Separation Behavior of Octadecadienoic Acid Isomers and Identification of cis‐ and trans‐Isomers Using Gas Chromatography

Using a strongly polar cyanopropyl capillary column we have investigated the gas chromatography (GC) separation behaviors of 24 octadecadienoic acid methyl ester (18:2ME) isomers compared against saturated methyl stearate (18:0ME) and arachidic acid methyl ester (20:0ME), and the dependency on the GC column temperature. The 24 isomers were obtained by performing cis‐to trans‐isomerization of six regioisomers: five of the 18:2ME isomers were prepared by the partial reduction of methyl α‐linolenate and methyl γ‐linolenate C18 trienoic acids with different double bond positions, whereas the sixth isomer, 18:2ME (c5, c9), was obtained from a raw constituent fatty acid methyl ester (FAME) sample extracted from Japanese yew seeds. There are no reference standards commercially available for 18:2ME isomers, and in elucidating the elution order of these isomers this study should help the future identification of cis‐ and trans‐type of 18:2ME. We also report the identification method of cis‐ and trans‐type of FAME using equivalent chain lengths and attempt the identification of cis‐ and trans‐type of 18:2ME isomers from partially hydrogenated canola oil.     

Synthese des 5‐[(Acetylhydrazono)‐(4‐chlorphenyl)‐methyl]thiophen‐2‐yl‐esters der Trifluormethansulfonsäure

The synthesis of 5‐[(acetylhydrazono)‐(4‐chlorophenyl)‐methyl]thiophen‐2‐yl ester of the trifluoromethanesulfonic acid ( 2a ) and its N‐methyl derivative 2b was attempted. Oxidation of 2‐thiophene boronic acid to 2‐hydroxythiophene and in situ reaction there of with triflic anhydride yielded the hitherto unknown thiophene‐2‐yl ester of the trifluormethanesulfonic acid ( 6 ) which was transformed under Friedel‐Crafts conditions into 5‐(4‐chlorobenzoyl)‐thiophene‐2‐yl ester of the trifluoromethanesulfonic acid ( 3 ). Reaction of 3 with acetyl hydrazine resulted in the formation of the title compound 2a , albeit in low yield. The conversion of N′‐[(5‐bromothiophen‐2‐yl)‐(4‐chlorophenyl)‐methylen]‐N‐methylhydrazide ( 4b ) via boronic acid into 5‐[(acetylmethylhydrazono)‐(4‐chlorophenyl)‐methyl]thiophen‐2‐yl ester of the trifluoromethanesulfonic acid ( 2b ) was not successful.     

Synthesis,characterization and thermal degradation of poly[2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate]

In this work, 2‐(3‐p‐bromophenyl‐3‐methylcyclobutyl)‐2‐hydroxyethylmethacrylate (BPHEMA) [monomer] was synthesized by the addition of methacrylic acid to 1‐epoxyethyl‐3‐bromophenyl‐3‐methyl cyclobutane. The monomer and poly(BPHEMA) were characterized by FT‐IR and [¹H] and [¹³C]NMR. Average molecular weight, glass transition temperature, solubility parameter, and density of the polymer were also determined. Thermal degradation of poly[BPHEMA] was studied by thermogravimetry (TG), FT‐IR. Programmed heating was carried out at 10 °C min⁻¹ from room temperature to 500 °C. The partially degraded polymer was examined by FT‐IR spectroscopy. The degradation products were identified by using FT‐IR, [¹H] and [¹³C]NMR and GC‐MS techniques. Depolymerization is the main reaction in thermal degradation of the polymer up to about 300 °C. Percentage of the monomer in CRF (Cold Ring Fraction) was estimated at 33% in the peak area of the GC curve. Intramolecular cyclization and cyclic anhydride type structures were observed at temperatures above 300 °C. The liquid products of the degradation, formation of anhydride ring structures and mechanism of degradation are discussed. © 1999 Society of Chemical Industry     

Combined Biocatalytic and Chemical Transformations of Oleic Acid to ω‐Hydroxynonanoic Acid and α,ω‐Nonanedioic Acid

A practical chemoenzymatic method for the synthesis of 9‐hydroxynonanoic acid and 1,9‐nonanedioic acid (i.e., azelaic acid) from oleic acid [(9Z)‐octadec‐9‐enoic acid] was investigated. Biotransformation of oleic acid into 9‐(nonanoyloxy)nonanoic acid via 10‐hydroxyoctadecanoic acid and 10‐keto‐octadecanoic acid was driven by a C‐9 double bond hydratase from Stenotrophomonas maltophilia, an alcohol dehydrogenase from Micrococcus luteus, and a Baeyer–Villiger monooxygenase (BVMO) from Pseudomonas putida KT2440, which was expressed in recombinant Escherichia coli. After production of the ester (i.e., the BVMO reaction product), the compound was chemically hydrolyzed to n‐nonanoic acid and 9‐hydroxynonanoic acid because n‐nonanoic acid is toxic to E. coli. The ester was also converted into 9‐hydroxynonanoic acid and the n‐nonanoic acid methyl ester, which can be oxygenated into the 9‐hydroxynonanoic acid methyl ester by the AlkBGT from P. putida GPo1. Finally, 9‐hydroxynonanoic acid was chemically oxidized to azelaic acid with a high yield under fairly mild reaction conditions. For example, whole‐cell biotransformation at a high cell density (i.e., 10 g dry cells/L) allowed the final ester product concentration and volumetric productivity to reach 25 mM and 2.8 mM h⁻¹, respectively. The overall molar yield of azelaic acid from oleic acid was 58%, based on the biotransformation and chemical transformation conversion yields of 84% and 68%, respectively.

     

Occurrence of Hexacosapolyenoic Acids 26:7(n‐3), 26:6(n‐3), 26:6(n‐6) and 26:5(n‐3) in Deep‐Sea Brittle Stars from Near the Kuril Islands

Significant amounts of polyunsaturated fatty acids (PUFA) with a chain length of 26 carbon atoms were detected in lipids of five deep water species of Ophiuroidea besides common fatty acids with chain lengths between 14 and 24. By means of hydrogenation, GC–MS of the methyl esters, and 4,4‐dimethyloxazoline (DMOX) derivatives of these C26 acids were characterized as 5,8,11,14,17,20,23‐hexacosaheptaenoic [26:7(n‐3)]; 8,11,14,17,20,23‐hexacosahexaenoic [26:6(n‐3)]; 5,8,11,14,17,20‐ hexacosahexaenoic [26:6(n‐6)]; and 11,14,17,20,23‐hexacosapentaenoic [26:5(n‐3)]. Concentrations of these acids varied from 0.3 to 4.5 mol% of the total FA. In all the samples investigated, the main component of C26PUFA was hexacosaheptaenoic acid 26:7(n‐3). These C26PUFA are localized mainly in polar lipids. The presence of the possible biosynthesis precursors suggests that the C26PUFA are produced by the brittle stars, and are not accumulated from food sources. This finding can also explain the presence of small amounts of the 26:7(n‐3) acid detected earlier in flesh lipids of the roughscale sole Clidoderma asperrimum, which feeds on deep water brittle stars. We suggest a possible scheme of the biosynthesis of C26 PUFA.     

Synthesis and characterization of new soluble poly(ester‐imide)s containing noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit

A new diimide–diacid chloride (3) containing a noncoplanar 2,2′‐dimethyl‐4,4′‐biphenylene unit was synthesized by treating 2,2′‐dimethyl‐4,4′‐diamino‐biphenylene with trimellitic anhydride followed by refluxing with thionyl chloride. Various new poly(ester‐imide)s were prepared from 3 with different bisphenols by solution polycondensation in nitrobenzene using pyridine as hydrogen chloride quencher at 170°C. Inherent viscosities of the poly(ester‐imide)s were found to range between 0.31 and 0.35 dL g^?1. All of the poly(ester‐imide)s, except the one containing pendent adamantyl group 5e, exhibited excellent solubility in the following solvents: N,N‐dimethylformamide, tetrahydrofuran, tetrachloroethane, dimethyl sulfoxide, N,N‐dimethylacetamide, N‐methyl‐2‐pyrrolidinone, m‐cresol, o‐chlorophenol, and chloroform. The polymers showed glass‐transition temperatures between 166 and 226°C. The 10% weight loss temperatures of the poly(ester‐imide)s, measured by TGA, were found to be in the range between 415 and 456°C in nitrogen. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2486–2493, 2004     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) as studied by TG,TG–FTIR,and Py–GC/MS

The thermal degradation kinetics of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [poly(HB–HV)] under nitrogen was studied by thermogravimetry (TG). The results show that the thermal degradation temperatures (T_o, T_p, and T_f) increased with an increasing heating rate (B). Poly(HB–HV) was thermally more stable than PHB because its thermal degradation temperatures, T_o(0), T_p(0), and T_f(0)—determined by extrapolation to B = 0°C/min—increased by 13°C–15°C over those of PHB. The thermal degradation mechanism of PHB and poly(HB–HV) under nitrogen were investigated with TG–FTIR and Py–GC/MS. The results show that the degradation products of PHB are mainly propene, 2‐butenoic acid, propenyl‐2‐butenoate and butyric‐2‐butenoate; whereas, those of poly(HB–HV) are mainly propene, 2‐butenoic acid, 2‐pentenoic acid, propenyl‐2‐butenoate, propenyl‐2‐pentenoate, butyric‐2‐butenoate, pentanoic‐2‐pentenoate, and CO₂. The degradation is probably initiated from the chain scission of the ester linkage. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1530–1536, 2003     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry     

Polyamides obtained by direct polycondesation of 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl] fluoren‐9‐YL]‐2‐methyl‐phenoxy]aniline with dicarboxylic acids based on a diphenyl‐silane moiety

Polyamides (PAs) containing fluorene, oxyether, and diphenyl‐silane moieties in the repeating unit were synthesized in > 85% yield by direct polycondesation between a diamine and four dicarboxylic acids. Alternatively, one PA was synthesized from an acid dichloride. The diamine 4‐[4‐[9‐[4‐(4‐aminophenoxy)‐3‐methyl‐phenyl]fluoren‐9‐yl]‐2‐methyl‐phenoxy]aniline ( 3 ) was obtained from the corresponding dinitro compound, which was synthesized by nucleophilic aromatic halogen displacement from p‐chloronitrobenzene and 9,9‐bis (4‐hydroxy‐3‐methyl‐phenyl)fluorene ( 1 ). Monomers and polymers were characterized by FTIR and ¹H, ¹³C, and ²⁹Si‐NMR spectroscopy and the results were in agreement with the proposed structures. PAs showed inherent viscosity values between 0.14 and 0.43 dL/g, indicative of low molecular weight species, probably of oligomeric nature. The glass transition temperature (T_g) values were observed in the 188–211°C range by DSC analysis. Thermal decomposition temperature (TDT_10%) values were above 400°C due to the presence of the aromatic rings in the diamine. All PAs showed good transparency in the visible region (>88% at 400 nm) due to the incorporation of the fluorene moiety. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Organosoluble and light‐colored fluorinated polyimides based on 1,1‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]‐1‐phenylethane and various aromatic dianhydrides

To investigate the CF₃ group affecting the coloration and solubility of polyimides (PI), a novel fluorinated diamine 1,1‐bis[4‐(4‐amino‐2‐ trifluoromethylphenoxy)phenyl]‐1‐phenylethane (2) was prepared from 1,1‐ bis(4‐hydrophenyl)‐1‐phenylethan and 2‐chloro‐5‐nitrobenzotrifluoride. A series of light‐colored and soluble PI 5 were synthesized from 2 and various aromatic dianhydrides 3a–f using a standard two‐stage process with thermal 5a– f(H) and chemical 5a–f(C) imidization of poly(amic acid). The 5 series had inherent viscosities ranging from 0.55 to 0.98 dL/g. Most of 5a–f(H) were soluble in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone (NMP), N,N‐ dimethylacetamide (DMAc), and N,N‐dimethylformamide (DMF), and even soluble in less polar solvents, such as m‐Cresol, Py, Dioxane, THF, and CH₂Cl₂, and the 5(C) series was soluble in all solvents. The GPC data of the 5a–f(C) indicated that the Mn and Mw values were in the range of 5.5–8.7 × 10⁴ and 8.5–10.6 × 10⁴, respectively, and the polydispersity index (PDI) Mw /Mn values were 1.2–1.5. The PI 5 series had excellent mechanical properties. The glass transition temperatures of the 5 series were in the range of 232–276°C, and the 10% weight loss temperatures were at 505–548 °C in nitrogen and 508–532 °C in air, respectively. They left more than 56% char yield at 800°C in nitrogen. These films had cutoff wavelengths between 356.5–411.5 nm, the b* values ranged from 5.0–71.1, the dielectric constants, were 3.11–3.43 (1MHz) and the moisture absorptions were in the range of 011–0.40%. Comparing 5 containing the analogous PI 6 series based on 1,1‐bis[4‐(4‐aminophenoxy)phenyl]‐1‐ phenylethane (BAPPE), the 5 series with the CF₃ group showed lower color intensity, dielectric constants, and better solubility. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2399–2412, 2005     

Application of Silver Ion High-Performance Liquid Chromatography for Quantitative Analysis of Selected n-3 and n-6 PUFA in Oil Supplements

The aim of this study was to develop a simple method for simultaneous determination of selected cis/cis PUFA–LNA (18:2), ALA (18:3), GLA (18:3), EPA (20:5), and DHA (22:6) by silver ion high‐performance liquid chromatography coupled to a diode array detector (Ag‐HPLC‐DAD). The separation was performed on three Luna SCX Silver Loaded columns connected in series maintained at 10 °C with isocratic elution by 1 % acetonitrile in n‐hexane. The applied chromatographic system allowed a baseline separation of standard mixture of n‐3 and n‐6 fatty acid methyl esters containing LNA, DHA, and EPA and partial separation of ALA and GLA positional isomers. The method was validated by means of linearity, precision, stability, and recovery. Limits of detection (LOD) for considered PUFA standard solutions ranged from 0.27 to 0.43 mg L^?1. The developed method was used to evaluate of n‐3 and n‐6 fatty acids contents in plant and fish softgel oil capsules, results were compared with reference GC‐FID based method.     

O4‐Alkylated‐2‐Deoxyuridine Repair by O6‐Alkylguanine DNA Alkyltransferase is Augmented by a C5‐Fluorine Modification

Oligonucleotides containing various adducts, including ethyl, benzyl, 4‐hydroxybutyl and 7‐hydroxyheptyl groups, at the O⁴ atom of 5‐fluoro‐O⁴‐alkyl‐2′‐deoxyuridine were prepared by solid‐phase synthesis. UV thermal denaturation studies demonstrated that these modifications destabilised the duplex by approximately 10 °C, relative to the control containing 5‐fluoro‐2′‐deoxyuridine. Circular dichroism spectroscopy revealed that these modified duplexes all adopted a B‐form DNA structure. O⁶‐Alkylguanine DNA alkyltransferase (AGT) from humans (hAGT) was most efficient at repair of the 5‐fluoro‐O⁴‐benzyl‐2′‐deoxyuridine adduct, whereas the thymidine analogue was refractory to repair. The Escherichia coli AGT variant (OGT) was also efficient at removing O⁴‐ethyl and benzyl adducts of 5‐fluoro‐2‐deoxyuridine. Computational assessment of N1‐methyl analogues of the O⁴‐alkylated nucleobases revealed that the C5‐fluorine modification had an influence on reducing the electron density of the O⁴?C_α bond, relative to thymine (C5‐methyl) and uracil (C5‐hydrogen). These results reveal the positive influence of the C5‐fluorine atom on the repair of larger O⁴‐alkyl adducts to expand knowledge of the range of substrates able to be repaired by AGT.     

Study of conformational changes in poly(3‐dodecylthiophene) dependent on backbone stereoregularity using a spin‐probe technique

Poly(3‐dodecylthiophene) (P3DDT), with different amounts of head‐to‐head configuration defects, was characterized by ultraviolet–visible, ¹H‐NMR, photoluminescence, and Raman spectra. The heat‐induced conformational sample changes were studied by electron paramagnetic resonance (EPR). For the study of these changes, a spin‐probe technique was used, in which 5‐doxyl‐stearic acid methyl ester was applied as a spin probe. From the EPR spin‐probe spectra, rotational correlation times and order parameters were calculated. The heat‐induced conformational changes of P3DDT were accompanied by a monotonic decrease in the rotational correlation time up to approximately ?33°C (240 K) and then by an increase in the range of the glass‐transition temperatures, with the maximum being near room temperature and depending on the effective conjugation length. Afterward, the rotational correlation times had a decreasing tendency up to 90°C (363 K). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2215–2223, 2003     

O6‐Alkylguanine‐DNA Alkyltransferase‐Mediated Repair of O4‐Alkylated 2′‐Deoxyuridines

O⁶‐Alkylguanine‐DNA alkyltransferases (AGTs) are responsible for the removal of O⁶‐alkyl 2′‐deoxyguanosine (dG) and O⁴‐alkyl thymidine (dT) adducts from the genome. Unlike the E. coli OGT (O⁶‐alkylguanine‐DNA‐alkyltransferase) protein, which can repair a range of O⁴‐alkyl dT lesions, human AGT (hAGT) only removes methyl groups poorly. To uncover the influence of the C5 methyl group of dT on AGT repair, oligonucleotides containing O⁴‐alkyl 2′‐deoxyuridines (dU) were prepared. The ability of E. coli AGTs (Ada‐C and OGT), human AGT, and an OGT/hAGT chimera to remove O⁴‐methyl and larger adducts (4‐hydroxybutyl and 7‐hydroxyheptyl) from dU were examined and compared to those relating to the corresponding dT species. The absence of the C5 methyl group resulted in an increase in repair observed for the O⁴‐methyl adducts by hAGT and the chimera. The chimera was proficient at repairing larger adducts at the O⁴ atom of dU. There was no observed correlation between the binding affinities of the AGT homologues to adduct‐containing oligonucleotides and the amounts of repair measured.     

Turn‐on chemosensors for silver ions based on oligomers with diaza‐16‐crown 6‐ether receptors and aromatic fluorophore end groups

The reaction of N‐(2,4‐dinitrophenyl)pyridinium chloride ( 1 ), diaza‐18‐crown 6‐ether (DA18C6) and 2,5‐bis(aminophenyl)‐1,3,4‐oxadiazole ( 2 ) caused the opening of the pyridinium ring and yielded an ionic oligomer (oligomer‐1) comprising a 5‐DA18C6‐penta‐2,4‐dienylideneammonium chloride main chain and 2‐(4‐aminophenyl)‐5‐phenyl‐1,3,4‐oxadiazole or 2‐(4‐N‐phenylpyridinium)‐5‐phenyl‐1,3,4‐oxadiazole end groups. Accordingly, the reaction of 1 , DA18C6 and 2,7‐diaminofluorene ( 3 ) yielded oligomer‐2. The structures of oligomer‐1 and oligomer‐2 were determined by comparing their ¹H NMR spectra with those of model compounds, which were synthesized by the 1:1 reaction of 1 with 2 or 3 . Oligomer‐1 and oligomer‐2 exhibited weak bluish‐green photoluminescence (PL) before the inclusion of Ag⁺ in the DA18C6 receptor, after which they exhibited strong bluish‐green PL. These observations can be explained by the occurrence of photoinduced electron transfer in the oligomers. Copyright © 2011 Society of Chemical Industry     

Direct synthesis of poly(4′‐oxy‐4‐biphenylcarbonyl) and poly(2‐oxy‐6‐naphthoyl) under nonstoichiometric conditions

Direct synthesis of poly(4′‐oxy‐4‐biphenylcarbonyl) (POBP) and poly(2‐oxy‐6‐naphthoyl) (PON) was examined by polycondensation of 4′‐hydroxy‐4‐biphenylcarboxylic acid (HBPA) and 2‐hydroxy‐6‐naphthoic acid (HNA) in the presence of 4‐ethoxybenzoic anhydride or 2‐naphthoic anhydride as condensation reagents. Polymerizations were carried out at 320 °C in aromatic solvents and liquid paraffin. POBP, having a number‐average degree of polymerization (DPn) of 38, was obtained as plate‐like crystals at the molar ratio of HBPA and anhydride of 50 mol%. PON was also obtained as plate‐like crystals but the DPn was only 13. HBPA and HNA were first converted to reactive acyloxyaromatic acid intermediates. Then the DPn was increased by means of reaction‐induced crystallization of oligomers and subsequent solid‐state polymerization via an acid–ester exchange under nonstoichiometric conditions caused by the monocarboxylic acid by‐product. Even though the DPn of PON was not as high, direct polycondensation of HBPA and HNA proceeded successfully with aromatic anhydrides. Copyright © 2004 Society of Chemical Industry     

Characterization of poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) prepared from natural rubber through 2D NMR spectroscopy

Poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) was prepared by epoxidation of deproteinized natural rubber with m‐chloroperbenzoic acid followed by hydrolysis with sulfuric acid. Characterization of the resulting product was performed through FT‐IR, ¹H NMR, and ¹³C NMR spectroscopies. All signals appearing in the ¹H and ¹³C NMR spectra were assigned by distortionless enhancement by polarization transfer (DEPT), quaternary carbon observation (QUAT), correlation spectroscopy (COSY), and heteronuclear multiple quantum correlation (HMQC) measurements. After proving the primary structure of the product, one pot synthesis of poly(1‐methyl‐1,4‐butanediol‐1,4‐diyl/2,3,4‐trihydro‐5‐methylfuran‐2,5‐diyl) from deproteinized natural rubber latex was carried out with peracetic acid and 2‐propanol. The resulting product was characterized by ¹H NMR spectroscopy on the basis of the assignments established in this study, and its gas permeability was measured for a practical application as a film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011.     

Improved conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐ones into 6‐exo‐acetoxy and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐ones

The reaction conditions for the conversion of 6‐endo‐tosyloxybicyclo[2.2.2]octan‐2‐one ( 7b ) into 6‐exo‐acetoxy ( 8b ) and 6‐exo‐benzoyloxybicyclo[2.2.2]octan‐2‐one ( 8a ), respectively, were improved. Thus known 6‐endo‐tosyloxy‐bicyclo[2.2.2]octan‐2‐ones (+)‐(1RS,6SR,8SR,11RS)‐11‐[(4‐toluenesulfonyl)oxy]tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 1a ), 13‐methyl‐15‐oxo‐9β,13b‐ethano‐9β‐podocarpan‐12β‐yl‐4‐toluenesulfonate ( 3a ), and methyl (13R)‐16‐oxo‐13‐[(4‐tolylsulfonyl)oxy]‐17‐noratisan‐18‐oate ( 5 ), were converted,in comparable yields, as previously recorded, but much shorter times, into (+)‐(1RS,6SR,8SR,11SR)‐11‐(benzoyloxy) tricyclo[6.2.2.0^1,6]dodecan‐9‐one ( 2 ), 13‐methyl‐15‐oxo‐9β,13β‐ethano‐9β‐podocarpan‐12α‐yl benzoate ( 4 ), and methyl (13S)‐13‐(benzoyloxy)‐16‐oxo‐17‐noratisan‐18‐oate ( 6 ), respectively.     

New low bandgap conjugated polymer derived from 2, 7‐carbazole and 5, 6‐bis(octyloxy)‐4, 7‐di(thiophen‐2‐yl) benzothiadiazole: Synthesis and photovoltaic properties

To develop conjugated polymers with low bandgap, deep HOMO level, and good solubility, a new conjugated alternating copolymer PC‐DODTBT based on N‐9′‐heptadecanyl‐2,7‐carbazole and 5, 6‐bis(octyloxy)‐4,7‐di(thiophen‐2‐yl)benzothiadiazole was synthesized by Suzuki cross‐coupling polymerization reaction. The polymer reveals excellent solubility and thermal stability with the decomposition temperature (5% weight loss) of 327°C. The HOMO level of PC‐DODTBT is ‐5.11 eV, indicating that the polymer has relatively deep HOMO level. The hole mobility of PC‐DODTBT as deduced from SCLC method was found to be 2.03 × 10^?4 cm²/Versus Polymer solar cells (PSCs) based on the blends of PC‐DODTBT and [6,6]‐phenyl‐C₇₁‐butyric acid methyl ester (PC₇₁BM) with a weight ratio of 1:2.5 were fabricated. Under AM 1.5 (AM, air mass), 100 mW/cm^?2 illumination, the devices were found to exhibit an open‐circuit voltage (V_oc) of 0.73 V, short‐circuit current density (J_sc) of 5.63 mA/cm^?2, and a power conversion efficiency (PCE) of 1.44%. This photovoltaic performance indicates that the copolymer is promising for polymer solar cells applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Phosphorus‐containing poly(ester‐imide)–polydimethylsiloxane copolymers

New phosphorus‐containing poly(ester‐imide)‐polydimethylsiloxane copolymers were prepared by solution polycondensation of 1,4‐[2‐(6‐oxido‐6H‐dibenz < c,e > < 1, 2 > oxaphosphorin‐6‐yl)]naphthalene‐bis(trimellitate) dianhydride with a mixture of an aromatic diamine (1,3‐bis(4‐aminophenoxy)benzene) and α,ω‐bis(3‐aminopropyl)oligodimethylsiloxane of controlled molecular weight, in various ratios. Poly(amic acid) intermediates were converted quantitatively to the corresponding polyimide structures using a solution imidization procedure. The polymers are easily soluble in polar organic solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylformamide, as well as in less polar solvents such as tetrahydrofuran. They show good thermal stability, the decomposition temperature being above 370 °C. The glass transition temperatures are in the range 165–216 °C. Solutions of the polymers in N‐methyl‐2‐pyrrolidone exhibit photoluminescence in the blue region. Copyright © 2010 Society of Chemical Industry