A facile galvanostatic method for the synthesis of quinoxalinediones

Electrochemical oxidation of catechols (1a-d) has been studied in the presence of N,N-dimethylethylendiamine (3) as a nucleophile in aqueous solutions, using cyclic voltammetry, constant-current coulometry and controlled-potential coulometry. The results indicate that the quinones derived from catechols (2a-d) participate in Michael addition reactions with N,N′-dimethylethylendiamine (3) via the ECECE mechanism to form the corresponding quinoxalinedione derivatives (6a-c).     

Synthesis and photovoltaic properties of low-bandgap polymers based on N-arylcarbazole

Low-bandgap poly(2,7-carbazole) derivatives with variable N-substituent of ethyl (PEtCzBT), phenyl (PPhCzBT) and 4-diphenylaminophenyl (PTPACzBT) on the carbazoles, were synthesized through Suzuki coupling reaction. The polymers show excellent solubility in organic solvents (readily soluble in chloroform, THF and toluene etc.), good thermal stability (5% weight loss temperature of more than 417 °C), and electrochemical properties (reversible redox process with narrow bandgap), and deep HOMO energy levels (∼5.1 eV), allowing them promising candidates in the solar cell fabrication. Bulk-heterojunction solar cells with these polymers as electron donor and (6,6)-phenyl-C₇₁-butyric acid methyl ester (PC₇₁BM) as electron acceptor exhibit high V_oc (0.91-0.95 V) and good power conversion efficiency (PCE) of 1.69% for PEtCzTB, 2.01% for PPhCzTB, and 2.42% for PTPACzTB.     

Synthesis and application of polymer-supported N-sulfonylated aminoalcohols as enantioselective catalysts

Two novel cross-linked polystyrene-supported N-sulfonylated β-aminoalcohol resins 13 and 14 have been prepared from radical co-polymerizations of styrene, divinylbenzene, and styrenes bearing a para-substituent of N-sulfonylated aminoalcohol. Resins 13 and 14 were obtained in high yields of 85.8 and 84.7%, and were characterized by IR and solid state ¹³C NMR spectroscopies. Elemental analyses reveal that 1 g of resin 13 contains 0.93 mmol bidentate N-sulfonylated β-aminoalcohol. The ligand content in tridentate resin 14 is calculated to be 0.95 mmol/g. The Ti(O-i-Pr)₄/13 catalytic system works excellently in asymmetric ZnEt₂ additions to aldehydes affording secondary alcohols in ≥90% ee. Resin 13 can be reused 9 times without losing any activity, giving the product with enantioselectivities ≥87% ee. The Ti(O-i-Pr)₄/14 system was used only once in asymmetric AlEt₃ additions to a variety of aldehydes affording secondary alcohols in good to excellent enantioselectivities from 73 to 92% ee.     

Polarity reversal induced by electrochemically generated thiazol-2-ylidenes: The Stetter reaction

The inversion of the normal reactivity (umpolung) of aldehydes has been induced via N-heterocyclic carbenes (NHCs) thiazol-2-ylidenes 2a or 3a, generated by simple electrolyses of solutions containing thiazolium salt 2 or 3. Accordingly, 1,4-dicarbonyl compounds have been obtained, in mild conditions and in moderate to very high yields, via 1,4-addition of the Breslow intermediates to the suitable Michael acceptor. The procedure has been performed in classical organic solvents (VOCs) as well as in room temperature ionic liquids (RTILs). The different reactivity of aliphatic aldehydes vs the one of aromatic and heteroaromatic aldehydes has been emphasized.     

Electrochemical study of stable N-alkoxyarylaminyl radicals

The electrochemical study of N-tert-butoxy-2,4-diphenyl-6-tert-butylphenylaminyl (1a), N-tert-butoxy-2,4-bis(4-chlorophenyl)-6-tert-butylphenylaminyl (1b), N-[2-(methoxycarbonyl)-2-propyl]-2,4-diphenyl-6-tert-butylphenylaminyl (2), and N-tert-butoxy-2,4,6-tris(4-chlorophenyl)phenylaminyl radicals (3) was performed by cyclic voltammetry using acetonitrile as the solvent and Bu₄NPF₆ as the supporting electrolyte. On cathodic scan (100 mV/s), all the radicals gave chemically reversible cyclic voltammograms, and the were determined to be −1.405 V (1a), −1.310 V (2a), −1.282 V (2b), and −1.195 V (3) (versus Fc⁺/Fc), respectively. On anodic scan (100 mV/s), on the other hand, 1a, 1b and 2 showed chemically reversible cyclic voltammograms, but 3 exhibited a partially reversible couple even on a scan rate of 500 mV/s, indicating that the cation species of 3 was less stable. The determined for 1a, 1b, 2 and 3 were 0.220, 0.280, 0.318 and 0.294 V (versus Fc⁺/Fc), respectively. The electrochemical data were compared with those of thioaminyl radicals, the corresponding sulfur analogues of 1-3.     

Degradation and geometric isomerization of poly(N-propargylamides)

The stability of several poly(N-propargylamides) was investigated in solution and in solid state on the basis of molecular weight change with time, and further their thermal stability was investigated by TGA. When the stability of poly(N-propargylamides) with varying pendent groups was compared, polymers with pendent groups of moderate size showed the highest stability in solution. Too short and too bulky pendent groups were not favorable for the stability of polymers. When poly(N-propargylheptanamide) (poly(6)) was stored in THF as solution at −20 °C in the absence of oxygen in dark, its degradation rate was the lowest. The degradation rate of poly(6) depended on the solvents used, which may be related to different solubility of oxygen in these solvents. Polymers with high cis contents degraded faster than polymers with low cis contents did. Addition of TEMPO and DPPH into the poly(6)/THF solution more or less depressed the degradation of poly(6). The degradation of polymer main chain in solution was always accompanied by the decrease of cis content, i.e. geometric isomerization from cis- to trans-structure. When the polymers were stored in the solid state at −20 °C, the polymers having alkyl pendent groups with moderate length were more stable than those with bulky pendent groups. Geometric isomerization occurred along with degradation in the solid state as well.     

Preparation of polysilsesquioxane having dimethylamino group and grafted thermoresponsive polymer

The polysilsesquioxane having mercapto, dimethylamino, and phenyl groups (PAMPSQ) was prepared from the corresponding trimethoxysilanes by co-condensation under basic conditions. The mercapto group on PAMPSQ was utilized as an initiator for graft copolymerization of N-isopropylacrylamide and N,N-dimethylacrylamide. The grafting of the copolymer proceeded effectively to give the thermoresponsive polysilsesquioxane derivative (GrPSQ) without the formation of gel product. The obtained GrPSQ was amphiphilic and provided the property of thermoresponsive reversible aggregation. The aggregation temperatures of GrPSQ varied in buffer solutions showing different pH values. Furthermore, the formation of ammonium salts utilizing dimethylaminio groups with carboxylic acids or halogen compounds led to a rise in aggregation temperature.     

Tyrosine-based poly(m-phenyleneethynylene-p-phenyleneethynylene)s. Helix folding and responsiveness to a base

The Sonogashira-Hagihara polymerization of 3′,5′-diiodo-N-α-tert-butoxycarbonyl-l-tyrosine methyl ester (1) and 3′,5′-diiodo-N-α-tert-butoxycarbonyl-O-methyl-l-tyrosine methyl ester (2) with para-diethynylbenzene (3) was carried out to obtain optically active poly(m-phenyleneethynylene-p-phenyleneethynylene)s [poly(1) and poly(2)] with M_n’s ranging from 9900 to 15,000 in 80-87% yields. Poly(1) exhibited intense CD signals in DMSO and THF, but did not in CH₂Cl₂, indicating that it took a predominantly one-handed helical conformation in the former two solvents. On the other hand, there was no evidence for poly(2) to take a helical structure in these solvents. Poly(1) turned the CD sign at 390 nm from plus to minus in DMSO/H₂O = 9/1 (v/v) by the addition of NaOH. Alkaline hydrolysis of ester moieties of poly(1) and poly(2) gave the corresponding polymers having carboxy groups [poly(1a) and poly(2a)]. Poly(1a) and poly(2a) increased the CD intensity by the addition of NaOH.     

Helical conformation of the copolymers of l-proline derivatives based propargylether and chiral N-propargylamide

The novel acetylene monomers, l-proline derivatives based propargylethers PR (PA, PC, and PL) were synthesized by alkylation of Boc-hydroxyproline with propargyl bromide and acylation of achiral amine. The homopolymers of the novel acetylene monomer exist in no regulated higher order structure in solvents because of the lack of hydrogen bond and the unique ring structure in the pendant. Consequently, the copolymerization of l-proline-derived chiral propargylether PR with the l-alanine-derived N-propargylamide (LA) was formed and the chiroptical properties of the formed copolymers were examined. We conclude that (1) N-H of the amide group at 2-position in proline play an important role in the formation of helical conformation of poly(LA₈₈-co-PR₁₂); (2) improving the amount of PC of poly(LA-co-PC) changes the conformation of the copolymer in CHCl₃ and perturbs the leadership of LA; (3) the conformation of poly(LA₇₅-co-PC₂₅) remarkably changes with changing temperature and PC obtains the leadership in the competition on the conformation of poly(LA₇₅-co-PC₂₅) in CHCl₃ with the improvement of temperature.     

Hydrolytic processes and condensation reactions in the cellulose solvent system N,N-dimethylacetamide/lithium chloride. Part 2: degradation of cellulose

Certain cellulose samples, especially those of higher molecular weight, are initially insoluble in N,N-dimethylacetamide (DMAc, 1)/lithium chloride, which is a very common solvent system for cellulosic materials. According to a common protocol, heating or refluxing these samples in DMAc, or in DMAc containing dissolved LiCl, represents one of several so-called ‘activation’ procedures, which are aimed at facilitating subsequent dissolution. In the present work, it is shown that the improved solubility achieved by this method is not only caused by a better activation or improved accessibility of the pulp, but also by a progressing degradation of the cellulosic material (DP loss).The degradation of cellulose in DMAc or DMAc/LiCl is due to two separate chemical processes. The first one, involving N,N-dimethylacetoacetamide (2) which is the primary condensation product of DMAc, causes a slow degradation by thermal endwise peeling. The glucose units peeled off the reducing end are released as furan structures (3). The mechanism appears to be a thermal cleavage of the glycosidic bond, which becomes quite selective towards the proximal anhydroglucose unit by a neighbor group-assisted effect according to quantum-chemical calculations. Due to its stepwise and thus slow mechanism, this pathway contributes only insignificantly to the overall cellulose degradation.The second degradation mechanism causes random chain cleavage and thus pronounced and rather fast changes in the molecular weight distribution. It involves N,N-dimethylketeniminium ions (5), whose presence in DMAc/LiCl at temperatures above 80 °C—the coalescence temperature of DMAc as determined by dynamic NMR—was unambiguously demonstrated by specific trapping in a thermal [2+2]-cycloaddition with lipophilic olefins. The keteniminium ion is an extremely reactive electrophile, which is able to directly cleave glycosidic bonds. The detrimental effect of this intermediate on the integrity of cellulosic pulps was confirmed by addition of an external degrading agent of the keteniminium type. Also the precursor compound, a ketene aminal, was confirmed to be present in heated DMAc or DMAc/LiCl by trapping with allyl alcohol in a spontaneous Claisen-type rearrangement.     

Structural determination of stretched helix and contracted helix having yellow and red colors of poly(2-ethynylnaphthalene) prepared with a [Rh(norbornadiene)Cl]2-triethylamine catalyst

The Rh-catalyzed polymerization of 2-ethynylnaphthalene (2EN) using ethanol or toluene solvents afforded helical poly(2-ethynylnaphthalene)s (P2EN)s, i.e., yellow-colored P2EN(Y) and red-colored P2EN(R) in good yields, respectively. The diffuse reflective UV–vis (DRUV–vis) spectra of P2EN(Y) and P2EN(R) in the solid phase showed broad absorption peaks at 445 nm and 510 nm, respectively. These helical and its crystal structures were investigated using wide angle X-ray scattering (WAXS), resonance laser Raman, and molecular mechanics calculation using MMFF94 force field. Based on these analyses, we found that P2EN(Y) was composed of stretched cis-transoid helices and P2EN(R) was composed of contracted cis-cisoid helices in which form intramolecular π-stacking by ca. 3.4 Å in distance between neighboring naphthyl rings. Furthermore, the contracted helix was energetically more stable than the stretched helix. The P2EN(Y) changed to a red-colored polymer, P2EN(Y-R), by immersion in toluene. This P2EN(Y-R) completely coincides with the P2EN(R) in its crystal structure and DRUV–vis spectrum.     

Synthesis of new N, N-diphenylhydrazone dyes for solar cells: Effects of thiophene-derived π-conjugated bridge

Four novel D-π-A hydrazone dyes (HT, HM, HE, and HO) with an N, N-diphenylhydrazone moiety as the electron donor, different thiophene-derived π-conjugated bridges and a cyanoacrylic acid moiety as the electron acceptor have been designed and synthesized for the application in dye-sensitized solar cells. The influences of thiophene-derived bridges on the photoelectrochemical and photovoltaic performance of these hydrazone dyes were investigated. Results demonstrate that the introduction of 3,4-dialkyloxythiophene could red-shift the dye’s absorption spectrum due to the enhancement of the electron-donating ability of π-conjugated bridges. Importantly, electrochemical impedance spectroscopy analysis reveal that 3,4-dialkyloxythiophene bridge could change the charge recombination resistance at the TiO₂/dye/electrolyte interface and as a result to improve the open-circuit photovoltage. Among the four dyes, HO exhibits the maximum power conversion efficiency of 5.83% (V_oc = 0.65 V, J_sc = 12.69 mA/cm², FF = 0.707) under simulated AM 1.5 irradiation (100 mW/cm²).     

Synthesis, electroluminescence, and photovoltaic properties of dendronized poly(p-phenylene vinylene) derivatives

Two dendronized poly(p-phenylene vinylene) (PPV) derivatives, ED-PPV and BB-PPV, have been successfully synthesized according to the Gilch route. The obtained polymers possess excellent solubility in common solvents, good thermal stability with 5% weight loss temperature of more than 340 °C. The weight-average molecular weight (M_w) and polydispersity index (PDI) of ED-PPV and BB-PPV are in the range of (1.26-2.34)×10⁵ and 1.37-1.45, respectively. Polymer light-emitting diodes (PLEDs) with the configuration of ITO/PEDOT:PSS/polymer/Ca/Al devices were fabricated, and the PLEDs emitted green-yellow light. The turn-on voltages of the PLEDs based on ED-PPV and BB-PPV were approximately 4.3, and 4.5 V, respectively. The PLED devices of ED-PPV exhibited the maximum luminance of about 157 cd/m² at 10.5 V. Photovoltaic cells with the configuration of ITO/PEDOT:PSS/polymer:C₆₀ (1:1)/Al were also fabricated, and the energy conversion efficiency of the devices based on ED-PPV and BB-PPV was measured to be 0.58, and 0.014%, respectively, under the white light at 75 mW/cm².     

Polybinaphthyls incorporating chiral (R) or (S)-2,2′-binaphthyland oxadiazole moieties by Stille reaction

Chiral polymers P-1 and P-2 were prepared by the polymerization of (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-1) and (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-1) with 2,5-bis[(4-tributylstannyl)phenyl]-1,3,4-oxadiazole (M-2) via Pd(PPh₃)₄ catalyzed Stille coupling reaction. 1,3,4-Oxadiazole unit not only has high electron affinity, high thermal and oxidative stability, but also serves as a good chromophore. Polymers have strong blue fluorescence due to the efficient energy migration from the extended π-electronic structure of the polymers to the chiral binaphthyl core and can be expected to have potential application in the materials of fluorescent sensors. Circular dichroism (CD) spectra of polymers P-1 and P-2 are almost identical except that they gave opposite signals at each wavelength. The long wavelengths CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and a high rigidity of the polymer backbone.     

(R,R)-salen/salan-based polymer fluorescence sensors for Zn detection

(R,R)-salen-based polymer fluorescence sensor P-1 could be synthesized by the polymerization of 5,5′-(isoquinoline-5,8-diylbis(ethyne-2,1-diyl))-bis(3-tert-butyl-2-hydroxybenzaldehyde) (M-1) with (R,R)-1,2-diaminocyclohexane (M-2) via nucleophilic addition-elimination reaction, and (R,R)-salan-based polymer sensor P-2 could be obtained by the reduction reaction of P-1 with NaBH₄. The fluorescence response behaviors of two chiral polymers P-1 and P-2 on Zn²⁺ were investigated by fluorescence spectra. The fluorescence intensities of P-1 and P-2 can exhibit gradual enhancement upon addition of Zn²⁺. Compared with other cations, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Ag⁺, Cd²⁺, Cr³⁺ and Pb²⁺, Zn²⁺ can lead to the pronounced fluorescence enhancement as high as 22.8-fold for P-1 and 3.75-fold for P-2, respectively. The results show that P-1 and P-2 incorporating (R,R)-salen/salan moieties as receptors in the polymer main chain backbone can exhibit high sensitivity and selectivity for Zn²⁺ detection.     

Polybinaphthyls incorporating chiral 2,2′-binaphthyl and isoquinoline moieties by Sonogashira reaction

Polymers P-1, P-2, P-3, P-4 and P-5 were synthesized by the polymerization of 5,8-bis(ethynyl)isoquinoline (M-1) with (R)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-2), (S)-3,3′-diiodo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-2), (R)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((R)-M-3), (S)-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl ((S)-M-3), and rac-6,6′-dibromo-2,2′-bisbutoxy-1,1′-binaphthyl (M-4) under Sonogashira reaction, respectively. Both monomers and polymers were analyzed by NMR, MS, FT-IR, UV-vis spectroscopy, DSC-TGA, fluorescence spectroscopy, GPC and circular dichroism (CD) spectroscopy. CD spectra of polymers P-1 and P-2, P-3 and P-4 are almost identical except that they gave opposite signals at each wavelength. The long wavelength CD effect of P-1 and P-2 can be regarded as the more extended conjugated structure in the repeating unit and the helical backbone in the polymer chain. All five polymers have strong blue-green fluorescence due to the efficient energy migration from the extended π-electronic structure of the repeating unit of the polymers to the chiral binaphthyl core and are expected to provide understanding of structure-property relationships of the chiral conjugated polymers.     

Synthesis and gas permeability of ester substituted poly(p-phenylene)s

Polymerizations of various ester substituted 2,5-dichlorobenzoates [substituent: linear alkyl groups (1a-f), branched alkyl groups (1g-l), cyclohexyl groups (1m-o), phenyl groups (1p-r), and oxyethylene units (1s-v)] were investigated with Ni-catalyzed/Zn-mediated system in 1-methyl-2-pyrrolidone (NMP) at 80 °C. Most of monomers bearing linear and branched alkyl groups successfully polymerized to give relatively high-molecular-weight polymers (M_n = 10,000-20,800). However, the molecular weight of the polymer having eicocyl groups was low because of steric hindrance of long alkyl chain. The polymerizations of cyclohexyl 2,5-dichlorobenzoate and phenyl 2,5-dichlorobenzoate produced low-molecular-weight polymers, while the polymerizations of monomers with alkyl cyclohexyl and alkyl phenyl groups proceeded to afford polymers with relatively high-molecular-weights. The polymers possessing oxyethylene units were obtained, but the molecular weights were low when the oxyethylene chains were long. The gas permeability of membranes of poly(p-phenylene)s with alkyl chains increased as increasing the length of alkyl chain. The membranes of poly(p-phenylene)s with phenyl groups and oxyethylene units exhibited high densities and relatively low gas permeability. However, the CO₂/N₂ separation factor of membrane of poly(p-phenylene) having oxyethylene units was as large as 73.6.     

Thermal behavior of 1,4-bis(4-trimellitimido-2-trifluoromethyl phenoxy)benzene (DIDA) solvated with polar organic solvents and properties of DIDA-based poly(amide-imide)s

Fluorinated diimide-dicarboxylic acid (DIDA, Code: IV), 1,4-bis(4-trimellitimido-2-trifluoromethylphenoxy) benzene, synthesized by reacting 1,4-bis(4-amino-2-trifluoromethyl phenoxy)benzene (I) with trimellitic anhydride in polar solvents (PSv), was found to crystallize easily in amide-type solvents, such as N-methyl-2-pyrrolidinone (NMP), N, N-dimethylformamide (DMF), N, N-dimethylacetamide (DMAc), or 1,3-dimethyl-2-imidazolidinone (DMI) media, to form a series of stable crystalline solvates (III_(NMP), III_(DMAc), III_DMF), III_(DMI)) containing a certain quantity of crystalline solvent. The solvates III_(PSv) were characterized and proven by DSC, TGA, and X-ray analysis. The decomposition point temperature (T_d) was different with the type of polar solvents in III_(PSv). Elemental analysis and NMR showed that most of the III_(PSv) were formed from IV and polar solvents in the ratio of 1:2, and the solvation processes were found to be reversible. Furthermore, a series of soluble fluorinated poly(amide-imide)s (VI_a-h) were synthesized from reacting either the NMP-solvates III_(NMP) or dry/non-solvates IV with an equivalent amount of diamines by direct polycondensation using triphenyl phosphate and pyridine as condensing agents. Thermal and mechanical properties of the fluorinated VI_a-h were measured, and compared with counterparts of non-fluorinated PAI's (Code: VI′s). In comparison, the fluorinated VI_a-h poly(amide-imide)s exhibited better solubility, tensile, and thermal properties than the non-fluorinated VI′s.     

Improved electroluminescence efficiency of polyfluorenes by simultaneously incorporating dibenzothiophene-S,S-dioxide unit in main chain and oxadiazole moiety in side chain

A series of efficient and spectrally stable blue light-emitting polyfluorene derivatives containing 3,7-dibenzothiophene-S,S-dioxide (SO) unit in main chain and oxadiazole (OXD) moiety in the side chain were synthesized via Suzuki copolymerization. It was realized that the glass transition temperatures of the resulted copolymers PFSO-OXD increased gradually with the content of OXD, while the UV-vis absorption, photoluminescence spectra, as well as electrochemical properties were not significantly influenced by the molar ratio of OXD unit. Apparent solvatochromism of copolymers PFSO-OXD can be realized by varying polarity of solvents from toluene to dichloromethane. Light-emitting devices based on PFSO-OXD exhibited superior performances to those of PFSO and PF-OXD20 due to the more balanced charge carrier mobility of the devices. The electroluminescence spectra of all copolymers are independent with the current densities and thermal annealing. The best device performance was achieved based on PFSO-OXD20 with a maximal luminous efficiency of 4.9 cd A⁻¹ with the Commission Internationale de L'Eclairage (CIE) coordinates of (0.16, 0.12). The results indicated that the strategy of concurrently incorporating SO and OXD unit into the main chain and side chain of polyfluorenes, respectively has great potential to achieve efficient blue light-emitting polymers.     

Initiator efficiency in ATRP: the tosyl chloride/CuBr/PMDETA system

The low efficiency of p-toluenesulfonyl chloride (TsCl) initiator for the polymerization of methyl methacrylate (MMA), when used in conjunction with N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) and CuBr under atom transfer radical polymerization (ATRP) conditions was investigated. A major by-product in the formation of poly(methyl methacrylate) was identified as N,N-dimethyl-p-toluenesulfonamide (5) and accounted for approximately half of the initiator. Compound 5 was shown to form by the direct reaction of PMDETA and TsCl. In a model experiment equimolar amounts of TsCl, PMDETA and CuBr reacted at 80°C in p-xylene resulted in the formation of 5 and two other unsaturated sulfones 2-methyl-3-[(4-methylphenyl)sulfonyl]-2-propenoic acid methyl ester (6) and 2-[[4-methylphenyl)sulfonyl]methyl]-2-propenoic acid methyl ester (7), formed by the dehydrohalogenation and subsequent isomerization of an intermediate chloro-adduct, 1-(4-methylbenzenesulfonyl)-2-chloro-2-(methyl)methyl propionate (2). Molecular modeling predicted the unsaturated sulfone 7 was thermodynamically more stable than the higher conjugated sulfone 6 and this was confirmed by the isomerization of 6 to 7 at room temperature under mild basic conditions. The absence of 6 and 7 in the polymerization of MMA under ATRP conditions showed that in the early stages of polymerization in the presence of excess MMA, the intermediate chloro-adduct 2 is not formed.