Backscattered electron imaging of the undersurface of resin-embedded cells by field-emission scanning electron microscopy

In this study backscattered electron (BSE) imaging was used to display cellular structures stained with heavy metals within an unstained resin by atomic number contrast in successively deeper layers. Balb/c 3T3 fibroblasts were cultured on either 13-mm discs of plastic Thermanox, commercially pure titanium or steel. The cells were fixed, stained and embedded in resin and the disc removed. The resin block containing the cells was sputter coated and examined in a field-emission scanning electron microscope. The technique allowed for the direct visualization of the cell undersurface and immediately overlying areas of cytoplasm through the surrounding embedding resin, with good resolution and contrast to a significant depth of about 2 μm, without the requirement for cutting sections. The fixation protocol was optimized in order to increase heavy metal staining for maximal backscattered electron production. The operation of the microscope was optimized to maximize the number of backscattered electrons produced and to minimize the spot size. BSE images were collected over a wide range of accelerating voltages (keV), from low values to high values to give ‘sections' of information from increasing depths within the sample. At 3–4 keV only structures a very short distance into the material were observed, essentially the areas of cell attachment to the removed substrate. At higher accelerating voltages information on cell morphology, including in particular stress fibres and cell nuclei, where heavy metals were intensely bound became more evident. The technique allowed stepwise ‘sectional’ information to be acquired. The technique should be useful for studies on cell morphology, cycle and adhesion with greater resolution than can be obtained with any light-microscope-based system.     

The role of substrates on the structural,optical, and morphological properties of zno nanotubes prepared by spray pyrolysis

ZnO films were deposited onto glass, ITO coated glass, and sapphire substrate by spray pyrolysis, and subsequently annealed at the same temperature of 400°C for 3 h. The role of substrate on the properties of ZnO films was investigated. The structural and optical properties of the films were investigated by X‐ray diffractometer (XRD) and photoluminescence (PL) spectrophotometer, respectively. The surface morphology of the nanostructured ZnO film was investigated by scanning electron microscopy (SEM) and atomic force microscopy (AFM). Crystallographic properties revealed that the ZnO films deposited on sapphire and ITO substrates exhibit a strong c‐axis orientation of grains with hexagonal wurtzite structure. Extremely high UV emission intensity was determined in the film on ITO. The different luminescence behaviors was discussed, which would be caused by least value of strain in the film. Films grown on different substrates revealed differences in the morphology. ZnO films on ITO and sapphire substrates revealed better morphology than that of the film on glass. AFM images of the films prepared on ITO show uniform distribution of grains with large surface roughness, suitable for application in dye sensitized solar cells. Microsc. Res. Tech. 77:211–215, 2014. © 2013 Wiley Periodicals, Inc.     

Histological and ultrastructural features of the rectum in Poecilimon cervus Karabağ, 1950 (Orthoptera: Tettigoniidae)

The morphology and ultrastructure of the rectum in Poecilimon cervus Karaba?, 1950 (Orthoptera, Tettigoniidae) were analyzed by light microscope, scanning (SEM) and transmission electron microscopes (TEM). The rectum is the final part of the digestive tract that plays an important role in water reabsorption in insects and so provides osmoregulation. In the transverse sections, six rectal pads and columnar epithelium can be distinguished. The cuticular intima lines the lumen at the apical side of the epithelium. In the cytoplasm, there are numerous mitochondria, some endocytic vesicles, secreting vesicles whose sizes differ according to the area in the cell, and a nucleus with globular in shape. With this study, we aimed to demonstrate the ultrastructure of the rectum of P. cervus and differences or similarities of with other species.     

Reflection electron imaging and spectroscopy studies of aluminium metal reduction at α-aluminium oxide (0,1,2) surfaces

Cleaved α-aluminium oxide (0,1,2) surfaces are studied using combined techniques of scanning reflection electron microscopy and reflection electron energy-loss spectroscopy. An α-aluminium oxide (0,1,2) surface can terminate with a layer of either oxygen or Al atoms depending on where the bonds break. Aluminium metal can be reduced only from the domains initially terminated with oxygen by an intensive electron beam. The interpretation of this damage effect is based on the desorption process of oxygen atoms after Auger decay. The resistance to beam damage of the domains initially terminated with Al is found to be due to the protection of the surface adsorbed amorphous oxygen layer.     

A new method using Scanning Electron Microscopy (SEM) for preparation of anisopterous odonates

Anisopterous odonate male's secondary genitalia is a complex of several structures, among them the vesica spermalis is the most informative with important specific characters. The observation of those characters, mostly of membranous nature, is difficult in the Scanning Electron Microscope due to dehydration and metallization processes. In this contribution, we discuss a new and low cost procedure for the observation of these characters in the SEM, compatible with the most common agents used for preserving specimens.     

Morphological characterization of Hypnaceae (Bryopsida,Hypnales): Investigating four genera from Western Himalayas by using LM and SEM techniques

The Hypnaceae is one of the largest and diversified family among the pleurocarpous mosses which consists of nearly 60 genera and 1,000 species around the world. In Pakistan, it is represented by 15 species and 8 genera. The current research article provides the detail morphological investigation of four different species (genera) of the family Hypnaceae that is, Gollania clarescens, Hypnum revolutum, Homomallium andoi, and Taxiphyllum taxirameum in the Western Himalayas, Pakistan. The research article reports the first SEM study of the leaf surfaces of the studied taxa, along with comprehensive morphological characters of the four species. The main objective of the research project is to present the comparative light and scanning electron microscopic study to discuss the morphology in detail because previously the family is just reported in different bryophyte checklists of the Western Himalayas. Based on results, morphological characters, micromorphological observations, qualitative and quantitative attributes, taxonomic keys for the studied taxa, distribution, and habitat are described. Stereoscope was used to analyze different qualitative characters, and light microscope was used to observe and measure the laminal and alar cells of the leaf. The SEM study reveals many important surface features like cell shape and cell wall. The laminal cells were mostly linear and elongated with thin cell walls. The specimens used for the SEM were air dried, so the laminal cells were somewhat constricted and concaved. The current study project will help to make the contribution in the taxonomy and morphology of this family.     

Microstructure of Monoplacophora (Mollusca) shell examined by low-voltage field emission scanning electron and atomic force microscopy

The shell of Micropilina arntzi (Mollusca: Monoplacophora), a primitive molluscan class, was examined by using field emission scanning electron microscopy (FESEM) at low voltage and atomic force microscopy (AFM). The use of these two techniques allowed the observation of fine details of Micropilina arntzi shell and contributed to bring new features concerning the study of molluscan shell microtexture. Imaging with low-voltage FESEM provided well-defined edge contours of shell structures, while analyzing the sample with AFM gave information about the step height of stacked internal structures as well as the dimension of the particles present in their surface at a nanometric level. The shell microstructure of Monoplacophora species presents different patterns and may be a taxonomic implication in the systematic studies of the group.     

CASINO: A new monte carlo code in C language for electron beam interaction —part I: Description of the program

This paper is a guide to the ANSI standard C code of CASINO program which is a single scattering Monte CArlo SImulation of electroN trajectory in sOlid specially designed for low-beam interaction in a bulk and thin foil. CASINO can be used either on a DOS-based PC or on a UNIX-based workstation. This program uses tabulated Mott elastic cross sections and experimentally determined stopping powers. Function pointers are used for the most essential routine so that different physical models can easily be implemented. CASINO can be used to generate all of the recorded signals (x-rays, secondary, and backscattered) in a scanning electron microscope either as a point analysis, as a linescan, or as an image format, for all the accelerated voltages (0.1–30 kV). As an example of application, it was found that a 20 nm Guinier-Preston Mg₂Si in a light aluminum matrix can, theoretically, be imaged with a microchannel backscattered detector at 5 keV with a beam spot size of 5 nm.     

Effects of TGF‐β1 on mineralization mediated by rat calvaria‐derived osteogenic cells

In this study, we have analyzed the viability and cell growth, as well as, the mineralization of extracellular matrix (ECM) by alizarin red and von Kossa staining of calvaria‐derived osteogenic cultures, treated with TGF‐β1 alone or associated with Dex comparing with acid ascorbic (AA) + β‐glicerophosphate (βGP) (positive mineralization control). The expression of the noncollagenous proteins bone sialoprotein (BSP), osteopontin (OPN) and fibronectin (FN) were evaluated by indirect immunofluorescence. In addition, the main ultrastructural morphological findings were assessed by transmission electron microscopy. Osteogenic cells were isolated of calvaria bone from newborn (2‐day‐old) Wistar rats were treated with TGF‐β1 alone or with dexamethasone for 7, 10, and 14 days. As positive mineralization control, the cells were supplemented only with AA+ βGP. As negative control, the cells were cultured with basal medium (α‐MEM + 10%FBS + 1%gentamicin). The treatment with TGF‐β1, even when combined with Dex, decreased the viability and cell growth when compared with the positive control. Osteoblastic cell cultures were positive to alizarin red and von Kossa stainings after AA + βGP and Dex alone treatments. Positive immunoreaction was found for BSP, OPN and FN in all studied treatments. Otherwise, when the cell cultures were supplemented with TGF‐β1 and TGF‐β1 + Dex, no mineralization was observed in any of the studied periods. These present findings suggest that TGF‐β1, in the studied in vitro doses, inhibits the proliferation and differentiation of osteoblastic cells by impairment of nodule formation.     

The observation of large magnetite (Fe3O4) crystals from magnetotactic bacteria by electron and atomic force microscopy

Magnetite crystals inside coccoid magnetotactic bacteria found in lagoons near Rio de Janeiro city were examined by electron microscopy (EM) and atomic force microscopy (AFM). For AFM, ultrathin sections of bacteria embedded in Epon resin were etched with an ethanolic NaOH solution and observed both in the height and in the force modes. Comparative electron microscope images were useful for identifying crystalline reliefs in the etched sections. Different situations representing particular arrangements of crystal chains were observed by AFM. The majority of the bacteria examined presented unusually large magnetite crystals which remained strongly attached in linear chains even after the laboratory procedures for their isolation. This behaviour is different from all other biogenic magnetite crystals isolated so far. It is suggested that this attachment is due to the strong field between individual crystals as well as to the contact areas, which are the largest observed until now. The correct identification of a particular topography by AFM as a crystal relief may be critical when crystals are not aligned in chains; in these cases the linear dimensions and the presence of well-defined edges and faces are important features to be taken into account. Characterization of the crystal faces is important for the study of magnetotactic micro-organisms since the crystalline habits seem to be species-specific. Observation of etched sections proved to be a helpful approach for crystal relief observation, especially when small amounts of bacteria were available.     

Scanning tunnelling microscopy of B/Si(111) √3×√3 R(30°)

The √3 superstructure induced by boron outdiffusion at the surface of highly p doped Si(111) samples is studied by means of Auger, LEED and STM. Simultaneous double imaging at different voltages allows us to probe both filled and empty electronic states. A modification of the T₄ structural model of (Al, In, Ga)/Si(111) √3 is proposed for the B/Si(111) √3 superstructure.     

Evaluation of cyanoacrylate glues for making attached living-leaves epidermis replicas and its scanning electron microscopy observations (evaluación de pegamentos de cianoacrilato para hacer réplicas epidérmicas en hojas vivas adheridas y su observación al MEB)

Six brands of cyanoacrylate glue were tested to make inverse replicas of a leaf's epidermis. All of them gave satisfactory results for observations up to 8000x with a Philips XL-20 scanning electron microscope (SEM), working at 10 kV. Genus of plants used were Xanthosoma sp., Psidium sp., Melicocca sp., Sorghum sp., and Stenotaphrum sp. The main limitations were that the epicuticular wax gets embedded within the glue. Spindle- or oval-shaped artifacts are produced by stomatal apertures. This paper confirms previous findings related to the fact that cyanoacrylate glues are an alternative method for making fast, inexpensive, and sturdy epidermis replicas for scanning electron microscopy observation.     

The morphological and biomechanical changes of keratocytes cultured on modified p (HEMA‐MMA) hydrogel studied by AFM

The poor integration with host cornea tissue and the low mechanical properties of pHEMA hydrogel for artificial cornea remains a difficult problem to solve. A modified pHEMA hydrogel, MMA copolymerized and type‐I collagen and bFGF immobilized, was previously prepared in an attempt to solve the problems. In this study, the cytotoxicity of Col/bFGF‐p (HEMA‐MMA) and p (HEMA‐MMA) was studied by cell adhesion assay and atomic force microscopy (AFM). The results of cell adhesion assay show that the attachment of keratocytes on the modified membrane is much higher than that of the unmodified membrane. This indicates that the material after modification have better cell–material interaction. The AFM images reveal that the morphology of keratocytes cultured on different substrate is obviously different. The cell cultured on modified membrane presented a completely elongated and spindle‐shape morphology. The force?distance indicates that the biomechanical of keratocytes changes significantly after culturing on different substrates. The adhesion force (2328±523 pN) and Young's modulus (0.51±0.125 kPa) of the cell cultured on modified membrane are much higher, and the stiffness (0.08±0.022 mN/m) is lower than those of the cell cultured on unmodified membrane. These results show that the cytotoxicity of Col/bFGF‐p (HEMA‐MMA) for keratocytes is much improved. SCANNING 31: 246–252, 2009. © 2010 Wiley Periodicals, Inc.     

About the role of the various types of secondary electrons (SE1; SE2; SE3) on the performance of LVSEM

The relative weight, δ_Β, of the yield of secondary electrons, SE₂, induced by the backscattered electrons, BSE, with respect to that, δ_P, of secondary electrons, SE₁, induced by the primary electrons, PE, is deduced from simple theoretical considerations. At primary energies E₀ larger than E_M (where the total SE yield δ = δ_P + δ_B is maximum), the dominant role of the backscattering events is established. It is illustrated in SEM by a direct comparison of the contrast between SE images and BSE images obtained at E₀ ～ 5 keV and E₀ ～ 15 keV on a stratified specimen. At energies E₀ less than E_M, the dominant role of SE₁ electrons with respect to SE₂ (and SE₃) is established. It is illustrated by the better practical resolution of diamond images obtained with an in‐lens detection in low voltage SEM E₀ ～ 0.2–1 keV range compared with that obtained with a lateral detector. The present contribution illustrates the improved performance of LVSEM in terms of contrast and of practical resolution as well as the importance of variable voltage methods for subsurface imaging. The common opinion that the practical lateral resolution is given by the incident spot diameter is also reconsidered in LVSEM.     

Observation of lattice fringes of the Si(111)–7×7 structure by reflection electron microscopy*

Lattice fringes of Si(111)–7×7 reconstructed surface structure in reflection electron microscopy (REM) are observed for the first time, and their characteristic features are presented. Due to a glancing reflection condition in REM, the fringes with a spacing of 2.3 nm of the 7×7 surface structure lattice are seen in a region of a certain defocus range (about 6–8 μm) in a foreshortened image. The glancing reflection geometry also results in a complicated dependence of fringe directions on imaging conditions (beam alignment, crystal orientation). A shift of the fringes across the surface atomic steps and out of phase boundaries is observed.     

Nanoscale Fabrication of the Ferroelectric Polymer Poly(vinylidene Fluoride with Trifluoroethylene) P(VDF‐TrFE) 75:25 Thin Films by Atomic Force Microscope Nanolithography

Thin films of an organic ferroelectric system, poly(vinylidene fluoride with trifluoroethylene) P(VDF‐TrFE, Kureha Corporation, Tokyo, Japan) 75:25 layers, have been deposited on highly ordered pyrolytic graphite and silicon dioxide by the horizontal Schaefer method of Langmuir–Blodgett techniques. It is possible to “shave” or mechanically displace small regions of the polymer film by using atomic force microscope nanolithography techniques such as nanoshaving, leaving swaths of the surface cut to a depth of 4 nm and 12 nm exposing the substrate. The results of fabricating stripes by nanoshaving two holes close to each other show a limit to the material “stripe” widths of an average of 153.29 nm and 177.67 nm that can be produced. Due to the lack of adhesion between the substrates and the polymer P(VDF‐TrFE) film, smaller “stripes” of P(VDF‐TrFE) cannot be produced, and it can be shown by the sequencing of nanoshaved regions that “stripes” of thin films can be removed. SCANNING 34: 404‐409, 2012. © 2012 Wiley Periodicals, Inc.     

The effect of vacancies on the annular dark field image contrast of grain boundaries: a SrTiO(3) case study

The analysis of grain boundary structure in high resolution electron microscopy is often hindered by contrast variation within the grain boundary region which is not explained by simple models of the grain boundary structure. Recent work suggests that structural disorder along the beam direction and the presence of vacancies contribute significantly to this effect. One might expect a significant reduction in contrast in a Z-contrast image of a grain boundary would imply that vacancies present must result from the absence of heavier elements. Using a [001](210) Σ5 grain boundary in SrTiO₃ as a test case and first principles structure relaxation to calculate stable defect structures, we show that the reduction in the intensity from fully occupied Sr columns due to the structural distortion resulting from a nearby O vacancy can be as great as that due to introducing a Sr vacancy in the column itself. The effect on energy dispersive X-ray spectroscopy signals is also considered, but found to be smaller than that on Z-contrast images.