Effect of Maltodextrin Addition during Spray Drying of Tomato Pulp in Dehumidified Air: I. Drying Kinetics and Product Recovery

This work investigates the effect of maltodextrin addition on the drying kinetics and the stickiness during spray drying of tomato pulp in dehumidified air. A pilot-scale spray dryer was employed for the spray-drying process. The modification made to the original design consisted in connecting the spray dryer inlet air intake to an absorption air dryer. Twenty-seven different experiments were conducted varying the dextrose equivalent (DE) of the maltodextrin, the ratio (tomato pulp solids)/(maltodextrin solids), and the inlet air temperature. Data for the residue remaining on the walls were gathered. Furthermore, the effect of maltodextrin addition on the drying kinetics and the stickiness of the product was investigated using a numerical simulation of the spray-drying process modeled with the computational fluid dynamics (CFD) code Fluent. The code was used to determine the droplet moisture content and temperature profiles during the spray-drying experiments conducted in this work. The stickiness was determined by comparing the droplet temperature with its surface layer glass transition temperature (T_g ). The T_g was determined using a weighted mean rule based on the moisture content profiles calculated by the CFD code and the experimental data of T_g , which were obtained for the different tomato pulp and maltodextrin samples and fitted to the Gordon and Taylor model.     

A New Technique for Spray-Dried Encapsulation of Lycopene

A new technique for lycopene microencapsulation by spray drying using dehumidified air as the drying medium was developed and the optimum operating conditions for encapsulation efficiency were determined. A pilot-scale spray dryer was employed for the spray-drying process. The modification made to the original design consisted of connecting the dryer inlet air intake to an absorption air dryer. The dextrose equivalent (DE) of maltodextrin, ratio of core to wall material, feed temperature, inlet air temperature, drying air flow rate, and compressed air flow rate were the factors investigated with respect to encapsulation efficiency. The resulting microcapsules were evaluated in terms of moisture content, bulk density, rehydration ability, lycopene isomerization, and storage stability. The optimum operating conditions were found to be as follows: ratio of core to wall material, 1:3.3; feed temperature, 52°C; inlet air temperature, 147°C. Under these conditions, the maximum encapsulation efficiency was about 93%. The use of dehumidified air was proven to be an effective way of increasing lycopene encapsulation efficiency.     

Combined Crystallization and Drying in a Pilot-Scale Spray Dryer

Combined crystallization and drying of lactose solutions was performed in a pilot-scale spray dryer over a wide range of operating conditions. The effect of different parameters, including temperature, moisture content, atomizing air flow rate, liquid feed rate, main drying air flow rate, and particle size, on the degree of crystallinity of the spray-dried powders was analyzed. Water-induced crystallization (WIC) and modulated differential scanning calorimetry (MDSC) were used to assess the effect of these parameters on the degree of crystallinity of the spray-dried powders. The particles were characterized in terms of the final moisture content using WIC and distinctive differences in the peak heights, which are indicative of the particle crystallinity, were found for spray-dried particles using different drying conditions, supporting the results from MDSC. MDSC showed that decreasing the inlet air temperature by 40°C increased the degree of crystallinity in the particles threefold from 22 to 72%. A decrease in the inlet air temperature may decrease the particle temperature, resulting in wetter particles, and a lower temperature meant a longer particle drying time and allowed the particles to rearrange themselves into a more crystalline form. Up to 72% crystallinity is achievable in a pilot-scale spray dryer by suitable adjustment of the operating conditions. The results suggest differences in the rate of crystallization and particle size between small and pilot-scale spray dryers.     

Spray Drying and Process Optimization of Unclarified Pomegranate (Punica granatum) Juice

In this study, production of pomegranate juice powder using a spray dryer was investigated. To prevent stickiness, maltodextrin dextrose equivalent 6 (DE6) was used as a drying agent. While feed flow rate, feed temperature, and air flow rate were kept constant, air inlet temperature (110–140°C), percentage maltodextrin (MD; maltodextrin dry solids/100 g feed mixture dry solids; 39.08–64.12%), and feed mixture concentration (19.61–44.11 °Brix) were chosen as the independent variables. Product properties investigated included moisture content, hygroscopicity, anthocyanin content, color change, solubility, bulk density, total phenolics content, antioxidant capacity, and sensory properties. The products were produced with high yield (86%) and high antioxidant activity (77%). MD and drying temperature were found to be the most important variables in production of pomegranate juice powders. Because total color change (ΔE), bulk density, antioxidant capacity, and powder yield were affected strongly by the independent variables, these parameters were used in optimization of the process. The optimum temperature, feed mixture concentration, and percentage maltodextrin were 100°C, 30.8 °Brix, and 53.5% MD, respectively. This study revealed that by applying these optimal conditions, pomegranate juice powder with a 55% dry solids yield, 9.78 total color change, 0.35 g/mL bulk density, and 57.8% antioxidant capacity were produced.     

Spray Drying of Raisin Juice Concentrate

Raisin juice concentrate is a natural sweetener in syrup or paste form and it is produced from second-grade dry raisins by leaching them with water. Dried raisin juice, although is easier to handle and has more potential applications than the syrup, is not available in the market. In the present study, raisin juice powder was produced with a lab-scale spray dryer. The problem of stickiness in the drying chamber was overcome through the use of 21 DE, 12 DE, and 6 DE maltodextrins as drying aid agents. For each type of maltodextrin, the dryer operating conditions and the minimum concentration of maltodextrin in the feed, necessary for successful powder production, were determined. The maximum ratio of (raisin juice solids)/(maltodextrin solids) achieved was 67/33 and was made possible with the use of 6 DE maltodextrin. The inlet and outlet drying air temperatures were 110 and 77°C respectively, while the feed contained 40% w/w total solids. The physical and sensory properties of all powders produced were determined and found to be satisfactory, the only exception being their high hygroscopicity.     

Effect of Wall Surface Properties at Different Drying Kinetics on the Deposition Problem in Spray Drying

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

Dr. Carl W. Hall,Founding Editor

Current methods in alleviating the wall deposition problem in spray drying emphasize mainly controlling the stickiness of the drying particles and less attention is placed on the properties of the dryer wall. In this experimental study, the effect of wall surface properties on the deposition mechanism has been investigated. Properties considered in classifying different wall materials were surface energy, roughness, and dielectric properties. The model solution contained sucrose, representing low-molecular-weight sugars commonly encountered in spray drying of fruit and vegetable juices. The effect of wall properties on deposition was explored at different drying rates producing particles of different surface rigidity. Larger surface roughness produced higher deposition fluxes for particles with high impact velocity and moisture. Surface energy and surface roughness were found to have no significant effect for dry rigid particles at the middle and bottom elevation of the drying chamber. However, material with lower surface energy (Teflon) exhibited less deposition for rubbery particles at such elevations. Analysis shows that dielectric wall material (Teflon) tends to enhance deposition of dry particles because of attrition at the surface. Higher wall temperature was found to produce slightly more deposition. The results of this work give a general indication of the effect of wall material on the deposition problem and provide the fundamental understanding for further studies along this line. Proper selection of dryer wall material will provide potential alternatives for reducing the deposition problem.     

A Taguchi approach production of spray-dried whey powder enriched with nanoencapsulated vitamin D3

Abstract

The objective of the present study was to investigate the effect of inlet air temperature of spray drying and different combinations of carrier agents (maltodextrin (MD), gum Arabic (GA), modified starch (MS), and whey protein concentrate (WPC)) on the physicochemical characteristics of spray-dried whey powder, enriched with vitamin D₃ to improve its usage as a functional ingredient. Firstly, vitamin D₃ was nanoencapsulated by nanoliposome prepared with egg yolk lecithin, sesame oil, and glycerol through thin-film dispersion method. The mean particle size of prepared nanoliposomes was 140?nm. Then, the prepared nanocarriers loaded with vitamin D₃ were added into the feed solution and dried through spray dryer. The effect of carrier agent types and inlet air temperature on the physicochemical (moisture content, solubility, porosity, color, and powder yield) and microstructure properties of obtained spray-dried powders were investigated. The optimal carrier agents and condition of spray drying were selected by Taguchi design. Our results showed that the inlet air temperature and carrier agent had significant effects on the characterization of powders. Powders produced by 2% WPC, 3% MS, and 25% MD at 170?°C inlet air temperature showed the highest powder yield (96.4%). Also, the morphology of powders was affected by carrier agent types; increase in MD concentration in feed solution causes to create smoother and spherical spray-dried powder particles.     

Spray Drying of Raisin Juice Concentrate

Raisin juice concentrate is a natural sweetener in syrup or paste form and it is produced from second-grade dry raisins by leaching them with water. Dried raisin juice, although is easier to handle and has more potential applications than the syrup, is not available in the market. In the present study, raisin juice powder was produced with a lab-scale spray dryer. The problem of stickiness in the drying chamber was overcome through the use of 21 DE, 12 DE, and 6 DE maltodextrins as drying aid agents. For each type of maltodextrin, the dryer operating conditions and the minimum concentration of maltodextrin in the feed, necessary for successful powder production, were determined. The maximum ratio of (raisin juice solids)/(maltodextrin solids) achieved was 67/33 and was made possible with the use of 6 DE maltodextrin. The inlet and outlet drying air temperatures were 110 and 77°C respectively, while the feed contained 40% w/w total solids. The physical and sensory properties of all powders produced were determined and found to be satisfactory, the only exception being their high hygroscopicity.     

Effect of spray drying conditions and feed composition on the physical properties of black mulberry juice powder

In this study, the effects of some processing parameters on moisture content, water activity, drying yield, bulk density, solubility, glass transition temperature (T_g), and microstructure of spray dried black mulberry (Morus nigra) juice powders were investigated. A pilot-scale spray dryer was employed for the spray drying process and maltodextrin with different dextrose equivalent (6, 9, and 20DE) and gum Arabic were used as carrier agent. Independent variables were inlet air temperature (110, 130, and 150 °C), compressed air flow rate (400, 600, and 800 L/h), concentration of drying aids (8, 12, and 16%) and percent replacement of maltodextrin (6 and 9DE) by gum Arabic and maltodextrin 20DE (25, 50, and 75%). Between the different drying aids, maltodextrin 6DE shows the best effect on the properties of black mulberry juice powders. The process drying yield ranges from 45 to 82%. The highest drying yield (82%) and solubility (87%) refer to the blend of maltodextrin 6DE and gum Arabic. The lowest moisture content powders (1.5%) produced at the compressed air flow rate of 800 L/h. Inlet air temperature negatively influenced the bulk density due to the increase of powder's porosity. The lower the bulk density, the higher the solubility of powder is. With regard to morphology, powders produced with maltodextrin and gum Arabic presented the smallest size.     

An Experimental Investigation of Lime Juice Drying in a Pilot Plant Spray Dryer

One of the major problems in spray drying of fruit juices such as lime juice is stickiness and thermoplasticity of their compositions. Lime juice consists of invert sugars and citric acid, which have low glass transition temperatures. Due to this characteristic, the particles stick on the dryer wall upon their collision with it. As a result, drying of these materials is very difficult. In order to solve this problem, various percent of silicon dioxide and maltodextrin (DE5), based on total soluble solid content of lime juice, have been used to reach a suitable drying condition. A cool chamber wall spray dryer was used in this investigation in order to decrease the probability of particles stickiness on the wall. Our investigation revealed that an addition of 10% silicon dioxide and 20% maltodextrin (DE5) to lime juice is the optimum amount for a complete and successful drying of lime juice. Sampling of particles from different longitudinal distances in the dryer tower is carried out to find the particle moisture contents as they fly downward in the dryer. The results show a very fast decrease in entrance moisture contents. Based on our experimental data, the variation of moisture contents are presented as a function of radial distance from central line and longitudinal distance from the entrance region.     

An Experimental Investigation of the Wall Deposition of Milk Powder in a Pilot-Scale Spray Dryer

A pilot-scale, co-current spray dryer has been used to investigate the effect of varying the swirl vane angle for the inlet air, inlet air temperature and liquid feed flowrate on the wall deposition flux of skim milk powder. The spray dryer was a cylinder-on-cone unit with a diameter of 0.8 m and a height of 2 m. It was fitted with adjustable swirl vanes surrounding a Delavan GA1 two-fluid atomizer. Swirl vane angles of 0, 25, and 30°, inlet air temperatures of 170, 200, and 230°C and feed flowrates of 1.4, 1.6 and 1.8 kg h^-1 were used. Inlet air swirl was found to significantly influence the wall deposition flux, with the highest swirl vane angle of 30° giving rise to the largest wall deposition flux. The difference between the particle and sticky-point temperatures of the skim milk powder was also found to be important in influencing the wall deposition flux. The wall deposition flux was the highest, at 16 g m^-2 h^-1, when the outlet particle temperature was furthest above the sticky-point temperature, and this occurred at the lowest value of the inlet air temperature (170°C) and highest product moisture content. No significant effect on the wall deposition flux was evident when using a nonstick food grade material (nylon), adhesive tape or stainless steel as the surface materials for the wall deposition tests. Therefore, it is likely that cohesion occurs at a similar rate to adhesion in the wall deposition of milk powder. Grounding the spray dryer also did not have a significant effect on the wall deposition flux. Relating the wall deposition flux to the sticky-point curve in this way suggests that the same trends (increased wall deposition fluxes above the sticky-point curve) may apply for other materials as well.     

An Experimental Investigation of Lime Juice Drying in a Pilot Plant Spray Dryer

One of the major problems in spray drying of fruit juices such as lime juice is stickiness and thermoplasticity of their compositions. Lime juice consists of invert sugars and citric acid, which have low glass transition temperatures. Due to this characteristic, the particles stick on the dryer wall upon their collision with it. As a result, drying of these materials is very difficult. In order to solve this problem, various percent of silicon dioxide and maltodextrin (DE5), based on total soluble solid content of lime juice, have been used to reach a suitable drying condition. A cool chamber wall spray dryer was used in this investigation in order to decrease the probability of particles stickiness on the wall. Our investigation revealed that an addition of 10% silicon dioxide and 20% maltodextrin (DE5) to lime juice is the optimum amount for a complete and successful drying of lime juice. Sampling of particles from different longitudinal distances in the dryer tower is carried out to find the particle moisture contents as they fly downward in the dryer. The results show a very fast decrease in entrance moisture contents. Based on our experimental data, the variation of moisture contents are presented as a function of radial distance from central line and longitudinal distance from the entrance region.     

The effects of the different drying conditions and the amounts of maltodextrin addition during spray drying of sumac extract

Sumac (Rhus coriaria L.) is a spice which is obtained by grinding of whole sumac berries. The aim of this study is to survey the feasibility of a spray dried sumac extract process along with the effects of adding maltodextrin (MD) and the effects of the inlet and outlet temperatures of the drying air on the properties of the powdered product obtained from the spray drying of the sumac extract. A pilot scale spray dryer was used for the production of the sumac extract powder. The inlet/outlet air temperatures were adjusted to 160/80, 180/90, and 200/100 °C where outlet air temperature was controlled by regulating the feed flow rate. The total soluble solid content of the sumac extract was measured as 3.5% and adjusted to 10, 15, 20, and 25% (w/w) with the addition of maltodextrin with a Dextrose Equivalence (DE) of 10–12. The obtained powders were analyzed for moisture content, water activity, ash content, pH, colour, total phenolic content, antioxidant activity, bulk density, wettability, solubility, and microstructure.Depending on the analysis of the results, the temperature, maltodextrin, and the interaction between temperature and maltodextrin have an important effect on the performed analysis (P < 0.05) except for the pH value analysis (P > 0.05).     

Comparative efficiency of maltodextrin and protein in the production of spray-dried tamarind pulp powder

The potential of maltodextrin (DE 20) and soya protein isolate (SPI) in spray drying of tamarind pulp was compared. Powder recovery was zero when the tamarind pulp was spray dried alone. A greater amount of maltodextrin (MD; 55%) was required for successful spray drying of tamarind pulp, whereas a small amount of SPI (20%) was needed for the same purpose. The study revealed that the mechanism for the increase in product recovery with the addition of MD is due to the increase in overall glass transition temperature of tamarind pulp powder. However, using SPI, preferential migration of the protein to the surface of droplets/particles resulting in the formation of a glassy skin was responsible for a reduction in stickiness between the particles and dryer wall and hence increased the powder recovery. The potential of SPI in reducing powder hygroscopicity was almost comparable to that of MD, confirming its efficiency as a drying aid. Tamarind pulp powders produced with SPI had a larger particle size with a wrinkled particle surface morphology and high flowability compared to powders produced with MD. The study showed the excellent potential of SPI as a drying aid in production of quality tamarind pulp powder.     

Effect of Maltodextrin Addition during Spray Drying of Tomato Pulp in Dehumidified Air: II. Powder Properties

This work investigates the effect of maltodextrin addition on the main powder properties during spray drying of tomato pulp in dehumidified air. A pilot-scale spray dryer was employed for the spray-drying process. The modification made to the original design consisted in connecting the spray dryer inlet air intake to an absorption air dryer. 21 DE, 12 DE, and 6 DE maltodextrins were used as drying agents. Tomato pulp was spray dried at inlet air temperatures of 130, 140, and 150°C and (tomato pulp solids)/(maltodextrin solids) ratios of 4.00, 1.00, and 0.25. The tomato powders were analyzed for rheological properties, moisture content, bulk density, solubility, hygroscopicity, and degree of caking. It was found that maltodextrin addition improved powder hygroscopicity, caking, and solubility, whereas it deteriorated slightly its moisture content and density. In addition, analysis of experimental data yielded correlations between powder properties and the above-mentioned variable operating conditions. Regression analysis was used to fit a full second-order polynomial, reduced second-order polynomials, and linear models to the data of each of the properties evaluated. F values for all reduced and linear models with an R ² ≥ 0.70 were calculated to determine if the models could be used in place of full second-order polynomials.     

Effects of Spray-Drying Conditions on the Physicochemical Properties of Blackberry Powder

The purpose of this work was to study the effects of spray-drying conditions on the physicochemical characteristics of blackberry powder using a central composite rotatable design. Inlet air temperature (140–180°C) and maltodextrin concentration (5–25%) were employed as independent variables. Moisture content, hygroscopicity, anthocyanin retention, color, powder morphology, and particle size were analyzed. A higher inlet air temperature significantly increased the hygroscopicity of the powder, decreased its moisture content, and led to the formation of larger particles with smooth surfaces. Powders produced with higher maltodextrin concentrations were less hygroscopic, slightly lighter and less red, and had a lower moisture content. Anthocyanin retention was mainly affected by drying temperature due to the heat sensitivity of the pigment. The optimal processing conditions were an inlet air temperature of 140–150°C and maltodextrin concentration of 5–7%. Overall, these results indicate that good quality powders can be obtained by spray drying, with potential applications for the food industry.     

Spray Drying of Tomato Pulp: Effect of Feed Concentration

The effect of feed concentration on spray drying of tomato pulp preconcentrated to 78, 82, and 86% wet basis is investigated in two spray drying systems: a pilot scale spray dryer (Buchi, B-191) with cocurrent regime and a two-fluid nozzle atomizer, and the same connected with an absorption air dryer (Ultrapac 2000). Data for the residue on the chamber and cyclone walls were gathered and two types of efficiencies were calculated as an indication of the spray dryer performance. Tomato powders were analyzed for moisture, particle size, and bulk density. In both spray drying systems, with increases in tomato pulp concentration overall thermal efficiency, evaporative efficiency, material loss in the cyclone, powder moisture content, and bulk density decreased, whereas powder particle size increased. On the contrary, the effect of feed solids content on residue formation and product recovery was dependent on the drying medium. In the standard dryer, the higher the feed concentration, the higher was the residue accumulation, and the lower the product recovery, whereas in the modified system increases in pulp concentration resulted in lower residue formations and higher product yields.     

Influence of Spray Drying Conditions on Physicochemical Properties of Chicken Meat Powder

The influence of spray-drying conditions on the physicochemical properties of chicken meat hydrolysate powder was studied in this work. Enzymatic reaction, using Alcalase® (Novozymes, Bagsvaerd, Denmark), was carried out at 52.5°C, 4.2 g enzyme/100 g protein, and pH of 8.0 to obtain protein hydrolysate. The spray drying was carried out on a laboratory spray dryer and maltodextrin 10DE was used as carrier agent. A central composite rotatable design was used to evaluate the effect of the independent variables inlet air temperature, feed flow, and maltodextrin concentration on the responses powder moisture content, bulk density, mean particle diameter, and hygroscopicity. All variables had a significant effect on the properties and morphology of protein hydrolysate powder.     

Evolution of particle properties during spray drying in relation with stickiness and agglomeration control

Spray drying consists in atomizing a solution into liquid drops in a hot air flow to get dry solid particles after solvent evaporation. The convective drying at the drop surface leads to a very fast evolution of temperature and water content due to initial high differences of temperature and water vapour pressure between the drop surface and the drying air. During drying, the drop surface viscosity is increasing due to potentially amorphous polymers reaching a rubbery state. The drop surface is becoming sticky with consequences on wall deposit. This sticky behaviour which appears in the range of 10 to 30 °C above the glass transition temperature Tg, may be utilized in a positive way for agglomeration of drying particles with dry powders, either recycled fines or new dry powder, to improve instant properties.The evolution of water content of drops along drying, is deduced from measurements of air temperature and relative humidity, at different places in the dryer and used to predict the drying and sticky behaviour of two maltodextrin solutions (DE12 and DE21) with different Tg. The studied parameters in a co-current spray dryer were the inlet air temperature (144, 174, 200 °C) and flow rate (80 and 110 kg h^− 1), the liquid flow rate (1.8, 3.6 and 5.4 kg h^− 1) and the rotation speed of the wheel atomizer. The results on particle water content combined with the evolution of Tg showed that particles are sticky close to the atomiser for the two maltodextrins, and also along the chamber for maltodextrin DE21 due to its lower Tg. The introduction of dry particles at different places in the chamber allowed validating the method to control agglomeration.