Dynamic mechanical analysis of pineapple leaf/glass hybrid fiber reinforced polyester composites

The dynamic mechanical properties of randomly oriented intimately mixed hybrid composites based on pineapple leaf fibers (PALF) and glass fibers (GF) in unsaturated polyester (PER) matrix were investigated. The PALFs have high‐specific strength and improve the mechanical properties of the PER matrix. In this study, the volume ratio of the two fibers was varied by incorporating small amounts of GF such as PALF/GF, 90/10, 80/20, 70/30, and 50/50, keeping the total fiber loading constant at 40 wt%. The dynamic modulus of the compositeswas found to increase on GF addition. The intimately mixed (IM) hybrid composites with PALF/GF, 80/20 (0.2 V_f GF) showed highest E′ values and least damping. Interestingly, the impact strength of the composites was minimum at this volume ratio. The composites with 0.46 V_f GF or PALF/GF (50/50) showed maximum damping behavior and highest impact strength. The results were compared with hybrid composites of different layering patterns such as GPG (GF skin and PALF core) and PGP (PALF skin and GF core). IM and GPG hybrid composites are found more effective than PGP. The activation energy values for the relaxation processes in different composites were calculated. The overall results showed that hybridization with GF enhanced the performance properties. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Fabrication and characterization of novel zirconia filled glass fiber reinforced polyester hybrid composites

Novel hybrid glass fiber reinforced polyester composites (GFRPCs) filled with 1‐5 wt % microsized zirconia (ZrO₂) particles, were fabricated by hand lay‐up process followed by compression molding and evaluated their physical, mechanical and thermal behaviors. The consumption of styrene in cured GFRPCs was confirmed by Fourier transform infrared spectroscopy. The potential implementation of ZrO₂ particles lessened the void contents marginally and substantially enhanced the mechanical and thermal properties in the resultant hybrid composites. The GFRPCs filled with 4 wt % ZrO₂ illustrated noteworthy improvement in tensile strength (66.672 MPa) and flexural strength (67.890 MPa) while with 5 wt % ZrO₂ showed 63.93% rise in hardness, respectively, as compared to unfilled GFRPCs. Physical nature of polyester matrix for composites and an improved glass transition temperature (T_g) from 103 to 112 °C was perceived by differential scanning calorimetry thermograms. Thermogravimetric analysis revealed that the thermal stability of GFRPCs was remarkably augmented with the addition of ZrO₂. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43615.     

短玻纤增强尼龙66复合材料的制造方法及比较

通过短玻纤增强PA66复合材料二种制造方法的对比,结合短玻纤增强复合材料的增强机理,探寻了加工工艺路线对材料力学性能的影响。结果表明:采用侧喂料短切原丝法工艺可提高材料的力学性能。     

长玻璃纤维增强聚丙烯复合材料的韧性

以玻璃纤维和聚丙烯为原料,制备了长玻璃纤维增强聚丙烯(LFT-PP)复合材料,研究了基体韧性、纤维长度和界面相容剂对LFT-PP韧性的影响。结果表明LFT-PP韧性随基体韧性增加而增加;当玻璃纤维长度从2.06mm增加到4.66mm时,LFT-PP的悬臂梁缺口冲击强度从134.4J/m提高到238.0J/m,增加了约80%;添加界面改性剂降低了LFT-PP悬臂梁缺口冲击强度,从311.4J/m降为181.8J/m。     

Crystallization kinetics of glass fiber reinforced PBT composites

The effect of glass fibers on the crystallization of poly(butylene terephthalate) (PBT) was investigated by crystallization kinetics analysis under isothermal and nonisothermal conditions. From the crosspolar optical micrographs of melt‐ and solvent‐crystallized PBT composites, the glass fibers were found to increase the number density and decrease the size of crystallites. The glass fibers provided heterogeneous nucleation sites, and thus enhanced the overall rate of PBT crystallization in isothermal experiments. However, the Avrami exponent and the regime transitions were not significantly affected by the presence of glass fibers. For the nonisothermal kinetics of PBT composites, the model prediction was excellent in most ranges of crystallization, but it deviated above 70% of crystallization especially at fast cooling rates (>40°C/min). This discrepancy of the model seemed to result from the growth regime transitions, which were clearly observed especially at high undercoolings. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 576–585, 2000     

玻璃纤维增强聚丙烯复合材料研究进展

对玻璃纤维增强聚丙烯复合材料的研究近况进行了简单介绍,对其界面改性、增韧增强、结晶行为、长切玻璃纤维增强、材料性能及成型工艺条件进行了较详细的讨论,并对该复合材料今后的研究进行了展望。     

玻璃纤维增强PVC复合材料研究进展

根据玻璃纤维增强PVC树脂的发展过程,分别介绍了短切纤维增强PVC树脂和长切纤维增强PVC树脂的研究概况,并展望了玻璃纤维增强PVC复合材料的发展前景。     

Physical,mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid composites

Fiber reinforced polymer composites has been used in a variety of application because of their many advantages such as relatively low cost of production, easy to fabricate, and superior strength compare to neat polymer resins. Reinforcement in polymer is either synthetic or natural. Synthetic fiber such as glass, carbon, etc. has high specific strength but their fields of application are limited due to higher cost of production. Recently there is an increase interest in natural composites which are made by reinforcement of natural fiber. In this connection, an investigation has been carried out to make better utilization of coconut coir fiber for making value added products. The objective of the present research work is to study the physical, mechanical, and water absorption behavior of coir/glass fiber reinforced epoxy based hybrid composites. The effect of fiber loading and length on mechanical properties like tensile strength, flexural strength, and hardness of composites is studied. The experimental results reveal that the maximum strength properties is observed for the composite with 10 wt% fiber loading at 15 mm length. The maximum flexural strength of 63 MPa is observed for composites with 10 wt% fiber loading at 15 mm fiber length. Similarly, the maximum hardness value of 21.3 Hv is obtained for composites with 10 wt% fiber loading at 20 mm fiber length. Also, the surface morphology of fractured surfaces after tensile testing is examined using scanning electron microscope (SEM). POLYM. COMPOS., 35:925–930, 2014. © 2013 Society of Plastics Engineers     

Nanomechanical mapping of glass fiber reinforced polymer composites using atomic force acoustic microscopy

In this work, a dual‐frequency resonance tracking (DFRT) method was applied on atomic force acoustic microscopy (AFAM) and high‐resolution, quantitative nanomechanical mapping of a glass fiber–reinforced polymer composites (GFRP) was realized. Results show that even using the single‐frequency AFAM, the fiber, and epoxy can give very good contrast in amplitude images. The modulus mapping result on GFRP by DFRT AFAM was compared with that by dynamic nanoindentation, and it is found that DFRT AFAM can map the elastic modulus with high spatial resolution and more reliable results. The interface of GFRP was especially investigated using a 2 μm × 2 μm scanning area. Finite element analysis was implemented to investigate the effect of tip radius and the applied pressing force on the interface measurement using a sharp “interface”. By setting a linear‐modulus‐varied interface with finite width in finite element analysis (FEA), similar comparison between FEA and AFAM experimental results was also implemented. The average interface width is determined to be 476 nm based on the high‐resolution modulus image, indicating that AFAM is a powerful method for nanoscale interface characterization. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39800.     

Modulus of short carbon and glass fiber reinforced composites

A theoretical model for a short fiber reinforced composite is proposed. The composite is assumed to consist of an aggregate of sub-units, each sub-unit possessing the elastic properties of a reinforced composite in which the fibers are continuous and fully aligned. The elastic constants of a partially oriented composite are then calculated by the Voigt and Reuss averaging procedures, giving upper and lower bounds respectively for the composite modulus. Comparison is made with experimental data for such composites. The measured modulus of glass and carbon fiber composites is found to be given by the Reuss or lower bound, to a good approximation compared with the difference between the bounds, for fiber orientations ranging from almost isotropic to highly aligned.     

Mechanical characterization of new glass fiber reinforced epoxy composites

Glass fiber reinforced plastic (GFRP) composites were made using CTPEGA [carboxyl terminated poly(ethylene glycol) adipate] modified epoxy as a matrix and characterized for their flexural properties, impact strength and interlaminar shear stress (ILSS). The volume fraction of glass was about 0.45 for all the composites. The concentration of CTPEGA in the matrix was varied gradually from 0 to 40 phr (parts per hundred parts of resin), to investigate the effect of CTPEGA concentration on the mechanical properties of the composites. It was found that the flexural strength and ILSS gradually decreases with increase in CTPEGA concentration. However, the impact strength of the composites increases up to 20 phr of CTPEGA concentration and decreases thereafter. Scanning electron microscope (SEM) analysis of the fracture surface indicates massive plastic deformation in modified epoxy based composites. Polym. Compos. 25:165–171, 2004. © 2004 Society of Plastics Engineers.     

Mechanical properties of glass fiber/organic fiber mixed–mat reinforced thermoplastic composites

The purpose of this study is to investigate the influence of different types of fibers on the mechanical properties of hybrid composite materials. Long and short glass fibers (GF) and different types of organic fibers, viz. aramid fiber, DuPont Kevlar‐49 (KF), liquid crystalline polymer (LCP), and vinylon (VF) in hybrid composites, were used to reinforced the high density polyethylene (HDPE) matrix. The long fiber hybrid composites were prepared in a “fiber separating and flying machine,” while the short fiber hybrid composites were prepared in an “elastic extruder.” The total amount of fibers used in both long and short fiber hybrid composites was fixed at 20 vol%. The influence of fiber content, length, and mixing ratio on mechanical properties, such as tensile, bending, Izod and high rate impact strength, as well as viscoelastic propertics in the solid state, was studied. Fracture surfaces of the materials were also examined using a scanning electron microscopy.     

Mechanical properties of carbon fiber reinforced polyester/urethane hybrid network composites

Hybrid resins of unsaturated polyester/urethane were synthesized and characterized. Both the toughness and stiffness of the polyester were improved significantly by incorporating 20 wt% urethane. Unsaturated polyester, styrene, and ethane showed good compatibility during blending and probably formed a simultaneous interpenetrating network (IPN) during polymerization. The resultant IPN morphology possessed a unique glass transition temperature. This IPN morphology not only imparted great fracture resistance to the otherwise brittle polyester, but also changed the fracture mode of new resin composites. The molecular weight of unsaturated polyesters did not have significant effect on the mechanical properties, but did exert an apparent influence on the fracture mode. During the cure process the side reaction, an amine reaction, could be suppressed addition of suitable promoter and catalyst.     

Polyisobutylene-based modifiers for glass fiber reinforced unsaturated polyesters composites

In order to improve the toughness of glass fiber (GF) reinforced unsaturated polyester resin (UPR), low molecular weight polyisobutylene (LPIB) was selected as the toughening agent. Considering its poor thermal compatibility with UPR matrix, LPIB was first grafted by two small molecular compounds, named maleic anhydride (MAH) and glycidyl methacrylate (GMA) through the novel solvothermal method which was developed in our laboratory. And then, all of these three kinds of low modulus elastomers, including LPIB, MAH grafted polyisobutylene (LPIB-g-MAH) and GMA grafted polyisobutylene (LPIB-g-GMA) were selected to modify GF reinforced UPR (GFRUP) composites. According to the results, incorporation of small amounts of grafted LPIB contributed greatly to the improvement of the toughness of GFRUP composites because of the high flexibility of the molecular chain without obviously influencing other primary properties. Moreover, 4?wt% of elastomer was an optimal amount for promoting the mechanical properties of GFRUP composite. Compared to other liquid rubbers, LPIB-g-GMA had the best toughening effect due to its stronger effect of GMA on UPRGF system. In addition, the impact strength of the modified GFRUP composite was improved up to 2.3 order of that of the unmodified GFRUP composites when 4?wt% LPIB-g-GMA was added. Consequently, LPIB-g-GMA could be employed as an effective toughening agent to GFRUP system. The toughening mechanism, thermal behavior, thermal stability and morphology of GFRUP composite are also discussed. The morphology analysis further proved the increase in toughness through the addition of grafted LPIB.     

Effect of fiber treatment on the mechanical properties of hybrid fiber reinforced polystyrene composites. Part II. Use of glass fiber and wood pulp as hybrid fiber

The mechanical properties of polystyrene reinforced with a mixture of hardwood aspen chemithermomechanical pulp (CTMP) and surface-treated glass fiber have been studied. The adhesion of cellulose fiber to glass fiber as well as to thermoplastics improved thanks to various surface treatments of CTMP, e.g. coating with polymer+isocyanate or with silane, and grafting with polystyrene. In general, compared with non-treated CTMP-filled composites, the mechanical properties improved when surface-treated wood fiber was used as a filler. Experimental results indicate better compatibility between treated wood fiber and surface-treated glass fiber as well as polystyrene and, consequently, the mechanical properties were enhanced.     

Experimental analysis and theoretical modeling of the mechanical behavior of short glass fiber and short carbon fiber reinforced polycarbonate hybrid composites

In this research, polycarbonate (PC) composites with short glass fiber (SGF) and short carbon fiber (SCF) hybrid fiber reinforcements were compounded by single screw extruder and specimens were prepared by injection molding machine. This article aims to investigate the mechanical properties of PC hybrid composites, by means of the experimental and the theoretical methods. The composites were subjected to tensile test. Experimental results showed the improvements in tensile strength and modulus by increasing the SCF content of the hybrid composite. The theoretical tensile strength was predicted based on Kelly–Tyson model and rule of hybrid mixture. Kelly–Tyson model showed to be a good approximation to predict the tensile strength of composite. When the SCF was replaced by milled carbon fiber (MCF) to form a PC/SGF/MCF hybrid system, poorer mechanical properties are reported due to the weaker interfacial adhesion between MCF and PC, as proven by the scanning electron microscopy. POLYM. COMPOS., 37:1238–1248, 2016. © 2014 Society of Plastics Engineers     

Reaction injection molding process of glass fiber reinforced polyurethane composites

Structural reaction injection molding (SRIM) was used to produce polyurethane composites containing random continuous glass fiber mats. A long rectangular mold was used to carry out the SRIM experiments. 4,4′‐diphenylmethane diisocyanate and poly(propylene oxide) triol were used to formulate a thermoset polyurethane system. Dibutyltin dilaurate was used as a catalyst. A second order Arrhenius equation described the PU polymerization kinetic data obtained from the adiabatic temperature rise measurement. A viscosity as a function of temperature and conversion was developed using rheometer data. The pressure rise at the gate was measured during filling. The flow behavior within the mold was described by Darcy's law and the Kozeny's equation. The temperature profile within the mold measured by thermocouples during filling and curing coincided fairly well with the simulation results. The thermal transient problem at the wall was solved using the overall heat transfer coefficient, and it was analyzed as a function of Biot number. The dimensional stability of the fiber reinforced PU parts was excellent compared to the pure PU parts.     

表面处理对玻纤/碳纤增强橡胶基密封复合材料性能的影响

采用压延成张工艺制备碳纤维和玻璃纤维混杂增强非石棉橡胶基密封复合材料(NAFC),以横向抗拉强度作为表征混杂增强橡胶基密封材料中纤维与橡胶界面粘结性能的指标.通过扫描电镜(SEM)对材料横向拉伸试样断口进行形貌分析,及对材料的耐油、耐酸、耐碱性能进行测试,探讨了不同表面处理工艺对纤维与基体界面粘结效果的影响.研究结果表明,对玻璃纤维采用偶联剂KH-550浸渍后涂覆环氧树脂涂层,对碳纤维在空气氧化后涂覆环氧树脂涂层,可有效增强纤维、基体的界面粘结,所制得的混杂纤维增强复合材料具有较好的机械性能和耐介质性能.     

Electromechanical behavior of hybrid carbon/glass fiber composites with tension and bending

To understand the smart (i.e., good memory) characteristics of hybrid composites of carbon fibers (CFs) and glass fibers (GFs) with epoxy resin as a matrix, the changes in the electrical resistance of composites with tension and on bending were investigated. The electrical resistance behavior of composites under tension changed with the composition of the CF/GF, as well as with the applied strain. The fractional electrical resistance increased slowly with increasing strain within a relatively low strain region. However, with further loading it increased stepwise with the strain according to the fracture of the CF layers. The strain sensitivity of the samples increased with increasing CF weight percentage, and the samples incorporating more than 40 wt % CF showed a strain sensitivity higher than 1.54 for a single CF. The changes in the fractional electrical resistance with bending were not so dominant as those with tension. This difference was attributed to the action of two cancelling effects, which are the increasing and decreasing fractional electrical resistance due to tension and compression with bending, respectively. On recovery from a large applied bending, the fractional electrical resistance decreased slowly with unloading because of the increase of contacts between the fibers that resulted from the reorganization of ruptured CFs during the recovery. Even the composites incorporating a relatively small CF content showed an irreversible electrical resistance with both tension and bending. However, the strain sensitivity being larger with tension than with bending is ascribed to the difference in their mechanical behaviors. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2447–2453, 2002     

Impact behavior of aramid fiber/glass fiber hybrid composites: The effect of stacking sequence

Aramid fiber/glass fiber hybrid composites were prepared to examine the effect of stacking sequence on the impact behavior of thin laminates. The effect of position of the aramid layer on the impact properties of hybrid composites was investigated using driven dart impact tester. The delamination area and fracture surface of hybrid composites were analyzed for correlation with impact energy. The addition of glass layer to aramid layer reduced the impact resistance of hybrid composite due to the restriction in the deformation of aramid layer. The position of aramid layer resulted in variations in the impact behavior of hybrid composites. When the aramid layer was at the impacted surface, the composite exhibited a higher impact energy. This was attributed to the fact that the flexible layer at the impacted surface in thin laminates can experience larger deformation. In three‐layer composites, the aramid fiber‐reinforced composite ( AAA ) exhibited the highest total impact energy due to high impact energy per delamination area (1EDA) in spite of low delamination area. Aramid fiber and glass fiber‐reinforced composites showed a different impact behavior according to the change of thickness. This was attributed to the difference in the energy absorption at interface between laminae.