Effect of Low-Pressure Nitrogen DC Plasma Treatment on the Surface Properties of Biaxially Oriented Polypropylene, Poly (Methyl Methacrylate) and Polyvinyl Chloride Films

In this study, commercial biaxially oriented polypropylene (BOPP), polyvinyl chloride (PVC) and poly (methyl methacrylate) (PMMA) films were treated with nitrogen plasma over different exposure times in a Pyrex tube surrounded by a DC variable magnetic field. The chemical changes that appeared on the surface of the samples were investigated using Fourier transform infrared (FT-IR) spectroscopy and attenuated total reflectance Fourier transform infrared (ATR- FTIR) spectroscopy after treatment for 2 min, 4 min and 6 min in a nitrogen plasma chamber. Effects of the plasma treatment on the surface topographies and contact angles of the untreated and plasma treated films were also analyzed by atomic force microscopy (AFM) and a contact angle measuring system. The results show that the plasma treated films become more hydrophilic with an enhanced wettability due to the formation of some new polar groups on the surface of the treated films. Moreover, at higher exposure times, the total surface energy in all treated films increased while a reduction in contact angle occurred. The behavior of surface roughness in each sample was completely different at higher exposure times.     

Polymer Surface Treatment by Atmospheric Pressure Low Temperature Surface Discharge Plasma： Its Characteristics and Comparison with Low Pressure Oxygen Plasma Treatment

The polymer treatment with a low-temperature plasma jet generated on the atmospheric pressure surface discharge （SD） plasma is performed. The change of the surface property over time, in comparison with low pressure oxygen （O2） plasma treatment, is examined. As one compares the treatment by atmospheric pressure plasma to that by the low pressure O2 plasma of PS （polystyrene） the treatment effects were almost in complete agreement. However, when the atmospheric pressure plasma was used for PP（polypropylene）, it produced remarkable hydrophilic effects.     

Influence of Chemical Precleaning on the Plasma Treatment Efficiency of Aluminum by RF Plasma Pencil

This paper is aimed to show the influence of initial chemical pretreatment prior to subsequent plasma activation of aluminum surfaces.The results of our study showed that the state of the topmost surface layer（i.e.the surface morphology and chemical groups）of plasma modified aluminum significantly depends on the chemical precleaning.Commonly used chemicals（isopropanol,trichlorethane,solution of Na OH in deionized water）were used as precleaning agents.The plasma treatments were done using a radio frequency driven atmospheric pressure plasma pencil developed at Masaryk University,which operates in Ar,Ar/O₂ gas mixtures.The effectiveness of the plasma treatment was estimated by the wettability measurements,showing high wettability improvement already after 0.3 s treatment.The effects of surface cleaning（hydrocarbon removal）,surface oxidation and activation（generation of OH groups）were estimated using infrared spectroscopy.The changes in the surface morphology were measured using scanning electron microscopy.Optical emission spectroscopy measurements in the near-to-surface region with temperature calculations showed that plasma itself depends on the sample precleaning procedure.     

Influence of air addition on surface modification of polyethylene terephthalate treated by an atmospheric pressure argon plasma brush

An atmospheric pressure argon plasma brush with air addition is employed to treat polyethylene terephthalate(PET) surface in order to improve its hydrophilicity. Results indicate that the plasma plume generated by the plasma brush presents periodically pulsed current despite a direct current voltage is applied. Voltage-current curve reveals that there is a transition from a Townsend discharge regime to a glow one during one discharge period. Optical emission spectrum indicates that more oxygen atoms are produced in the plume with increasing air content, which leads to the better hydrophilicity of PET surface after plasma treatment. Besides,an aging behavior is also observed. The hydrophilicity improvement is attributed to the production of oxygen functional groups, which increase in number with increasing air content.Moreover, some grain-like structures are observed on the treated PET surface, and its mean roughness increases with increasing air content. These results are of great importance for the hydrophilicity improvement of PET surface with a large scale.     

The Solubility of Natural Cellulose After DBD Plasma Treatment

Natural cellulose was treated by an atmospheidc DBD plasma. The solubility of cellulose in a diluted alkaline solution after the plasma treatment was investigated. The properties were characterized by X-ray photoelectron spectroscopy （XPS）, Fourier-transform infrared spectroscopy （FTIR） and scanning electron microscopy （SEM）. The results indicated that the surface of cellulose treated by the argon DBD plasma was significantly etched, and the relevant force of hydrogen bonding was decreased. This might be the essential reason for the solubility improvement of natural cellulose in the diluted alkaline solution. Through a comparison of two discharge modes, the atmospheric DBD plasma gun and the parallel plate capacitively coupled DBD plasma, it was found that the atmospheric DBD plasma gun was more effective in fragmentizing the cellulose due to its production of a high energy plasma based on its special structure.     

Non-Thermal Atmospheric Plasma: Can it Be Taken as a Common Solution for the Surface Treatment of Dental Materials?

This study aimed to evaluate the surface roughness and wetting properties of various dental prosthetic materials after different durations of non-thermal atmospheric plasma(NTAP)treatment.One hundred and sixty discs of titanium(Ti)(n:40),cobalt chromium(Co-Cr)(n:40),yttrium stabilized tetragonal zirconia polycrystals(Y-TZP)(n:40)and polymethylmethacrylate(PMMA)(n:40)materials were machined and smoothed with silicon carbide papers.The surface roughness was evaluated in a control group and in groups with different plasma exposure times [1-3-5 s].The average surface roughness(Ra)and contact angle(CA)measurements were recorded via an atomic force microscope(AFM)and tensiometer,respectively.Surface changes were examined with a scanning electron microscope(SEM).Data were analyzed with two-way analysis of variance(ANOVA)and the Tukey HSD test α=0.05).According to the results,the NTAP surface treatment significantly affected the roughness and wettability properties(P 0.05).SEM images reveal that more grooves were present in the NTAP groups.With an increase in the NTAP application time,an apparent increment was observed for Ra,except in the PMMA group,and a remarkable reduction in CA was observed in all groups.It is concluded that the NTAP technology could enhance the roughening and wetting performance of various dental materials.     

Improving Hydrophobicity of Glass Surface Using Dielectric Barrier Discharge Treatment in Atmospheric Air

Non-thermal plasmas under atmospheric pressure are of great interest in industrial applications, especially in material surface treatment. In this paper, the treatment of a glass surface for improving hydrophobicity using the non-thermal plasma generated by dielectric barrier discharge （DBD） at atmospheric pressure in ambient air is conducted, and the surface properties of the glass before and after the DBD treatment are studied by using contact angle measurement, surface resistance measurement and wet flashover voltage tests. The effects of the applied voltage and time duration of DBD on the surface modification are studied, and the optimal conditions for the treatment are obtained. It is found that a layer of hydrophobic coating is formed on the glass surface after spraying a thin layer of silicone oil and undergoing the DBD treatment, and the improvement of hydrophobicity depends on DBD voltage and treating time. It seems that there exists an optimum treating time for a certain applied voltage of DBD during the surface treatment, The test results of thermal aging and chemical aging show that the hydrophobic layer has quite stable characteristics. The interaction mechanism between the DBD plasma and the glass surface is discussed. It is concluded that CHa and large molecule radicals can react with the radicals in the glass surface to replace OH, and the hydrophobicity of the glass surface is improved accordingly.     

Uniformity of Plasma Density and Film Thickness of Coatings Deposited Inside a Cylindrical Tribe by Radio Frequency Sputtering

Plasma surface modification of the inner wall of a slender tube is quite difficult to achieve using conventional means. In the work described here, an inner coaxial radio frequency （RF） copper electrode is utilized to produce the plasma and also acts as the sputtered target to deposit copper films in a tube. The influence of RF power, gas pressure, and bias voltage on the distribution of plasma density and the uniformity of film thickness is investigated. The experimental results show that the plasma density is higher at the two ends and lower in the middle of the tube. A higher RF power and pressure as well as larger tube bias lead to a higher plasma density. Changes in the discharge parameter only affect the plasma density uniformity slightly. The variation in the film thickness is consistent with that of the plasma density along the tube axis for different RF power and pressure. Although the plasma density increases with higher tube biases, there is an optimal bias to obtain the highest deposition rate. It can be attributed to the reduction in self-sputtering of the copper electrode and re-sputtering effects of the deposited film at higher tube biases.     

Surface Treatment of Polypropylene Films Using Dielectric Barrier Discharge with Magnetic Field

Atmospheric pressure non-thermal plasma is of interest for industrial applications. In this study, polypropylene (PP) films are modified by a dielectric barrier discharge (DBD) with a non-uniform magnetic field in air at atmospheric pressure. The surface properties of the PP films before and after a DBD treatment are studied by using contact angle measurement, atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). The effect of treatment time on the surface modification with and without a magnetic field is investigated. It is found that the hydrophilic improvement depends on the treatment time and magnetic field. It is also found that surface roughness and oxygen-containing groups are introduced onto the PP film surface after the DBD treatment. Surface roughness and oxygen-containing polar functional groups of the PP films increase with the magnetic induction density. The functional groups are identified as C-O, C=O and O-C=O by using XPS analysis. It is concluded that the hydrophilic improvement of PP films treated with a magnetic field is due to a greater surface roughness and more oxygen-containing groups.     

Surface plasmon oscillations in a semi-bounded semiconductor plasma

We study the dispersion properties of surface plasmon (SP) oscillations in a semi-bounded semiconductor plasma with the effects of the Coulomb exchange (CE) force associated with the spin polarization of electrons and holes as well as the effects of the Fermi degenerate pressure and the quantum Bohm potential.Starting from a quantum hydrodynamic model coupled to the Poisson equation,we derive the general dispersion relation for surface plasma waves.Previous results in this context are recovered.The dispersion properties of the surface waves are analyzed in some particular cases of interest and the relative influence of the quantum forces on these waves are also studied for a nano-sized GaAs semiconductor plasma.It is found that the CE effects significantly modify the behaviors of the SP waves.The present results are applicable to understand the propagation characteristics of surface waves in solid density plasmas.     

A low power 50 Hz argon plasma for surface modification of polytetrafluoroethylene

The characteristics of a low power 50 Hz argon plasma for surface treatment of polytetrafluoroethylene (PTFE) film is presented in this article. The current–voltage behavior of the discharge and time-varying intensity of the discharge showed that a DC glow discharge was generated in reversed polarity at every half-cycle. At discharge power between 0.5 and 1 W, the measured electron temperature and density were 2–3 eV and ∼10⁸ cm⁻³, respectively. The optical emission spectrum of the argon plasma showed presence of some 'impurity species' such as OH, N₂ and H, which presumably originated from the residual air in the discharge chamber. On exposure of PTFE films to the argon glow plasma at pressure 120 Pa and discharge power 0.5 to 1 W, the water contact angle reduced by 4% to 20% from the original 114° at pristine condition, which confirms improvement of its surface wettability. The increase in wettability was attributed to incorporation of oxygen-containing functional groups on the treated surface and concomitant reduction in fluorine as revealed by the XPS analysis and increase in surface roughness analyzed from the atomic force micrographs. Ageing upon storage in ambient air showed retention of the induced increase in surface wettability.     

Modeling tungsten response under helium plasma irradiation: a review

Tungsten, a leading candidate for plasma-facing materials (PFM) in future fusion devices, will be exposed to high-flux low-energy helium plasma under the anticipated fusion operation conditions. In the past two decades, experiments have revealed that exposure to helium plasma strongly modifies the surface morphology and hence the sputtering, thermal and other properties of tungsten, posing a serious danger to the performance and lifetime of tungsten and the steady-state operation of plasma. In this article, we provide a review of modeling and simulation efforts on the long-term evolution of helium bubbles, surface morphology, and property changes of tungsten exposed to low-energy helium plasma. The current gap and outstanding challenges to establish a predictive modeling capability for dynamic evolution of PFM are discussed.