The Structure of Fusion-Cast High-Chrome Oxide Refractories in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> - MgO - Al<Subscript>2</Subscript>O<Subscript>3</Subscript> System

The phase composition and structure of fusion-cast refractories composed of 57.0 – 84.2% Cr₂O₃, 4.3 – 36.1% MgO, 2.0 – 9.7% Al₂O₃, and 2.4 – 6.9% SiO₂ have been studied by petrographic and x-ray spectral microprobe analysis methods. Refractories high in MgO with modulus M = (Cr₂O₃ +Al₂O₃)/MgO = 1.64 – 3.1 are shown to consist of spinel phase Mg(Cr, Al)₂O₄ and silicate glass. Refractory materials (80.8 – 84.2% Cr₂O₃, 4.3 – 4.7% MgO, 2.0 – 9.7% Al₂O₃, and 2.7 – 6.9% SiO₂ with M = 18.7 – 20.2) are three-phase systems composed of spinel, escolaite, and glass phase. These materials, owing to their high corrosion resistance, have promising potentiality for practical applications.__________Translated from Novye Ogneupory, No. 12, pp. 69 – 74, December, 2004.     

Synthesis and properties of flux-cast refractories in the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-MgO-B<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Details are given of the synthesis and testing of flux-cast refractory materials in the alumina-rich region of the Al₂O₃-MgO-B₂O₃ system; XRD and petrography indicate that the main structure-forming phases are corundum and magnesian spinel. In subordinate amounts there are the boroaluminate 9Al₂O₃·2B₂O₃ and the previously unknown compound 4Al₂O₃·MgO·2B₂O₃, whose composition has been established by microprobe analysis. Corrosion tests showed that three-component systems containing magnesium and boron oxides at levels of 5–10% do not increase the corrosion resistance of refractories in molten sodium-calcium-silicate glass and electrovacuum borosilicate glass. __________ Translated from Novye Ogneupory, No. 3, pp. 161–163, March, 2008.     

Volumetric nucleation of crystals catalyzed by Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> in glass based on furnace slags

The features of the volumetric nucleation of crystals in glass obtained by melting furnace slags with the additive of SiO₂, chromium sesquioxide Cr₂O₃, are studied by the methods of differential thermal and Xray phase analysis and optical microscopy. Upon the introduction of Cr₂O₃ as the catalytic additive, two phases are sequentially formed in the glass: magnesiochromite (MgO · Cr₂O₃) and diopside (CaO · MgO · 2SiO₂). The characteristics of homogeneous and heterogeneous crystallization are determined: the stationary nucleation rate, nonstationary nucleation time, crystal growth rate, and their temperature dependences are obtained. Practical recommendations on the use of the obtained glass are given.     

Synthesis and properties of the composite ceramics from nanocrystalline Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-30% Y<Subscript>0.1</Subscript>Zr<Subscript>0.9</Subscript>O<Subscript>2</Subscript> prepared from a water-alcohol solution

The hydrogel of the mixed oxide Al₂O₃-30% Y_0.1Zr_0.9O₂ was prepared by precipitation of ammonia from a water-alcohol mixture (1 : 5). The Al₂O₃-30% Y_0.1Zr_0.9O₂ compound thus synthesized was characterized using differential scanning calorimetry, transmission electron microscopy, and the BET adsorption method. The obtained sample consisted of spherical particles with an average size of 16–20 nm and a specific surface area of 167 m²/g. The Al₂O₃-30% Y_0.1Zr_0.9O₂ powder was pressed at 300 MPa and then calcinated at 1600°C for 2 h in air. The topographic and structural features of the prepared ceramics were determined using atomic force microscopy and X-ray electron probe microanalysis. The porosity, the Vickers microhardness, and the tensile strength were determined by mercury porometry.     

Structure and properties of a composite material obtained by thermal explosion in a mixture of Ni + Al + Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>

The synthesis of a composite material by thermal explosion in a reaction mixture of Ni + Al + Cr₂O₃ was studied. The thermodynamic parameters of combustion of the systems studied were estimated to predict the composition of the inorganic products (condensed or gaseous) of self-propagating high-temperature synthesis and calculate the adiabatic combustion temperature. It is shown that the synthesis process involves competing reactions in the sample volume which are responsible for the formation of a multiphase product. The influence of the content of Cr₂O₃ in the reaction system on the strength characteristics of the product synthesis was studied. The microstructure of the synthesized samples was examined, and their micro-hardness, toughness and residual porosity were determined. The possibility of obtaining a homogeneous material based on NiAl intermetallic compound containing dissolved chromium and chromium oxide nanoparticles is shown.     

Properties of materials of the system Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiC-C after firing in a reducing atmosphere

A set of studies is presented for the physicomechanical properties of corundum-graphite carbide-containing refractories. The efficiency of introducing silicon carbide as an antioxidant addition to Al₂O₃-SiC2-C-materials is established. The structure and phase composition of corundum-graphite silicon carbide-containing refractories based on an ethyl silicate binder fired in a reducing atmosphere are studied. __________ Translated from Novye Ogneupory, No. 10, pp. 52–56, October 2007.     

Phase Transformations in Stabilized ZrO<Subscript>2</Subscript> - Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> Compositions

Data on interactions in the ZrO₂ - Fe₂O₃ system stabilized by oxides in a high-temperature form at 1750°C are obtained. Of all zirconia-based compositions, only magnesium-zirconium cubic solid solution enters into an active reaction with Fe₂O₃ to yield MgFe₂O₄. The solid solutions formed by ZrO₂ with oxides of yttrium, neodymium, and calcium resist degradation by attack from Fe₂O₃; part of iron oxide undergoes dissolution in cubic ZrO₂. __________ Translated from Novye Ogneupory, No. 9, pp. 40 – 43, September, 2005.     

Electrochemical performance of La<Subscript>0.75</Subscript>Sr<Subscript>0.25</Subscript>Cr<Subscript>0.9</Subscript>M<Subscript>0.1</Subscript>O<Subscript>3</Subscript> perovskites as SOFC anodes in CO/CO<Subscript>2</Subscript> mixtures

The performance of La_0.75Sr_0.25Cr_0.9M_0.1O₃ (M = Mn, Fe, Co, and Ni) perovskitic materials as anodes was studied for a CO-fueled solid oxide fuel cell. The electrocatalytic performance and the tolerance to carbon deposition were investigated, while electrochemical characterization was carried out via AC impedance spectroscopy and cyclic voltammetry. The La_0.75Sr_0.25Cr_0.9Fe_0.1O₃ perovskite showed the best anode performance at temperatures above 900 °C; while at temperatures below 900 °C, the best performance was achieved with the La_0.75Sr_0.25Cr_0.9Co_0.1O₃ material. AC impedance spectroscopy was used for a semi-quantitative analysis of the LSC-M_0.1 anodes performance in view of total cell and charge transfer resistance. All anode materials exhibit high electronic conductivity and presumably do not substantially contribute to the overall cell resistance and concomitant ohmic losses.     

Separation characteristics of tetrapropylammoniumbromide templating silica/alumina composite membrane in CO<Subscript>2</Subscript>/N<Subscript>2</Subscript>, CO<Subscript>2</Subscript>/H<Subscript>2</Subscript> and CH<Subscript>4</Subscript>/H<Subscript>2</Subscript> systems

Nanoporous silica membrane without any pinholes and cracks was synthesized by organic templating method. The tetrapropylammoniumbromide (TPABr)-templating silica sols were coated on tubular alumina composite support ( γ-Al₂O₃/ α-Al₂O₃ composite) by dip coating and then heat-treated at 550 °C. By using the prepared TPABr templating silica/alumina composite membrane, adsorption and membrane transport experiments were performed on the CO₂/N₂, CO₂/H₂ and CH₄/H₂ systems. Adsorption and permeation by using single gas and binary mixtures were measured in order to examine the transport mechanism in the membrane. In the single gas systems, adsorption characteristics on the α-Al₂O₃ support and nanoporous unsupport (TPABr templating SiO₂/ γ-Al₂O₃ composite layer without α-Al₂O₃ support) were investigated at 20–40 °C conditions and 0.0–1.0 atm pressure range. The experimental adsorption equilibrium was well fitted with Langmuir or/and Langmuir-Freundlich isotherm models. The α-Al₂O₃ support had a little adsorption capacity compared to the unsupport which had relatively larger adsorption capacity for CO₂ and CH₄. While the adsorption rates in the unsupport showed in the order of H₂> CO₂> N₂> CH₄ at low pressure range, the permeate flux in the membrane was in the order of H₂≫N₂> CH₄> CO₂. Separation properties of the unsupport could be confirmed by the separation experiments of adsorbable/non-adsorbable mixed gases, such as CO₂/H₂ and CH₄/H₂ systems. Although light and non-adsorbable molecules, such as H₂, showed the highest permeation in the single gas permeate experiments, heavier and strongly adsorbable molecules, such as CO₂ and CH₄, showed a higher separation factor (CO₂/H₂=5-7, CH₄/H₂=4-9). These results might be caused by the surface diffusion or/and blocking effects of adsorbed molecules in the unsupport. And these results could be explained by surface diffusion. This paper is dedicated to Professor Hyun-Ku Rhee on the occasion of his retirement from Seoul National University.     

Electrical conductivity and structure of glasses in the Na<Subscript>2</Subscript>O-Na<Subscript>2</Subscript>S-P<Subscript>2</Subscript>O<Subscript>5</Subscript> and Na<Subscript>2</Subscript>S-P<Subscript>2</Subscript>S<Subscript>5</Subscript> systems

The glasses, in which oxygen was partially replaced with sulfur, have been synthesized in the Na₂O-P₂O₅-Na₂S system. The chemical and chromatographic analyses of the glasses synthesized have been performed. The temperature-concentration dependences of electrical conductivity of the glasses have been studied over a wide temperature range; the glass transition temperatures and the nature of charge carriers have been determined. The IR spectra and Raman spectra have been recorded at room temperature; the density and microhardness of the glasses and ultrasound velocity have been measured. A comparison of the electrical conductivities of the investigated glasses with those of the earlier studied glasses in the Na₂O-P₂O₅ system has shown their fair coincidence. The introduction of sodium sulfide into the Na₂O-P₂O₅ system is accompanied by an approximately threefold increase in electrical conductivity, although the concentrations of charge carriers (sodium ions) in the glasses amount to ∼17 and ∼26 mmol/cm³, respectively. The rise in electrical conductivity has been assumed to be caused by the increase in the degree of dissociation of polar structural chemical units including sulfide ions and by the higher mobility of sodium ions in the oxygen-free matrix.     

Synthesis of a New Layered Rb<Subscript>2</Subscript>Nd<Subscript>2</Subscript>Ti<Subscript>3</Subscript>O<Subscript>10</Subscript> Oxide,Its Hydration and Protonation

A new perovskite-like oxide (Rb₂Nd₂Ti₃O₁₀) is synthesized by the ceramic method. Its stability in a humid atmosphere and aqueous solutions of different acidities is investigated. Under these conditions, the formation of hydrated and protonated compounds is revealed. The parameters of the unit cell of the Rb₂Nd₂Ti₃O₁₀ oxide and its derivatives and the degree of rubidium substitution by protons for the obtained protonated phases are determined.     

Enhanced cyclic stability of CO<Subscript>2</Subscript> adsorption capacity of CaO-based sorbents using La<Subscript>2</Subscript>O<Subscript>3</Subscript> or Ca<Subscript>12</Subscript>Al<Subscript>14</Subscript>O<Subscript>33</Subscript> as additives

To improve the stability of CaO adsorption capacity for CO₂ capture during multiple carbonation/calcination cycles, modified CaO-based sorbents were synthesized by sol-gel-combustion-synthesis (SGCS) method and wet physical mixing method, respectively, to overcome the problem of loss-in-capacity of CaO-based sorbents. The cyclic CaO adsorption capacity of the sorbents as well as the effect of the addition of La₂O₃ or Ca₁₂Al₁₄O₃₃ was investigated in a fixed-bed reactor. The transient phase change and microstructure were characterized by X-ray diffraction (XRD) and field emission scanning electron microscopy (FSEM), respectively. The experimental results indicate that La₂O₃ played an active role in the carbonation/calcination reactions. When the sorbents were made by wet physical mixing method, CaO/Ca₁₂Al₁₄O₃₃ was much better than CaO/La₂O₃ in cyclic CO₂ capture performance. When the sorbents were made by SGCS method, the synthetic CaO/La₂O₃ sorbent provided the best performance of a carbonation conversion of up to 93% and an adsorption capacity of up to 0.58 g-CO₂/g-sorbent after 11 cycles.     

Enhanced functionalization of Mn<Subscript>2</Subscript>O<Subscript>3</Subscript>@SiO<Subscript>2</Subscript> core-shell nanostructures

Core-shell nanostructures of Mn₂O₃@SiO₂, Mn₂O₃@amino-functionalized silica, Mn₂O₃@vinyl-functionalized silica, and Mn₂O₃@allyl-functionalized silica were synthesized using the hydrolysis of the respective organosilane precursor over Mn₂O₃ nanoparticles dispersed using colloidal solutions of Tergitol and cyclohexane. The synthetic methodology used is an improvement over the commonly used post-grafting or co-condensation method as it ensures a high density of functional groups over the core-shell nanostructures. The high density of functional groups can be useful in immobilization of biomolecules and drugs and thus can be used in targeted drug delivery. The high density of functional groups can be used for extraction of elements present in trace amounts. These functionalized core-shell nanostructures were characterized using TEM, IR, and zeta potential studies. The zeta potential study shows that the hydrolysis of organosilane to form the shell results in more number of functional groups on it as compared to the shell formed using post-grafting method. The amino-functionalized core-shell nanostructures were used for the immobilization of glucose and L -methionine and were characterized by zeta potential studies.     

Mechanism of reaction-front propagation in the Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> + 2Al mixture

Results of a combustion study of a powder mixture of Cr₂O₃ and Al burnt in an argon flow are reported. The combustion process is affected by a pressure difference along the filler by evacuating one end of the reaction cell. Effects of the initial density, gasifiable additive (borax or sodium carbonate), and pressure difference on specific features of the combustion process are examined. The data obtained were interpreted within the convective-conductive combustion theory of heterogeneous condensed systems.     

Effect of Alumina Reactivity on the Densification and Properties of Al2O3–Cr2O3 Refractories

Alumina‐chrome (Al₂O₃–Cr₂O₃) refractories with Al₂O₃:Cr₂O₃ molar ratio 1:1 were synthesized in the temperature range of 1400–1700°C by conventional solid–oxide reaction route. The effect of different aluminas (viz., hydrated and calcined) on the densification, microstructure, and properties of Al₂O₃–Cr₂O₃ refractories was investigated without changing the Cr₂O₃ source. The starting materials were analyzed to determine the chemical composition, mineralogy, density, surface area, and particle size. Sintered materials were characterized in terms of densification, phase assemblage, and mechanical strength at room temperature and at higher temperatures. Microstructural evolution at different sintering temperature was correlated with sintering characteristics. It can be concluded that the Al₂O₃–Cr₂O₃ refractories prepared with hydrated alumina as Al₂O₃ source show better densification and hot mechanical strength than corresponding calcined variety.     

Ni/La<Subscript>2</Subscript>O<Subscript>3</Subscript>-ZrO<Subscript>2</Subscript> catalyst for hydrogen production from steam reforming of acetic acid as a model compound of bio-oil

Hydrogen production from steam reforming of acetic acid was investigated over Ni/La₂O₃-ZrO₂ catalyst. A series of Ni/La₂O₃-ZrO₂ catalysts were synthesized by sol-gel method coupled with wet impregnation, which was characterized by XRD, BET, TEM, EDS, TG, SEM and TPR. Catalytic activity of Ni/La₂O₃-ZrO₂ was evaluated by steam reforming of acetic acid at the temperature range of 550-750 °C. The tetragonal phase La_0.1Zr_0.9O_1.95 is formed through the doping of La₂O₃ into the ZrO₂ lattice and nickel species are highly dispersed on the support with high specific surface area. H₂ yield and CO₂ yield of Ni/La₂O₃-ZrO₂ catalyst with 15%wt Ni reaches 89.27% and 80.41% at 600 °C, respectively, which is attributed to high BET surface area and sufficient Ni active sites in strong interaction with the support. 15%wt Ni supported on La₂O₃-ZrO₂ catalyst maintains relatively stable catalytic activities for a period of 20 h.     

Synthesis and properties of binary spinels in a NiO–CuO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–Cr<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The conditions for the formation of a spinel structure from a NiO–CuO–Fe₂O₃–Cr₂O₃ oxide mixture using several technological approaches have been examined. Addition of KCl is accompanied with the formation of two spinel-like phases, whereas in the absence of KCl just one solid solution of nickel–copper ferrite–chromite with the structure of a cubic spinel is formed. At the temperature of thermal treatment of 900°C, the presence of an admixture phase of the delafossite (CuCrO₂) type was established. The conditions for the fabrication of samples containing two spinel phases (cubic and tetragonal) characterized with the most developed surface and manifesting = increased catalytic activity in the reaction of the decomposition of an organic substance by hydrogen peroxide have been formulated. The studied features of spinel synthesis can be of interest for developing materials with an active surface promising for application as adsorbents of catalysts and sensors.     

Synthetic spinels of the system MgO-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Synthetic spinels of the system MgO-Cr₂O₃-Al₂O₃-Fe₂O₃ are considered and the desirability of organizing their production for the refractory industry is demonstrated. Translated from Novye Ogneupory, No. 6, pp. 32–35, June 2008.     

Phase Equilibria in the Gd<Subscript>2</Subscript>O<Subscript>3</Subscript>-SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript> System

The phase equilibria are investigated and the phase diagram is constructed for the Gd₂O₃-SrAl₂O₄ pseudobinary join of the Gd₂O₃-SrO-Al₂O₃ ternary oxide system. One ternary compound, namely, Gd₂SrAl₂O₇, is revealed in the Gd₂O₃-SrAl₂O₄ join. It is found that this compound undergoes congruent melting.     

Effects of adding B<Subscript>2</Subscript>O<Subscript>3</Subscript> as a flux on phosphorescent properties in synthesis of SrAl<Subscript>2</Subscript>O<Subscript>4</Subscript>: (Eu<Superscript>2+</Superscript>, DY<Superscript>3+</Superscript> phosphor

SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was prepared by solid state reaction. B₂O₅ as a flux was added in SrAl₂O₄:(Eu ²⁺, Dy³⁺) in order to accelerate a solid state reaction. In this paper, the effects of B₂O₃ on the crystal structure and the phosphorescent properties of the material have been evaluated. The synthesized phosphor exhibited a broad band emission spectrum peaking at 520 nm, and the spectrum peak showed little effect by the B₂O₃ contents. The maximum afterglow intensity of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was obtained at the B₂O₃ content of 5%. Adding the B₂O₃ caused uniform distortion to the crystal structure of the phosphor and resulted in reducing the lengths of a and c axes and Β angle of the SrAl₂O₄ crystal. The uniform distortion was accompanied with crystal defects which can trap the holes generated by the excitation of Eu²⁺ ions. The afterglow characteristic of the SrAl₂O₄: (Eu²⁺, Dy³⁺) phosphor was thus enhanced.