Natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) blends

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber using potassium persulfate as an initiator was carried out by emulsion polymerization. The rubber macroradicals reacted with MMA to form graft copolymers. The morphology of grafted natural rubber (GNR) was determined by transmission electron microscopy and it was confirmed that the graft copolymerization was a surface‐controlled process. The effects of the initiator concentration, reaction temperature, monomer concentration, and reaction time on the monomer conversion and grafting efficiency were investigated. The grafting efficiency of the GNR was determined by a solvent‐extraction technique. The natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) (NR‐g‐MMA/PMMA) blends were prepared by a melt‐mixing system. The mechanical properties and the fracture behavior of GNR/PMMA blends were evaluated as a function of the graft copolymer composition and the blend ratio. The tensile strength, tear strength, and hardness increased with an increase in PMMA content. The tensile fracture surface examined by scanning electron microscopy disclosed that the graft copolymer acted as an interfacial agent and gave a good adhesion between the two phases of the compatibilized blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 428–439, 2001     

Optical and thermal properties of methyl methacrylate and pentafluorophenyl methacrylate copolymer: Design of copolymers for low-loss optical fibers for gigabit in-home communications

As a novel base material for low-loss graded index plastic optical fibers (GI POFs) in gigabit home networks, a copolymer of methyl methacrylate (MMA) and pentafluorophenyl methacrylate (PFPMA) was prepared and its thermal and optical properties were investigated. When the PFPMA content in the monomer feed was 0-50 mol%, both the glass transition temperature (T_g) and the decomposition temperature of the copolymer were higher than that for PMMA, which is the base material for many commercially available POFs. The transmittance of the copolymer was also found to be higher than that of PMMA since it has fewer C-H bonds per unit volume. As the core material of GI POFs, MMA-co-PFPMA (65/35 mol%), which had the highest T_g of 118 °C was utilized. A low-loss GI POF with an attenuation of 172-185 dB/km at the emission wavelengths of a high-speed light source (670-680 nm) was successfully obtained for the first time.     

Investigation on the miscibility of the blends of poly(methyl methacrylate) and poly(styrene‐co‐acrylonitrile)

The miscibility was investigated in blends of poly(methyl methacrylate) (PMMA) and styrene‐acrylonitrile (SAN) copolymers with different acrylonitrile (AN) contents. The 50/50 wt % blends of PMMA with the SAN copolymers containing 5, 35, and 50 wt % of AN were immiscible, while the blend with copolymer containing 25 wt % of AN was miscible. The morphologies of PMMA/SAN blends were characterized by virtue of scanning electron microscopy and transmission electron microscopy. It was found that the miscibility of PMMA/SAN blends were in consistence with the morphologies observed. Moreover, the different morphologies in blends of PMMA and SAN were also observed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Surface modification of polymethyl methacrylate by graft copolymers

Summary Graft copolymers composed of poly(methyl methacrylate) branches and different backbones of poly(fluoroalkyl acrylate(FA)-co-methyl methacrylate(MMA)), poly (hydroxyethyl methacrylate(HEMA)-co-MMA), and poly(FA-co-HEMA) were prepared by macromonomer technique to study their application as a surface modifier for PMMA films. Contact angle of water droplet on PMMA film specimens containing various amounts of these graft copolymers cast on glass slides from THF solution was found to change considerably with the graft copolymer concentration, depending on their backbone component. And there was considerable difference in contact angle between air and glass side of the film surfaces. These results were considered in terms of the surface accumulation of graft copolymers during the solvent evaporation.     

Restraining the aggregation of poly(9,9‐dihexylfluorene) by crosslinked poly(methyl methacrylate) networks

A crosslinked network was used to restrain undesired interchain aggregation of fluorescent polymers in this study. Primarily, solutions of poly(9,9‐dihexylfluorene) (PF) in toluene and in curable liquid monomer mixtures of methyl methacrylate (MMA) and ditrimethylolproane tetracrylate (DTTPT) were compared to study the effect of concentration on absorption and emission behaviors. Results from ultraviolet–visible absorption, photoluminescence (PL) emission, and PL excitation reveal that the degree of aggregation depended strongly on the concentration and was correlated to the size of the polymer coil as determined from light scattering. Solutions of known PF content in MMA/DTTPT were then photoirradiated to yield PF/crosslinked poly(methyl methacrylate) (X‐PMMA) composite films. Comparison among the pure PF, PF/MMA/DTTPT mother liquid, and PF/X‐PMMA solid composites were then conducted to evaluate the effect of crosslinking on the degree of aggregation. With small amounts of imbedded PF (0.0015 wt %), the PF/X‐PMMA composite had a PL quantum yield (0.70) higher than the pure PF (0.65) itself. Most notably, the PF/X‐PMMA composites after annealing at 120 and 200°C for 5 h still retained a reasonable emission efficiency (with related PL quantum yields of 0.61 and 0.43), in contrast to the large PL quantum yield reductions to 0.32 and 0.19 for the annealed PFs after the same treatment. Suggestively, interchain aggregation during a high‐temperature annealing process can be largely inhibited by the surrounding crosslinked network matrix. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Preparation of highly syndiotactic block copolymers of methyl methacrylate and lauryl methacrylate and their characterization

Summary Highly syndiotactic diblock and triblock copolymers comprising lauryl methacrylate (LMA) and methyl methacrylate (MMA) with narrow molecular weight distributions were prepared by the living anionic polymerization with t-C₄H₉Li/(C₂H₅)₃Al in toluene at low temperature. The block copolymers were soluble in acetone which is a non-solvent for poly(lauryl methacrylate) (PLMA). ¹HNMR and vapor pressure osmometric analyses of the block copolymers indicated the aggregation of the copolymer in acetone through the interaction between PLMA blocks. Stereocomplex formation between the triblock copolymer and isotactic poly(methyl methacrylate) (PMMA) took place more effectively in solution than in the solid state.     

Poly(methyl methacrylate)–epoxy vitrimer composites

In this study, we synthesized poly(methyl methacrylate) (PMMA) epoxy vitrimer composites by doping methyl methacrylate (MMA) and benzoyl peroxide into a curing system of epoxy resin and citric acid. The vitrimer composites were characterized with dynamic mechanical thermal analysis, scanning electron microscopy, and stress‐relaxation and lap‐shear testing. The test results show that with increasing amount of MMA, the existence of PMMA in the epoxy vitrimer matrix in the form of intermiscible, slightly soluble, and phase separation became more evident. When the doping amount of PMMA reached 10–25 wt %, the bonding strength of the PMMA–epoxy vitrimer composites was about two times that of the epoxy vitrimer (from 2.3 to 4.3 MPa). This showed that the self‐healing strength of the vitrimer composites was better than that of the pure vitrimer. When the PMMA in the epoxy matrix was in a slightly soluble form, the linear PMMA improved the mechanical properties of the epoxy vitrimer by physical winding. At the same time, the doping of PMMA promoted the transesterification rate of the epoxy vitrimer and enhanced the bonding strength of the composites without lowering the epoxy vitrimer glass‐transition temperature. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46307.     

Synthesis of methyl methacrylate and N‐aryl itaconimide block copolymers via atom‐transfer radical polymerization

The paper describes the synthesis of block copolymers of methyl methacrylate (MMA) and N‐aryl itaconimides using atom‐transfer radical polymerization (ATRP) via a poly(methyl methacrylate)–Cl/CuBr/bipyridine initiating system or a reverse ATRP AIBN/FeCl₃·6H₂O/PPh₃ initiating system. Poly(methyl methacrylate) (PMMA) macroinitiator, ie with a chlorine chain‐end (PMMA‐Cl), having a predetermined molecular weight (M_n = 1.27 × 10⁴ g mol^?1) and narrow polydispersity index (PDI = 1.29) was prepared using AIBN/FeCl₃·6H₂O/PPh₃, which was then used to polymerize N‐aryl itaconimides. Increase in molecular weight with little effect on polydispersity was observed on polymerization of N‐aryl itaconimides using the PMMA‐Cl/CuBr/Bpy initiating system. Only oligomeric blocks of N‐aryl itaconimides could be incorporated in the PMMA backbone. High molecular weight copolymer with a narrow PDI (1.43) could be prepared using tosyl chloride (TsCl) as an initiator and CuBr/bipyridine as catalyst when a mixture of MMA and N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 was used. Thermal characterization was performed using differential scanning calorimetry (DSC) and dynamic thermogravimetry. DSC traces of the block copolymers showed two shifts in base‐line in some of the block copolymers; the first transition corresponds to the glass transition temperature of PMMA and second transition corresponds to the glass transition temperature of poly(N‐aryl itaconimides). A copolymer obtained by taking a mixture of monomers ie MMA:N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 showed a single glass transition temperature. Copyright © 2005 Society of Chemical Industry     

Synthesis and characterization of diblock,triblock, and multiblock copolymers containing poly(3‐hydroxy butyrate) units

A poly[(R,S)‐3‐hydroxybutyrate] macroinitiator (PHB‐MI) was obtained through the condensation reaction of poly[(R,S)‐3‐hydroxybutyrate] (PHB) oligomers containing dihydroxyl end functionalities with 4,4′‐azobis(4‐cyanopentanoyl chloride). The PHB‐MI obtained in this way had hydroxyl groups at two end of the polymer chain and an internal azo group. The synthesis of ABA‐type PHB‐b‐PMMA block copolymers [where A is poly(methyl methacrylate) (PMMA) and B is PHB] via PHB‐MI was accomplished in two steps. First, multiblock active copolymers with azo groups (PMMA‐PHB‐MI) were prepared through the redox free‐radical polymerization of methyl methacrylate (MMA) with a PHB‐MI/Ce(IV) redox system in aqueous nitric acid at 40°C. Second, PMMA‐PHB‐MI was used in the thermal polymerization of MMA at 60°C to obtain PHB‐b‐PMMA. When styrene (S) was used instead of MMA in the second step, ABCBA‐type PMMA‐b‐PHB‐b‐PS multiblock copolymers [where C is polystyrene (PS)] were obtained. In addition, the direct thermal polymerization of the monomers (MMA or S) via PHB‐MI provided AB‐type diblocks copolymers with MMA and BCB‐type triblock copolymers with S. The macroinitiators and block copolymers were characterized with ultraviolet–visible spectroscopy, nuclear magnetic resonance spectroscopy, gel permeation chromatography, cryoscopic measurements, and thermogravimetric analysis. The increases in the intrinsic viscosity and fractional precipitation confirmed that a block copolymer had been obtained. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1789–1796, 2004     

Effect of structure and composition on physico-mechanical properties of methyl methacrylate/alkyl (meth)acrylate copolymers

The paper describes the fabrication of cast acrylic sheets by copolymerizing a prepolymer syrup of methyl methacrylate (MMA) with varying amounts (1-20 wt.-%) of 2-ethylhexyl methacrylate (EHMA), n-hexyl methacrylate (HMA), 2-ethylhexyl acrylate (EHA) and n-hexyl acrylate (HA). The effect of structure of copolymer on light transmittance, density and mechanical properties was evaluated. Tensile strength and storage modulus decreased with increasing comonomer content. Strain increased significantly in the case of MMA/EHA and MMA/HA copolymer sheets having 15 and 20 wt.-% of comonomer. Softening temperature of copolymer samples was determined using dynamic mechanical thermal analysis. Heat deflection temperature under flexural load and softening temperature decreased with increasing comonomer content in copolymer.     

Interactions in poly(vinylidene fluoride)/poly(methyl methacrylate-co-ethyl methacrylate) blends

Summary The interaction parameters B for blends of poly(vinylidene fluoride) (PVDF) with poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA) and five methyl methacrylate/ ethyl methacrylate copolymers (PMEMA) were determined by measurements of melting point depression of PVDF. The B values are negative, indicating an attractive intermolecular interaction. The intramolecular interaction parameter between MMA and EMA segments in PMEMA was found to be +3.25 cal/cm³, indicating a repulsive interaction between different monomer segments in the copolymer.     

Synthesis and characterization of butyl acrylate/methyl methacrylate/glycidyl methacrylate latexes

The butyl acrylate (BA)/methyl methacrylate (MMA), and glycidyl methacrylate (GMA) composite copolymer latex was synthesized by seeded emulsion polymerization technique taking poly(methyl methacrylate) (PMMA) latex as the seed. Four series of experiments were carried out by varying the ratio of BA : MMA (w/w) (i.e. 3.1 : 1, 2.3 : 1, 1.8 : 1, and 1.5 : 1) and in each series GMA content was varied from 1 to 5% (w/w). The structural properties of the copolymer were analyzed by FTIR, ¹H‐, and ¹³C‐NMR. Morphological characterization was carried out using transmission electron microscopy (TEM). In all the experiments, monomer conversion was ～99% and final copolymer composition was similar to that of feed composition. The incorporation of GMA into the copolymer chain was confirmed by ¹³C‐NMR. The glass transition temperature (T_g) of the copolymer latex obtained from the differential scanning calorimetry (DSC) curve was comparable to the values calculated theoretically. With increase in GMA content, particles having core‐shell morphology were obtained, and there was a decrease in the particle size as we go from 2–5% (w/w) of GMA. The adhesive strength of the latexes was found to be dependent on the monomer composition. With increase in BA : MMA ratio, the tackiness of the film increased while with its decrease the hardness of the film increased. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Design and synthesis of zero–zero-birefringence polymers in a quaternary copolymerization system

We designed and synthesized quaternary copolymers of methyl methacrylate (MMA), 2,2,2-trifluoroethyl methacrylate (TFEMA), benzyl methacrylate (BzMA), and 3,3,5-trimethylcyclohexyl methacrylate (TMCHMA) and we investigated their birefringence, thermal properties, and other optical properties. When the copolymer composition was MMA/TFEMA/BzMA/TMCHMA = 50:38:8:4, 40:30:7:23, or 30:21:7:42 (wt%), a zero–zero-birefringence polymer that exhibited neither orientational nor photoelastic birefringence was obtained. We demonstrated that such zero–zero-birefringence polymers with a variety of compositions could be successfully prepared in the quaternary system by using the same compensation method as applied in ternary random copolymerization. We also demonstrated that the glass-transition temperature (T_g) and refractive index (n_D) of these copolymers could be controlled with high accuracy while retaining their zero–zero-birefringence property. We can therefore predict the type of birefringence, the T_g, and the n_D of a particular copolymer before polymerization. Zero–zero-birefringence polymers with the most appropriate characteristics can then be synthesized selectively by quaternary copolymerization.     

Octadecyl acrylate - Methyl methacrylate block and gradient copolymers from ATRP: Comb-like stabilizers for the preparation of micro- and nano-particles of poly(methyl methacrylate) and poly(acrylonitrile) by non-aqueous dispersion polymerization

Three random and three block copolymers of methyl methacrylate (MMA) and octadecyl acrylate (ODA) were synthesized by atom transfer radical polymerization. These copolymers were assessed for their application as stabilizers in the one-step non-aqueous dispersion (NAD) polymerization of MMA and of acrylonitrile (AN) in a non-polar solvent mixture of hexane and dodecane. In all cases stable spherical micro-particle colloidal dispersions were formed with particle diameters in the range of 62-2725 nm for PMMA. Uniform monodisperse PMMA particles with standard deviations in size distributions of less than 5% were obtained in two cases demonstrating the utility of ODA:MMA copolymers as replacement preformed stabilizers in the one-step synthesis of MMA micro-spheres. Overall the block copolymer PMMA₆₄-block-PODA₃₆ gave greater control over size when varying the solvent:monomer ration than a related gradient PMMA-PODA copolymer. These copolymers were further used as stabilizers in the one-step NAD polymerization of MMA with ethylene glycol dimethacrylate (EGDMA) under similar conditions allowing for the preparation of monodisperse cross-linked PMMA particles with diameters ranging from 110 to 1700 nm. The general utility of the copolymers as stabilizers was demonstrated by the NAD polymerization of acrylonitrile (AN) in non-polar solvent mixture of hexane and dodecane giving ‘crumpled’ latex dispersions with particle diameters in the range 85-483 nm.     

Effect of cardinyl acrylate on thermal behavior of methyl methacrylate copolymers

Cardinyl acrylate (CA), prepared by the reaction of acryloyl chloride and cardinol, was copolymerized with methyl methacrylate (MMA) in bulk at 80°C using 2% benzoyl peroxide as an initiator. The copolymer composition was determined by ¹H-NMR spectroscopy. Three copolymer samples containing 0.0048–0.0838 mol fraction of cardinyl acrylate were obtained. A significant improvement in the thermal stability of MMA was observed by incorporating 0.0048–0.0838 mol fraction of CA in the backbone. The activation energy for decomposition in the temperature range 350–480°C for copolymers was higher than PMMA. © 1992 John Wiley & Sons, Inc.     

The effect of the addition of poly(styrene‐co‐glycidyl methacrylate) copolymer on the properties of polylactide/poly(methyl methacrylate) blend

The effect of the addition of poly(styrene‐co‐glycidyl methacrylate) P(S‐co‐GMA) copolymer on the properties of melt blended polylactide/poly(methyl methacrylate) (PLA/PMMA) 80/20 (wt %) composition was studied. In the literature high ductility levels were achieved by melt blending PLA with different additives. However, the gained ductility was counter balanced with drastic drops in strength and modulus values. The novelty of this work was the preparation of PLA‐based blends with polylactide content higher than 75 wt % which showed an impact resistance value improvement of about 60% compared with the neat PLA and maintained similar tensile strength and modulus values as well as glass transition temperature to neat PLA. The addition of only 3 pph of copolymer to PLA/PMMA blend improved the impact resistance almost 100%. The chemical reaction between PLA/PMMA blend and P(S‐co‐GMA) copolymer were analyzed by FTIR, rotational rheometry, and GPC/SEC. Phase structure and morphology were studied by Differential Scanning Calorimetry and Scanning Electronic Microscopy. Tensile and impact properties as well as thermal stability were also studied. Results showed that as the amount of copolymer in the blend was increased then higher was average molecular weight and polydispersity index. After the addition of P(S‐co‐GMA) copolymer to the PLA/PMMA blend the impact resistance, elongation at break and thermal stability were improved while tensile strength and elastic modulus remained almost unaltered. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43935.     

Effect of methyl methacrylate on the properties of transparent flame retardant unsaturated phosphate ester copolymer

The effect of methyl methacrylate (MMA) on the properties of transparent flame retardant unsaturated phosphate ester copolymer (poly[UPE‐co‐MMA]) prepared by bulk polymerization technique was investigated. Fourier transform infrared spectra, gel fraction (G) test, and dynamic mechanical analysis revealed the structure and crosslinking density of poly(UPE‐co‐MMA) copolymers. The thermal degradation and flame retardancy of copolymers were indicated by thermogravimetric analysis, limiting oxygen index (LOI), and microscale combustion calorimeter (MCC) test. Besides, the mechanical properties and transparency were tested with testing machines and solid ultraviolet absorption spectra. As the MMA content increased to 50%, the copolymer contained 50 wt% MMA showed the maximal G (88.93%) and transmittance was up to 91.72%. From the poly(UPE‐co‐MMA) copolymers, the tensile strength increased from 14.62 to 26.95 MPa, assigned to the increase of crosslinking density of copolymers. The char yield of poly(UPE‐co‐MMA) was up to 21.18 wt%, which was a result of decomposition of phosphate groups, producing a phosphorus‐rich layer that increased the thermal stability of the residues. LOI and MCC results confirm that the introduction of MMA can retain the flame retardancy of copolymer remarkably. POLYM. ENG. SCI., 59:2103–2109, 2019. © 2019 Society of Plastics Engineers     

Synthesis and characterization of poly[4‐(2‐thiazolylazo)phenyl methacrylate]‐co‐poly(methyl methacrylate)

A new methacrylic monomer, 4‐(2‐thiazolylazo)phenylmethacrylate (TPMA) was synthesized. Copolymerization of the monomer with methyl methacrylate (MMA) was carried out by free radical polymerization in THF solution at 70 ± 0.5°C, using azobisisobutyronitrile (AIBN) as an initiator. The monomer TPMA and the copolymer poly(TPMA‐co‐MMA) were characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (NMR), and elemental analysis methods. The polydispersity index of the copolymer was determined using gel permeation chromatography (GPC). Thermogravimetric analysis (TGA) of the copolymer performed in nitrogen revealed that the copolymer was stable to 270°C. The glass transition temperature (T_g) of the copolymer was higher than that of PMMA. The copolymer with a pendent aromatic heterocyclic group can be dissolved in common organic solvents and shows a good film‐forming ability. Both the monomer TPMA and the copolymer poly (TPMA‐co‐MMA) have bright colors: orange and yellow, respectively. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2152–2157, 2007     

Preparation of polystyrene/poly(methyl methacrylate) core‐shell composite particles by suspension‐emulsion combined polymerization

Suspension‐emulsion combined polymerization process, in which methyl methacrylate (MMA) emulsion polymerization constituents (EPC) were drop wise added to styrene (St) suspension polymerization system, was applied to prepare polystyrene/poly(methyl methacrylate) (PS/PMMA) composite particles. The influences of the feeding condition and the composition of EPC on the particle feature of the resulting composite polymer particles were investigated. It was found that PS/PMMA core‐shell composite particles with a narrow particle size distribution and a great size would be formed when the EPC was added at the viscous energy dominated particle formation stage of St suspension polymerization with a suitable feeding rate, whereas St‐MMA copolymer particles or PS/PMMA composite particles with imperfect core‐shell structure would be formed when the EPC was added at the earlier or later stage of St suspension polymerization, respectively. It was also showed that the EPC composition affected the composite particles formation process. The individual latex particles would exist in the final product when the concentrations of MMA monomer, sodium dodecyl sulfate emulsifier, and potassium persulfate initiator were great in the EPC. Considering the feature of St suspension polymerization and the morphology of PS/PMMA composite particles, the formation mechanism of PS/PMMA particles with core‐shell structure was proposed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nanostructured polymer blends based on polystyrene‐b‐polybutadiene‐b‐poly(methyl methacrylate) triblock copolymers modified with polystyrene and/or poly(methyl methacrylate) homopolymers

Morphologies of polymer blends based on polystyrene‐b‐ polybutadiene‐b ‐poly(methyl methacrylate) (SBM) triblock copolymer were predicted, adopting the phase diagram proposed by Stadler and co‐workers for neat SBM block copolymer, and were experimentally proved using atomic force microscopy. All investigated polymer blends based on SBM triblock copolymer modified with polystyrene (PS) and/or poly(methyl methacrylate) (PMMA) homopolymers showed the expected nanostructures. For polymer blends of symmetric SBM‐1 triblock copolymer with PS homopolymer, the cylinders in cylinders core?shell morphology and the perforated lamellae morphology were obtained. Moreover, modifying the same SBM‐1 triblock copolymer with both PS and PMMA homopolymers the cylinders at cylinders morphology was reached. The predictions for morphologies of blends based on asymmetric SBM‐2 triblock copolymer were also confirmed experimentally, visualizing a spheres over spheres structure. This work presents an easy way of using PS and/or PMMA homopolymers for preparing nanostructured polymer blends based on SBM triblock copolymers with desired morphologies, similar to those of neat SBM block copolymers. © 2017 Society of Chemical Industry