Phase behavior, nucleation and optical properties of the binary system isotactic polypropylene/N,N′,N″-tris-isopentyl-1,3,5-benzene-tricarboxamide

The phase behavior of the binary system consisting of isotactic polypropylene (i-PP) and N,N′,N″-tris-isopentyl-1,3,5-benzene-tricarboxamide (1)—a selected member of a class of novel, versatile ‘designer’ nucleating/clarifying agents—was investigated over the entire additive concentration range by means of differential scanning calorimetry (DSC) and optical microscopy. Experimental phase diagrams were constructed from data obtained in melting and crystallization studies, and a simple monotectic is advanced, very similar to the previously studied binary system i-PP/1,3:2,4-bis(3,4-dimethylbenzylidene) sorbitol (DMDBS). In contrast to the latter, the crystallization temperature in the present system i-PP/1 was found to increase to ∼120 °C already at the lowest additive concentration employed and remained constant at further increasing additive concentration. Liquid-liquid phase separation was observed at elevated temperatures for i-PP/1 mixtures comprising more than ∼2 wt% of 1. A study on the optical properties of the i-PP/1 system revealed that the values for haze and clarity of injection-molded plaques progressively decreased and increased, respectively, in the concentration range up to 0.15 wt%. An intermediate region of fairly concentration-independent optical properties was found between 0.15 and 1 wt%, followed by a rapid increase in haze at concentrations exceeding 2 wt%.     

A novel effective way of comprising a β-nucleating agent in isotactic polypropylene (i-PP): Polymerized dispersion and polymer characterization

A kind of β-nucleating agent, namely a stearic acid and stearate lanthanum complex (NAβ), was introduced into isotactic polypropylene (i-PP) via an in situ polymerization method for the first time. A dynamic adhesion model was constructed for interpreting the β-nucleating agent dispersion process. The effects of a polymerized dispersion of the β-nucleating agent on the content of β-crystal and crystallization behavior of i-PP were investigated. The results show that the crystallization peak temperature of thus β-nucleated i-PP was greatly increased while the spherulite size dramatically decreased compared with those of net i-PP. The content of β-phase (k_β value) can reach as high as 88.7% with only 0.135 wt% of NAβ addition, which holds constant with a further increase of NAβ concentration up to 3.41 wt%. The non-isothermal crystallization kinetics of thus β-nucleated i-PP was studied with Mo equation and crystallization activation energy estimated by Kissinger method, giving unique results pertaining to the unprecedented NAβ polymerized dispersion.     

Modification of bisphenol-A based bismaleimide resin (BPA-BMI) with an allyl-terminated hyperbranched polyimide (AT-PAEKI)

As a continuation of previous work involving synthesis of an allyl-functionalized hyperbranched polyimide, AT-PAEKI, we have studied the use of this reactive polymer as a modifier of bisphenol-A based bismaleimide resin (BPA-BMI). This was pursued in anticipation of improvements in processability as well as physical properties including glass transition temperature, elastic modulus, and fracture toughness. Apparent miscibility, indicated by optical clarity with a single T_g, was observed for compositions containing up to 16 wt% AT-PAEKI. Additionally, we observed complete suppression of monomer crystallization and a slight increase in the overall cure exotherm. By rheological characterization, blends containing 4 wt% AT-PAEKI were found to feature a dramatic (65-fold) reduction in the viscosity minimum during heating. Dynamic mechanical analysis (DMA) showed that the addition of 2, 4, 8 wt%. AT-PAEKI increases the cured modulus by approximately 10% from a base value of 3.4 GPa, while adding 16 wt% AT-PAEKI decreases the modulus slightly to 3.3 GPa. DMA also revealed that the cured glass transition temperature increases monotonically with the addition of AT-PAEKI. Fracture toughness was gauged using the single edge notched beam methodology to yield the critical stress intensity factor, K_IC. Our results showed a modest toughening effect (from 0.48 to 0.55 MPa m^1/2) upon the addition of AT-PAEKI. We conclude that AT-PAEKI may serve as an effective reactive processing aid with slight improvements in T_g, modulus, and fracture toughness.     

High-pressure solution blending of poly(?-caprolactone) with poly(methyl methacrylate) in acetone + carbon dioxide

The miscibility of blends of poly(?-caprolactone) (PCL, M_w = 14,300) with poly(methyl methacrylate) (PMMA, M_w = 15K or 540K) in acetone + CO₂ mixed solvent has been explored. The liquid-liquid phase boundaries at different temperatures have been determined for mixtures containing 10 wt% total polymer blend, 50 wt% acetone and 40 wt% CO₂. The PCL and PMMA contents of the blends were varied while holding the total polymer concentration at 10 wt%. The polymer blend solutions all displayed LCST-type behavior and required higher pressures than individual polymer components for complete miscibility. Complete miscibilities were achieved at pressures within 40 MPa. The DSC scans show that the blends are microphase-separated. The blends display the melting transition of PCL and the glass transition temperature of the PMMA phases. The presence of PMMA is found to influence the crystallization and melting behavior of PCL in the blends. The DSC results on heat of melting and the FTIR spectra, specifically the changes at 1295 cm⁻¹ band show the changes (decrease) in overall crystallinity of the blend upon addition of PMMA.     

Gelation behaviors of cellulose solution dissolved in aqueous NaOH/thiourea at low temperature

Cellulose was dissolved rapidly in 9.5 wt% NaOH/4.5 wt% thiourea aqueous solution pre-cooled to −5 °C, as a result of the formation of an inclusion complex (IC) associated with cellulose, NaOH and thiourea, which could bring cellulose to the aqueous system. To clarify the rheological behaviors of the system dissolved at low temperature, this cellulose solution was investigated by dynamic viscoelastic measurement. The shear storage modulus (G′) and loss modulus (G″) as a function of the angular frequency (ω), concentration (c), temperature (T) and weight-average molecular weight (M_w) were analyzed and discussed. The results revealed that gels could form in the cellulose solution at either high temperature or low temperature, or for longer time. Interestingly, 4 wt% cellulose solution having cellulose M_w of 12.0 × 10⁴ remained at liquid state for longer time (12 days) at the temperature ranging from 0 to 5 °C. The gels already formed at elevated temperature were irreversible, i.e., after cooling to lower temperature including the temperature of cellulose dissolution (−5 °C), they could not be dissolved to become liquid. The Arrhenius analysis of the temperature dependence of viscosity in the cellulose solution indicated that a high apparent activation energy (E_a) occurred at 0 to −5 °C, suggesting the relatively stable IC structure. However, the viscosity of the cellulose solution increased slowly with an increase in the temperature at 0-40 °C, leading to the negative E_a values. The results suggested that the cellulose solution in NaOH/thiourea system is complex to differ from normal polymer systems.     

Conformation of oligo(ethylene glycol) grafted polystyrene in dilute aqueous solutions

Temperature induced conformational changes of poly(p-oligo(ethylene glycol) styrene) (POEGS) in aqueous solutions were investigated by small angle neutron scattering (SANS), neutron transmission and dynamic light scattering (DLS). The molecular weight of the polymer studied was 9400 g/mol with a polydispersity index of 1.18 and each repeat unit of the polymer had four ethylene glycol monomer segments. The polymer was water soluble due to the hydrophilicity of the OEG side chains and these solutions showed lower critical solution temperature (LCST) depending on the concentration of the polymer. Measurements of solution behavior were made as a function of temperature in the range of 25-55 °C for three polymer concentrations (0.1 wt%, 0.3 wt%, and 1.8 wt%). Neutron transmission measurements were used to monitor the amount of polymer which precipitated or remained in solution above the cloud point temperature (T_CP). DLS revealed the presence of large clusters in all solutions both below and above T_CP while SANS provided information on the structure and interactions between individual chains. It was found that in the homogeneous region below T_CP the shape of individual polymers in solution was close to ellipsoidal with the dimensions R_a = 37 Å and R_b = 14 Å and was virtually independent of temperature. The SANS data taken for the most concentrated solution studied (1.8 wt%) were fit to the ellipsoidal model with attractive interactions which were approximated by the Ornstein-Zernike function with a temperature-dependent correlation length in the range of 24-49 Å. The collapse of individual polymers to spherical globules with the radius of 15 Å above T_CP was observed.     

Network structures and dynamics of dry and swollen poly(acrylate)s. Characterization of high- and low-frequency motions as revealed by suppressed or recovered intensities (SRI) analysis of C NMR

We recorded temperature-dependent high-resolution ¹³C NMR spectra of dry and swollen poly(acrylate)s [poly(2-methoxyethyl acrylate) (PMEA), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(tetrahydrofurfuryl acrylate) (PTHFA)] by dipolar decoupled-magic angle spinning (DD-MAS) and cross-polarization-magic angle spinning (CP-MAS) methods, to gain insight into their network structures and dynamics. Suppressed or recovered intensities (SRI) analysis of ¹³C CP-MAS and DD-MAS NMR was successfully utilized, to reveal portions of dry and swollen polymers which undergo fast and slow motions with fluctuation frequencies in the order of 10⁸ Hz and 10⁴-10⁵ Hz, respectively. Fast isotropic motions with frequency higher than 10⁸ Hz at ambient temperature were located to the portions in which ¹³C CP-MAS NMR signals of swollen PMEA were selectively suppressed. In contrast, low-frequency motion was identified to the portions in which ¹³C DD-MAS (and CP-MAS) signals are most suppressed at the characteristic suppression temperature(s) T_s. Network of PMEA gels (containing 7 wt% of water) turns out to be formed by partial association of backbones only, as manifested from their T_s gradient at lowered temperature, whereas networks of PHEMA (containing 40 wt% of water) and PTHFA (9 wt% of water) gels are tightly formed through mutual inter-chain associations of both backbones and side-chains, as viewed from the raised T_s values for both near at ambient temperature. It is also interesting to note that flexibility of gel network (PMEA > PTHFA > PHEMA) characterized by the suppression temperature T_s (PMEA < PTHFA < PHEMA) is well related with a characteristic parameter for biocompatibility such as the production of TAT (thrombin-antithrombin III complex) as a marker of activation of the coagulation system.     

Polyethylenes produced with zirconocene immobilized on MAO-modified silicas

The effect of Al content on MAO-modified silicas was evaluated on catalyst activity, on polymer properties and on residual metal content in the resulting polyethylenes. MAO-modified silicas were prepared by impregnating MAO toluene solutions in concentration range between 0.5 and 20.0 wt% Al/SiO₂. Commercial MAO-modified silica (Witco) containing 24.4 wt% Al/SiO₂ was used for comparative reasons. The resulting modified-silicas were employed as supports for grafting (nBuCp)₂ZrCl₂. Using external MAO as cocatalyst (Al/Zr=2000) no difference in catalyst activity was observed. Nevertheless, for Al/Zr=500, catalyst activities were shown to be higher for supported zirconocene systems containing 0.0-2.0 wt% Al/SiO₂ range. According to DSC analysis, one T_m peak was detected for polymer obtained with catalyst prepared with 0.5 wt% Al/SiO₂ (135 °C), but two T_m peaks were observed for polymers obtained with catalysts prepared with 10.0 wt% Al/SiO₂ (136 and 141 °C) and 20.0 wt% Al/SiO₂ (133 and 141 °C).     

Swelling behavior of amphiphilic gels based on hydrophobically modified dimethylaminoethyl methacrylate

The amphiphilic gels based on hydrophobically modified dimethylaminoethyl methacrylate with different 1-bromoalkanes (1-C_nH_2n+1Br, n = 2, 4, 6, 8, 12) were synthesized by radiation-induced polymerization and crosslinking. The length of alkyl side chains had significant influence on the swelling behavior of the resulting gels. The swelling degree of the gels decreased with the increase of side chain length, and the gel hardly swelled when n = 12. The effect of temperature and ionic strength on the swelling behavior of the resulting gels revealed that (1) the gels with longer side chains (n ≥ 8) had upper critical solution temperature, while other gels were not thermo-sensitive. (2) Antipolyelectrolyte effect was observed when immersing the gels (n ≥ 8) in NaCl solutions in certain concentration range. The dramatic difference in swelling behavior was attributed to the different gel structures. The gels with short side chains (n ≤ 6) had cellular structure of normal polyelectrolyte gels. The gels (n ≥ 8) had an aggregation gel structure caused by the hydrophobic interaction among alkyl groups and the formation of ion-cluster between tetra-alkyl ammonium cation and Br⁻, which had been analyzed with the aid of SEM, Br⁻-selective electrode and fluorescence molecular probe.     

Electrochemical properties of LaBaCo2O5+δ-Sm0.2Ce0.8O1.9 composite cathodes for intermediate-temperature solid oxide fuel cells

The electrochemical properties of LaBaCo₂O_5+δ-xSm_0.2Ce_0.8O_1.9 (LBCO-xSDC, x = 20, 30, 40, 50, 60, wt%) were investigated for the potential application in intermediate-temperature solid oxide fuel cells (IT-SOFCs). The LBCO-50SDC composite cathode exhibited the best electrochemical performance in the LBCO-xSDC cathodes. With x = 50 wt%, the ASR was 1.308 Ω cm² at 500 °C (0.267 Ω cm² at 600 °C and 0.052 Ω cm² at 700 °C). The maximum of exchange current density i₀ was 0.5630 A cm⁻² at 700 °C. The improved electrochemical properties of LBCO-50SDC were ascribed to the porous structures of the cathode and more cathode/electrolyte/gas triple phase boundary (TPB) areas.     

Novel processable precursor for BN by the polymer-derived ceramics route

Novel precursors polymerized from (alkylamino)borazines (AAB) were synthesized and transformation of processable poly-AAB to boron nitride (BN) was researched. The AAB monomers of the type (BNH)₃(NHR)₃ were synthesized via ammolysis of 2,4,6-trichloroborazine (TCB) with different propylamines under mild conditions. The specially designed monomers served as molecular precursors for BN by the polymer-derived ceramics route. The processability of the polymeric precursors varied with propylamino-groups of AAB linked with boron atoms on (BNH)₃. The good processability of the poly[2,4,6-tris(iso-propylamino)borazine] (PTPⁱAB) was proven by melt-spinning it into polymer fiber. Furthermore, the PTPⁱAB gave a ceramic yield of about 53 wt% in Ar at 1200 °C by TGA. Based on FTIR, Raman, XRD, XPS and elemental analysis, the pyrolytic product of PTPⁱAB showed a composition of BN_1.07. In addition, the BN illustrated excellent oxygen resistance in air.     

Densification behavior and properties of hot-pressed ZrC ceramics with Zr and graphite additives

Densifications of hot-pressed ZrC ceramics with Zr and graphite additives were studied at 1800-2000 °C. ZrC with 8.94 wt% Zr additive (named ZC10) sintered at 1900-2000 °C achieved higher relative densities (>98.4%) than that of additive-free ZrC (<83%). The densification improvement was attributed to the formation of non-stoichiometric ZrC_0.9, whereas there had rapid grain growth with grain size about 50-100 μm in ZC10. By adding co-doped additive of Zr plus C and adjusting the molar ratio of Zr/C, ZrC with co-doped additives with Zr/C molar ratio at 1:2 (named ZC12), ZrC ceramics with both high relative density (98.4%) and fine microstructures (grain size about 5-10 μm) were obtained at 1900-2000 °C. Effect of formation of non-stoichiometric ZrC_1−x on densification of ZrC was discussed. The Vickers hardness and indentation toughness of ZC10 and ZC12 samples sintered at 1900 °C were 17.8 GPa and 3.0 MPa m^1/2, 16.2 GPa and 4.7 MPa m^1/2, respectively.     

pH-sensitive and bioadhesive poly(β-amino ester)-poly(ethylene glycol)-poly(β-amino ester) triblock copolymer hydrogels with potential for drug delivery in oral mucosal surfaces

A series of novel pH-sensitive triblock copolymers composed of poly(β-amino ester)-poly(ethylene glycol)-poly(β-amino ester) (PAE-PEG-PAE) were synthesized by conjugating poly(β-amino ester) to poly(ethylene glycol). The resulting polymers were characterized by ¹H and ¹³C NMR in CDCl₃ and gel permeation chromatography in tetrahydrofuran. The concentrated polymer solutions (30 wt%) exhibited a gel-to-sol transition in the pH range 6.4-7.8. The gel window spanned physiological conditions (37 °C, pH 7.4). After injection into a rat, the copolymer solution (30 wt%) changed to a gel in a short time. This copolymer hydrogel showed bioadhesive properties and in vitro release of lidocaine was controllable.     

A visible light photoinitiator system to produce acrylamide based smart hydrogels: Ru(bpy)3 as photopolymerization initiator and molecular probe of hydrogel microenvironments

A novel visible light bimolecular photoinitiator system (tris(2,2′-bipyridine)ruthenium(II)/N,N-dimethylaniline) is shown to be able to polymerize N-isopropylacrylamide (NIPAM) and 2-Acrylamido-2-Methylpropanesulfonic Acid (AMPS), in aqueous solution, to render high molecular weight polymers and crosslinked gels. The photoinitiator is especially useful to synthesize thermosensitive polymers and gels, because it could be used at temperatures below the phase transition, allowing the polymer chain to grow in its uncoiled state. The polymerization and conversion rates are affected by the structure of the monomer, decreasing in the order NIPAM > AAm > AMPS. The properties of the gels agree with literature data, suggesting that the method is able to produce conventional and smart hydrogels. The microenvironments present near linear polymers and inside crosslinked gels were investigated by measuring fluorescence lifetimes and steady state anisotropy of the metallic complex (Ru(bpy)₃⁺², present in the solution. Clear effects of the polymer presence on the photophysical properties of the complex are observed. Therefore, the same metallic complex could be used as photoinitiator of vinyl polymerization and as molecular probe to sense the hydrogel microenvironments.     

Preparation of exfoliated isotactic polypropylene/alkyl-triphenylphosphonium-modified montmorillonite nanocomposites via in situ intercalative polymerization

Alkyltriphenylphosphonium-modified montmorillonite(PMMT) was used to prepare TiCl₄/MgCl₂/PMMT compound catalyst and exfoliated i-PP/PMMT nanocomposites were prepared by in situ intercalative polymerization of propylene with TiCl₄/MgCl₂/PMMT catalyst. The catalytic efficiency of the above catalyst under optimum polymerization condition could reach as high as 1300 kg/(molTi h) and the combining of PMMT with Z-N catalyst do not change the stereo-regulation catalytic properties of the Z-N catalyst. The synthesized PP possessed high isotacticity, melting point and molecular weight. Wide angle X-ray diffraction (XRD) and transmission electron microscopy (TEM) examinations evidenced the nanocomposites obtained were exfoliated ones.     

Effect of zwitterionic salt on the electrochemical properties of a solid polymer electrolyte with high temperature stability for lithium ion batteries

In this study, we prepare a kind of solid polymer electrolyte (SPE) based on N-ethyl-N′-methyl imidazolium tetrafluoroborate (EMIBF₄), LiBF₄ and poly(vinylidene difluoride-co-hexafluoropropylene) [P(VdF-HFP)] copolymer. The resultant SPE displays high thermal stability above 300 °C and high room temperature ionic conductivity near to 10⁻³ S cm⁻¹. Its electrochemical properties are improved with incorporation of a zwitterionic salt 1-(1-methyl-3-imidazolium)propane-3-sulfonate (MIm3S). When the SPE contains 1.0 wt% of the MIm3S, it has a high ionic conductivity of 1.57 × 10⁻³ S cm⁻¹ at room temperature, the maximum lithium ions transference number of 0.36 and the minimum apparent activation energy for ions transportation of 30.9 kJ mol⁻¹. The charge-discharge performance of a Li₄Ti₅O₁₂/SPE/LiCoO₂ cell indicates the potential application of the as-prepared SPE in lithium ion batteries.     

Electrospun PVdF-based fibrous polymer electrolytes for lithium ion polymer batteries

This paper discusses the preparation of microporous fibrous membranes from PVdF solutions with different polymer contents, using the electrospinning technique. Electrospun PVdF-based fibrous membranes with average fiber diameters (AFD's) of 0.45-1.38 μm have an apparent porosity and a mean pore size (MPS) of 80-89% and 1.1-4.3 μm, respectively. They exhibited a high uptake of the electrolyte solution (320-350%) and a high ionic conductivity of above 1 × 10⁻³ s/cm at room temperature. Their ionic conductivity increased with the decrease in the AFD of the fibrous membrane due to its high electrolyte uptake. The interaction between the electrolyte molecules and the PVdF with a high crystalline content may have had a minor effect on the lithium ion transfer in the fibrous polymer electrolyte, unlike in a nanoporous gel polymer electrolyte. The fibrous polymer electrolyte that contained a 1 M LiPF₆-EC/DMC/DEC (1/1/1 by weight) solution showed a high electrochemical stability of above 5.0 V, which increased with the decrease in the AFD The interfacial resistance (R_i) between the polymer electrolyte and the lithium electrode slightly increased with the storage time, compared with the higher increase in the interfacial resistance of other gel polymer electrolytes. The prototype cell (MCMB/PVdF-based fibrous electrolyte/LiCoO₂) showed a very stable charge-discharge behavior with a slight capacity loss under constant current and voltage conditions at the C/2-rate of 20 and 60 °C.     

Structural development and mechanical properties on immiscible and miscible blends from isotactic polypropylene and ethylene-1-hexene copolymers under uniaxial drawing

Isotactic polypropylene and ethylene-1-hexene copolymers containing 32 and 57 mol% of 1-hexene copolymers blends (i-PP/EH32 and i-PP/EH57) were prepared by solution blending, precipitating followed by drying and hot pressing. The two blends were subject to investigation on structure and mechanical properties of these blends under uniaxial drawing. The i-PP/EH32 and i-PP/EH57 represented the immiscible and miscible blends, respectively. The tensile stresses and strains at breaking point of i-PP/EH57 were remarkably higher than those of i-PP/EH32 at room temperature. From wide-angle X-ray diffraction (WAXD) measurement, it was observed that the orientation of crystallites occurred early and then propagated gradually up to about drawing ratio 8 because chains of EH57 copolymer were incorporated into the amorphous regions between lamellae of i-PP. In the WAXD patterns of i-PP/EH57, the oriented spot reflections coexsisted with unoriented ring reflections up to draw ratio higher than in pure i-PP. On the other hand, the two-phase structure was observed from TEM and AFM in i-PP/EH32, and on the drawing, separation at the interface between two-phase was observed in i-PP/EH32 even at the low strain.     

Microstructure and mechanical properties of silicon carbide processed by Spark Plasma Sintering (SPS)

The unique combination of SiC properties opens the ways for a wide range of SiC-based industrial applications. Dense silicon carbide bodies (3.18±0.01 g/cm³) were obtained by an SPS treatment at 2050 °C for 10 min using a heating rate of 400 °C/min, under an applied pressure of 69 MPa. The microstructure consists of fine, equiaxed grains with an average grain size of 1.29±0.65 μm. TEM analysis showed the presence of nano-size particles at the grain boundaries and at the triple-junctions, formed mainly from the impurities present in the starting silicon carbide powder. The HRTEM examination revealed high angle and clean grain boundaries. The measured static mechanical properties (H_V=32 GPa, E=440 GPa, σ_b=490 MPa and K_C 6.8 MPa m^0.5) and the Hugoniot Elastic Limit (HEL=18 GPa) are higher than those of hot-pressed silicon carbide samples.     

Effects of bismuth oxide on the sinterability of hydroxyapatite

The sinterability of Bi₂O₃-doped hydroxyapatite (HA) has been studied and compared with the undoped HA. Varying amounts of Bi₂O₃ ranging from 0.05 wt% to 1.0 wt% were mixed with the HA. The study revealed that most sintered samples composed of the HA phase except for compacts containing 0.3, 0.5 and 1.0 wt% Bi₂O₃ and when sintered above 1100 °C, 1000 °C and 950 °C, respectively. In general, the addition of 0.5 wt% Bi₂O₃ was identified as the optimum amount to promote densification as well as to improve the mechanical properties of sintered HA at low temperature of 1000 °C. Throughout the sintering regime, the highest value of relative bulk density of 98.7% was obtained for 0.5 wt% Bi₂O₃-doped HA when sintered at 1000 °C. A maximum Young's modulus of 119.2 GPa was measured for 0.1 wt% Bi₂O₃-doped HA when sintered at 1150 °C. Additionally, the ceramic was able to achieve highest hardness of 6.08 GPa and fracture toughness of 1.21 MPa m^1/2 at sintering temperature of 1000 °C.