POE-g-Si对PP/木粉复合材料结构和性能的影响

以硅烷接枝乙烯-1-辛烯共聚物(POE-g-Si)为增容剂,制备了聚丙烯(PP)/POE-g-Si/木粉复合材料。研究了POE-g-Si对PP/木粉复合材料的晶态结构、界面相容性、动态力学性能及力学性能的影响。加入POE-g-Si有效改善了复合材料的界面相容性;PP中β晶型消失,结晶度由71.50%降至61.91%,木粉与基体界面处出现横晶;α,β转变峰均增强;复合材料拉伸强度、抗冲击性能均明显提高。     

Tensile properties of wood flour/kenaf fiber polypropylene hybrid composites

Hybrid composites of wood flour/kenaf fiber and polypropylene were prepared at a fixed fiber to plastic ratio of 40 : 60 and variable ratios of the two reinforcements namely 40 : 0, 30 : 10, 20 : 20, 10 : 30, and 0 : 40 by weight. Polypropylene was used as the polymer matrix, and 40–80 mesh kenaf fiber and 60–100 mesh wood flour were used as the fiber and the particulate reinforcement, respectively. Maleic anhydride and dicumyl peroxide were also used as the coupling agent and initiator, respectively. Mixing process was carried out in an internal mixer at 180°C at 60 rpm. ASTM D 638 Type I tensile specimens of the composites were produced by injection molding. Static tensile tests were performed to study the mechanical behavior of the hybrid composites. The hybrid effect on the elastic modulus of the composites was also investigated using the rule of hybrid mixtures and Halpin–Tsai equations. The relationship between experimental and predicted values was evaluated and accuracy estimation of the models was performed. The results indicated that while nonhybrid composites of kenaf fiber and wood flour exhibited the highest and lowest modulus values respectively, the moduli of hybrid composites were closely related to the fiber to particle ratio of the reinforcements. Rule of hybrid mixtures equation was able to predict the elastic modulus of the composites better than Halpin–Tsai equation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Moisture absorption effects on the thermal and mechanical properties of wood flour/linseed oil resin composites

The thermal and mechanical behavior of new natural polymeric composite materials after exposure to humid environments must be well known and understood in order to predict their performance in final applications. For this reason, composites made from unsaturated polyesters based on linseed oil and filled with wood flour were exposed to environments of different relative humidities and their final properties were measured. In general, the equilibrium moisture content increased as the wood flour percentage increased. Dynamic mechanical tests performed in temperature scan mode were carried out in order to monitor the changes resulting from moisture absorption on the main transition temperature of the matrix (T_α). The temperature of this transition decreased as the amount of absorbed water increased, but the effect was partially reversible by re‐drying the samples. The mechanical properties were also strongly affected by moisture. The flexural modulus and ultimate stress of the composites decreased after equilibration in humid environments. Copyright © 2006 Society of Chemical Industry     

Dynamic mechanical properties of high density polyethylene and teak wood flour composites

The dynamic mechanical properties of high density polyethylene (HDPE) and teak wood flour (TWF) composites at varying volume fraction (Φ _f) of TWF from 0.00 to 0.32 have been studied. In HDPE/TWF composites, storage modulus (E′) decreased at Φ _f = 0.05, then increases with Φ _f; however, values were lower than HDPE up to Φ _f = 0.16, due to a pseudolubricating effect of filler. Loss modulus (E″) values were higher than HDPE in β and α relaxation regions while in γ relaxation region values were marginally equal to HDPE. Tan δ value decreases with Φ _f which may be due to enhanced amorphization and decreased crystallinity of HDPE. In presence of maleic anhydride grafted HDPE (HDPE-g-MAH), E′ values were lower than HDPE/TWF composites. In HDPE/TWF/HDPE-g-MAH, E″ were slightly higher than HDPE/TWF due to slippage of HDPE chains facilitated by the extent of degradation of coupling agent. Tan δ were higher for both systems than the rule of mixture.     

Effects of lubricants on the rheological and mechanical properties of wood flour/polypropylene composites

The lubricant is an indispensable agent used in wood plastic composites (WPCs) to improve the processing flowability, especially with high wood content. Here, the effects of different lubricating systems on the rheological and mechanical properties of wood flour/polypropylene (WF/PP) composites are investigated. Additionally, several theoretical models are used to describe the rheological behavior. The results show that stearic acid (SA), semirefined paraffin wax (Wax), and zinc stearate (ZnSt) can decrease the equilibrium torque, complex viscosity, relaxation time, and flow activation energy of the composite melts. Compared to a single lubricant, the combination of Wax and SA lubricants exhibits lower values and the composite with 3 wt % SA and 1 wt % Wax has the best lubricating effect. The synergistic effect of the combined SA and Wax lubricants further decreases the interactive force between the molecules, indicating that multifunctional lubricating systems play a predominant role in WPCs and improve the overall processing properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47667.     

Flammability and mechanical properties of wood flour‐filled polypropylene composites

Polypropylene (PP) composites filled with wood flour (WF) were prepared with a twin‐screw extruder and an injection‐molding machine. Three types of ecologically friendly flame retardants (FRs) based on ammonium polyphosphate were used to improve the FR properties of the composites. The flame retardancy of the PP/WF composites was characterized with thermogravimetric analysis (TGA), vertical burn testing (UL94‐V), and limiting oxygen index (LOI) measurements. The TGA data showed that all three types of FRs could enhance the thermal stability of the PP/WF/FR systems at high temperatures and effectively increase the char residue formation. The FRs could effectively reduce the flammability of the PP/WF/FR composites by achieving V‐0 UL94‐V classification. The increased LOI also showed that the flammability of the PP/WF/FR composites was reduced with the addition of FRs. The mechanical property study revealed that, with the incorporation of FRs, the tensile strength and flexural strength were decreased, but the tensile and flexural moduli were increased in all cases. The presence of maleic anhydride grafted polypropylene (MAPP) resulted in an improvement of the filler–matrix bonding between the WF/intumescent FR and PP, and this consequently enhanced the overall mechanical properties of the composites. Morphological studies carried out with scanning electron microscopy revealed clear evidence that the adhesion at the interfacial region was enhanced with the addition of MAPP to the PP/WF/FR composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Physical,mechanical, and thermal properties of polypropylene composites filled with walnut shell flour

Injection molded specimens were prepared from the walnut shell flour and polypropylene with and without maleic anhydride-grafted polypropylene at 40, 50, and 60% (weight) contents of the walnut shell. The bending and tensile modulus of the composites significantly increased with increasing the filler content while the bending and tensile strengths significantly decreased. Water absorption and thickness swelling of the composites increased with increasing filler content. The MAPP improved the interfacial adhesion between walnut shell flour and polymer matrix. A 40/57/3 formulation of the walnut shell flour/polypropylene/MAPP can be used in outdoor applications requiring a high dimensional stability.     

Effect of hydrothermal environment on moisture absorption and mechanical properties of wood flour–filled polypropylene composites

The moisture absorption and mechanical properties of wood flour–filled polypropylene composites in a hydrothermal environment have been studied by immersing the composites in water at 23, 60, and 100°C. The degree of moisture absorption was found to be dependent on the modification of matrix, the weight percentage, mesh size, and surface treatment of wood flours. It increased with increasing the immersion temperature. The tensile strength of all composites with wood flours of different contents, mesh sizes, and surface treatments increased after immersion in water baths of various temperatures, to either greater or lesser extents. The flexural strength and modulus followed a similar trend when immersed in water at ambient temperature. However, the contrary was true for composites when immersed in 60 and 100°C water baths. The impact strength increased after immersion in water at each immersion temperature, and the extent of such increment decreased with increasing the immersion temperature. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2824–2832, 2002     

The effect of epoxy‐polyester hybrid resin on mechanical properties,rheological behavior,and water absorption of polypropylene wood flour composites

The effect of epoxy resin on mechanical and Rheological properties, and moisture absorption of wood flour polypropylene composites (WPCs) were investigated. The reactive mixing of epoxy resin with 30, and 40 wt% wood flour and polypropylene (PP) was carried out in twin screw extruder with a special screw elements arrangement. PP grafted maleic anhydrides (MPP) were used as coupling agent to improve the interfacial interactions of wood flour, epoxy resin, and PP. The tensile strength of composites decreased, and elastic modulus and moisture absorption increased with increasing epoxy resin content. The complex viscosity η* increased with increasing epoxy resin content of composites, and a synergistic effect in increasing the η* was observed at 3 wt% resin. The epoxy resin modified wood‐PP composites that chemically coupled by MPP showed minimum water absorption with highest elastic modulus. The experimental oscillation rheologyical data were used to drive a model to predict the flow behavior of WPCs, in a wide range of frequencies. POLYM. ENG. SCI., 47:2041–2048, 2007. © 2007 Society of Plastics Engineers     

Evaluation and optimization of the mechanical properties of highly filled PVC/(wood flour) composites by using experimental design

In this study, PVC/(wood flour) (WF) composites were prepared by using a counterrotating twin‐screw extruder, and the effects on the mechanical properties of concentration and particle size of the WF, type and amount of coupling agent, K value of PVC, feed rate of extruder, and die temperature were investigated. Optimization of various formulation parameters based on the Taguchi method demonstrated that the wood content and wood particle size were the most important parameters. Flexural modulus increased upon increasing WF loading up to 50 wt%. Also, flexural strength and modulus increased with particle size because of the higher aspect ratio and better quality of mixing. Use of coupling agents had a minor effect that was attributed to the moderately high polarity of PVC causing relatively good compatibility between WF particles and the PVC matrix. The optimum level of WF calculated by considering the contribution factor was 50 wt%. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers     

Rheological and mechanical properties of composites made from wood flour and recycled LDPE/HDPE blend

The effect of compounding method is studied with respect to the rheological behavior and mechanical properties of composites made of wood flour and a blend of two main components of plastics waste in municipal solid waste, low-density polyethylene (LDPE) and high-density polyethylene (HDPE). The effects of recycling process on the rheological behavior of LDPE and HDPE blends were investigated. Initially, samples of virgin LDPE and HDPE were thermo-mechanically degraded twice under controlled conditions in an extruder. The recycled materials and wood flour were then compounded by two different mixing methods: simultaneous mixing of all components and pre-mixing, including the blending of polymers in molten state, grinding and subsequent compounding with wood flour. The rheological and mechanical properties of the LDPE/HDPE blend and resultant composites were determined. The results showed that recycling increased the complex viscosity of the LDPE/HDPE blend and it exhibited miscible behavior in a molten state. Rheological testing indicated that the complex viscosity and storage modulus of the composites made by pre-mixing method were higher than that made by the simultaneous method. The results also showed that melt pre-mixing of the polymeric matrix (recycled LDPE and HDPE) improved the mechanical properties of the wood–plastic composites.     

Mechanical properties of poly(vinyl chloride)/wood flour/glass fiber hybrid composites

Short glass fibers were added to poly(vinyl chloride) (PVC)/wood flour composites as reinforcement agents. Unnotched and notched impact strength of PVC/wood flour/glass fiber hybrid composites could be increased significantly without losing flexural properties by adding type L glass fibers and over 40% of PVC. There was no such improvement when using type S glass fiber. The impact strength of hybrid composites increased along with the increment of the type L glass fiber content at a 50% PVC content. At high PVC contents, impact fracture surfaces were characterized by wood particle, glass fiber breakage and pullout, whereas interfacial debonding was the dominant fracture mode at higher filler concentrations. The significant improvement in impact strength of hybrid composites was attributed to the formation of the three‐dimensional network glass fiber architecture between type L glass fibers and wood flour.     

Effect of filler surface treatment on mechanical properties and thermal properties of single and hybrid filler–filled PP composites

The influence of two types of surface treatments (aminosilane and Lica‐12) on the mechanical and thermal properties of polypropylene (PP) filled with single and hybrid filler (silica and mica) was studied. An improvement in tensile properties and impact strength was found for both treatments compared to those of untreated composites. However, the filler with silane coupling agent showed better improvement compared to the filler with Lica‐12 coupling agent. This was due to better adhesion between filler and matrix. Thermal analysis indicates that surface treatments increased the nucleating ability of filler, but decreased the coefficient of thermal expansion of PP composites. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effects of gamma irradiation with and without compatibilizer on the mechanical properties of polypropylene/wood flour composites

In this study, polypropylene/wood flour (Hevea brasiliensis) composites at 40 wt% filler content were prepared using a twin-screw extruder and an injection moulding machine. The effects of gamma irradiation with and without maleic anhydride graft polypropylene (PP-g-MA) compatibilizer (3% relative to the wood flour content) on the flexural properties, tensile properties, and creep behavior were investigated. The irradiation in nitrogen and air atmospheres was performed at various radiation doses (i.e. 5, 10, 20 and 30 kGy). The results revealed the improvement of mechanical properties and creep behavior was found in the presence of gamma irradiation at low radiation doses (5 and 10 kGy), while the composites irradiated at radiation doses over 10 kGy rendered the decrease of mechanical properties. Furthermore, at the same radiation dose, the composites irradiated in nitrogen atmosphere tended to provide significantly higher mechanical properties than the ones irradiated in air atmosphere. Interestingly, the great enhancement of creep resistance was observed, i.e. the tensile strains (6 h of static loading) of the irradiated composites (at 10 kGy) with and without compatibilizer were approximately 36% and 19% lower than that of the untreated composite, respectively. In addition, the Burger’s creep model is applied in order to determine the creep parameters of the composites.     

Fatigue characterization and reliability analysis of wood flour filled polypropylene composites

In this article, the flexural fatigue behavior of wood flour filled polypropylene (PP) composite samples was investigated, and a probabilistic approach is presented to evaluate the fatigue reliability. A nondimensional analysis was adopted to establish a prediction equation for the fatigue life of the composites, and the S‐N curves and survivability diagrams are then constructed to evaluate the fatigue reliability for the wood plastic composites. The predicted results in the nondimensional fatigue model are better related to the testing data than the general S‐N curve, and they could be used as the predictive model for fatigue life analysis of the wood plastic composites. The best‐fit S‐N curve and its corresponding bounds based on 95% confidence are provided, and the fatigue data are well distributed within a 95% confidence range. A two‐parameter Weibull distribution function is used to analyze statistically the fatigue life test results of composite samples based on the probability of survival concept which is proposed to incorporate the probability of survival and the fatigue life time of the composites at a specified lifetime. Weibull graphics are plotted for the composite samples used in the fatigue test, and the S‐N curves are then drawn for different reliability index (RI) of 0.01, 0.1, 0.5, 0.9, 0.99, and 0.368 using these data. These S‐N curves are introduced for the identification of the first failure time as reliability and safety limits. It is shown that the nondimensional fatigue model and two‐parameter probability distribution model can be used successfully for reliability evaluation and lifetime estimation of wood plastic composites. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Effects of crystallinity of polypropylene (PP) on the mechanical properties of PP/styrene-ethylene-butylene-styrene-g-maleic anhydride (SEBS-g-MA)/teak wood flour (TWF) composites

Polymer Bulletin - Tensile and impact properties of PP/SEBS-g-MA/WF composites up to wood flour volume fraction 0.31 are evaluated. Tensile modulus and strength increased while elongation-at-break...     

Crystallization and melting behavior of HDPE in HDPE/teak wood flour composites and their correlation with mechanical properties

The nonisothermal crystallization behavior and melting characteristics of high‐density polyethylene (HDPE) in HDPE/teak wood flour (TWF) composites have been studied by differential scanning calorimetry (DSC) and wide angle X‐ray diffraction (WAXD) methods. Composite formulations of HDPE/TWF were prepared by varying the volume fraction (?_f) of TWF (filler) from 0 to 0.32. Various crystallization parameters evaluated from the DSC exotherms were used to study the nonisothermal crystallization behavior. The melting temperature (T_m) and crystallization temperature (T_p) of the composites were slightly higher than those of the neat HDPE. The enthalpy of melting and crystallization (%) decrease with increase in the filler content. Because the nonpolar polymer HDPE and polar TWF are incompatible, to enhance the phase interaction maleic anhydride grafted HDPE (HDPE‐g‐MAH) was used as a coupling agent. A shift in the crystallization and melting peak temperatures toward the higher temperature side and broadening of the crystallization peak (increased crystallite size distribution) were observed whereas crystallinity of HDPE declines with increase in ?_f in both DSC and WAXD. Linear correlations were obtained between crystallization parameters and tensile and impact strength. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Dynamic mechanical properties of nanoclay filled TPU/PP blends with compatibiliser

Abstract

Blends of thermoplastic polyurethane (TPU) and polypropylene (PP) are highly incompatible because of large differences in polarities and high interfacial tensions. On one hand, PP is added to TPU to improve TPU's thermal stability, chemical properties, mechanical properties (modulus, strength and hardness) and processing performance and to reduce TPU's cost. On the other hand, TPU is blended with PP to improve PP's properties (e.g. abrasion, flexibility, tear strength, shock absorbing capabilities, impact strength, adhesion and paintability/printability). Earlier works in polyurethane/organoclay nanocomposites, PP/organoclay nanocomposites and TPU/PP blends were studied. In our experimental work, both ester and ether based TPU nanocomposites were prepared by melt blending using 3?wt-% Cloisite 10A (organically modified montmorillonite clay) as the nanoscale reinforcement and blended with PP with/without PP-graft-maleic anhydride as the compatibiliser. Blends of nanoclay filled TPU/PP were evaluated for dynamic mechanical properties such as storage modulus E′, loss modulus E″ and dissipation factor tanδ.     

Effect of microencapsulated ammonium polyphosphate on flame retardancy and mechanical properties of wood flour/polypropylene composites

Microencapsulated ammonium polyphosphate (MCAPP) was prepared by using melamine–formaldehyde (MF) resin via polymerization in situ. The product was characterized by Fourier transform infrared spectroscopy, X‐ray photoelectron spectroscopy, energy dispersive spectroscopy, water solubility tests, water contact angle, and thermogravimetric analysis. The tests indicate that ammonium phosphate (APP) was successfully coated by the MF resin, and MCAPP with lower water solubility and higher water resistance outperformed APP. After modification by MCAPP, the flammability of wood–plastic composites (WPCs) was investigated by limiting oxygen index (LOI) and cone calorimetry. The results showed that MCAPP/WPC had higher LOI value, lower heat release rate, and more char residual at the end of cone calorimetry than APP/WPC, indicating that the WPC used MCAPP as flame retardant performed better flame retardancy than the WPC mixed with unmodified APP. Moreover, all measured mechanical properties of MCAPP/WPC were distinctly better than APP/WPC. POLYM. COMPOS., 37:666–673, 2016. © 2014 Society of Plastics Engineers     

Processability,morphology and mechanical properties of wood flour reinforced high density polyethylene composites

Abstract

Wood flour reinforced high density polyethylene (HDPE) composites have been prepared and their rheological properties measured. The melt viscosity decreased as the processing temperature increased and the wood flour content decreased. A power law model was used to describe the pseudoplasticity of these melts. Adding wood flour to HDPE produced an increase in tensile strength and modulus. Composites compounded in a twin screw extruder and treated with a coupling agent (vinyltrimethoxysilane) or a compatibliser (HDPE grafted with maleic anhydride) exhibited better mechanical properties than the corresponding unmodified composites because of improved dispersion and good adhesion between the wood fibre and the polyalkene matrix. Scanning electron microscopy of the fracture surfaces of these composites showed that both the coupling agent and compatibiliser gave superior interfacial strength between the wood fibre and the polyalkene matrix.