation after tooth extraction.