pH and thermo‐responsive poly(N‐isopropylacrylamide) copolymer grafted to poly(ethylene glycol)

pH and thermo‐responsive graft copolymers are reported where thermo‐responsive poly(N‐isopropylacrylamide) [poly(NIPAAm), poly A ], poly(N‐isopropylacrylamide‐co‐2‐(diethylamino) ethyl methacrylate) [poly(NIPAAm‐co‐DEA), poly B ], and poly(N‐isopropylacrylamide‐co‐methacrylic acid) [poly(NIPAAm‐co‐MAA), poly C ] have been installed to benzaldehyde grafted polyethylene glycol (PEG) back bone following introducing a pH responsive benzoic‐imine bond. All the prepared graft copolymers for PEG‐g‐poly(NIPAAm) [ P‐N1 ], PEG‐g‐poly(NIPAAm‐co‐DEA) [ P‐N2 ], and PEG‐g‐poly(NIPAAm‐co‐MAA) [ P‐N3 ] were characterized by ¹H‐NMR to assure the successful synthesis of the expected polymers. Molecular weight of all synthesized polymers was evaluated following gel permeation chromatography. The lower critical solution temperature of graft copolymers varied significantly when grafted to benzaldehyde containing PEG and after further functionalization of copolymer based poly(NIPAAm). The contact angle experiment showed the changes in hydrophilic/hydrophobic behavior when the polymers were exposed to different pH and temperature. Particle size measurement investigation by dynamic light scattering was performed to rectify thermo and pH responsiveness of all prepared polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fabrication of pH‐ or temperature‐responsive single wall carbon nanotubes via a graft from photopolymerization

An ultraviolet light initiated “graft from” polymerization method to fabricate polymer‐functionalized single wall carbon nanotubes (SWNTs) with pendant pH‐ and temperature‐responsive polymer chains is utilized. The attached polymer chains, formed from methacrylic acid and poly(ethylene glycol) methyl ether methacrylate monomers, are well established for its pH‐responsive swelling/deswelling behavior. This special property was utilized here to control the aqueous dispersibility of the carbon nanotubes. Furthermore, poly(N‐isopropylacrylamide), a temperature‐responsive polymer, was utilized in the fabrication of SWNTs whose dispersibility was dependent on solution temperature. The morphology of the polymer‐functionalized carbon nanotubes was characterized by scanning electron microscopy (SEM) before and after functionalization. Environmental SEM was used to further characterize the morphology of the functionalized SWNTs. In addition, covalent bonding of the polymer to the carbon nanotube surface was established using Raman and Fourier transform infrared spectroscopic techniques. The physical and chemical properties of the functionalized nanotubes were further characterized by energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis, and differential scanning calorimetry. © 2011 American Institute of Chemical Engineers AIChE J, 58: 2980–2986, 2012     

Dual‐stimuli‐responsive polymer‐coated mesoporous silica nanoparticles used for controlled drug delivery

In this article, a temperature‐ and pH‐responsive delivery system based on block‐copolymer‐capped mesoporous silica nanoparticles (MSNs) is presented. A poly[2‐(diethylamino)ethyl methacrylate)] (PDEAEMA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAM) shell on MSNs was obtained through the surface‐initiated atom transfer radical polymerization. The block copolymer PDEAEMA‐b‐PNIPAM showed both temperature‐ and pH‐responsive properties. The release of the loaded model molecules from PDEAEMA‐b‐PNIPAM‐coated MSNs could be controlled by changes in the temperature or pH value of the medium. The as‐desired drug‐delivery carrier may be applied to biological systems in the future. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42395.     

Morphology and photophysical properties of a thermally responsive fluorescent material based on a rod‐coil tri‐block copolymer

A thermally responsive rod‐coil poly[poly (N‐isopropylacrylamide)‐b‐polyfluorene‐b‐poly(N‐isopropylacrylamide)] triblock copolymer has been successfully synthesized by atom transfer radical polymerization from an end‐functionalized macroinitiator. The thermochromic behavior and relevant morphology of this polymer were investigated by UV‐vis spectra, DLS, and AFM, respectively, at various temperatures. A thermally responsive fluorescent material was achieved facilely by combining the optically active polyfluorene with temperature‐responsive poly(N‐isopropylacrylamide). All the measurements demonstrated that in the region of 25–45°C, the polymer underwent a phase transition and the corresponding change in optical properties in its water solution. However, the polymer did not show completely reversible behavior upon heating and cooling. On the basis of the comparison with two other thermally responsive conjugated polymers in literatures, a tentative mechanism has been proposed that π–π interaction induced rigid segments to remain chain conformation and packing styles as in collapsed state. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Monodisperse nanoparticles of poly(ethylene glycol) macromers and N‐isopropyl acrylamide for biomedical applications

Poly(ethylene glycol)‐based nanoparticles have received significant attention in the field of biomedicine. When they are copolymerized with pH‐ or temperature‐sensitive comonomers, their small size allows them to respond very quickly to changes in the environment, including changes in the pH, ionic strength, and temperature. In addition, the high surface‐to‐volume ratio makes them highly functionalized. In this work, nanoparticles composed of temperature‐sensitive poly(N‐isopropylacrylamide), poly(ethylene glycol) 400 dimethacrylate, and poly(ethylene glycol) 1000 methacrylate were prepared by a thermally initiated, free‐radical dispersion polymerization method. The temperature‐responsive behavior of the hydrogel nanoparticles was characterized by the study of their particle size with photon correlation spectroscopy. The size of the nanoparticles varied from 200 to 1100 nm and was a strong function of the temperature of the system, from 5 to 40°C. The thermal, structural, and morphological characteristics were also investigated. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1678–1684, 2003     

PEGylated hollow pH‐responsive polymeric nanocapsules for controlled drug delivery

Novel pH‐responsive PEGylated hollow nanocapsules (HNCaps) were fabricated through a combination of distillation–precipitation copolymerization and surface thiol–ene ‘click’ grafting reaction. For this purpose, SiO₂ nanoparticles were synthesized using the Stöber approach, and then modified using 3‐(trimethoxysilyl)propyl methacrylate (MPS). Afterward, a mixture of triethyleneglycol dimethacrylate (as crosslinker), acrylic acid (AA; as pH‐responsive monomer) and MPS‐modified SiO₂ nanoparticles (as sacrificial template) was copolymerized using the distillation–precipitation approach to afford SiO₂@PAA core–shell nanoparticles. The SiO₂ core was etched from SiO₂@PAA using HF solution, and the obtained PAA HNCaps were grafted with a thiol‐end‐capped poly(ethylene glycol) (PEG) through a thiol–ene ‘click’ reaction to produce PAA‐g‐PEG HNCaps. The fabricated HNCaps were loaded with doxorubicin hydrochloride (DOX) as a model anticancer drug, and their drug loading and encapsulation efficiencies as well as pH‐dependent drug release behavior were investigated. The anticancer activity of the drug‐loaded HNCaps was extensively evaluated using MTT assay against human breast cancer cells (MCF7). The cytotoxicity assay results as well as superior physicochemical and biological features of the fabricated HNCaps mean that the developed DOX‐loaded HNCaps have excellent potential for cancer chemotherapy. © 2020 Society of Chemical Industry     

Smart carboxymethylchitosan hydrogels that have thermo‐ and pH‐responsive properties

Thermo‐responsive poly(N‐isopropylacrylamide) (poly(NIPAAm)) and pH‐responsive poly(N,N′‐diethylaminoethyl methacrylate) (poly(DEAEMA)) polymers were grafted to carboxymethylchitosan (CMC) via radical polymerization to form highly water swellable hydrogels with dual responsive properties. Ratios of CMC, NIPAAm to DEAEMA used in the reactions were finely adjusted such that the thermo and pH responsiveness of the hydrogels was retained. Scanning electron microscopy (SEM) indicated the formation of an internal porous structure for the swollen CMC hydrogels upon incorporation of poly(NIPAAm) and poly(DEAEMA). Effect of temperature and pH changes on water swelling properties of the hydrogels was investigated. It was found that the water swelling of the hydrogels was enhanced when the solution pH was under basic conditions (pH 11) or the temperature was below its lower critical solution temperature (LCST). These responsive properties can be used to regulate releasing rate of an entrapped drug from the hydrogels, a model drug, indomethacin was used to demonstrate the release. These smart and nontoxic CMC‐based hydrogels show great potential for use in controlled drug release applications with controllable on‐off switch properties. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41505.     

Synthesis of polymer–inorganic hybrid nanoparticles via radical polymerization initiated by surface‐immobilized photoiniferter

Polymer–inorganic hybrid nanoparticles were prepared through radical photo‐polymerization of methyl methacrylate initiated by N,N‐diethyldithiocarbamyl surface functionalized silica nanoparticles under UV irradiation at ambient temperature. IR analysis and UV spectroscopy confirmed the occurrence of Et₂NCS₂—end groups on the resulting poly(methyl methacrylate), and the morphology of these hybrid nanoparticles was observed directly by means of tapping mode atomic force microscopy (AFM). Copyright © 2003 Society of Chemical Industry     

A novel route for synthesis of temperature responsive nanoparticles

We report the preparation of responsive silica nanoparticles by reaction of epoxy modified silica with stimuli responsive poly (acrylic acid‐N‐isopropylacrylamide) (poly (AA‐co‐NIPAAm)). A series of copolymers of poly (AA‐co‐NIPAAm) were synthesized by a novel route, employing solid state condensation of polyacrylic acid and isopropyl amine in different feed ratios (44 mol %–100 mol % AA). The structure of the copolymers was characterized by FT‐IR, ¹H‐NMR. The lower critical solution temperature (LCST) was found to vary with the copolymer composition. The pH dependence of the LCST was also observed, and the copolymers exhibited a higher LCST at neutral pH than at acidic pH (4–5). Selected copolymers were used to prepare responsive core‐shell particles. Silica nanoparticles modified using glycidoxy propyl trimethoxy propyl silane were reacted with the responsive copolymer to form responsive core‐shell particles. The influence of reaction conditions on the modification of silica particles and reaction with responsive copolymers was investigated. The hydrodynamic behavior of the synthesized thermo responsive nanoparticles was also studied. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of novel thermo‐ and redox‐sensitive polypeptide hydrogels

Multi‐responsive hydrogels have recently received considerable attention for bioapplications. Here, novel temperature‐ and redox‐responsive polypetide hydrogels have been developed. Thermo‐sensitive hydrogels based on poly(ethyleneglycol)‐block ‐poly(γ‐propargyl‐l ‐glutamate) (PEG‐PPLG ) were first synthesized by the ring opening polymerization of γ‐propargyl‐l ‐glutamate N ‐carboxyanhydride (PLG‐NCA ) with amino group terminated PEG monomethyl ether (mPEG‐NH₂ ) as macroinitiator and were then functionalized via the ‘thiol‐yne’ click reaction between the propargyl pendents and the thiol‐containing 1‐propanethiol. The sol ? gel phase transition of the obtained copolymer aqueous solution in response to temperature change was studied. The mass loss of the hydrogel in vitro was accelerated in the presence of H₂O₂ , exhibiting a redox‐responsive property. Further, the methyl thiazolyl tetrazolium viability results revealed that this polypetide hydrogel has excellent biocompatibility, presenting potential applications in the biomedical field. © 2016 Society of Chemical Industry     

Temperature,pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for controlled release

Temperature, pH, and reduction triple‐stimuli‐responsive inner‐layer crosslinked micelles as nanocarriers for drug delivery and release are designed. The well‐defined tetrablock copolymer poly(polyethylene glycol methacrylate)–poly[2‐(dimethylamino) ethyl methacrylate]–poly(N‐isopropylacrylamide)–poly(methylacrylic acid) (PPEGMA‐PDMAEMA‐PNIPAM‐PMAA) is synthesized via atom transfer radical polymerization, click chemistry, and esterolysis reaction. The tetrablock copolymer self‐assembles into noncrosslinked micelles in acidic aqueous solution. The core‐crosslinked micelles, shell‐crosslinked micelles, and shell–core dilayer‐crosslinked micelles are prepared via quaternization reaction or carbodiimide chemistry reaction. The crosslinked micelles are used as drug carriers to load doxorubicin (DOX), and the drug encapsulation efficiency with 20% feed ratio reached 59.2%, 73.1%, and 86.1%, respectively. The cumulative release rate of DOX is accelerated by single or combined stimulations. The MTT (3‐(4,5‐Dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide) assay verifies that the inner‐layer crosslinked micelles show excellent cytocompatibility, and DOX‐loaded micelles exhibit significantly higher inhibition for HepG2 cell proliferation. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46714.     

Morphology and properties of poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐para‐phenylene vinylene]/silica nanoparticle hybrid films

Poly[2‐methoxy‐5‐(2′‐ethyl‐hexyloxy)‐para‐phenylene vinylene] (MEH‐PPV)/silica nanoparticle hybrid films were prepared and characterised. Three kinds of materials were compared: parent MEH‐PPV, MEH‐PPV/silica (hybrid A films), and MEH‐PPV/coupling agent MSMA/silica (hybrid B films), in which MSMA is 3‐(trimethoxysilyl) propyl methacrylate. It was found that the hybrid B films could significantly prevent macrophase separation, as evidenced by scanning electron and fluorescence microscopy. Furthermore, the thermal characteristics of the hybrid films were largely improved in comparison with the parent MEH‐PPV. The UV‐visible absorption spectra suggested that the incorporation of MSMA‐modified silica into MEH‐PPV could confine the polymer chain between nanoparticles and thus increase the conjugation length. The photoluminescence (PL) studies also indicated enhancement of the PL intensity and quantum efficiency by incorporating just 2 wt% of MSMA‐modified silica into MEH‐PPV. However, hybrid A films did not show such enhancement of optoelectronic properties as the hybrid B films. The present study suggests the importance of the interface between the luminescent organic polymers and the inorganic silica on morphology and optoelectronic properties. Copyright © 2004 Society of Chemical Industry     

Preparation and aqueous solution behavior of a ph‐responsive branched copolymer based on 2‐(diethylamino)ethyl methacrylate

pH‐Responsive amphiphilic branched copolymers were prepared from poly(ethylene glycol) methyl ether methacrylate (PEGMA), 2‐(diethylamino)ethyl methacrylate (DEAEMA), 2‐(tert‐butylamino)ethyl methacrylate (tBAEMA), and ethylene glycol dimethacrylate (EGDMA) utilizing a thiol‐modified free radical polymerization. The molecular structures of copolymers were confirmed by proton nuclear magnetic resonance spectroscopy (¹H NMR) and triple‐detection gel permeation chromatography (tri‐GPC). The aqueous solution behaviors of the obtained copolymers were investigated by dynamic light scattering (DLS). The DLS data showed that about 16 nm polymer particles comprising of hydrophobic poly(tert‐butylamino)ethyl methacrylate (PtBAEMA) and poly(diethylaminoethyl methacrylate (PDEAEMA) core, hydrophilic PEGMA corona were formed above pH 8. With the decrease of pH from 8 to 6, a dramatic increase in the hydrodynamic radius of polymer particles from 16 nm to 130 nm was observed resulting from the protonation of the PDEAEMA segment. Moreover, in vitro drug release behaviors of the resulting polymer assemblies at different pH values were also investigated to evaluate their potential as sustained release drug carriers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42183.     

Surface‐modified silica nanoparticles for reinforcement of PMMA

Polymethyl methacrylate (PMMA) was introduced onto the surface of silica nanoparticles by particle pretreatment using silane coupling agent (γ‐methacryloxypropyl trimethoxy silane, KH570) followed by solution polymerization. The modified silica nanoparticles were characterized by Fourier‐transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM) and thermogravimetric analysis (TGA). Sedimentation tests and lipophilic degree (LD) measurements were also performed to observe the compatibility between the modified silica nanoparticles and organic solvents. Thereafter, the PMMA slices reinforced by silica‐nanoparticle were prepared by in situ bulk polymerization using modified silica nanoparticles accompanied with an initiator. The resultant polymers were characterized by UV–vis, Sclerometer, differential scanning calorimetry (DSC). The mechanical properties of the hybrid materials were measured. The results showed that the glass transition temperature, surface hardness, flexural strength as well as impact strength of the silica‐nanoparticle reinforced PMMA slices were improved. Moreover, the tensile properties of PMMA films doped with silica nanoparticles via solution blending were enhanced. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of thermo‐ and pH‐sensitive block copolymers bearing a biotin group at the poly(ethylene oxide) chain end

A poly(ethylene oxide)‐block‐poly(dimethylamino ethyl methacrylate) block copolymer (PEO‐b‐PDMAEMA) bearing an amino moiety at the PEO chain end was synthesized by a one‐pot sequential oxyanionic polymerization of ethylene oxide (EO) and dimethylamino ethyl methacrylate (DMAEMA), followed by a coupling reaction between its PEO amino and a biotin derivative. The polymers were charac terized with ¹H NMR spectroscopy and gel permeation chromatography. Activated biotin, biotin‐NHS (N‐hydroxysuccinimide), was used to synthesize biotin‐PEO‐PDMAEMA. In aqueous media, the solubility of the copolymer was temperature‐ and pH‐sensitive. The particle size of the micelle formed from functionalized block copolymers was determined by dynamic light scattering. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 3552–3558, 2006     

Water‐soluble dual responsive polythiophene‐g‐poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate) for different applications

Polythiophene (PT) based dual responsive water‐soluble graft copolymer (PT‐g‐[poly(methoxyethoxy ethyl methacrylate)‐co‐poly(N,N‐diethylamino ethyl methacrylate)]) (PT‐g‐P(MeO₂MA‐co‐DEAEMA)) (PTDE) has been synthesized by random copolymerization of methoxyethoxy ethyl methacrylate (MeO₂MA) and N,N‐diethylamino ethyl methacrylate (DEAEMA) at 30 °C on the 2,5‐poly(3‐[1‐ethyl‐2‐(2‐ bromoisobutyrate)] thiophene) (PTI) macroinitiator using the Cu based atom transfer radical polymerization technique. The PTDE graft copolymer was characterized by gel permeation chromatography and ¹H NMR techniques and it exhibits thermo‐reversible solubility in water showing a lower critical solution temperature of ca 42 °C in neutral aqueous solution. The PTDE graft copolymer contains a fluorescent PT backbone, and interestingly the system exhibits doubling of fluorescence intensity with rising temperature over the temperature range 41–45 °C at pH 7. The PTDE system therefore acts following the principle of the polymeric AND logic gate and it is also found to be effective in sensing of nitroaromatics, particularly picric acid. The influence of chain hydrophobicity on the logic operation and on the sensing of nitroaromatics is discussed. © 2014 Society of Chemical Industry     

Near‐infrared‐active and pH‐responsive fluorescent polymer‐integrated hybrid graphene oxide nanoparticles for the detection and treatment of cancer

Hybrid nanoparticles for theragnosis have great potentiality to bring desire functionalities in one integrated system. The development of bioimaging guided photothermal therapy (PTT) is pivotal in optimizing cytotoxic cancer therapy. We report near‐infrared (NIR)‐active and pH‐responsive fluorescent, catechol‐conjugated, reduced graphene oxide (rGO)‐anchored hybrid nanoparticles that can sharply increase the photothermal heat in response to NIR exposure and exhibit pH‐dependent fluorescence emission for the detection of tumor areas without causing cell toxicity. The optoelectronic absorption property of poly(3,4‐ethylenedioxythiophene) [PEDOT]:dopamine‐conjugated poly(4‐styrenesulfonate‐co‐maleic acid) [D‐PSM] and 3′,4′‐dihydroxyacetophenone/boron‐dipyrromethene [CCDP/BODIPY]‐quaternized polyethylene glycol grafted poly(dimethylaminoethyl methacrylate) (C/B‐PgP) present in this hybrid nanoparticles resulted in efficient photothermal conversion with pH‐tunable fluorescence that exerted sufficient photothermal cytotoxicity to cancer cells. The in vitro cellular uptake was measured by confocal laser scanning microscopy, allowing the therapeutic efficiency and bioimaging effects to be explored. We expect that the broad optical absorption property of PEDOT:D‐PSM with BODIPY‐conjugated polymers on rGO sheets would get tremendous attraction in this enormous rising PTT with cancer detectable biomarker. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43791.     

Grafting of titanium dioxide microspheres with a temperature‐responsive polymer via surface‐initiated atom transfer radical polymerization without the use of silane coupling agents

Titania microspheres with narrow size distribution and diameters of about 1 µm were prepared and subsequently functionalized using surface‐initiated atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide. The ATRP initiator was immobilized on the particle surface via acylation of surface hydroxyl groups with α‐bromoisobutyryl bromide. Subsequently, an established ATRP reaction system was used for the preparation of titania surface‐grafted poly(N‐isopropylacrylamide) (PNiPAAm). Characterization was performed with electron microscopies, X‐ray diffraction, infrared spectroscopy and dynamic light scattering. It was found that the particle size in aqueous dispersions changed reversibly with temperature as expected for a shell of PNiPAAm, a polymer with a lower critical solution temperature at 32 °C. This confirmed the successful preparation of functional, stimuli‐responsive TiO₂ microparticles via a straightforward controlled surface‐initiated polymerization method.     

Thermosensitive nanoparticles prepared from poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) and its blend with poly(lactide‐co‐glycolide) for efficient drug delivery system

Temperature‐responsive polymers have become increasingly attractive as carrier for the injectable drug delivery systems. In the present work, we have studied the preparation of poly(N‐isopropylacrylamide‐acrylamide‐vinilpyrrolidone) (NIPAAm‐AAm‐VP terpolymer) nanoparticulated terpolymer and its blend with poly(lactide‐co‐glycolide, PLGA; molar ratio of lactide/glycolid 1/3). Thermosensitive terpolymer, poly(NIPAAm‐AAm‐VP) was prepared by free‐radical polymerization in aqueous solution. The nanoparticles of poly(NIPAAm‐AAm‐VP) and its blend with PLGA containing naltrexone were prepared using the evaporation and w/o emulsion‐solvent evaporation methods, respectively. Nanoparticles prepared from terpolymer‐PLGA blend at low polymer concentration (5%) shows larger particle size (>300 nm) and higher drug content%. Various types of nanoparticles showed a burst release of less than 10% after 24 h . The results suggest that by regulating different variables, desired release profiles of naltrexone can be achieved using a blend of PLGA‐poly(NIPAAm‐AAm‐VP) nanoparticulate system. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

A New Thermo‐, pH‐ and CO2‐Responsive Fluorescent Four‐Arm Star Polymer with Aggregation‐Induced Emission for Long‐Term Cellular Tracing

Development of fluorescent bioprobes for long‐term cell tracking is of great importance to monitor the processes of genesis, development, invasion, and metastasis of cancerous cells. Herein, a new multistimuli‐responsive star polymer of tetraphenylethene‐graft‐tetra‐poly[N‐[2‐(diethylamino)‐ethyl]acrylamide] (TPE‐tetraPDEAEAM) with aggregation‐induced emission (AIE) effect for tracing live cells over a long period of time is synthesized by atom transfer radical polymerization using TPE derivative as initiator. TPE‐tetraPDEAEAM gives both lower critical solution temperature and fluorescence responses to the stimulus of the temperature, pH, and CO₂ by combining the thermoresponsive and pH/CO₂‐responsive moieties of the diethylamino and acrylamide groups. The AIE‐active TPE‐tetraPDEAEAM has the advantages of very low cytotoxicity, efficient cellular uptake, and strong fluorescence of polymer‐treated cells, which ensure its good performance in long‐term cell tracing. This facile tracking of HeLa cells for as long as nine passages exhibits superior performance in long‐term cell tracing as compared with some commercial cell tracing probes.