Preparation of poly(acrylic acid‐co‐acrylamide)/kaolin and release kinetics of urea from it

A series of poly(acrylic acid‐co‐acrylamide)/kaolin [poly(AA‐co‐Am)/kaolin] composites were prepared by aqueous solution copolymerization of partially neutralized acrylic acid and acrylamide in the presence of kaolin nanopowder, which was synthesized to act as a release carrier of urea fertilizer. The superabsorbent composite was swollen in aqueous solution of urea to load urea, and the effect of urea concentration on the swelling was investigated. Furthermore, the effects of the contents of crosslinker, kaolin, and acrylamide, the neutralization degree of acrylic acid, and temperature, pH, and ionic strength of release medium on water absorbency and diffusion coefficient of urea release from poly(AA‐co‐Am)/kaolin were studied systematically. It was found that urea loading percentage could be adjusted by urea concentration of swelling medium, and urea diffusion coefficient could be regulated through the contents of crosslinker, kaolin, and acrylamide, and the neutralization degree of acrylic acid. Additionally, temperature and ionic strength of release medium may also affect the urea release process. The conclusions obtained could provide theoretical basis for urea diffusion behavior in superabsorbent used in agriculture. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Study on superabsorbent composites. XXI. Synthesis,characterization and swelling behaviors of chitosan‐g‐poly(acrylic acid)/organo‐rectorite nanocomposite superabsorbents

A novel chitosan‐g‐poly(acrylic acid)/organo‐rectorite (CTS‐g‐PAA/OREC) nanocomposite superabsorbent was synthesized by aqueous polymerization using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. Rectorite was organified with four different degree of hexadecyltrimethyl ammonium bromide, and the organification of rectorite was proved by FTIR and XRD. The effect of organification degree of rectorite on water absorbency of CTS‐g‐PAA/OREC with different organo‐rectorite content was investigated. The swelling behaviors in distilled water and various pH solutions were also studied. The results from IR spectroscopy and XRD data show that acrylic acid had been grafted polymerization with chitosan and organo‐rectorite and formed nanocomposite. Introducing organo‐rectorite into the CTS‐g‐PAA polymeric network can improved water absorbency and swelling rate of CTS‐g‐PAA/OREC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis,characterization and swelling behaviors of hydroxyethyl cellulose‐g‐poly(acrylic acid)/attapulgite superabsorbent composite

In this work, a series of novel hydroxyethyl cellulose‐ g‐poly(acrylic acid)/attapulgite (HEC‐g‐PAA/APT) superabsorbent composites were prepared through the graft polymerization of hydroxyethyl cellulose (HEC), partially neutralized acrylic acid (AA), and attapulgite (APT) in aqueous solution, and the composites were characterized by means of Fourier‐transform spectroscopy, scanning electron microscopy, and transmission electronmicroscopy. The effects of polymerization variables including concentrations of the initiator and crosslinker and APT content on water absorbency were studied, and the swelling properties in various pH solutions as well as the swelling kinetics in various saline solutions were also systematically evaluated. Results showed that the introduction of 5 wt% APT into HEC‐g‐PAA polymeric network could improve both water absorbency and water absorption rate of the superabsorbent composites. In addition, the superabsorbent composites retained high water absorbency over a wide pH range of 4–10, and the swelling kinetics of the superabsorbent composites in CaCl₂ and FeCl₃ solutions exhibited a remarkable overshooting phenomenon. POLYM. ENG. SCI., 2010. © 2010 Society of Plastics Engineers     

Hydrogel composites based on linear low‐density polyethylene‐g‐poly (acrylic acid)/Kaolin or halloysite nanotubes

Two series of superabsorbent hydrogel composites were prepared using waste linear low‐density polyethylene, acrylic acid, and two types of clays including kaolin and halloysite nanotube (HNT) through emulsion polymerization. The effects of the clay content on Water absorbency were investigated to obtain a high swelling capacity. The prepared samples were characterized using FTIR, SEM, thermogravimetric analysis, XRD, solid‐state ¹³C Nuclear Magnetic Resonance spectroscopy, and ²⁹Si NMR. SEM characterization of the samples showed that the hydrogel composites have more pores and a higher swelling ratio than the clay‐free hydrogels. The hydrogel composite containing kaolin had higher water absorbency compared to the hydrogel composites with HNT. The swelling behavior of the hydrogel composite was investigated in various saline solutions. The hydrogel composite containing 5 wt % kaolin had the highest water absorbency (760 g/g in distilled water). © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40101.     

Synthesis and properties of a superabsorbent from an ultraviolet‐irradiated waste nameko mushroom substrate and poly(acrylic acid)

To better use the waste nameko mushroom substrate (WNMS) and prevent its pollution into the environment, a novel superabsorbent polymer was synthesized via the UV irradiation copolymerization of acrylic acid and WNMS in the presence of an initiator (dimethoxy‐2‐phenylacetophenone and ammonium persulfate) and crosslinker N,N′‐methylenebisacrylamide. The factors that had an influence on the water absorbency of the superabsorbent polymer were investigated and optimized. Under the optimized conditions, WNMS–poly(acrylic acid) was obtained. Its swelling behaviors, which followed the pseudo‐second‐order swelling kinetic model, were investigated in distilled water (1701 g/g) and a 0.9 wt % NaCl solution (388 g/g). The water absorbency was 1011 g/g in a 0.1 wt % urea solution and 80% amount of urea diffused into the gels. The urea diffusion followed a Fickian diffusion mechanism. Moreover, the product showed excellent water retention capabilities under the condition of high temperature or high pressure. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40471.     

Fast‐swelling oxidized starch phosphate–poly(acrylate/acrylamide/2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid) superabsorbent composite

A fast‐swelling superabsorbent composite was prepared by solution polymerization of acrylate, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid and oxidized starch phosphate. Ethanol, propyl alcohol, butyl alcohol, and sodium bicarbonate were used as foaming agents to produce fast‐swelling characteristics. The structure of the superabsorbent composite was characterized using Fourier transform infrared spectroscopy (FTIR). The influences of the amount of water, acrylamide, 2‐acryloylamino‐2‐methyl‐1‐propanesulfonic acid, oxidized starch phosphate, initiator, and trihydroxymethyl propane glycidol ether, as well as the neutralization degree of acrylic acid on the equilibrium swelling degree and swelling rate of the superabsorbent composite, were investigated. The equilibrium swelling degree of the superabsorbent composite prepared in a 0.9 wt% NaCl aqueous solution was 52 g g^?1, and the swelling rate reached 0.86 mL g^?1 s^?1. The swelling kinetics was also investigated, and the results indicate that swelling of the superabsorbent composites obeys Schott's pseudo second‐order kinetics model. POLYM. ENG. SCI., 56:1267–1274, 2016. © 2016 Society of Plastics Engineers     

Synthesis and swelling characteristics of a pH‐responsive guar gum‐g‐poly(sodium acrylate)/medicinal stone superabsorbent composite

A series of pH‐responsive superabsorbent composites were synthesized by the free‐radical grafting copolymerization of natural guar gum (GG), partially neutralized acrylic acid (NaA), and medicinal stone (MS) using ammonium persulfate (APS) as the initiator and N,N′‐methylene‐bis‐acrylamide (MBA) as the crosslinker. The structure, surface morphologies, and thermal stability of the developed composites were characterized by FTIR spectra, SEM, and TGA techniques, respectively. The effects of various saline, surfactant, and dye solutions on swelling properties were investigated, and the pH‐responsivity was also evaluated. Results indicated that NaA had been grafted onto GG macromolecular chains and MS participated in the polymerization reaction. The incorporation of MS obviously improved the surface structure, thermal stability, water absorption capacity, and rate. Multivalent saline, cationic surfactant, and dye showed more remarkable effect on the water absorption than did monovalent or anionic ones. The composites showed excellent responsive properties and reversible On–Off switching characteristics in various pH buffer solutions, which provided great possibility to extend the application domain of the superabsorbent composites. POLYM. COMPOS., 2011. © 2010 Society of Plastics Engineers     

Gum arabic–acrylic superabsorbing hydrogel hybrids: Studies on swelling rate and environmental responsiveness

The swelling rate and the environmental sensitivity of novel superabsorbent gum arabic–acrylic hydrogel hybrids were investigated. The swelling kinetics of the hydrogel hybrids was studied by means of a Voigt‐based viscoelastic model. The effects of concentration of the initiator, crosslinker, and the monomer ratio on the swelling rate were studied. The superswelling properties of the hydrogel hybrids were evaluated in various environmental pH, salinity and solvent–water mixtures. The optimally prepared hydrogel, MR5, showed a reproducible on–off switching behavior when the swelling medium was alternatively changed between distilled water and alkaline solutions. The hydrogel hybrid MR5 was also tested to be swollen and deswollen alternatively in distilled water and sodium chloride solution. The sorption–desorption behavior was found to be quite repeatable. A similar capability was interestingly observed when a calcium chloride solution with the same molar concentration was used. The swelling changes of the hydrogel hybrid were examined in various water–solvent systems including the aqueous solutions of methanol, ethanol, acetone, ethylene glycol, glycerol, and dimethylsulfoxide. One and/or two volume‐phase transitions were induced by the nonsolvents. The transitions were explained according to the solubility parameters of the solvents and water–solvent mixtures. The swelling–deswelling capability of the hydrogel in alternatively changed solvent–water mixtures was also studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5667–5674, 2006     

Preparation and slow‐release property of a poly(acrylic acid)/attapulgite/sodium humate superabsorbent composite

A novel poly(acrylic acid)/attapulgite (APT)/sodium humate (SH) superabsorbent composite was synthesized through the graft copolymerization reaction of acrylic acid on APT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. Various effects on the water absorbency, including the amounts of the crosslinker, initiator, APT, and SH, were investigated. The superabsorbent composite was characterized with Fourier transform infrared spectroscopy and scanning electron microscopy. The superabsorbent composite synthesized under optimal synthesis conditions with an APT concentration of 20% and an SH concentration of 20% exhibited absorption of 583 g of H₂O/g of sample and 63 g of H₂O/g of sample in distilled water and in a 0.9 wt % NaCl solution, respectively. The slow‐release property of SH from the superabsorbent composite into water was measured, and a test of the water retention of the superabsorbent composite in soil was also carried out experimentally with and without the superabsorbent composite. The results showed that the superabsorbent composite had not only good water retention but also an additional slow‐release property of SH. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 37–45, 2007     

Study on superabsorbent composites. XVIII. Preparation,characterization, and property evaluation of poly(acrylic acid‐co‐acrylamide)/organomontmorillonite/sodium humate superabsorbent composites

A series of novel multifunctional poly (acrylic acid‐co‐acrylamide) (PAA‐AM)/organomontmorillonite (O‐MMT)/sodium humate (SH) superabsorbent composites were synthesized by the graft copolymerization reaction of partially neutralized acrylic acid and acrylamide on O‐MMT micropowder and SH with N,N′‐methylene bisacrylamide as a crosslinker and ammonium persulfate as an initiator in an aqueous solution. The superabsorbent composites were characterized by means of Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, and thermogravimetric analysis. The effect of the relative weight ratio of SH to O‐MMT on the water absorbency was studied, and the results indicated that the best water absorbency of 591 g/g in distilled water was obtained when an O‐MMT content of 20 wt % and an SH content of 30 wt % were incorporated. The superabsorbent composite possessed a good capacity for water retention; even after 30 days, 24.4 wt % of water could still be saved by the sand soil containing 1.0 wt % superabsorbent composite. The results from this study show that the water absorbency of a superabsorbent composite is improved by the simultaneous introduction of O‐MMT and SH into a PAA‐AM network in comparison with the incorporation of only O‐MMT or SH. Also, in comparison with PAA‐AM/MMT/SH, an appropriate amount of O‐MMT can benefit the developed composites with respect to their water absorbency, salt resistance, and capacity for water retention in sand soil. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Superabsorbent composite XXII: Effects of modified sepiolite on water absorbency and swelling behavior of chitosan‐g‐poly(acrylic acid)/sepiolite superabsorbent composite

In this work, a series of chitosan‐g‐poly(acrylic acid)/sepiolite (CTS‐g‐PAA/ST) superabsorbent composites containing raw sepiolite, acid‐activated sepiolite, and cation‐exchanged sepiolite were synthesized by free‐radical graft polymerization in aqueous solution, using N,N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The effects of raw sepiolite, acid‐activated sepiolite, and cation‐exchanged sepoilite on equilibrium water absorbency, swelling rate, and swelling behavior in different pH value solution of superabsorbent composites were systematically investigated. The results from FTIR spectra showed that chitosan and sepiolite participated in graft polymerization reaction with acrylic acid. The introduction of acid‐activated and cation‐exchanged sepiolite into chitosan‐g‐poly(acrylic acid) polymeric network could improve water absorbency and swelling rate compared with that of the raw sepiolite. All prepared samples have similar swelling behavior in different pH solutions and the equilibrium water absorbencies of samples keep roughly constant in the pH range from 4 to 12. POLYM. COMPOS., 2010. © 2009 Society of Plastics Engineers     

Synthesis and properties of carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide) as a novel cellulose‐based superabsorbent

A new cellulose‐based superabsorbent polymer, carboxymethyl cellulose‐graft‐poly(acrylic acid‐co‐acrylamide), was prepared by the free‐radical grafting solution polymerization of acrylic acid (AA) and acrylamide (AM) monomers onto carboxymethyl cellulose (CMC) in the presence of N,N′‐methylenebisacrylamide as a crosslinker with a redox couple of potassium persulfate and sodium metabisulfite as an initiator. The influences of reaction variables such as the initiator content, crosslinker content, bath temperature, molar ratio of AA to AM, and weight ratio of the monomers to CMC on the water absorbency of the carboxymethylcellulose‐graft‐poly(acrylic acid‐co‐acrylamide) copolymer were investigated. The copolymer's structures were characterized with Fourier transform infrared spectroscopy. The optimum reaction conditions were obtained as follows: the bath temperature was 50°C; the molar ratio of AA to AM was 3 : 1; the mass ratio of the monomers to CMC was 4 : 1; and the weight percentages of the crosslinker and initiator with respect to the monomers were 0.75 and 1%, respectively. The maximum water absorbency of the optimized product was 920 g/g for distilled water and 85 g/g for a 0.9 wt % aqueous NaCl solution. In addition, the superabsorbent possessed good water retention and salt resistance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1382–1388, 2007     

Superabsorbent composite. XIII. Effects of Al3+‐attapulgite on hydrogel strength and swelling behaviors of poly(acrylic acid)/Al3+‐attapulgite superabsorbent composites

Al³⁺‐attapulgite (Al³⁺‐APT) was prepared by treating attapulgite (APT) with AlCl₃ aqueous solution of various concentrations. The poly(acrylic acid)/Al³⁺‐attapulgite (PAA/Al³⁺‐APT) superabsorbent composite was prepared by reaction of partly neutralized acrylic acid, and Al³⁺‐APT in aqueous solution using N, N′‐methylenebisacrylamide as a crosslinker and ammonium persulfate as an initiator. The surface morphology of the composite was investigated by SEM, and the Al³⁺‐APT composite generated a relatively planar surface comparing the nature APT. The effects of Al³⁺‐APT on hydrogel strength and swelling behaviors, such as equilibrium water absorbency, swelling rate, and reswelling capability, of the superabsorbent composites were also studied. The hydrogel strength and reswelling capability were improved, however, the equilibrium water absorbency and swelling rate decreased with increasing AlCl₃ solution concentration. The equilibrium water absorbency firstly increased, and then decreased with increasing Al³⁺‐APT content. The results indicate that Al³⁺‐APT acts as an assistant crosslinker in the polymeric network, which has great influences on hydrogel strength and swelling behaviors of the PAA/Al³⁺‐APT superabsorbent composites. POLYM. ENG. SCI., 47:619–624, 2007. © 2007 Society of Plastics Engineers.     

Synthesis and properties of a novel superabsorbent polymer composite from microwave irradiated waste material cultured Auricularia auricula and poly (acrylic acid‐co‐acrylamide)

A novel superabsorbent polymer composite was successfully synthesized from waste material cultured Auricularia auricula (WMCAA) and poly (acrylic acid‐co‐acrylamide) (P(AA‐co‐AM)) using microwave irradiation. Optimal synthesis conditions were determined by investigating the water absorbency of the superabsorbent composite. The effects associated with weight ratios of WMCAA, acrylamide (AM) monomers, initiators, and acrylic acid (AA) crosslinkers, as well as the degree of neutralization of AA were examined. The maximum water absorbencies were found to be 1548 g/g (distilled water) and 72 g/g (0.9% NaCl solution). Fourier transform infrared spectroscopy (FTIR) was applied to determine the molecular structure of the superabsorbent composite, and scanning electron microscopy (SEM) was used to demonstrate the characteristic compact and porous structure of the material. Further studies conducted via transmission electron microscopy (TEM) revealed the formation of a novel interpenetrating polymer network structure. Thermogravimetry/differential thermal (TG/DTG) analysis demonstrated improved thermal stability in the composite material compared with WMCAA. Additionally, high water absorption rates observed in the polymer during the swelling process indicated first‐order kinetics. The water absorption and adsorption of the superabsorbent composite were studied in a variety of fertilizer solutions, revealing an indirect relationship between water absorbing ability and fertilizer concentration. Conversely, a direct relationship was observed between absorbed fertilizer and fertilizer concentration. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 3674–3681, 2013     

Waste polystyrene foam‐graft‐acrylic acid/montmorillonite superabsorbent nanocomposite

A novel superabsorbent nanocomposite based on partially neutralized acrylic acid, waste polystyrene foam, and sodium type montmorillonite (Na‐MMT) powder was synthesized through emulsion polymerization using N, N′‐methylenebisacrylamide as a crosslinker, 2,2′‐azo‐bisiso‐butyronitrile, ammonium persulfate, and sodium sulfite as mixed redox initiators. The effects of such factors as amount of Na‐MMT, crosslinker, initiator, and neutralization degree on water absorbency of the superabsorbent were investigated. The composites were characterized by Fourier transform infrared spectroscope, X‐ray diffraction, thermo gravimetric analysis, and scanning electron microscope. The results show that acrylic acid monomer successfully grafted onto the polystyrene chain, the layers of Na‐MMT were exfoliated and dispersed in the composite at nano size after copolymerization. The introduction of waste polystyrene foam in the composite increased the water absorbency rate. The addition of Na‐MMT not only enhanced the thermal stability of the composites but also increased its water absorbency, and the optimal water absorbencies of distilled water and saline water (w_NaCl = 0.9%) of the nanocomposites were more than 1180 g H₂O/g and 72.6 g H₂O/g, respectively. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2341–2349, 2007     

Utilization of waste polystyrene and starch for superabsorbent composite preparation

A superabsorbent composed of waste polystyrene, starch, and acrylic acid was prepared through emulsion polymerization. The effects of major factors such as starch, acrylic acid, initiator, crosslinker, and bentonite contents and the neutralization degree of acrylic acid on water absorbency were investigated to obtain optimum conditions with high swelling capacity. The superabsorbent hydrogel was characterized by scanning electron microscope (SEM), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA). The FTIR results confirmed that the grafting polymerization took place among the polystyrene, acrylic acid, starch, and bentonite. The introduction of bentonite particles into the polystyrene‐g‐poly (acrylic acid)‐co‐starch system could increase the water absorbency. The superabsorbent composite containing 3 wt % bentonite had the highest water absorbency (500 g/g in distilled water and 49 g/g in 0.9 wt % NaCl solution). © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

GG-g-PAA/LOESS复合高吸水性树脂的制备与性能

以瓜尔胶(GG)、丙烯酸(AA)和黄土(LOESS)为原料,过硫酸铵(APS)为引发剂,N,N'-亚甲基双丙烯酰胺(MBA)为交联剂,采用水溶液聚合法制备了瓜尔胶接枝聚丙烯酸/黄土(GG-g-PAA/LOESS)复合高吸水性树脂。采用FTIR和SEM对其结构进行了表征,研究了LOESS的添加量对复合高吸水性树脂的溶胀能力和溶胀动力学的影响,考察了复合高吸水性树脂的保水性能、反复溶胀性以及在不同pH溶液中的吸水性能。结果表明,瓜尔胶、丙烯酸和LOESS发生了接枝共聚,体系中引入LOESS能够显著提高复合高吸水性树脂的吸水性能。当LOESS的质量分数为2%时,该树脂最高吸水倍率可达602 g/g,室温下6 d后,其保水率仍达28%,5次反复溶胀,吸水倍率仍能保持初始时的49%。此外,该复合高吸水性树脂还表现出优异的pH稳定性。     

Preparation and water absorbency of a novel poly(acrylate‐co‐acrylamide)/vermiculite superabsorbent composite

A novel poly(acrylate‐co‐acrylamide)/expanded vermiculite (EVMT) superabsorbent composite was synthesized by aqueous solution polymerization method. The water absorbency of the superabsorbent composite still reaches 850 g/g when 50 wt % EVMT is added, which is significant in decreasing the production cost of the superabsorbent composites. By controlling the molar ratio of acrylic acid monomer and acrylamide monomer, and neutralization degree of acrylic acid, the hydrophilic groups on the composite can be adjusted, and it is found that the collaborative absorbent effect of ? CONH₂, ? COOK, and ? COOH groups is superior to that of single ? CONH₂, ? COOK, or ? COOH group. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 735–739, 2007     

Salep‐g‐poly(sodium acrylate)/alumina superabsorbent hydrogel composite as a smart material: Irradiation synthesis and investigation of its swelling behavior

A novel environmentally sensitive superabsorbent composite was synthesized via the gamma (γ)‐irradiation graft copolymerization of sodium acrylate onto a homogeneous blend of natural salep and alumina in an aqueous medium. The reaction parameters (i.e., acrylic acid amount, neutralization percentage, alumina/salep weight ratio, and γ‐irradiation total dose) affecting the water absorbency of the hydrogel composite were optimized by using a systematic method in order to achieve a composite with as high a swelling capacity as possible. FTIR spectroscopy was used to confirm the structure of the final product. Morphology of the synthesized composite was examined by scanning electron microscopy. The swelling behavior of the optimum superabsorbent composite was measured in various environments, and the results showed excellent on–off switching behaviors which made this novel smart composite material a nominee that can potentially be used in agriculture, pharmaceutics, and biosensors. J. VINYL ADDIT. TECHNOL., 2011. © 2011 Society of Plastics Engineers     

Preparation and Swelling Behavior of Fast‐Swelling Superabsorbent Hydrogels Based On Starch‐g‐Poly(acrylic acid‐co‐sodium acrylate)

Summary: A novel fast‐swelling porous superabsorbent hydrogel was prepared by grafting acrylic acid onto corn starch through free‐radical polymerization in aqueous solution using N,N′‐methylenebisacrylamide as a crosslinker, ammonium persulfate as an initiator, sodium dodecyl sulfate and p‐octyl poly(ethylene glycol)phenyl ether as pore‐forming agents. The graft polymerization and surface morphology of the porous superabsorbents were characterized by FTIR and SEM. The results indicate that the porous superabsorbents were endowed with higher equilibrium water absorbency and faster swelling rate (they needed only 10 min to reach 90% of their equilibrium water absorbency) compared with the nonporous superabsorbents. The dewatering method employed had a significant influence on the swelling behavior of the superabsorbents and dewatering agents were useful to preserve the pores formed during the polymerization process.

The equilibrium water absorbency in distilled water, for the porous and non‐porous starch‐g‐poly(acrylic acid‐co‐sodium acrylate) superabsorbent hydrogels dried through different procedures.