Graft copolymerization of vinyl monomers on modified cottons XV. Initiation by decomposition of aryl diazonium groups

Cellulose bearing aromatic amino groups was prepared by reacting cellulose with 2,4-dichloro-6-(p-nitroaniline)-s-triazine in presence of alkali followed by subsequent reduction of the nitro groups to amino groups. The latter were diazotized and grafting was achieved without homopolymer contamination through decomposition of the cellulose diazonium salt under the effect of metal ions. The dependence of grafting on the nature of the monomers was governed by the pH of the polymerization medium, reaction temperature and concentration of emulsifier. Using a large liquor ratio decreased the graft yield. The cellulose macroradical formed via decomposition of the diazo group was found very effective in inducting methyl methacrylate, ethyl methacrylate, isopropyl methacrylate, butyl methacrylate, isopentyl methacrylate, acrylamide and 2-methyl-5-vinyl pyridine.     

Graft copolymerization of vinyl monomers on modified cotton. IV. Ceric-induced grafting on vinyl monomers on cellulose bearing different substituents

The influence of introducing various functional groups into the cellulose molecule on its susceptibility toward grafting with vinyl monomers such as acrylonitrile and methyl methacrylate using the Ce(IV)–cellulose redox system was studied. While cellulose bearing either cyanoethyl or carboxymethyl groups showed higher graft yields, cellulose bearing both groups showed lower yields. Presence of acrylamidomethyl groups in the cellulose molecule reduced its reactivity to grafting. The same holds true for cellulose bearing acrylamidomethyl groups along with carboxymethyl groups. On the other hand, introducing carbamoylethyl groups in the cellulose molecule enhances significantly the susceptibility of cellulose toward grafting. This is also observed with cellulose bearing cyanoethyl and carboxyethyl groups. Treating cellulose with N-methylolacrylamide in alkaline medium seems to produce a crosslinked cellulose with lower reactivity to grafting. The results obtained with the different substrates were discussed on the basis of the change in the physical and/or chemical structure of cellulose brought about during its modification as well as on the nature of the substituent groups introduced. The mode of Ce(IV) attack on cellulose was also clarified.     

Graft copolymerisation of vinyl monomers on modified cottons. VII. Grafting by chain transfer

Grafting of methyl methacrylate on cellulosic materials by chain transfer under the catalytic influence of azobisisobutyronitrile (AIBN) was extensively studied. The graft yield is influenced by reaction time, temperature, monomer and initiator concentration, reaction medium and nature of the substrate. In general, the grafting reaction shows an induction period after which the polymerisation proceeds rapidly. The graft yield increases and the induction period decreases by rising the reaction temperature from 50 to 70°C. This is also the case when the monomer concentration was increased from 2 to 6%. Increasing the AIBN concentration up to 0.01 M causes a significant enhancement in grafting while further increase brings about a marked fall in the graft yield. Among the reaction media studied, a water/solvent mixture containing 25% of either methanol, ethanol, propanol, butanol or acetone seems to constitute a reaction medium where the monomer and initiator are completely miscible and the swelling of cellulose by water is not hindered by the presence of these solvents. Increasing the solvent ratio in the water/solvent mixture causes a considerable decrease in the graft yield. The polymer content of the cellulosic materials, i. e. the graft yield, follows the order: partially carboxymethylated cotton > cotton treated with 12N sodium hydroxide > cyanoethylated cotton > cotton treated with 0.5 N sodium hydroxide > purified cotton. In addition, proof of grafting was provided by the fractional precipitation method.     

Graft copolymerization of vinyl monomers onto chitin with cerium (IV) ion

Graft copolymerization of vinyl compounds onto chitin was studied, and an efficient and reproducible procedure has been established, cerium (IV) being used as the initiator. The reactions with acrylamide and acrylic acid onto powdery chitin were carried out under various conditions to elucidate the polymerization behavior in terms of grafting percentage. The amount of cerium (IV) affected the polymerization most strikingly, and grafting percentages showed maxima with suitable amounts of initiator for both the monomers. As a solvent water proved to be superior to aqueous nitric acid except the reaction with a small amount of initiator. Under appropriate conditions, around 240 and 200% grafting percentages were achieved for acrylamide and acrylic acid, respectively. The resulting graft copolymers showed much improved affinity for solvents and hygroscopicity compared to the original chitin.     

Graft copolymerization of vinyl monomers on modified cottons. III. Grafting of acrylonitrile and methyl methacrylate on cyanoethylated cotton by the ceric ion method

The interaction of acrylonitrile and methyl methacrylate with cyanoethylated cotton in the presence of ceric ion has been studied under a variety of conditions. Increasing the reaction time, the monomer concentration, and the temperature favorably influences the degree of grafting. The same holds true for initiator concentration up to a certain limit, after which a decrease in the graft yield was obtained. On the other hand, ceric consumption during grafting and oxidation increases by increasing the magnitudes of all these factors. However, the consumption during grafting is always higher than that during oxidation. The graft yields obtained with cyanoethylated cotton are greater than those of the control, being increased by increasing the degree of substitution (D.S.) of the cyanoethylated cotton, suggesting that the cyanoethyl groups afford additional sites of grafting. On the other hand, the ceric consumption during oxidation of cyano-ethylated cotton was much lower than that of the control, being increased also by increasing the D.S., indicating perhaps that ceric ion attacks the cyanoethylated cotton exclusively at the cyanoethyl groups. Based on these findings, a scheme for the mechanism of reaction of a vinyl monomer with cyanoethylated cotton was proposed.     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatonickelate(IV)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) with a potassium diperiodatonickelate(IV) [Ni(IV)]–PVA redox system as an initiator was investigated in an alkaline medium. The grafting parameters were determined as functions of the temperature and the concentrations of the monomer and initiator. The structures of the graft copolymers were confirmed by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction, differential scanning calorimetry, and thermogravimetric analysis. The Ni(IV)–PVA system was found to be an efficient redox initiator for this graft copolymerization. A single‐electron‐transfer mechanism was proposed for the formation of radicals and the initiation. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate, n‐butyl acrylate, and n‐butyl methacrylate, were used as reductants for graft copolymerization. These reactions definitely occurred to some degree. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 529–534, 2003     

Graft copolymerization of vinyl monomers on cellulosic materials

Graft copolymers of acrylonitrile, ethyl acrylate, methyl acrylate, ethyl methacrylate and methyl methacrylate and of acrylonitrile/ethyl methacrylate and acrylonitrile/methyl methacrylate monomer mixtures on carboxymethylcellulose (degree of substitution 0.4–0.5) were prepared by use of ceric ion initiator in aqueous medium. The extent of graft polymer formation was measured in terms of graft level, molecular weight of grafted polymer chains and frequency of grafting as function of ceric ion concentration. It was found that at comparable reaction conditions, the molecular weight and frequency of grafting were not of the same order of magnitude. For the monomer mixtures, the copolymer compositions obtained from the total nitrogen content of the acrylonitrile/alkyl methacrylate copolymer samples showed that a relativity low amount of the acrylonitrile monomeric units were incorporated into the graft copolymer even at high acrylonitrile content of the feed.     

Graft copolymerization of vinyl monomers onto modified cottons. VIII. Dimethylaniline–benzyl chloride-induced grafting of methyl methacrylate onto partially carboxymethylated cotton

The feasibility of dimethylaniline (DMA)–benzyl chloride (BC) mixture to initiate graft polymerization of methyl methacrylate (MMA) onto partially carboxymethylated cotton was examined. The graft yield depends on the nature of the solvent used along with water; ethanol proved to be the best at a water;ethanol ratio of 90:10. Considerable grafting occurred in the presence of acetic acid at a concentration of 200 mmol/l. Higher concentrations of this acid decrease grafting significantly. The graft yield obtained in the presence of formic acid was much lower than that obtained in the presence of acetic acid. Inclusion of hydrochloric or sulfuric acid in the graft polymerization system prevent grafting. A DMA–BC mixture at a concentration of 0.08:0.087 mole/l. constitutes the optimal concentration for grafting. This contrasts with 0.32:0.35 mole/l. for total conversion. The rate of grafting increases by raising the polymerization temperature; it follows the order 50°>60°>65°>70°>75°C. Furthermore, increasing the monomer concentration caused a significant enhancement in the graft yield and total conversion.     

Graft copolymerization onto Tamarind Kernel Powder: Ceric(IV)‐initiated graft copolymerization of acrylonitrile

Tamarind Kernel Powder (TKP) is derived from the seeds of Tamarindus indica Linn., a common and most important tree of India. It is extensively used in cotton sizing, as a wet‐end additive in the paper industry, as a thickening, stabilizing, and gelling agent in the food industry. However, because of its fast biodegradability there is a need to prepare graft copolymers of TKP. The graft copolymerization of acrylonitrile (AN) onto TKP with ceric ammonium nitrate as a redox initiator in an aqueous medium has been studied. The reaction conditions were optimized to afford maximum percent grafting and percentage grafting efficiency of AN onto TKP, which was found to be 86% and 64%, respectively. Fourier Transform Infrared Spectrum of the grafted products showed an additional sharp absorption band at 2244 cm^?1 due to ? C?N stretching, thereby confirming the grafting of AN onto TKP. Scanning electron microscopy studies indicated change in contour of the polysaccharide on grafting and the thick polymeric coating of AN on the surface alongwith grafting of AN such that all the gap between polysaccharide particles have been closed. Thermal studies using thermogravimetric and differential gravimetric analyses confirmed that TKP‐g‐AN has overall high thermal stability than pure TKP. Reaction mechanism of grafting of acrylnitrile onto TKP is also proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Graft copolymerization of vinyl monomers onto modified cottons. XII. Grafting of 1,1-dihydroperfluoroheptyl acrylate onto cellulose carbamate using hydrogen peroxide as initiator

Cellulose carbamate having 1.4% N was grafted with 1,1-dihydroperfluoroheptyl acrylate (DHPFHA) using H₂O₂ as initiator under a variety of conditions. The technique used involved padding the fabric in H₂O₂ solution at room temperature followed by impregnating it in an aqueous emulsion of DHPFHA. The graft yield, expressed as fluorine percent, was found to depend upon monomer and initiator concentration, temperature, and reaction time and pH of the polymerization medium as well as upon the carbamate content of the modified cotton. Increasing the monomer concentration up to 5% caused a considerable enhancement in grafting. The same holds true for initiator concentration up to a certain limit after which the grafting decreases. Raising the reaction temperature up to 100°C was accompanied by an increment in the magnitude of grafting reaction. The latter was characterized by an initial fast rate followed by a slower rate. Slightly acidic media (pH 5–6) proved to be the best for performing grafting. The graft yields were quite poor when grafting was carried out in acidic (pH 2–4) or alkaline (pH 8–12) media. The presence of a relatively smaller amount of carbamate groups in the cellulose molecules decreases its susceptibility to grafting. The opposite holds true for larger amounts. Incorporation of FeSO₄ at low concentration in the monomer emulsion had no effect on the graft yield. However, the latter decreases at higher FeSO₄ concentration. Grafted cellulose carbamate having ca. 15% fluorine showed very good oil and water repellency. The grafted product retained ca. 85% of the strength of cellulose carbamate.     

Graft copolymerization of vinyl monomers onto silk fibers initiated by a semiconductor‐based photocatalyst

Graft copolymerization onto silk (Bombyx mori) was carried out with vinyl monomers (methyl methacrylate and acrylamide) and initiated by a semiconductor‐based photocatalyst (cadmium sulfide). The utility of a semiconductor as an initiator in free‐radical photografting and the effects of ethylene glycol and triethylamine with cadmium sulfide on graft copolymerization were explored. Depending on the reaction conditions, 10–48% grafting with methyl methacrylate and 4–26% grafting with acrylamide were achieved. The reaction conditions were optimized, and the grafted fibers were characterized with scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetry analysis, and tensile strength measurements. The chemical resistance and water absorption of the grafted fibers were compared with those ungrafted fibers. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Graft copolymerization of vinyl monomers on modified cottons,part XVII. Continuous and semi continuous methods for grafting of partially carboxymethylated cotton with acrylamide

Semi continuous and continuous methods were described for grafting of acrylamide to partially carboxymethylated cotton (PCMC). In essence, PCMC previously treated with ferrous sulphate was padded in a solution containing acrylamide and H₂O₂ followed by drying and baking. Incorporation of N-methylol finishing agent to the polymerization solution brought about easy care cotton with improved strength properties and good fabric performancy as measured by crease recovery.     

Graft copolymerization of vinyl monomers in wool fibers

Graft copolymerization of vinyl monomers, mainly methyl methacrylate, in reduced, successively alkylated, or KCN-Treated wool fibers was performed in the redox LiBr–persulfate system without homopolymer. The reduction gives a striking effect in promoting the graft copolymerization. Methylation or ethylene recrosslinking of the reduced wool, especially the former, decreases the graft-on remarkably. By the KCN treatment in which the conversion of disulfide to lanthionine bonds occurs, the grafting is decreased in the bromide–persulfate system but promoted in the system with persulfate alone. Methylation or KCN treatment of wool as well as reduction brings about a great increase in the absorption of persulfate. The grafting of the lanthionine-containing wool in the redox system accompanied by the liberation of bromine might be retarded by the pronounced bromination of monomers over the inhibiting of homopolymerization, because the lanthionine bonds are more stable to bromine than the disulfide bonds. In general, disulfide bonds and the other easily oxidized components of wool may perhaps play an important role in regulating the bromination of monomers and in the graft copolymerization without homopolymer. The molecular weight of graft polymer is decreased distinctly with increasing extent of reduction of wool. From these results, the thiol groups on wool are considered to give predominantly graft centers by the radicalotropy from SO₄, OH·, and/or Br·.     

Graft copolymerization of vinyl monomers on modified cottons,XXI. Cu++/hydrazine hydrate redox system induced grafting of methyl methacrylate on periodate oxidized cellulose

Periodate oxidized cellulose was grafted with methyl methacrylate using hydrazine hydrate in presence and absence of Cu⁺⁺. The grafting reaction was favoured in presence of Cu⁺⁺ and it was advantageous to treat first the cellulose material with copper sulphate solution rather than to incorporate it in the polymerization system. The graft yields depended upon the concentrations of copper sulphate and hydrazine hydrate, pH, temperature, and time of polymerization as well as degree of oxidation of cellulose. There were optimal concentrations of copper sulphate (6–8 mmol/l) and hydrazine hydrate (2 mmol/l). A polymerization medium of pH 6 and a temperature of 60°C constituted to optimal pH and temperature for grafting. Oxidized cellulose proved to be more amenable to grafting as compared with unoxidized cellulose and the magnitude of grafting relied on the degree of oxidation. A tentative mechanism was also suggested for grafting of cellulose substrates with a vinyl monomer using a Cu⁺⁺-hydrazine hydrate redox system.     

Grafting vinyl monomers onto cellulose. IV. Graft copolymerization of methyl methacrylate onto modified cellulose using peroxydiphosphate as the initiator

The graft copolymerization of methyl methacrylate onto modified cellulose was studied at 60° causing peroxydiphosphate as the initiator. The rate of grafting in case of different modified cellulose was determined by varying peroxydiphosphate, monomer, nature of substrate, and temperature. The molecular weight of the isolated polymer has been determined, and the mechanism of grafting is discussed.     

Ce(IV)-N-acetylglycine initiated graft copolymerization of acrylonitrile onto chemically modified pineapple leaf fibers

Graft copolymerization of acrylonitrile (AN) onto chemically modified pineapple leaf fiber (PALF) was studied using Ce(IV) and N-acetylglycine (NAG) combination as initiator in the temperature range 40–60°C. The effects of concentration of monomer, Ce(IV), and NAG on graft yield have been studied. Besides the effects of time, temperature, acid, amount of PALF, some inorganic salts and organic solvents on graft yield have been investigated. FTIR and scanning electron microscopy of PALF and grafted PALF have been studied. Grafting has improved the thermal stability of PALF. © 1996 John Wiley & Sons, Inc.     

Graft copolymerization of methyl acrylate onto nylon1010 initiated by potassium diperiodatonickelate(IV)

In this article, the graft copolymerization of methyl acrylate (MA) onto nylon1010 by using potassium diperiodatonickelate(IV) [Ni(IV)]–nylon1010 redox system as initiator was studied in alkaline medium. The effect of different factors on grafting parameters was investigated. The structure of the graft copolymer was determined by infrared (IR), X-ray diffraction, and scanning electron microscope (SEM). It was found that Ni(IV)–nylon1010 system is an efficient redox initiator for this graft copolymerization. A single-electron transfer mechanism is proposed to explain the formation of radicals and the initiation. The graft copolymer was used as the compatibilizer in blends of poly(methyl methacrylate) (PMMA) and nylon1010. The SEM photographs indicate that the graft copolymer greatly improved the compatibility of the blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2636–2640, 2001     

Graft copolymerization of vinyl monomers on modified cottons. XVIII. Grafting of methyl methacrylate and acrylonitrile on cotton treated with N-methylol crosslinking agents using tetravalent cerium as initiator

Ce^IV-induced grafting of methyl methacrylate and acrylonitrile on cotton fibers crosslinked with dimethylol ethylene urea, dimethylol dihydroxyethylene urea, and dimethylol carbamate was investigated. The graft yields obtained with crosslinked cotton were signifcantly lower than the untreated cotton, irrespective of the crosslinking agent and the monomer used. However, the extent and rate of grafting depended upon the degree of crosslinking and the nature of monomer. Based on the magnitude of grafting and Ce^IV consumption during grafting and oxidation of the untreated and crosslinked cottons, the different reactions occurring during grafting of vinyl monomers on these modified cottons were elucidated.     

Graft copolymerization of methyl acrylate onto poly(vinyl alcohol) initiated by potassium diperiodatoargentate(III)

The graft copolymerization of methyl acrylate onto poly(vinyl alcohol) (PVA) using potassium diperiodatoargentate(III) [Ag(III)]–PVA redox system as initiator was studied in an alkaline medium. Some structural features and properties of the graft copolymer were confirmed by Fourier‐transfer infrared spectroscopy, scanning electron microscope, X‐ray diffraction and thermogravimetric analysis. The grafting parameters were determined as a function of concentrations of monomer, initiator, macromolecular backbone (X?_n = 1750, M? = 80 000 g mol^?1), reaction temperature and reaction time. A mechanism based on two single‐electron transfer steps is proposed to explain the formation of radicals and the initiation profile. Other acrylate monomers, such as methyl methacrylate, ethyl acrylate and n‐butyl acrylate, were also used to produce graft copolymerizations. It has been confirmed that grafting occurred to some degree. Thermogravimetric analysis was performed in a study of the moisture resistance of the graft copolymer. Copyright © 2004 Society of Chemical Industry