Reverse atom transfer radical polymerization of MMA via immobilized catalysts in imidazolium ionic liquids

Reverse atom transfer radical polymerization (RATRP) of methyl methacrylate (MMA) employing immobilized catalyst was approached at 50 and 60°C in [C₈mim]PF₆, and compared with the polymerization of MMA DMF as solvent. Other ionic liquids, [C₆mim]BF₄, [C₈mim]BF₄, and [C₁₂mim]BF₄, were used as solvents to perform the RATRP of MMA. By comparison, we found that the [C₈mim]PF₆ was the best solvent in this immobilized catalyst system and the polymerization was best controlled. In addition, the immobilized catalyst spherules can easily separate from the reaction mixture, which avoids the prevalent problem of the catalyst residual in RATRP and also gives us a possibility to recycle the catalyst system. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3915–3919, 2007     

Kinetic study of atom transfer radical polymerization of methyl methacrylate in ionic liquids

The kinetics of methyl methacrylate (MMA) homopolymerization performed by atom transfer radical polymerization (ATRP) is investigated in detail using ethyl‐2‐bromopropionate (EPN‐Br) as initiator, CuBr as catalyst, and pentamethyldiethylenetriamine (PMDETA) as ligand in ionic liquids (ILs) and acetonitrile. ILs in this research covered two different substitutional imidazolium cations and anions including halogen and halogen‐free ones. The typical cations include 1‐butyl‐3‐methylimidazolium, 1‐ethyl‐3‐methylimidazolium and the typical anions include bromide, tetrafluoroborate. The effects of solvents, temperature, and reaction ingredients ratios on the polymerization kinetics are all investigated in this article and the apparent energy of activation (ΔE) calculated for the ATRP of MMA in 1‐butyl‐3‐methyl‐imidazolium tetrafluoroborate is 6.95 KJ/mol. The number‐average molecular weights (M_n) increase linearly with conversion but are much higher than the theoretical values. It is probably due to the low concentration of deactivator at the early stage of polymerization and the lower bond energy of C‐Br in PMMA‐Br than that in EPN‐Br. Moreover, the catalyst is easily separated from the polymer and the regenerated catalyst is reused for more than three times. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Reverse atom transfer radical polymerization of methyl methacrylate in different solvents

The reverse atom transfer radical polymerization of methyl methacrylate was investigated in different solvents: xylene, N,N‐dimethylformamide, and pyridine. The polymerizations were uncontrolled, using 2,2′‐bipyridine as a ligand in xylene and pyridine because the catalyst (CuBr₂/2,2′‐bipyridine complex) had poor solubility in the xylene system. In the pyridine system, the solubility of the catalyst increased, but the solvent could complex with CuBr₂, which influenced the control of the polymerization. In the N,N‐dimethylformamide system, the catalyst could be dissolved in the solvent completely, but the ? N(CH₃)₂ group in N,N‐dimethylformamide could also complex with CuBr₂, so the polymerization could not be well controlled. The ligand of 4,4′‐di(5‐nonyl)‐2,2′‐bipyridine was also investigated in xylene; the introduction of the ? CH(C₄H₉)₂ group enabled the CuBr₂/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine complex to easily dissolve in xylene, and the polymerizations were well controlled. The number‐average molecular weight increased linearly with the monomer conversion from 4280 to 14,700. During the whole polymerization, the polydispersities were quite low (1.07–1.10). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

纤维素-甲基丙烯酸丁酯的原子转移自由基聚合

以2-溴异丁酰溴为溴化剂,在离子液体([Amim]Cl)中与纤维素反应制备溴化纤维素大分子引发剂,以溴化纤维素/CuBr/N,N',N',N″,N″-五甲基二乙烯基三胺(PMDETA)为引发体系,N,N-二甲基甲酰胺(DMF)为溶剂,研究了甲基丙烯酸丁酯(BMA)的原子转移自由基聚合反应(ATRP)。合成了结构明晰的以纤维素为主链,聚甲基丙烯酸丁酯为支链的接枝共聚物Cellulose-g-PBMA。通过FTIR、1HNMR和GPC分别对大分子引发剂和接枝聚合物进行了分析。考察了聚合反应的活性特征,反应时间、催化体系、溶剂对聚合物相对分子质量(简称分子量,下同)及分子量分布的影响。结果表明,聚合反应转换率随时间呈线性增加,反应过程是活性可控聚合,催化剂和溶剂分别选用PMDETA/CuBr和DMF使反应更高效。     

Pseudohalogens in atom transfer radical polymerization of methyl methacrylate

In recent advances in controlled radical polymerization, atom transfer radical polymerization (ATRP) has achieved increasing interest. This investigation reports the ATRP of methyl methacrylate (MMA) using pseudohalogens as initiator as well as an anion for copper catalyst. The results were compared with the conventional halide system. Different pseudohalides were used as the initiator for the ATRP of MMA in combination with CuX (X = pseudohalide or halide) as the catalyst. Pseudohalide initiator in combination with Cu(halide) catalyst leads to inefficient ATRP due to slow initiation. Pseudohalide initiator in combination with Cu(pseudohalide) catalyst leads to uncontrolled or no polymerization. The polymers were characterized by using GPC, IR, MALDI‐TOF‐MS, and TGA analysis. IR and MALDI analysis showed that the resultant polymer had pseudohalide as the end group. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3857–3864, 2007     

Well-defined poly(methyl methacrylate) grafted to polyethylene with reverse atom transfer radical polymerization initiated by peroxides

A reverse atom transfer radical polymerization (ATRP) with FeCl₃/PPh₃/peroxides was applied to grafting of methyl methacrylate (MMA) to polyethylene (PE). Peroxides on PE were generated by γ-ray irradiation in air. A reverse ATRP of methyl methacrylate with benzoyl peroxide, cumene hydroperoxide, and di-t-butyl peroxide as models of the PE peroxides was confirmed to proceed successfully in living fashion. In an inhomogeneous (bulk) grafting system, the grafting ratio (GR) of PMMA to PE weights, molecular weight (M_n) and its distribution of grafted PMMA were not controlled with time, i.e. the grafting of MMA with a reverse ATRP to the oxidized PE failed in well-defined grafting. On the other hand, a homogeneous (in o-xylene solution) grafting system provided a well-controlled M_n, narrow polydispersity of grafted PMMA and a linear relation between M_n and GR, indicating a controlled grafting. The controlled grafting with a reverse ATRP combined to a radiation-induced grafting was achieved successfully. The grafting of MMA to polypropylene in this way also seemed to be controlled well.     

Homogeneous reverse atom transfer radical polymerization of glycidyl methacrylate and ring-opening reaction of the pendant oxirane ring

The homogeneous reverse atom transfer radical polymerization (reverse ATRP) of glycidyl methacrylate (GMA) was carried out in bulk, using 2,2′-azobisisobutyronitrile (AIBN) as the initiator and N,N-n-butyldithiocarbamate copper (Cu(SC(S)N(C₄H₉)₂)₂) as the catalyst. The polymerization showed typical controlled/‘living’ polymerization behavior, i.e. first-order kinetics, well-controlled molecular weight (M_n) and narrow molecular weight distribution (M_w/M_n). ¹H NMR and IR spectra showed that the pendant epoxy groups in PGMA polymer remained intact throughout the polymerization of GMA. A phosphorated PGMA (PPGMA) polymer was obtained by phosphonation reaction of the pendant epoxy groups in PGMA with diphenylphosphinic chloride (DPPC). Thermal behavior of the PPGMA was studied by TG and DTG. A major DTG peak at 340 °C was observed for the PPGMA.     

离子液体在原子转移自由基聚合中的应用进展

综述了离子液体作为溶剂、单体、引发剂或配体参与原子转移自由基聚合。离子液体具有独特的物理化学性能,可作为溶剂或配体直接参与聚合反应,也可以通过化学修饰合成离子液体型聚合单体或引发剂,利用ATRP技术制备出含有聚合离子液体链段或端基的功能性高分子材料。这种材料可应用于太阳能电池、聚合物电池、光敏元件、吸附剂或传感元件等多个领域,成为高分子材料研究领域的一个重要课题。     

咪唑类离子液体高效吸收二氯甲烷

合成了一系列常规离子液体1-丁基-3-甲基咪唑四氟硼酸盐([Bmim][BF4])、1-丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF6])、1-丁基-3-甲基咪唑双三氟甲磺酰亚胺盐([Bmim][NTf2])、1-丁基-3-甲基咪唑双氰胺盐([Bmim][DCA])、1-丁基-3-甲基咪唑硫氰酸盐([Bmim][SCN])、1-乙基-3-甲基咪唑硫氰酸盐([Emim][SCN])和N-丁基吡啶硫氰酸盐([BPy][SCN]),用智能重量分析仪(IGA)测定不同温度和分压下离子液体吸收二氯甲烷(DCM)的容量。结果表明,[Bmim][SCN]具有最高的二氯甲烷吸收容量(1.46 g/g, 303.15 K, 60 kPa),5次循环后吸收能力无明显下降,[Bmim][SCN]基本可完全再生,能循环使用。量化计算结果表明[SCN]?可与二氯甲烷形成氢键,增强其对二氯甲烷的吸收能力。     

Atom transfer radical suspension polymerization of methyl methacrylate catalyzed by CuCl/bpy

Atom transfer radical suspension polymerization (suspension ATRP) of methyl methacrylate (MMA) was carried out using 1-chloro-1-phenylethane (1-PECl) as initiator, copper chloride/bipyridine (CuCl/bpy) as catalyst. The polymerization was accomplished with a mechanical agitator under the protection of nitrogen atmosphere. Apart from the dispersing agent (1% PVA), NaCl was also used in the water phase to decrease the diffusion of CuCl/bpy to water and the influence of the concentration of NaCl was investigated. Subsequently, the kinetic behavior of the suspension ATRP of MMA at different temperatures was studied. At 90 and 95 °C, the polymerization showed first order with respect to monomer concentration until high conversion. The molecular weight (M_n) of the polymer increased with monomer conversion. However, at lower temperatures, different levels of autoacceleration was observed. The polymerization deviated from first order with respect to monomer concentration when the conversion was up to some degree. The lower the temperature was, the more the deviation displayed. On comparison with bulk ATRP of MMA, the rate of suspension ATRP was much faster.     

Copper(I) bromide coordinated by the ionic liquid 1‐[(diethyl amine)amine]ethyl‐3‐methyl imidazolium chloride to catalyze the atom transfer radical polymerization of methyl methacrylate in 1‐allyl‐3‐methyl imidazolium chloride

A coordinating ionic liquid (IL), 1‐[(diethyl amine)amine]ethyl‐3‐methyl imidazolium chloride ([N₃MIM]Cl), was prepared as an alternative to a simple organic ligand to coordinate to copper(I) bromide (CuBr). We, thereby, obtained a novel catalyst for atom transfer radical polymerization (ATRP) reactions. This catalyst was applied to the ATRP of methyl methacrylate in the IL 1‐allyl‐3‐methyl imidazolium chloride ([AMIM]Cl). The chemical structures of the ILs obtained were confirmed by Fourier transform infrared spectroscopy, mass spectrometry, and ¹H‐NMR analyses. The coordination ability of [N₃MIM]Cl was assessed by cyclic voltammetry, and the redox potential of [N₃MIM]Cl–CuBr was ?0.507 V. The [N₃MIM]Cl–CuBr complex was expected to be a markedly more active catalyst than the amine DETA–CuBr complex. The coordination mode toward CuBr was also examined. The [N₃MIM]Cl–CuBr catalyst system showed good controllability in the aforementioned ATRP reaction in [AMIM]Cl. The Cu catalyst was easily separated from the obtained polymer with the coordinating IL as a ligand. Consequently, the coordinating IL overcame the shortcomings of traditional organic ligands, such as poor compatibility with IL media and poor separation of the catalyst from the polymer; this makes it highly promising for applications in the ATRP field. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45484.     

Atom transfer radical polymerization of methyl methacrylate induced by an initiator derived from an ionic liquid

An ionic liquid, 1‐(2‐bromoisobutyryloxyethyl)‐3‐methylimidazolium hexafluorophosphate, was synthesized to act as the initiator of the atom transfer radical polymerization of methyl methacrylate (MMA). By a combination with CuBr and pentamethyldiethylenetriamine, the ionic liquid initiated the free radical polymerization of MMA to proceed in a controlled way over a wide temperature range of 0 to 60 °C. The number‐average molecular weight of the poly(methyl methacrylate) (PMMA) increased with monomer conversion and the polydispersity was relatively narrow. End‐group analysis by proton NMR indicated the presence of the initiator fragments at the ends of the polymer main chain. Lowering the reaction temperature had the result of increasing the content of rr triads. The glass transition temperature was higher for PMMA obtained at lower temperature than at higher temperature. The solubility of the PMMA in methanol increased with the incorporation of imidazolium groups in the polymer. Copyright © 2006 Society of Chemical Industry     

Emulsion atom transfer radical polymerization of 2-ethylhexyl methacrylate

The emulsion atom transfer radical polymerization (ATRP) of 2-ethylhexyl methacrylate (EHMA) was carried out with ethyl 2-bromoisobutyrate (EBiB) as an initiator and copper bromide (CuBr)/4,4′-dinonyl-2,2′-bipyridyl (dNbpy) as a catalyst system. The effects of surfactant type and concentration, temperature, monomer/initiator ratio, and CuBr₂ addition on the system livingness, polymer molecular weight control, and latex stability were examined in detail. It was found that the polymerization systems with Tween 80 and Brij 98 as surfactants at 30 °C gave the best latex stability. The polymer samples prepared under these conditions had narrow molecular weight distributions (M_w/M_n=1.1-1.2) and linear relationships of number-average molecular weight versus monomer conversion.     

咪唑类离子液体的催化加成反应

离子液体作为一种新型绿色溶剂,具有许多独特的物理化学性质,可用在许多重要领域。简单介绍离子液体及其特点,重点介绍在咪唑类离子液体中Diels-Alder,Michael,Bischler-Napieralski等典型的加成反应。     

Efficiency of ligands in atom transfer radical polymerization of lauryl methacrylate and block copolymerization with methyl methacrylate

Atom transfer radical polymerization of lauryl methacrylate (LMA) was carried out in the presence of various ligands using ethyl-2-bromoisobutyrate as initiator and CuBr as catalyst in toluene at 95 °C. The ligands used were 2,2′-bipyridyl,4,4′-dimethyl-2,2′-bipyridyl, N,N,N′,N′,N″-pentamethyldiethylenetriamine (PMDETA) and N-(n-propyl)-2-pyridylmethanimine (PPMI). Controlled polymerization was observed with PMDETA and PPMI ligands and poly(LMA)s with narrow molecular weight distribution (MWD) (M_w/M_n≤1.2) were obtained. The first-order time-conversion plot showed the presence of termination in the presence of PMDETA. A linear first-order time-conversion plot with a small induction period (∼10 min) was observed in the presence of PPMI ligand. Di-block copolymers of LMA and methylmethacrylate with controlled molecular weight and narrow MWDs were synthesized via sequential monomer addition.     

Effect of the medium on the stereostructure of poly(methyl methacrylate) synthesized in ionic liquids

Poly(methyl methacrylate) (PMMA) was synthesized in different ionic liquids (IL) by free radical polymerization. The average molecular weight and polydispersity of the PMMA were measured by gel permeation chromatography. It is found that ILs have effect not only on the molecular weights but also on the stereostructure of PMMA. From the FTIR and NMR analysis, it was confirmed that the chemical structure of PMMA synthesized in ILs was similar to the one obtained in conventional solvents while the stereostructure was influenced by the different IL used. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2199–2202, 2006     

Synthesis of methyl methacrylate and N‐aryl itaconimide block copolymers via atom‐transfer radical polymerization

The paper describes the synthesis of block copolymers of methyl methacrylate (MMA) and N‐aryl itaconimides using atom‐transfer radical polymerization (ATRP) via a poly(methyl methacrylate)–Cl/CuBr/bipyridine initiating system or a reverse ATRP AIBN/FeCl₃·6H₂O/PPh₃ initiating system. Poly(methyl methacrylate) (PMMA) macroinitiator, ie with a chlorine chain‐end (PMMA‐Cl), having a predetermined molecular weight (M_n = 1.27 × 10⁴ g mol^?1) and narrow polydispersity index (PDI = 1.29) was prepared using AIBN/FeCl₃·6H₂O/PPh₃, which was then used to polymerize N‐aryl itaconimides. Increase in molecular weight with little effect on polydispersity was observed on polymerization of N‐aryl itaconimides using the PMMA‐Cl/CuBr/Bpy initiating system. Only oligomeric blocks of N‐aryl itaconimides could be incorporated in the PMMA backbone. High molecular weight copolymer with a narrow PDI (1.43) could be prepared using tosyl chloride (TsCl) as an initiator and CuBr/bipyridine as catalyst when a mixture of MMA and N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 was used. Thermal characterization was performed using differential scanning calorimetry (DSC) and dynamic thermogravimetry. DSC traces of the block copolymers showed two shifts in base‐line in some of the block copolymers; the first transition corresponds to the glass transition temperature of PMMA and second transition corresponds to the glass transition temperature of poly(N‐aryl itaconimides). A copolymer obtained by taking a mixture of monomers ie MMA:N‐(p‐chlorophenyl) itaconimide in the molar ratio of 0.83:0.17 showed a single glass transition temperature. Copyright © 2005 Society of Chemical Industry     

咪唑类离子液体在微乳液中的应用

阐述了离子液体的定义、种类和性质,介绍了离子液体中形成有序分子组合体（包括液晶、胶束、囊泡和微乳液）的研究进展。综述了咪唑类离子液体作为极性、非极性和表面活性剂组分,分别取代微乳液体系中的极性、非极性和表面活性剂组分,形成油包离子液体（ILs／O）、离子液体包油（O／ILs）和双连续的新型微乳液体系的研究进展。     

RAFT miniemulsion polymerization of methyl methacrylate

It has been well documented that RAFT miniemulsion polymerization has broader molecular weight distribution, compared with its bulk polymerization counterpart. Interestingly, it was found that the PDI value of RAFT miniemulsion polymerization of methyl methacrylate (MMA) mediated by 2-cyranoprop-2-yl dithiobenzoate (CPDB) was still as low as its corresponding bulk polymerization did. PDI could be as low as 1.13 even with typical sodium dodecyl sulfate (SDS, 1 wt%, surfactant) and n-hexadecane (HD, 2 wt%, costablizer) concentrations. When the polymerization was carried out at 60 °C, a dramatic increase in PDI (>1.4) was observed after 80% monomer conversion since RAFT addition reaction became diffusion-controlled. Increasing the polymerization temperature to 80 °C could reduce the PDI to 1.2 even at 100% monomer conversion. The compartmentalization effect of radicals was surprisingly absence before 30% monomer conversion but became pronounced afterwards in the miniemulsion polymerization. Thus, it still took less time to finish the miniemulsion polymerization with the increase of the surfactant levels.